Top

The International Journal of Advanced Manufacturing Technology

Published in:

23-02-2024 | Critical Review

Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review

Authors: Jun Yao, Xun Li, Baorui Du, Ning Zhang, Ruijie Gou

Published in: The International Journal of Advanced Manufacturing Technology | Issue 7-8/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Machined surface integrity is a comprehensive description of surface quality, which mainly includes the key indexes, such as surface micro-morphology, surface hardening, surface residual stress, and surface microstructure. It has a direct influence on the fatigue performance of specimens. Therefore, a lot of researches have been carried out in-depth, and many results are achieved. Based on the formation mechanism of surface integrity indexes, main achievements of influence mechanism of surface integrity on fatigue behavior of metal specimens are presented and analyzed, and the internal relationship and application range of the mechanisms are clarified. It is further presented that the extremely important factor of surface integrity affecting fatigue performance of specimens is the micro-plastic strain of machined surface, and the contents that need to be further improved in the basic theory of anti-fatigue machining are analyzed. Meanwhile, it is pointed out that establishing a comprehensive model of the influence of surface integrity on fatigue performance based on surface micro-morphology and surface plastic deformation is a focus point, which provides a reference for the further researchers and promotes the application of anti-fatigue machining technology.

previous article A review on machining Ti–5Al–5V–5Mo–3Cr alloy using defined geometry tools

next article Correction to: Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Field M, Kahles JF (1964) The surface integrity of machined-and ground high-strength steels. DMIC Report 210:54–77

Field M, Kahles JF, Cammett JNT (1972) Review of measuring methods for surface integrity. CIRP 21(2):219–238

Feldmann G, Wong CC, Wei W, Haubold T (2014) Application of vibropeening on aero–engine component. Proc CIRP 13:423–428CrossRef

Davies DP, Jenkins SL, Legg SJ (2014) The effect machining processes can have on the fatigue life and surface integrity of critical helicopter components. Proc CIRP 13:25–30CrossRef

Zou S, Wu J, Zhang Y, Gong S, Sun G, Ni Z, Cao Z, Che Z, Feng A (2018) Surface integrity and fatigue lives of Ti17 compressor blades subjected to laser shock peening with square spots. Surf Coat Technol 347:398–406CrossRef

Zhang YK, Lu JZ, Ren XD, Yao HB, Yao HX (2009) Effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engine blades manufactured by LY2 aluminum alloy. Mater Des 30(5):1697–1703CrossRef

Prevey PS, Jayaraman N, Ravindranath RA, Shepard M (2010) Mitigation of fretting fatigue damage in blade and disk pressure faces with low plasticity burnishing. Journal of Engineering for Gas Turbines and Power 132(8):082105CrossRef

Ding X, Huang D, Yan X, Fan J, Qi M, Liu Z (2021) Effect of pneumatic shot peening on the high and low cycle combined fatigue life of K403 turbine blades. Fatigue Fract Eng Mater Struct 44(6):1439–1454CrossRef

Abdulstaar M, Mhaede M, Wollmann M, Wagner L (2014) Investigating the effects of bulk and surface severe plastic deformation on the fatigue, corrosion behaviour and corrosion fatigue of AA5083. Surf Coat Technol 254:244–251CrossRef

10.

Wang DK (2023) Research on surface integrity and its influencing factors in the high-speed cutting of typical aluminum/titanium/nickel alloys: a review. Int J Adv Manuf Technol 127(9–10):4915–4942CrossRef

11.

Holmberg J, Wretland A, Hammersberg P, Berglund J, Suarez A, Beno T (2021) Surface integrity investigations for prediction of fatigue properties after machining of alloy 718. Int J Fatigue 144:106059CrossRef

12.

Zhu X, Liu P, Zhang C, Liang H, Hua J (2023) Study on surface integrity and fatigue properties of TC4 titanium alloy by surface ultrasonic rolling. Materials 16(2):485CrossRef

13.

Sun J, Guo YB (2009) A comprehensive experimental study on surface integrity by end milling Ti-6Al-4V. J Mater Process Technol 209(8):4036–4042CrossRef

14.

Li W, Guo YB, Barkey ME (2011) Tool wear influence on surface integrity and fatigue life of hard milled surfaces [C] //ASME/STLE 2011 International Joint Tribology Conference. American Society of Mechanical Engineers

15.

