Top

Journal of Materials Engineering and Performance

Published in:

15-11-2023 | Review

Recent Developments in Cladding and Coating Using Cold Metal Transfer Technology

Authors: Bappa Das, Biranchi N. Panda, Faladrum Sharma, Uday S. Dixit

Published in: Journal of Materials Engineering and Performance | Issue 7/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

One of the modern welding techniques for joining dissimilar as well as similar materials is cold metal transfer (CMT). Thanks to low heat input in the process, no-spatter welding is guaranteed. Regulated metal deposition in CMT improves the aesthetics of the weld bead. This review article critically analyzes CMT cladding techniques, cladding types and applications. Several combinations of base metal and cladding material have been covered in detail with particular emphasis to microstructure and mechanical properties. CMT cladding has made it feasible to clad steel and aluminum satisfactorily. It surpasses several cladding techniques as per literature. In fact, CMT cladding is an efficient additive manufacturing technology and finds application in the automotive, defense and power plants sectors. There are several issues worth researching in cladding and coating by CMT for enhancing the overall sustainability of the processes. Based on the limited experimental data in the literature, some empirical expressions are established between performance and process parameters. Particularly, it is noted that dilution in cladding is a linear function of heat input. There is enough scope to carry out physics-based modeling and extensive experimentation for verifying the empirical relations and update them. Modeling and simulation can supplement experimental research effectively.

previous article Announcing the Journal of Materials Engineering and Performance 2023 Editor’s Choice Selections

next article Tension–Compression Flow Asymmetry as a Function of Alloy Composition in the Al-Si System

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

S. Selvi, A. Vishvaksenan, and E. Rajasekar, Cold Metal Transfer (CMT) Technology - An Overview, Def. Technol., 2018, 14, p 28–44. https://doi.org/10.1016/j.dt.2017.08.002CrossRef

H. Mindivan, Wear Behavior of Plasma and HVOF Sprayed WC-12Co + 6% ETFE Coatings on AA2024-T6 Aluminum Alloy, Surf. Coat. Technol., 2010, 204, p 1870. https://doi.org/10.1016/j.surfcoat.2009.10.050CrossRef

M. Villa, S. Dosta, and J.M. Guilemany, Optimization of 316L Stainless Steel Coatings on Light Alloys Using Cold Gas Spray, Surf. Coat. Technol., 2013, 235, p 220–225. https://doi.org/10.1016/j.surfcoat.2013.07.036CrossRef

A. Sova, S. Grigoriev, A. Okunkova, and I. Smurov, Cold Spray Deposition of 316L Stainless Steel Coatings on Aluminum Surface with Following Laser Post-Treatment, Surf. Coat. Technol., 2013, 235, p 283–289. https://doi.org/10.1016/j.surfcoat.2013.07.052CrossRef

J. Zhou, K. Ma, C.X. Li, M. Yasir, X.T. Luo, and C.J. Li, Microstructures of Aluminum Surfaces Reinforced with 316L Stainless Steel Particles via High-Speed Particle Injection and the Resulting Double Strengthening Mechanism, Surf. Coat. Technol., 2020, 385, 125380. https://doi.org/10.1016/j.surfcoat.2020.125380CrossRef

W.G. Jiru, M.R. Sankar, and U.S. Dixit, Laser Surface Alloying of Copper, Manganese, and Magnesium with Pure Aluminum Substrate, J. Mater. Eng. Perform., 2016, 25, p 1172–1181. https://doi.org/10.1007/s11665-016-1922-xCrossRef

W.G. Jiru, M.R. Sankar, and U.S. Dixit, Laser Surface Alloying of Aluminum for Improving Acid Corrosion Resistance, J. Inst. Eng. India Ser. C, 2019, 100, p 481–492. https://doi.org/10.1007/s40032-018-0452-8CrossRef

N. Murugan and R.S. Parmar, Effects of MIG Process Parameters on the Geometry of the Bead in the Automatic Surfacing of Stainless Steel, J. Mater. Process. Technol., 1994, 41, p 381–398. https://doi.org/10.1016/0924-0136(94)90003-5CrossRef

D. Deng, R. Chen, Q. Sun, and X. Li, Microstructural Study of 17–4PH Stainless Steel after Plasma-Transferred Arc Welding, Materials, 2015, 8, p 424–434. https://doi.org/10.3390/ma8020424CrossRefPubMedPubMedCentral

10.

K. Gurumoorthy, M. Kamaraj, K.P. Rao, and S. Venugopal, Microstructure and Wear Characteristics of Nickel Based Hardfacing Alloys Deposited by Plasma Transferred Arc Welding, Mater. Sci. Technol., 2006, 22, p 975–980. https://doi.org/10.1179/174328406X100734CrossRef

11.

