nach oben

Journal of Materials Engineering and Performance

Erschienen in:

27.09.2016

Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718

verfasst von: Alfredo Suárez, Fernando Veiga, Luis N. López de Lacalle, Roberto Polvorosa, Steffen Lutze, Anders Wretland

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This work investigates the effects of ultrasonic vibration-assisted milling on important aspects such us material surface integrity, tool wear, cutting forces and fatigue resistance. As an alternative to natural application of ultrasonic milling in brittle materials, in this study, ultrasonics have been applied to a difficult-to-cut material, Alloy 718, very common in high-temperature applications. Results show alterations in the sub-superficial part of the material which could influence fatigue resistance of the material, as it has been observed in a fatigue test campaign of specimens obtained with the application of ultrasonic milling in comparison with another batch obtained applying conventional milling. Tool wear pattern was found to be very similar for both milling technologies, concluding the study with the analysis of cutting forces, exhibiting certain improvement in case of the application of ultrasonic milling with a more stable evolution.

Vorheriger Artikel Influence of Grain Refinement on Microstructure and Mechanical Properties of Tungsten Carbide/Zirconia Nanocomposites

Nächster Artikel Microstructure, Hardness and Impact Toughness of Heat-Treated Nanodispersed Surface and Friction Stir-Processed Aluminum Alloy AA7075

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

D. Dudzinski, A. Devillez, A. Moufki, D. Larrouwuère, V. Zerrouki, and J. Vigneau, A Review of Developments Towards Dry and High Speed Machining of Alloy 718 Alloy, Int. J. Mach. Tools Manuf., 2004, 44(4), p 439–456. doi:10.1016/S0890-6955(03)00159-7 CrossRef

I.A. Choudhury and M.A. El-Baradie, Machinability of Nickel-Base Super Alloys: A General Review, J. Mater. Process. Technol., 1998, 77(1–3), p 278–284. doi:10.1016/S0924-0136(97)00429-9 CrossRef

N. Corduan, T. Himbert, G. Poulachon, M. Dessoly, M. Lambertin, J. Vigneau, and B. Payoux, Wear Mechanisms of New Tool Materials for Ti-6Al-4V High Performance Machining, CIRP Ann. Manuf. Technol., 2003, 52(1), p 73–76. doi:10.1016/S0007-8506(07)60534-4 CrossRef

F. Klocke, H. Sangermann, A. Krämer, and D. Lung, Influence of a High-Pressure Lubricoolant Supply on Thermo-Mechanical Tool Load and Tool Wear Behaviour in the Turning of Aerospace Materials, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2011, 225(2), p 52–61. doi:10.1177/09544054JEM2082

S. Olovsjö, A. Wretland, and G. Sjöberg, The Effect of Grain Size and Hardness of Wrought Alloy 718 on the Wear of Cemented Carbide Tools, Wear, 2010, 268(9–10), p 1045–1052. doi:10.1016/j.wear.2010.01.017 CrossRef

A. Alberdi, A. Rivero, L.N.L. de Lacalle, I. Etxeberria, and A. Suárez, Effect of Process Parameter on the Kerf Geometry in Abrasive Water Jet Milling, Int. J. Adv. Manuf. Technol., 2010, 51(5–8), p 467–480. doi:10.1007/s00170-010-2662-y CrossRef

A. Alberdi, A. Rivero, and L.N. López de Lacalle, Experimental Study of the Slot Overlapping and Tool Path Variation Effect in Abrasive Waterjet Milling, J. Manuf. Sci. Eng., 2011, doi:10.1115/1.4004320

V. García Navas, I. Arriola, O. Gonzalo, and J. Leunda, Mechanisms Involved in the Improvement of Inconel 718 Machinability by Laser Assisted Machining (LAM), Int. J. Mach. Tools Manuf., 2013, 74, p 19–28. doi:10.1016/j.ijmachtools.2013.06.009 CrossRef

A. Celaya, L.N. López de Lacalle, F.J. Campa, and A. Lamikiz, Ultrasonic Assisted Turning of Mild Steels, Int. J. Mater. Prod. Technol., 2010, 37(1–2), p 60–70. doi:10.1504/IJMPT.2010.029459 CrossRef

10.

A. Maurotto and C.T. Wickramarachchi, Experimental Investigations on Effects of Frequency in Ultrasonically-Assisted End-Milling of AISI, 316L: A Feasibility Study, Ultrasonics, 2016, 65, p 113–120. doi:10.1016/j.ultras.2015.10.012 CrossRef

11.

V.K. Astashev and V.I. Babitsky, Ultrasonic Processes and Machines, Springer, Berlin, 2007, doi:10.1007/978-3-540-72061-4

12.