Hughes JI, Sharman ARC, Ridgway K (2006) The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity. Proc Inst Mech Eng Part B: J Eng Manuf 220(2):93–107CrossRef

16.

Li W, Guo YB, Barkey ME, Jordon JB (2014) Effect tool wear during end milling on the surface integrity and fatigue life of Inconel 718. Proc CIRP 14:546–551CrossRef

17.

Ulutan D, Ozel T (2011) Machining induced surface integrity in titanium and nickel alloys: a review. Int J Mach Tools Manuf 51(3):250–280CrossRef

18.

Jawahir IS, Brinksmeier E, M’Saoubi R, Aspinwall DK, Outeiro JC, Meyer D, Umbrello D, Jayal AD (2011) Surface integrity in material removal processes: recent advances. CIRP Ann Manuf Technol 60(2):603–626CrossRef

19.

Song Y, Yin M, Lei P, Huang S, Yin G, Du Y (2022) Predicting the fatigue life of machined specimen based on its surface integrity parameters. Int J Adv Manuf Technol 119(11–12):8159–8171CrossRef

20.

Ma S, Li X, Su S (2017) Influence of electroplated wheel wear on GH4169 grinding surface integrity. Aviation Manuf Technol 60(1–2):74–78

21.

Wang Z, Wang H, Li X (2020) Surface integrity of powder metallurgy superalloy FGH96 affected by grinding with electroplated CBN wheel. Proc CIRP 87:204–209CrossRef

22.

Wang H, Li X, Wang Z, Xu R (2020) Influence of electroplated CBN wheel wear on grinding surface morphology of powder metallurgy superalloy FGH96. Materials 13(4):1005–1018CrossRef

23.

Hashimoto F, Guo YB, Warren AW (2006) Surface integrity difference between hard turned and ground surfaces and its impact on fatigue life. CIRP Ann 55(1):81–84CrossRef

24.

Zhang H, Zhao W, Guo Z, Gou R, Li X (2023) Effects of turned and milled surface plastic deformation on fatigue properties of TC4 specimens. Surf Technol 52(2):35–42

25.

Tan L, Yao C, Ren J, Zhang D (2017) Effect of cutter path orientations on cutting forces, tool wear, and surface integrity when ball end milling TC17. Int J Adv Manuf Technol 88(9–12):2589–2602CrossRef

26.

Li X, Wang Y, Xu R, Yang S, Guan C, Zhou Y (2019) Influence of surface integrity on fatigue behavior of Inconel 718 and Ti6Al4V workpieces with CBN electroplated wheel. Int J Adv Manuf Technol 102(5–8):2345–2356CrossRef

27.

Klocke F, Welling D, Klink A, Perez R (2014) Quality assessment through in-process monitoring of wire-EDM for fir tree slot production. Proc CIRP 24:97–102CrossRef

28.

Dai F, Zhou J, Lu J, Luo X (2016) A technique to decrease surface roughness in overlapping laser shock peening. Appl Surf Sci 370:501–507CrossRef

29.

Maharjan N, Lin Z, Ardi DT, Ji L, Hong M (2020) Laser peening of 420 martensitic stainless steel using ultrashort laser pulses. Proc CIRP 87:279–284CrossRef

30.

Pacella M (2020) Laser finishing of polycrystalline diamond as strengthening mechanism. Proc CIRP 87:240–244CrossRef

31.

Trung PQ, Khun NW, Butler DL (2018) Effect of shot peening process on the fatigue life of shot peened low alloy steel. J Eng Mater Technol 140(1):011013CrossRef

32.

Priyadarsini C, Ramana VSNV, Prabha KA, Swetha S (2019) A review on ball, roller, low plasticity burnishing process. Mater Today: Proc 18:5087–5099

33.

Jayaraman N, Prevey PS, Ravindranath R (2005) Improved damage tolerance of Ti-6Al-4V aero engine blades and vanes using residual compression by design. Final report. Cincinnati: Lambda Research Inc

34.

Prevey PS, Jayaraman N, Ravindranath R, (2010) Fatigue life extension of steam turbine alloys using low plasticity burnishing (LPB). ASME Turbo Expo. Power for Land, Sea, and Air. Glasgow, UK, pp 2277–2287

35.

Gao YK (2011) Improvement of fatigue property in 7050–T7451 aluminum alloy by laser peening and shot peening. Mater Sci Eng, A 528(10–11):3823–3828CrossRef

36.