Z. Li, L. Chai, Y. Tang, C. Zhang, L. Qi, K. Zhang, C. Peng, and C. Huang, 316L Stainless Steel Repaired Layers by Weld Surfacing and Laser Cladding on a 27SiMn Steel: A Comparative Study of Microstructures, Corrosion, Hardness and Wear Performances, J. Mater. Res. Technol., 2023, 23, p 2043–2053. https://doi.org/10.1016/j.jmrt.2023.01.162CrossRef

12.

K. Kanishka and B. Acherjee, A Systematic Review of Additive Manufacturing-Based Remanufacturing Techniques for Component Repair and Restoration, J. Manuf. Process., 2023, 89, p 220–283. https://doi.org/10.1016/j.jmapro.2023.01.034CrossRef

13.

W.B. Lee, M. Schmuecker, U.A. Mercardo, G. Biallas, and S.B. Jung, Interfacial Reaction in Steel-Aluminum Joints Made by Friction Stir Welding, Scr. Mater., 2006, 55, p 355–358. https://doi.org/10.1016/j.scriptamat.2006.04.028CrossRef

14.

K.J. Lee, S. Kumai, T. Arai, and T. Aizawa, Interfacial Microstructure and Strength of Steel/Aluminum Alloy Lap Joint Fabricated by Magnetic Pressure Seam Welding, Mater. Sci. Eng. A, 2007, 471, p 95–101. https://doi.org/10.1016/j.msea.2007.04.033CrossRef

15.

T. Murakami, K. Nakata, H. Tong, and M. Ushio, Dissimilar Metal Joining of Aluminum to Steel by MIG arc Brazing Using Flux Cored Wire, ISIJ Int., 2003, 43, p 1596–1602. https://doi.org/10.2355/isijinternational.43.1596CrossRef

16.

A. Mathieu, J. Viala, E. Cicala, S. Matte, and D. Grevey, Laser Brazing of a Steel /Aluminium Assembly with Hot Fiiler Wire(88% Al, 12% Si), Mater. Sci. Eng. A, 2006, 436, p 19–28. https://doi.org/10.1016/j.msea.2006.07.099CrossRef

17.

S. Meco, G. Pardal, A. Eder, and L. Quintino, Software Development for Prediction of the Weld Bead in CMT and Pulsed-MAG Processes, Int. J. Adv. Manuf. Technol., 2013, 64, p 171–178. https://doi.org/10.1007/s00170-012-3990-xCrossRef

18.

R. Cao, J.H. Chang, X.H. Zhu, G.J. Mao, Q.W. Xu, Y. Shi, J.H. Chen, and P.C. Wang, Investigation of Wire Selection for CMT Plug Joining Mg AZ31-to-Galvanized Steel, J. Manuf. Process., 2018, 32, p 65–76. https://doi.org/10.1016/j.jmapro.2018.01.022CrossRef

19.

P. Wang, R. Cao, J.H. Sun, and J.H. Chen, Cold Metal Transfer Joining of Aluminum AA6061-T6-to- Galvanized Boron Steel, J. Manuf. Sci. Eng., 2016, 136, p 1–10. https://doi.org/10.1115/1.4028012CrossRef

20.

H.T. Zhang, J.C. Feng, and P. He, Interfacial Phenomena of Cold Metal Transfer (CMT) Welding of Zinc Coated Steel and Wrought Aluminium, Mater. Sci. Technol., 2008, 24, p 1346–1349. https://doi.org/10.1179/174328407X213152CrossRef

21.

C.G. Pickin, and K. Young, Evaluation of Cold Metal Transfer (CMT) Process for Welding Aluminium Alloy, Sci. Technol. Weld. Join. Weld. Join., 2006, 11, p 583–586. https://doi.org/10.1179/174329306X120886CrossRef

22.

G. Mou, X. Hua, D. Wu, Y. Huang, W. Lin, and P. Xu, Microstructure, and Mechanical Properties of Cold Metal Transfer Welding-Brazing of Titanium Alloy (TC4) to Stainless Steel (304L) Using V-Shaped Groove Joints, J. Mater. Process. Technol., 2018, 266, p 696–706. https://doi.org/10.1016/j.jmatprotec.2018.09.019CrossRef

23.

K. Furukawa, New CMT arc Welding Process – Welding of Steel to Aluminium Dissimilar Metals and Welding of Super-Thin Aluminium Sheets, Weld. Int., 2006, 20(6), p 440–445. https://doi.org/10.1533/wint.2006.3598CrossRef

24.

