Top

Journal of Materials Engineering and Performance

Published in:

14-06-2021

Research on Hot Deformation Behavior of As-Forged TC17 Titanium Alloy

Authors: Jun Cai, Min Guo, Pai Peng, Peng Han, Xiaokang Yang, Ben Ding, Ke Qiao, Kuaishe Wang, Wen Wang

Published in: Journal of Materials Engineering and Performance | Issue 10/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The high-temperature deformation behavior of the as-forged TC17 titanium alloy was studied based on the results of thermal compression simulation tests. Additionally, the effects of strain rate, temperature and true strain on the flow stress were analyzed using orthogonal experimentation and variance analysis. The results indicated that all deformation parameters exerted significant influence on flow stress, with temperature and strain having the largest and least influence, respectively. Thereafter, a constitutive equation based on modified nonlinear regression was proposed. The error analysis results showed that the flow stress of the as-forged TC17 alloy could be predicted by the obtained constitutive equation. The effect of deformation parameters on the microstructure was investigated by EBSD and TEM.

previous article Investigations of Fatigue and Fracture Behavior of AA 7085

next article Corrosion of Electrodeposited Ni Coatings of Agricultural Machinery by Farming Fertilizers

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

J.J.G. Moreno, D.G. Papageorgiou, G.A. Evangelakis and C.E. Lekka, An Ab Initio Study of the Structural and Mechanical Alterations of Ti-Nb Alloys, J. Appl. Phys., 2018, 124, p 245102.CrossRef

R.V. Chernozem, M.A. Surmeneva, B. Krause, T. Baumbach, V.P. Ignatov, A.I. Tyurin, K. Loza, M. Epple and R.A. Surmenev, Hybrid Biocomposites Based on Titania Nanotubes and a Hydroxyapatite Coating Deposited by RF-Magnetron Sputtering: Surface Topography, Structure, And Mechanical Properties, Appl. Surf. Sci, 2017, 426, p 229–237.CrossRef

F. Khodabakhshi, B. Marzbanrad, H. Jahed and A.P. Gerlich, Interfacial Bonding Mechanisms Between Aluminum and Titanium During Cold Gas Spraying Followed by Friction-Stir Modification, Appl. Surf. Sci, 2018, 462, p 739–752.CrossRef

M.L. Dong, X.F. Cui, B.W. Lu, G. Jin, Z.B. Cai, X.R. Feng, Z. Liu and H.D. Wang, Effect of Ti Plus N and Zr Plus N Ions Implantation on Mechanical and Corrosion Performance of Carburized Layer, Thin Solid Films, 2019, 692, p 137597. https://doi.org/10.1016/j.tsf.2019.137597CrossRef

X. Ji, I. Gutierrez-Urrutia, S. Emura, T.W. Liu, T. Nara, X.H. Min, D.H. Ping and K. Tsuchiya, Twinning Behavior of Orthorhombic-Alpha" Martensite in a Ti-7.5Mo Alloy, Sci. Technol. Adv. Mat, 2019, 20, p 401–411.CrossRef

Y. Gu, K. Ying, D.S. Shen, L.J. Huang, X.B. Ying, H.Q. Huang, K. Cheng, J.Z. Chen, Y.Y. Zhou, T. Chen and H.J. Feng, Using Sewage Sludge Pyrolytic Gas to Modify Titanium Alloy to Obtain High-Performance Anodes in Bio-Electrochemical Systems, J. Power Sources, 2017, 372, p 38–45.CrossRef

L. Tan, C.F. Yao, D.H. Zhang, J.X. Ren, Z. Zhou, J.Y. Zhang, Evolution of Surface Integrity and Fatigue Properties After Milling, Polishing, and Shot Peening of TC17 Alloy Blades. Int. J. Fatigue 136, 105630 (2020). https://doi.org/10.1016/j.ijfatigue.2020.105630

Z.W. Cao, H.Y. Xu, S.K. Zou and Z.G. Che, Investigation of Surface Integrity on TC17 Titanium Alloy Treated by Square-spot Laser Shock Peening, Chin. J. Aeronaut, 2012, 25, p 650–656.CrossRef

P.K. Zhao, L. Fu and D.C. Zhong, Numerical Simulation Of Transient Temperature and Axial Deformation During Linear Friction Welding Between TC11 and TC17 Titanium Alloys, Comp. Mater. Sci, 2014, 92, p 325–333.CrossRef

10.

F. Tian, W.D. Zeng, X. Ma, K.X. Wang, Y.T. Shao and Y.G. Zhou, Quantitative Analysis of the Orientation of Lamellar alpha in TC17 Titanium Alloy, Rare Metal Mat. Eng, 2012, 41, p 998–1003.