Molaiekiya F, Aliakbari Khoei A, Aramesh M, Veldhuis S (2021) Machined surface integrity of Inconel 718 in high-speed dry milling using SiAlON ceramic tools. Int J Adv Manuf Technol 112(7–8):1941–1950CrossRef

37.

Xu R, Zhou Y, Li X, Yang S, Han K, Wang S (2019) The effect of milling cooling conditions on the surface integrity and fatigue behavior of the GH4169 superalloy. Metals 9(11):1179–1188CrossRef

38.

Paulo Davim J (2010) Surface integrity in machining [M]. Springer, LondonCrossRef

39.

Li X, Wang Z, Yang S, Guo Z, Zhou Y, Han K (2021) Influence of turning tool wear on the surface integrity and anti-fatigue behavior of Ti1023. Adv Mech Eng 13(4):16878140211011278

40.

Li X, Yang S, Lu Z, Zhang D, Zhang X, Jiang X (2020) Influence of ultrasonic peening cutting on surface integrity and fatigue behavior of Ti-6Al-4V specimens. J Mater Process Technol 275:116386–116394CrossRef

41.

Xu X, Liu D, Zhang X, Zhang X, Liu C, Liu D, Zhang W (2019) Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy. Int J Fatigue 125:237–248CrossRef

42.

Zhang HX (2008) Research on grinding mechanism and processing parameter of aeroalloy [D]. Beihang University

43.

Du J, Liu ZQ (2012) Research on the white layer formation in hard machining of powder metallurgy superalloy FGH95. Rare Metal Mater Eng 41(2):698–702

44.

Liu Z, Lv S (2014) Thermo-mechanical coupling mechanisms of white layer formation on machined surface of powder metallurgical nickel-based superalloy. J Mech Eng 50(17):186–193CrossRef

45.

Schwach DW, Guo YB (2006) A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue. Int J Fatigue 28(12):1838–1844CrossRef

46.

Ramesh A, Melkote S, Allard L, Riester L, Watkins T (2005) Analysis of white layers formed in hard turning of AISI 52100 steel. Mater Sci Eng: A 390(1–2):88–97CrossRef

47.

Li X, Qin B, Wang Z, Zhang Y, Yu J (2021) Grinding of fir tree slots of powder metallurgy superalloy FGH96 using profiled electroplated CBN wheel. Int J Adv Manuf Technol 115(1–2):311–317CrossRef

48.

Suárez A, Veiga F, Polvorosa R, Artaza T, Holmberg J, Lopez de Lacalle L, Wretland A (2019) Surface integrity and fatigue of non-conventional machined Alloy 718. J Manuf Process 48:44–50CrossRef

49.

Galatolo R, Fanteria D (2017) Influence of turning parameters on the high-temperature fatigue performance of Inconel 718 superalloy. Fatigue Fract Eng Mater Struct 40(12):2019–2031CrossRef

50.

Maiya PS, Busch DE (1975) Effect of surface roughness on low-cycle fatigue behavior of type 304 stainless steel. Metall and Mater Trans A 6(9):1761–1766CrossRef

51.

Xiao W, Chen H, Yin Y (2014) Experimental study of surface roughness effect on low cycle fatigue life of Glidcop and Q345. J Exp Mech 29(4):417–425

52.

Zhu L, Deng C, Wang D (2016) Effect of surface roughness on very high cycle fatigue behavior of Ti-6Al-4V alloy. Acta Mech Sinica 52(5):583–591

53.

Chen HT, Liu ZB, Wang XB, Wang Y, Liu SY (2022) Effect of surface integrity on fatigue life of 2024 aluminum alloy subjected to turning. J Manuf Process 83:650–666CrossRef

54.

Suraratchai M, Limido J, Mabru C, Chieragatti R (2008) Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy. Int J Fatigue 30(12):2119–2126CrossRef

55.

Yang M, Ren J (1996) The effects of grinding surface integrity on fatigue life of superalloy GH4169. Aviation Precision Manuf Technol 32(6):28–31

56.

Ren J, Huang Q, Zhang Z, Kang R (1991) The influence of machined surface integrity on fatigue life of nickel-base superalloy GH33A. Aeronautical Manuf Technol 5:2–5

57.

Wu DX, Zhang DH, Yao CF (2017) Effect of surface integrity of turned GH4169 superalloy on fatigue performance. J Aeronautical Mater 37(6):59–67

58.