C.G. Pickin, S.W. Williams, and M. Lunt, Characterisation of the Cold Metal Transfer (CMT) Process and its Application for Low Dilution Cladding, J. Mater. Process. Technol., 2011, 211, p 496–502. https://doi.org/10.1016/j.jmatprotec.2010.11.005CrossRef

25.

Y. Zhao, Y. Jia, S. Chen, J. Shi, and F. Li, Process Planning Strategy for Wire-Arc Additive Manufacturing: Thermal Behavior Considerations, Addit. Manuf., 2020, 32, 100935. https://doi.org/10.1016/j.addma.2019.100935CrossRef

26.

N.P. Kumar, S.A. Vendan, and N.S. Shanmugam, Investigations on the Parametric Effects of Cold Metal Transfer Process on the Microstructural Aspects in AA6061, J. Alloys Compd., 2016, 658, p 255–264. https://doi.org/10.1016/j.jallcom.2015.10.166CrossRef

27.

R.V. Talalaev, R. Veinthal, A. Laansoo, and M. Sarkans, COLD Metal Transfer (CMT) Welding of Thin Sheet Metal Products, Est. J. Eng., 2012, 18, p 243. https://doi.org/10.3176/ENG.2012.3.09CrossRef

28.

P. Luchtenberg, P.T.D. Campos, P. Soares, C.A.H. Laurindo, O. Maranho, and R.D. Torres, Effect of Welding Energy on the Corrosion and Tribological Properties of Duplex Stainless-Steel Weld Overlay Deposited by GMAW/CMT Process, Surf. Coat. Technol., 2019, 375, p 688–693. https://doi.org/10.1016/j.surfcoat.2019.07.072CrossRef

29.

H.T. Zhang, J.C. Feng, P. He, B.B. Zhang, J.M. Chen, and L. Wang, The Arc Characteristics and Metal Transfer Behaviour of Cold Metal Transfer and its use in Joining Aluminum to Zinc-Coated Steel, Mater. Sci. Eng. A, 2009, 499, p 111–113. https://doi.org/10.1016/j.msea.2007.11.124CrossRef

30.

R. Cao, G. Yu, J.H. Chen, and P.C. Wang, Cold Metal Transfer Joining Aluminium Alloys-to-Galvanized Mild Steel, J. Mater. Process. Technol., 2013, 213, p 1753–1763. https://doi.org/10.1016/j.jmatprotec.2013.04.004CrossRef

31.

G.D.J. Ram, A.V. Reddy, K.P. Rao, and M. Reddy, Microstructure and Mechanical Properties of Inconel 718 Electron Beam Welds, Mater. Sci. Technol., 2005, 21(10), p 1132–1138. https://doi.org/10.1179/174328405X62260CrossRef

32.

G.H.S.F.L. Carvalho, G. Venturini, G. Campatelli, and E. Galvanetto, Development of Optimal Deposition Strategies for Cladding of Inconel 625 on Carbon Steel usIng Wire Arc Additive Manufacturing, Surf. Coat. Technol., 2023, 453, p 129128. https://doi.org/10.1016/j.surfcoat.2022.129128CrossRef

33.

T.B. Thiagarajan, D. Raguraman, and S. Ponnusamy, Optimization of CMT Welding Parameters of Stellite-6 on AISI316L Alloy Using TOPSIS Method, IJIE, 2023, 15, p 161–172.

34.

H. Raushan, A. Bansal, V. Singh, A.K. Singla, J. Singla, A. Omer, J. Singh, D.K. Goyal, N. Khanna, and R.S. Rooprai, Dry Sliding and Slurry Abrasion Behaviour of Wire Arc Additive Manufacturing – Cold Metal Transfer (WAAM-CMT) Cladded Inconel 625 on EN8 Steel, Tribol. Int., 2023, 179, 108176. https://doi.org/10.1016/j.triboint.2022.108176CrossRef

35.

I. Bunaziv, X. Ren, A.B. Hagen, E.W. Hovig, I. Jevremovic, and S.G. Dahl, Laser Beam Remelting of Stainless Steel Plate for Cladding and Comparison with Conventional CMT Process, Int. J. Adv. Manuf. Technol., 2023, 127, p 911–934. https://doi.org/10.1007/s00170-023-11567-yCrossRef

36.

G. Lorenzin and G. Rutili, The Innovative use of Low Heat Input in Welding: Experiences on ‘Cladding’ and Brazing Using the CMT Process, Weld. Inter., 2009, 23(8), p 622–632. https://doi.org/10.1080/09507110802543252CrossRef

37.