11.

E.I. Galindo-Nava and P.E.J. Rivera-Diaz-del-Castillo, Modelling Plastic Deformation in BCC Metals: Dynamic Recovery and Cell Formation Effects, Mat. Sci. Eng. a-Struct, 2012, 558, p 641–648.CrossRef

12.

D.S. Gianola, D. Farkas, M. Gamarra and M.R. He, The Role of Confinement on Stress-Driven Grain Boundary Motion in Nanocrystalline Aluminum Thin Films, J. Appl. Phys, 2012, 112, p 12.CrossRef

13.

M.-H. Jang, J.-Y. Kang, J.H. Jang, T.-H. Lee and C. Lee, Hot Deformation Behavior and Microstructural Evolution of Alumina-Forming Austenitic Heat-Resistant Steels During Hot Compression, Mater. Charact., 2017, 123, p 207–217.CrossRef

14.

Q. Liu, Z. Wang, H. Yang and Y. Ning, Hot Deformation Behavior and Processing Maps of Ti-6554 Alloy for Aviation Key Structural Parts, Metals, 2020, 10, p 828.CrossRef

15.

B. Ke, L. Ye, J. Tang, Y. Zhang, S. Liu, H. Lin, Y. Dong and X. Liu, Hot Deformation Behavior and 3D Processing Maps of AA7020 Aluminum Alloy, J. Alloys Compd., 2020, 845, p 156113.CrossRef

16.

P. Liu, R. Zhang, Y. Yuan, C. Cui, Y. Zhou and X. Sun, Hot Deformation Behavior and Workability of a Ni–Co Based Superalloy, J. Alloys Compd., 2020, 831, p 154618.CrossRef

17.

M. Jia, Y. Alshammari, F. Yang and L. Bolzoni, Effect of Heat Treatment on the Microstructure and Mechanical Properties of Blended Elemental Ti–6Al–4V Produced by Powder Forging, Mater. Sci. Eng, 2020, 791, p 139724.CrossRef

18.

X. Ma, W. Zeng, Y. Sun, K. Wang, Y. Lai and Y. Zhou, Modeling Constitutive Relationship of Ti17 Titanium Alloy with Lamellar Starting Microstructure, Mater. Sci. Eng. A, 2012, 538, p 182–189.CrossRef

19.

I. Weiss and S.L. Semiatin, Thermomechanical Processing of Beta Titanium Alloys —An Overview, Mater. Sci. Eng. A, 1998, 243, p 46–65.CrossRef

20.

J. Luo, L. Li and M.Q. Li, The Flow Behavior and Processing Maps During the Isothermal Compression of Ti17 alloy, Mater. Sci. Eng. A, 2014, 606, p 165–174.CrossRef

21.

L. Li and M.Q. Li, Evolution Characterization of α Lamellae During Isothermal Compression of TC17 Alloy with Colony-α Microstructure, Mater. Sci. Eng. A, 2018, 712, p 637–644.CrossRef

22.

J.K. Fan, J.S. Li, Y.D. Zhang, H.C. Kou, L. Germain, N. Siredey-Schwaller and C. Esling, Microstructure and Crystallography of α Phase Nucleated Dynamically During Thermo-Mechanical Treatments in Metastable β Titanium Alloy, Adv. Eng. Mater, 2017, 19, p 1600859.CrossRef

Title: Research on Hot Deformation Behavior of As-Forged TC17 Titanium Alloy
Authors: Jun Cai
Min Guo
Pai Peng
Peng Han
Xiaokang Yang
Ben Ding
Ke Qiao
Kuaishe Wang
Wen Wang
Publication date: 14-06-2021
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 10/2021
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-05942-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2021

Microstructure, Tensile Properties, and Wear Resistance of In Situ TiB2/6061 Composites Prepared by High Energy Ball Milling and Stir Casting

Effect of Tool Rotational Speed on the Microstructure and Associated Mechanical Properties of Incrementally Formed Commercially Pure Titanium

Shear Localization Influences on Assessment of Deformation Behaviors of Pure Iron in Impact Loading Process

Effect of Travel Speed on the Properties of Al-Mg Aluminum Alloy Fabricated by Wire Arc Additive Manufacturing

Characterization of Microstructure and Microtexture in a Cold-Rolled and Intercritically Annealed Dual-Phase Steel

Effects of Short-Time Heat Treatment on Microstructure and Mechanical Properties of 7075 Friction Stir Welded Joint

Premium Partners