Arola D, Williams CL (2002) Estimating the fatigue stress concentration factor of machined surfaces. Int J Fatigue 24(9):923–930CrossRef

59.

Wu DX, Zhang DH, Yao CF (2018) Effect of turning and surface polishing treatments on surface integrity and fatigue performance of nickel-based alloy GH4169. Metals 8(7):549CrossRef

60.

Ås SK, Skallerud B, Tveiten BW (2008) Surface roughness characterization for fatigue life predictions using finite element analysis. Int J Fatigue 30(12):2200–2209CrossRef

61.

Yao C, Wu D, Jin Q, Huang X, Ren J, Zhang D (2013) Influence of high-speed milling parameter on 3D surface topography and fatigue behavior of TB6 titanium alloy. Trans Nonferrous Metals Soc China 23(3):650–660CrossRef

62.

Yang D (2017) Milling induced surface integrity and its influence on fatigue life of the titanium alloy Ti-6Al-4V [D]. Shandong University

63.

Zhang G (2010) Effect of roughness on surface stress concentration factor and fatigue life. J Mech Strength 32(1):110–115

64.

Wang X, Huang C, Zou B, Liu G, Zhu H, Wang J (2018) Experimental study of surface integrity and fatigue life in the face milling of Inconel 718. Front Mech Eng 13(2):1–8CrossRef

65.

Taraov LP, Hyler WS, Letner HR (1958) Effects of grinding direction and of abrasive tumbling on the fatigue limit of hardened steel. Proceedings of American Society for Testing Materials 57:601–622

66.

Itoga H, Tokaji K, Nakajima M, Ko HN (2003) Effect of surface roughness on step-wise S-N characteristics in high strength steel. Int J Fatigue 25(5):379–385CrossRef

67.

Novovic D, Dewes RC, Aspinwall DK, Voice W, Bowen P (2004) The effect of machined topography and integrity on fatigue life. Int J Mach Tools Manuf 44(2–3):125–134CrossRef

68.

Denkena B, Böß V, Nespor D, Samp A (2011) Kinematic and stochastic surface topography of machined TiAl6V4-parts by means of ball nose end milling. Proc Eng 19:81–87CrossRef

69.

Xu R, Zhou Y, Yang S, Li X, Wang H (2019) Research status of influence mechanism of surface integrity on fatigue behavior of workpieces. Aeronautical Manuf Technol 62(14):96–102

70.

Li X, Guan C, Zhao P (2018) Influences of milling and grinding on machined surface roughness and fatigue behavior of GH4169 superalloy workpieces. Chin J Aeronaut 31(6):1399–1405CrossRef

71.

Nishida SI, Zhou C, Hattori N, Wang S (2007) Fatigue strength improvement of notched structural steels with work hardening. Mater Sci Eng A 468(45):176–183CrossRef

72.

Josefson BL, Stigh U, Hjelm HE (1995) A nonlinear kinematic hardening model for elastoplastic deformations in grey cast iron. J Eng Mater Technol 117(2):145–150CrossRef

73.

Xie L, Palmer D, Otto F, Wang Z, Jane Wang Q (2015) Effect of surface hardening technique and case depth on rolling contact fatigue behavior of alloy steels. Tribol Trans 58(2):215–224CrossRef

74.

Lee KS, Song JH (2006) Estimation methods for strain-life fatigue properties from hardness. Int J Fatigue 28(4):386–400CrossRef

75.

Suárez A, Veiga F, de Lacalle LN, L, Polvorosa R, Lutze S, Wretland A, (2016) Effects of ultrasonics-assisted face milling on surface integrity and fatigue life of Ni-alloy 718. J Mater Eng Perform 25(11):5076–5086CrossRef

76.

Li X, Zhao P, Niu Y, Guan C (2017) Influence of finish milling parameters on machined surface integrity and fatigue behavior of Ti1023 workpiece. Int J Adv Manuf Technol 91(1–4):1297–1307CrossRef

77.

Liu Y, Pang S, Wang X, Xie L (2013) Experimental study on effect of surface integrity on high-strength steel fatigue life. Acta Armamentarii 34(6):759–764

78.

Henriksen EK (1951) Residual stresses in machined surfaces. Trans Am Soc Mech Eng 73(1):69–76CrossRef

79.