G.P. Rajeev, M. Kamaraj, and R.S. Bakshi, Comparison of Microstructure, Dilution and Wear Behavior of Stellite 21 Hardfacing on H13 Steel Using Cold Metal Transfer and Plasma Transferred Arc Welding Processes, Surf. Coat. Technol., 2019, 375, p 383–394. https://doi.org/10.1016/j.surfcoat.2019.07.019CrossRef

38.

G.P. Rajeev, M. Kamaraj, and R.S. Bakshi, Hardfacing of AISI H13 Tool Steel with Stellite 21 Alloy Using Cold Metal Transfer Welding Process, Surf. Coat. Technol., 2017, 326, p 63–71. https://doi.org/10.1016/j.surfcoat.2017.07.050CrossRef

39.

T.B. Thiagarajan and S. Ponnusamy, Effect of Cladding of Stellite-6 Filler Wire on the Surface of ss316l Alloy Through Cold Metal Arc Transfer Process, J. Met. Mater. Miner., 2021, 31(3), p 70–84.CrossRef

40.

P. Varghese, E. Vetrivendan, M.K. Dash, S. Ningshen, M. Kamaraj, and U.K. Mudali, Weld Overlay Coating of Inconel 617M on Type 316 L Stainless Steel by Cold Metal Transfer Process, Surf. Coat. Technol., 2019, 357, p 1004–1013. https://doi.org/10.1016/j.surfcoat.2018.10.073CrossRef

41.

A. Evangeline and P. Sathiya, Cold Metal Arc Transfer (CMT) Metal Deposition of Inconel 625 Superalloy on 316L Austenitic Stainless Steel: Microstructural Evaluation, Corrosion and Wear Resistance Properties, Mater. Res. Express., 2019, 6, 066516. https://doi.org/10.1088/2053-1591/ab0a10CrossRef

42.

O.T. Ola and F.E. Doern, A Study of Cold Metal Transfer Clads in Nickel-Base INCONEL 718 Superalloy, Mater. Des., 2014, 57, p 51–59. https://doi.org/10.1016/j.matdes.2013.12.060CrossRef

43.

H. Kun, D. Lijin, W. Qinying, Z. Huali, L. Yufei, L. Li, and Z. Zhi, Comparison on the Microstructure and Corrosion behavior of Inconel 625 Cladding Deposited by Tungsten Inert Gas and Cold Metal Transfer Process, Surf. Coat. Technol., 2022, 435, 128245. https://doi.org/10.1016/j.surfcoat.2022CrossRef

44.

X. Tang, S. Zhang, X. Cui, C. Zhang, Y. Liu, and J. Zhang, Tribological and Cavitation Erosion Behaviors of Nickel-Based and Iron-Based Coatings Deposited on AISI 304 Stainless Steel by Cold Metal Transfer, J. Mater. Res. Technol., 2020, 9, p 6665–6681. https://doi.org/10.1016/j.jmrt.2020.04.064CrossRef

45.

S. Monika, K. Agnieszka, R. Agnieszka, and R. Bogdan, Microstructure, Microsegregation and Nanohardness of CMT Clad Layers of Ni-Base Alloy on 16Mo3 Steel, J. Alloys Compd., 2018, 751, p 86–95. https://doi.org/10.1016/j.jallcom.2018CrossRef

46.

G.P. Rajeev, M. Kamaraj, and R.S. Bakshi, Al-Si-Mn Alloy Coating on Aluminum Substrate Using Cold Metal Transfer (CMT) Welding Technique, JOM, 2014, 66, p 1061–1067. https://doi.org/10.1007/s11837-014-0970-7CrossRef

47.

Z. Bowen, W. Chao, W. Zhaohui, Z. Laiqi, and G. Qiang, Microstructure and Properties of Al Alloy ER5183 Deposited by Variable Polarity Cold Metal Transfer, J. Mater. Process. Technol., 2019, 267, p 167–176. https://doi.org/10.1016/j.jmatprotec.2018.12.011CrossRef

48.

B. Das, B.N. Panda, and U.S. Dixit, Microstructure, and Mechanical Properties of ER70S-6 Alloy Cladding on Aluminum Using a Cold Metal Transfer Process, J. Mater. Eng. Perform., 2022, 31, p 9385–9398. https://doi.org/10.1007/s11665-022-06937-8CrossRef

49.

F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Koçak, Mechanical Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200(24), p 6770–6782. https://doi.org/10.1016/j.surfcoat.2005CrossRef

50.

V. Luzin, K. Spencer, and M.X. Zhang, Residual Stress and Thermo-Mechanical Properties of Cold Spray Metal Coatings, Acta Mater., 2011, 59(3), p 1259–1270. https://doi.org/10.1016/j.actamat.2010CrossRef

51.