V.I. Babitsky, A.V. Mitrofanov, and V.V. Silberschmidt, Ultrasonically Assisted Turning of Aviation Materials: Simulations and Experimental Study, Ultrasonics, 2004, 42(1–9), p 81–86. doi:10.1016/j.ultras.2004.02.001 CrossRef

13.

N. Ahmed, A.V. Mitrofanov, V.I. Babitsky, and V.V. Silberschmidt, Analysis of Material Response to Ultrasonic Vibration Loading in Turning Inconel 718, Mater. Sci. Eng. A, 2006, 424(1–2), p 318–325. doi:10.1016/j.msea.2006.03.025 CrossRef

14.

Agostino Maurotto, Riaz Muhammad, Anish Roy, and Vadim V. Silberschmidt, Enhanced Ultrasonically Assisted Turning of a β-Titanium Alloy, Ultrasonics, 2013, 53(7), p 1242–1250. doi:10.1016/j.ultras.2013.03.006 CrossRef

15.

V.V. Silberschmidt, S.M.A. Mahdy, M.A. Gouda, A. Naseer, A. Maurotto, and A. Roy, Surface-Roughness Improvement in Ultrasonically Assisted Turning, Procedia CIRP, 2014, 13, p 49–54. doi:10.1016/j.procir.2014.04.009 CrossRef

16.

J. Pujana, A. Rivero, A. Celaya, and L.N. López de Lacalle, Analysis of Ultrasonic-Assisted Drilling of Ti6Al4V, Int. J. Mach. Tools Manuf., 2009, 49(6), p 500–508. doi:10.1016/j.ijmachtools.2008.12.014 CrossRef

17.

I. Hsu and C. Tsao, Study on the Effect of Frequency Tracing in Ultrasonic-Assisted Drilling of Titanium Alloy, Int. J. Adv. Manuf. Technol., 2009, 43(1), p 127–135. doi:10.1007/s00170-008-1696-x CrossRef

18.

N.J. Churi, Z.J. Pei, and C. Treadwell, Rotary Ultrasonic Machining of Titanium Alloy: Effects of Machining Variables, Mach. Sci. Technol., 2006, 10(3), p 301–321. doi:10.1080/10910340600902124 CrossRef

19.

V. Ostasevicius, R. Gaidys, R. Dauksevicius, and S. Mikuckyte, Study of Vibration Milling for Improving Surface Finish of Difficult-to-Cut Materials, J. Mech. Eng., 2013, 59(6), p 351–357. doi:10.5545/sv-jme.2012.856 CrossRef

20.

J. Grazeviciute, I. Skiedraite, V. Jurenas, A. Bubulis, and V. Ostasevicius, Applications of High Frequency Vibrations for Surface-Milling, Mechanika, 2008, 1, p 46–49

21.

S. Seguy, G. Dessein, and L. Arnaud, Surface Roughness Variation of Thin Wall Milling, Related to Modal Interactions, Int. J. Mach. Tools Manuf., 2008, 48(3–4), p 261–274. doi:10.1016/j.ijmachtools.2007.09.005 CrossRef

22.

Patent: DE 10 2013 210 199 A1. Sauer Ultrasonic GmbH

23.

C.M. Kuo, Y.T. Yang, H.Y. Bor, C.N. Wei, and C.C. Tai, Aging Effects on the Microstructure and Creep Behavior of Inconel 718 Superalloy, Mater. Sci. Eng. A, 2009, 510–511, p 289–294. doi:10.1016/j.msea.2008.04.097 CrossRef

24.

R. Avilés, J. Albizuri, A. Rodríguez, and L.N. López de Lacalle, Influence of Low-Plasticity Ball Burnishing on the High-Cycle Fatigue Strength of Medium Carbon AISI, 1045 Steel, Int. J. Fatigue, 2013, 55, p 230–244. doi:10.1016/j.ijfatigue.2013.06.024 CrossRef

Titel: Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718
verfasst von: Alfredo Suárez
Fernando Veiga
Luis N. López de Lacalle
Roberto Polvorosa
Steffen Lutze
Anders Wretland
Publikationsdatum: 27.09.2016
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2343-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2016

Weld Bead Distortion of Thin-Plate Using Weak Digital Image Correlation Method

Microstructural Influence on Mechanical Properties in Plasma Microwelding of Ti6Al4V Alloy

The Dynamic Tensile Behavior of Railway Wheel Steel at High Strain Rates

Hot Deformation Behavior and Microstructural Evolution of a Medium Carbon Vanadium Microalloyed Steel

Mechanism for Corrosion Prevention by a Mechanical Plating of Uniform Zinc-Iron Alloy

Ni-Flash-Coated Galvannealed Steel Sheet with Improved Properties

Premium Partner

Marktübersichten