Choi Y (2017) Influence of rake angel on surface integrity and fatigue performance of machined surfaces. Int J Fatigue 94:81–88CrossRef

80.

Suresh S (1998) Fatigue of materials [M]. Cambridge University PressCrossRef

81.

Javidi A, Rieger U, Eichlseder W (2008) The effect of machining on the surface integrity and fatigue life. Int J Fatigue 30(10):2050–2055CrossRef

82.

Sasahara H (2005) The effect on fatigue life of residual stress and surface hardness resulting from different cutting conditions of 0.45% C steel. Int J Mach Tools Manuf 45(2):131–136CrossRef

83.

Pramanik A, Dixit AR, Chattopadhyaya S, Uddin MS, Dong Y, Basak AK, Littlefair G (2017) Fatigue life of machined components. Adv Manuf 5(1):59–76CrossRef

84.

Kawagoishi N, Chen Q, Kondo E, Goto M, Nisitani H (1999) Influence of cubic boron nitride grinding on the fatigue strengths of carbon steels and a nickel-base superalloy. J Mater Eng Perform 8(2):152–158CrossRef

85.

Souto-Lebel A, Guillemot N, Lartigue C, Billardon R (2011) Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life. Proc Eng 19(1):343–348CrossRef

86.

Zhang X, Zhang Y, Lu J, Xuan F, Wang Z, Tu S (2010) Improvement of fatigue life of Ti–6Al–4V alloy by laser shock peening. Mater Sci Eng: A 527(15):3411–3415CrossRef

87.

Chin KS, Idapalapati S, Ardi DT (2019) Fatigue of surface-treated nickel-based superalloy at high temperature. J Mater Eng Perform 28(12):7181–7187CrossRef

88.

Yang D, Liu Z (2018) Surface integrity generated with peripheral milling and the effect on low-cycle fatigue performance of aeronautic titanium alloy Ti-6Al-4V. The Aeronautical Journal 122(1248):316–332CrossRef

89.

Prevéy PS (2000) The effect of cold work on the thermal stability of residual compression in surface enhanced IN718. 20th Annual Conference on Heat Treating, ST LOUIS, MO, pp 426-434

90.

James MR (1982) The relaxation of residual stresses during fatigue[M]. Springer, US, Boston, MACrossRef

91.

McCLUNG RC (2007) A literature survey on the stability and significance of residual stresses during fatigue. Fatigue Fract Eng Mater Struct 30(3):173–205CrossRef

92.

Buchanan DJ, Ashbaugh NE, John R (2006) Thermal residual stress relaxation in powder metal IN100 superalloy. J ASTM Int 3(5):JAI12552CrossRef

93.

Nalla RK, Altenberger I, Noster U, Liu G, Scholtes B, Ritchie RO (2003) On the influence of mechanical surface treatments - deep rolling and laser shock peening - on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures. Mater Sci Eng: A 355(1–2):216–230CrossRef

94.

Wick A, Schulze V, Vöhringer O (2000) Effects of warm peening on fatigue life and relaxation behaviour of residual stresses in AISI 4140 steel. Mater Sci Eng: A 293(1–2):191–197CrossRef

95.

Ross AS, Morrow JD (1960) Cycle-dependent stress relaxation of A-286 alloy. J Fluids Eng 82(3):654–658

96.

Holzapfel H, Schulze V, Vöhringer O, Macherauch E (1998) Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures. Mater Sci Eng: A 248(1–2):9–18CrossRef

97.

Kim JC, Cheong SK, Noguchi H (2013) Residual stress relaxation and low- and high-cycle fatigue behavior of shot-peened medium-carbon steel. Int J Fatigue 56:114–122CrossRef

98.

Zhuang WZ, Halford GR (2001) Investigation of residual stress relaxation under cyclic load. Int J Fatigue 23(Supplement 1):31–37CrossRef

99.

Ren N, Yang HM, Yuan S, Wang Y, Tang S, Zheng L, Ren X, Dai F (2014) High temperature mechanical properties and surface fatigue behavior improving of steel alloy via laser shock peening. Mater Des 53:452–456CrossRef

100.

Torres MAS, Voorwald HJC (2002) An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel. Int J Fatigue 24(8):877–886CrossRef

101.

Roland T, Retraint D, Lu K, Lu J (2006) Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment. Scripta Mater 54(11):1949–1954CrossRef

102.