R. Ghelichi, S. Bagherifard, D. MacDonald, I. Fernandez-Pariente, B. Jodoin, and M. Guagliano, Experimental and Numerical Study of Residual Stress Evolution in Cold Spray Coating, Appl. Surf. Sci., 2014, 288, p 26–33. https://doi.org/10.1016/j.apsusc.2013CrossRef

52.

S. Prakash, R. John Felix Kumar, and S. Jerome, Effect of Heat Treatment on Microstructure and Mechanical Properties of CMT Welded Aluminium Alloy 2024, Mater. Today Proc., 2018, 5(13), p 26997–27003. https://doi.org/10.1016/j.matpr.2018CrossRef

53.

P. Kah, R. Suoranta, and J. Martikainen, Advanced Gas Metal Arc Welding Processes, Int. J. Adv. Manuf. Technol., 2013, 67, p 655–674. https://doi.org/10.1007/s00170-012-4513-5CrossRef

54.

F. Jicai, Z. Hongtao, and H. Peng, The CMT Short-Circuiting Metal Transfer Process and its use in Thin Aluminium Sheets Welding, Mater. Des., 2009, 30, p 1850–1852. https://doi.org/10.1016/j.matdes.2008.07.015CrossRef

55.

J.T.M.D. Hasson and L.D.M.V. Otterloo, Surface Engineering with Lasers: Application to Co Based Materials, Surf. Eng., 1997, 13, p 471–482. https://doi.org/10.1179/sur.1997.13.6.471CrossRef

56.

T. Zhao, S. Zhang, Z.Y. Wang, C.H. Zhang, Y. Liu, and C.L. Wu, Modulating Heat Input to Optimize Corrosion and Synergistic Cavitation Erosion-Corrosion Behavior of Ni201 Cladding Layer by Cold Metal Transfer, Surf. Coat. Technol., 2022, 443, 128595. https://doi.org/10.1016/j.surfcoat.2022.128595CrossRef

57.

W. Meng, Y. Lei, X. Wang, Q. Ma, Hu. Lei, Hu. Xie, and X. Yin, Interface Characteristics and Mechanical Properties of Wire-Arc Depositing Inconel 625 Superalloy on Ductile Cast Iron, Surf. Coat. Technol., 2022, 440, 128493. https://doi.org/10.1016/j.surfcoat.2022.128493CrossRef

58.

S. Gejendhiran, A. Karpagaraj, D.V. Kumar, R. Dhanusuraman, and N. Annamalai, Experimental Investigations on Inconel 718 Hard-Faced Layer Deposited Over SS304 Using Cold Metal Transfer, Surf. Coat. Technol., 2023, 468, 129739. https://doi.org/10.1016/j.surfcoat.2023.129739CrossRef

59.

H. Zhang, S. Hu, Z. Wang, and Y. Liang, The Effect of Welding Speed on Microstructures of Cold Metal Transfer Deposited AZ31 Magnesium Alloy Clad, Mater. Des., 2015, 86, p 894–901. https://doi.org/10.1016/j.matdes.2015.07.143CrossRef

60.

C. Baoqiang, Q. Ruijie, Q. Bojin, and D. Jialuo, Influence of Cold Metal Transfer Process and its Heat Input on Weld Bead Geometry and Porosity of Aluminum-Copper Alloy Welds, Rare Metal. Mater. Eng., 2016, 45(3), p 606–611. https://doi.org/10.1016/S1875-5372(16)30080-7CrossRef

61.

J. Ning, Z.S. Yu, K. Sun, M.J. Hu, L.X. Zhang, Y.B. Zhang, and L.J. Zhang, Comparison of Microstructures and Properties of X80 Pipeline Steel Additively Manufactured Based on Laser Welding with Filler Wire and Cold Metal Transfer, J. Mater. Res. Technol., 2021, 10, p 752–768. https://doi.org/10.1016/j.jmrt.2020.12.021CrossRef

62.

Y. Liang, S. Hu, J. Shen, H. Zhang, and P. Wang, Geometrical and Microstructural Characteristics of the TIG-CMT Hybrid Welding in 6061 Aluminum Alloy Cladding, J. Mater. Process. Technol., 2017, 239, p 18–30. https://doi.org/10.1016/j.jmatprotec.2016.08.005CrossRef

63.

A. Benoit, S. Jobez, P. Paillard, V. Klosek, and T. Baudin, Study of Inconel 718 Weldability Using MIG CMT Process, Sci. Technol. Weld. Join., 2011, 16, p 477–482. https://doi.org/10.1179/1362171811Y.0000000031CrossRef

64.

M.R. Gornikowska, S. Dymek, M. Blicharski, Ł Cieniek, and J. Kusinski, Microstructure of 309 and 310 Austenitic Stainless Steel CMT Overlays on the 16Mo3 Pressure Vessel Steel, Arch. Metall. Mater., 2021, 66, p 645–649. https://doi.org/10.24425/amm.2021.135902CrossRef

65.

M.R. Górnikowska, J. Kusiński, G. Cempura, and J. Morgiel, Microstructure and Phase Composition of Transition Zone Between Low Alloyed Steel Boiler Tube and an Austenitic Stainless-Steel Weld Overlay Produced by Cold Metal Transfer Method, Int. J. Press. Vessels Pip., 2023, 203, 104951. https://doi.org/10.1016/j.ijpvp.2023.104951CrossRef

66.

M. Ahsan, Y.R. Kim, C.H. Kim, J.W. Kim, R. Ashiri, and Y.D. Park, Porosity Formation Mechanisms in Cold Metal Transfer (CMT) Gas Metal Arc Welding (GMAW) of Zinc Coated Steels, Sci. Technol. Weld. Join., 2016, 21, p 209–215. https://doi.org/10.1179/1362171815Y.0000000084CrossRef

67.

M. Ahsan, Y.R. Kim, R. Ashiri, Y.J. Cho, C. Jeong, and Y.D. Park, Cold Metal Transfer (CMT) GMAW of Zinc Coated Steel, Weld. J., 2016, 95, p 120–132.

68.

T. Zhu, Z.W. Chen, and W. Gao, Incipient Melting in Partially Melted Zone During Arc Welding of AZ91D Magnesium Alloy, Mater. Sci. Eng. A, 2006, 416, p 246–252. https://doi.org/10.1016/j.msea.2005.10.032CrossRef

69.

J. Liao, N. Yamamoto, and K. Nakata, Gas Tungsten Arc Welding of Fine-Grained AZ31B Magnesium alloys Made by Powder Metallurgy, Mater. Des., 2014, 56, p 460–467. https://doi.org/10.1016/j.matdes.2013.11.061CrossRef

70.

L. Liu, D. Ren, and F. Liu, A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys, Materials (Basel), 2014, 7(5), p 3735–3757. https://doi.org/10.3390/ma7053735CrossRefPubMed

71.

O.H. Madsen, New technologies for waste to energy plants 4th international symposium on Waste Treatment Technologies, Symp. A Q. J. Mod. Foreign Lit, 2003, p 1−12.

72.

M.D. Nguyen, J.W. Bang, A.S. Bin, S.R. Kim, Y. Kim, K.H. Hwang, V.H. Pham, and W.T. Kwon, Novel Polymer-Derived Ceramic Environmental Barrier coating System for Carbon Steel in Oxidizing Environments, J. Eur. Ceram. Soc., 2017, 37, p 2001–2010. https://doi.org/10.1016/j.jeurceramsoc.2016.12.049CrossRef

73.

S. Monika, P. Paweł, and R. Agnieszka, The Microstructure of Weld Overlay Ni-Base Alloy Deposited on Carbon Steel by CMT Method, SSP., 2015 https://doi.org/10.4028/www.scientific.net/ssp.231.119CrossRef

74.

S. Monika, K. Mateusz, K. Jan, K. Aga, and R. Agnieszka, Erosive Wear of Inconel 625 Alloy Coatings Deposited by CMT Method, Arch. Metall. Mater., 2016 https://doi.org/10.1515/amm-2016-0199CrossRef

75.

S. Monika, Investigation of Ni-Base Coatings After Corrosion Test, Inżynieria Materiałowa, 2016 https://doi.org/10.15199/28.2016.4.7CrossRef

76.

S. Monika, K. Aga, P. Paweł, and R. Agnieszka, Microstructure, Chemical and Phase Composition of Clad Layers of Inconel 625 and Inconel 686, Arch. Metall. Mater., 2018 https://doi.org/10.24425/118969CrossRef

77.

M.R. Gornikowska, M. Blicharski, and J. Kusinski, Influence of Weld Overlaying Methods on Microstructure and Chemical Composition of Inconel 625 Boiler Pipe Coatings, Kov. Mater., 2014, 52, p 146–147. https://doi.org/10.4149/km_20143_141CrossRef

78.

M.R. G’ornikowska, L. Cieniek, M. Blicharski, and J. Kusinski, Microstructure and Microsegregation of an Inconel 625 Weld Overlay Produced on Steel Pipes by the Cld Metal Transfer Technique, Arch. Metall. Mater., 2014, 59, p 1081–1084. https://doi.org/10.2478/amm-2014-0185CrossRef

79.