Zhao X, Xue G, Liu Y (2017) Gradient crystalline structure induced by ultrasonic impacting and rolling and its effect on fatigue behavior of TC11 titanium alloy. Results Phys 7:1845–1851CrossRef

103.

Tian J, Villegas J, Yuan W, Fielden D, Shaw L, Liaw P, Klarstrom D (2007) A study of the effect of nanostructured surface layers on the fatigue behaviors of a C-2000 superalloy. Mater Sci Eng: A 468:164–170CrossRef

104.

Zeng Z, Li X, Xu D, Lu L, Gao H, Zhu T (2016) Gradient plasticity in gradient nano-grained metals. Extreme Mech Lett 8:213–219CrossRef

105.

Lundberg M, Saarimäki J, Moverare JJ, Calmunger M (2017) Surface integrity and fatigue behaviour of electric discharged machined and milled austenitic stainless steel. Mater Charact 124:215–222CrossRef

106.

Yasuoka M, Wang P, Zhang K, Qiu Z, Kusaka K, Pyoun Y, Murakami R (2013) Improvement of the fatigue strength of SUS304 austenite stainless steel using ultrasonic nanocrystal surface modification. Surf Coat Technol 218:93–98CrossRef

107.

Villegas JC, Shaw LL, Dai K, Yuan W, Tian J, Liaw PK, Klarstrom DL (2005) Enhanced fatigue resistance of a nickel-based hastelloy induced by a surface nanocrystallization and hardening process. Philos Mag Lett 85(8):427–438CrossRef

108.

Shaw LL, Tian J, Ortiz AL, Dai K, Villegas JC, Liaw PK, Ren R, Klarstrorn DL (2010) A direct comparison in the fatigue resistance enhanced by surface severe plastic deformation and shot peening in a C-2000 superalloy. Mater Sci Eng: A 527(4):986–994CrossRef

109.

Dai K, Shaw LL (2008) Analysis of fatigue resistance improvements via surface severe plastic deformation. Int J Fatigue 30(8):1398–1408CrossRef

110.

Zhou L, Long C, He W, Tian L, Jia W (2018) Improvement of high-temperature fatigue performance in the nickel-based alloy by LSP-induced surface nanocrystallization. J Alloy Compd 744:156–164CrossRef

111.

Zhao X, Zhou H, Liu Y (2018) Effect of shot peening on the fatigue properties of nickel-based superalloy GH4169 at high temperature. Results Phys 11:452–460CrossRef

112.

Deng H, Zheng W, Song Z, Cen Q, Feng H (2015) Effect of cold deformation on microstructure and mechanical behavior of 0Cr25Ni35AlTi. J Iron Steel Res 27(6):67–72

113.

Li X, Guo Z, Yang S, Zhang H, Wang Z (2022) Study on the effect of milling surface plastic deformation on fatigue performance of 20Cr and TC17 specimens. Metals 12(5):736CrossRef

114.

Ren J, Huang Q (1993) The influence of machined surface roughness on fatigue life of high temperature alloy GH33A. Aeronautical Manuf Technol 5:2–7

115.

Klotz T, Delbergue D, Bocher P, Lévesque M (2018) Surface characteristics and fatigue behavior of shot peened Inconel 718. Int J Fatigue 110:10–21CrossRef

116.

Ohnistova P, Piska M, Petrenec M, Dluhos J, Hornikova J, Sandera P (2019) Fatigue life of 7475–T7351 aluminum after local severe plastic deformation caused by machining. Materials 12(21):3605CrossRef

117.

Wang X, Hu Y, Fu S, Tang Z, Song Y, Zhao Z (2018) Effect of shot peening intensity on surface integrity and high- temperature fatigue performance of TC17 and GH4169 alloys. Heat Treat Met 43(1):67–71

Title: Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review
Authors: Jun Yao
Xun Li
Baorui Du
Ning Zhang
Ruijie Gou
Publication date: 23-02-2024
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 7-8/2024
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-024-13195-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7-8/2024

Numerical analysis EF of resilience impact test behavior for X80 steel

Improvement of ultrasonic cavitation and pumping effect in microhole EDM

Effect of magnesium addition consolidated by the thixoforming process on the wear properties of A319 alloy

Performance of additively manufactured composite mold with uniform fiber orientation

Correction to: Closed-loop quality control system for laser chemical machining in metal micro-production

Study on coarse grain refinement of Ti-6554 billet in hot extrusion process

Premium Partners