M.R. Gornikowska and M. Blicharski, TEM Microstructure and Chemical Composition of Transition Zone Between Steel Tube and an Inconel 625 weld Overlay Coating Produced by CMT Method, Arch. Metall. Mater., 2017, 62, p 787–793. https://doi.org/10.1515/amm-2017-0117CrossRef

80.

M.R. Gornikowska, M. Blicharski, J. Kusinski, L. Kusinski, and M. Marszycki, Influence of Boiler Pipe Cladding Techniques on Their Microstructure and Properties, Arch. Metall. Mater., 2013, 58, p 1093–1096. https://doi.org/10.2478/AMM-2913-0131CrossRef

81.

M.R. Gornikowska and M. Blicharski, Microsegregation and Precipites in Inconel 625 Arc Weld Overlay Coatings on Boiler Pipes, Arch. Metall. Mater., 2015, 60, p 2599–2605. https://doi.org/10.1515/amm-2015-0420CrossRef

82.

P. Pawel, M. Blicharski, S. Dymek, and M. Solecka, Electron Microscopy Investigation of Inconel 625 Weld Overlay on Boiler Steel, Solid State Phenom., 2015, 231, p 113–118. https://doi.org/10.4028/www.scientific.net/ssp.231.113CrossRef

83.

P. Paweł, K. Kazimierz, and M. Blicharski, Analysis of Phase Transformations in Inconel 625 Alloy during Annealing, Acta Phys. Pol., A, 2016, 130, p 1041–1044. https://doi.org/10.12693/APhysPolA.130.1041CrossRef

84.

K.R. Mishra, H. Kumar, G. Harmain, and S. Albert, Wear Performance of Ni-Cr-B-Si Hardface Coatings Fabricated by Cold Metal Transfer Welding, Proc. Inst. Mech. Eng. Part C., 2022, 236(3), p 1850–1860. https://doi.org/10.1177/09544062211023085CrossRef

85.

T. Zhao, S. Zhang, Z.Y. Wang, C.H. Zhang, D.X. Zhang, N.W. Wang, and C.L. Wu, Cavitation Erosion/Corrosion Synergy and Wear Behaviors of Nickel-Based Alloy Coatings on 304 Stainless Steel Prepared by Cold Metal Transfer, Wear, 2022, 510–511, 204510. https://doi.org/10.1016/j.wear.2022.204510CrossRef

86.

T. Zhao, S. Zhang, C.H. Zhang, X.Y. Sun, X.L. Bai, and C.L. Wu, The Effect of Ni201 Transition Layer on the Corrosion, Wear and Synergetic Cavitation Erosion-Corrosion Behavior of CMT-Monel K500 Coating, Surf. Coat. Technol., 2023, 463, 129507. https://doi.org/10.1016/j.surfcoat.2023.129507CrossRef

87.

L. Dong, Z. Shi, Y. Zhang, S. Wang, Q. Wang, and L. Liu, Microstructure and Sulfide Stress Corrosion Cracking of the Inconel 625/X80 Weld Overlay Fabricated by Cold Metal Transfer Process, Int. J. Hydrog. Energy, 2022, 47, p 29113–29130. https://doi.org/10.1016/j.ijhydene.2022.06.210CrossRef

88.

S. Wu, J. Feng, F. Cheng, Z. Wang, and D. Wang, Research on Root Appearance and Fatigue Life of Steel Catenary Riser (SCR) Using GMAW/GTAW-P Double-Sided Root Welding Process, Int. J. Press. Vessels Pip., 2023, 201, 104866. https://doi.org/10.1016/j.ijpvp.2022.104866CrossRef

89.

G. Toguyeni, N. Pepe, G. Barritte, J. Banse, T. Schmidt, R. Jones,, and J. Mair, High Strength Carbon Steel and CRA Lined Pipe for Reel-lay Installation, 2013, Offshore Technology Conference. https://doi.org/10.4043/24053-MS

90.

Y. Zhou and Q. Lin, Wetting of Galvanized Steel by Al 4043 Alloys in the First Cycle of CMT Process, J. Alloys Compd., 2014, 589, p 307–313. https://doi.org/10.1016/j.jallcom.2013.11.177CrossRef

91.

R. Cao, J.H. Sun, J.H. Chen, and P. Wang, Cold Metal Transfer Joining of Aluminum AA6061-T6-to-Galvanized Boron Steel, ASME, J. Manuf. Sci. Eng., 2014, 136(5), p 051015. https://doi.org/10.1115/1.4028012CrossRef

92.

R. Cao, C.H. Sun, J.H. Chen, and P. Wang, Weldability of CMT Joining of AA6061-T6 to Boron Steels with Various Coatings, Weld. J., 2014, 93, p 193–204.

93.

B. Das, B.N. Panda, and U.S. Dixit, Corrosion Behavior and its Effect on Mechanical Properties of ER70S-6 Cladding on AA 6061–T6 Alloy Using a Cold Metal Transfer Process, Low Cost Manufacturing Technologies. NERC. S.N. Joshi, U.S. Dixit, R.K. Mittal, S. Bag Ed., Springer, Singapore, 2022

94.

J. Tapiola, J. Tuominen, J. Vihinen et al., Sliding Wear Behavior of Cold Metal Transfer Cladded Stellite 12 Hardfacings on Martensitic Stainless Steel, Weld World, 2023, 67, p 573–584. https://doi.org/10.1007/s40194-022-01390-6CrossRef

95.

S. Prakash, R. John Felix Kumar, and S. Jerome, Effect of Heat Treatment on Microstructure and Mechanical Properties of CMT Welded Aluminium Alloy 2024, Mater. Today: Proc., 2018, 5(13), p 26997–27003. https://doi.org/10.1016/j.matpr.2018CrossRef

96.

R. Ahmad and M.A. Bakar, Effect of a Post-Weld Heat Treatment on the Mechanical and Microstructure Properties of AA6061 Joints Welded by the Gas Metal Arc Welding Cold Metal Transfer Method, Mater. Des., 2011, 32(10), p 5120–5126. https://doi.org/10.1016/j.matdes.2011CrossRef

97.

S. Yang, J. Zhang, J. Lin, and Y. Lei, Welding of Aluminum Alloy to Zinc Coated Steel by Cold Metal Transfer, Mater. Des., 2013, 2013(49), p 602–612. https://doi.org/10.1016/j.matdes.2013CrossRef

98.

B. Das, B.N. Panda, and U.S. Dixit, Effects of Heat Treatment on the Mechanical Properties of Fe-Based ER70S-6 Cladding on Aluminum Substrate Using Cold Metal Transfer Process, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-07975-6CrossRef

99.

R.K. Mishra, H. Kumar, G. Harmain, and S.K. Albert, Comparative Wear Behaviour of Ni-Cr-B-Si Hardface Coatings Made by Cold Metal Transfer and Plasma Transfer Arc Welding Processes, Proc. Inst. Mech. Eng. Part L, 2023, 237(1), p 92–106. https://doi.org/10.1177/14644207221103517CrossRef

100.

W. Meng, Y. Lei, X. Wang, Q. Ma, X. Yin, and Y. Hong, Interface Characteristics and Properties of Nickel-Based Alloy Coatings on Cast Iron Fabricated by Plasma and Cold Metal Transfer Wire-Arc Deposition, Weld World, 2023 https://doi.org/10.1007/s40194-023-01547-xCrossRef

101.

Y. Han, S. Zhong, C. Peng, L. Tian, Y. Sun, L. Zhao, and L. Xu, Fatigue Behavior of X65 Pipeline Steel Welded Joints Prepared by CMT/GMAW Backing Process, Int. J. Fatigue, 2022, 164, 107156. https://doi.org/10.1016/j.ijfatigue.2022.107156CrossRef

102.

X. Ni, L. Zhang, W. Wu, D. Zhu, D. Kong, C. Dong, and G. Zhu, Functionally Nb Graded Inconel 718 Alloys Fabricated by Laser Melting Deposition: Mechanical Properties and Corrosion Behavior, Anti-Corros. Methods Mater., 2020, 67, p 16–23. https://doi.org/10.1108/acmm-06-2019-2131CrossRef

Title: Recent Developments in Cladding and Coating Using Cold Metal Transfer Technology
Authors: Bappa Das
Biranchi N. Panda
Faladrum Sharma
Uday S. Dixit
Publication date: 15-11-2023
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 7/2024
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-023-08940-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2024

Pure Copper Sheets Processed by Constrained Studded Pressing: The Effect of Die Angle

Evaluation of Wire Electrical Discharge Machining Performance Features on EN AW-6082 T6 Aluminum Alloy and Optimization of Machining Characteristics

Tensile and Low-Cycle Fatigue Behavior of Dissimilar Friction Welds of Alloy 718/Alloy 720Li

Temperature-Dependent Morphological Evaluation of In Situ Grown Hard ZrN Coating for Enhanced Mechanical, Wetting and Electrochemical Properties

Study on Fatigue Performance of Three-Roll Skew Rolling Hollow Axle

Theoretical Calculation and Analysis of Physical and Mechanical Properties of WC-Co Cemented Carbide with Lanthanum

Premium Partners