Top

Mechanics of Composite Materials

Published in:

07-07-2016

Rheological and Mechanical Properties of Silica-Based Bagasse-Fiber-Ash-Reinforced Recycled HDPE Composites

Authors: W. Sitticharoen, A. Chainawakul, T. Sangkas, Y. Kuntham

Published in: Mechanics of Composite Materials | Issue 3/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The rheological and mechanical properties of a recycled high-density polyethylene biocomposite with silicabased bagasse fiber ash as a reinforcing filler were investigated. The bagasse fiber ash (BFA) was surface-treated using a silane coupling agent (vinyltrimethoxysilane). Composites with BFA whose particle size was varied in the range of 3 to 25wt.% (37, 53, and 105mm), were prepared and examined.

previous article Stress-Strain State of Thick-Walled Filament-Wound Cylinders at the Macro-, Meso-, and Microscales During Cooling

next article Boris Efimovich Pobedrya (1937-2016) - Editorial Board

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

L. J. Da Silva, T. H. Panzera, V. R. Velloso, and A. L. Christoforo, “Hybrid polymeric composites reinforced with sisal fibres and silica microparticles,” Compos. Part B, 43, No.8, 3436-3444 (2012).

T. P. Sathishkumar, P. Navaneethakrishnan, and S. Shankar, “Tensile and flexural properties of snake grass natural fiber reinforced isophthallic polyester composites,” Compos. Sci. Technol., 72, No.10, 1183-1190 (2012).

D. R. Mulinari, H. J. C. Voorwald, M. O. H. Cioffi, M. L. C. P. Da Silva, and S. M. Luz, “Preparation and properties of HDPE/Sugarcane bagasse cellulose composites obtained for thermokinetic mixer,” Carbohydrate Polym., 75, No.2, 317-321 (2009).

F. Yao, Q. Wu, Y. Lei, and Xu Y, “Rice straw fiber-reinforced high-density polyethylene composite: Effect of fiber type and loading,” Ind. Crop. Prod. 28, No. 1, 63-72 (2008).

Office of cane and sugar board. Report on total cane crushing and sugar production 2012/2013, Thailand: Ministry of Industry (2013).

G. Sua-iam and N. Makul, “Use of increasing amounts of bagasse ash waste to produce self-compacting concrete by adding limestone powder waste,” J. Clean Prod., 57, 308-319 (2013).CrossRef

H.Y. Kordkheili, S. Hiziroglu, and M. Farsi, “Some of the physical and mechanical properties of cement composites manufactured from carbon nanotubes and bagasse fiber,” Mater. Des., 33, 395-398 (2012).CrossRef

D. R. Mulinari, H. J. C. Voorwald, M. O. H. Cioffi, M. L. C. P. Da Silva, T. G. Da Cruz, and C. Saron, “Sugarcane bagasse cellulose/HDPE composites obtained by extrusion,” Compos. Sci. Technol., 69, No.2, 214-219 (2009).

J. O. Agunsoye and V.S. Aigbodion, “Bagasse-filled recycled polyethylene biocomposites: Morphological and mechanical properties study,” Results in Phys., 3, 187-194 (2013).CrossRef

10.

V. S. Aigbodion, S. B. Hassan, and J.O. Agunsoye, “Effect of bagasse ash reinforcement on the dry sliding wear behavior of polymer,” Mater. Des., 33, 322-327 (2012).CrossRef

11.

S. Kanking, P. Niltui, E. Wimolmala, and N. Sombatsompop, “Use of bagasse fiber ash as a secondary filler in silica- or carbon black-filled natural rubber,” Mater. Des., 41, 74-78 (2012).CrossRef

12.

S. A. Hashemi, H. Arabi, and N. Mirzaeyan, “Surface modification of bagasse fibers by silane coupling agents through microwave oven and its effects on the physical, mechanical, and rheological properties of PP bagasse fiber composites,” Polym. Compos., 28, No. 6, 713–721 (2007).

13.

A. Moubarik, “Rheology study of sugar cane bagasse lignin-added phenol–formaldehyde adhesives,” J. Adhesion., 91, No. 5, 347-355 (2015).CrossRef

14.

R. Dangtungee and P. Supaphol, “Melt rheology and extrudate swell of sodium chloride-filled low-density polyethylene: Effects of content and size of salt particles,” Polym. Test., 29, No. 2, 188-195 (2010).CrossRef

15.

N. Muksing, M. Nithitanakul and B. P. Grady, and R. Magaraphan, “Melt rheology and extrusion swell of organobentonite-filled polypropylene nanocomposites,” Polym. Test., 27, No. 4, 470-479 (2008).

16.

J. Z. Liang, “Melt rheology of nanometre-calcium-carbonate-filled acrylonitrile-butadiene-styrene (ABS) copolymer composites during capillary extrusion,” Polym. Int., 51, 1473-1478 (2002).CrossRef

17.

W. Sitticharoen, N-T. Intawong, and N. Sombatsompop, “An experimental apparatus for measurement of elongational flow properties for LDPE melt and the effect of testing conditions,” Polym. Polym. Compos., 18, No. 7, 359-368 (2010).

18.

S. M. Tamboli, S.T. Mhaske and D. D. Kale, “Crosslinked polyethylene,” India. Chem. Technol., 11, 853-864 (2004).

19.

W. Harnnarongchai, N-T. Intawong, and N. Sombatsompop, “Effects of roller speed, temperature, volumetric flow rate and multiple extrusions on mechanical strength of molten and solidified LDPE under tensile deformation,” J. Macro. Sci. Part B. Phys, 50, No. 6, 1074-1086 (2011).CrossRef

20.

M. Abdelmouleh, S. Boufi, M. N. Belgacem and A. Dufresne, “Short natural-fibre-reinforced polyethylene and natural rubber composites: Effect of silane coupling agents and fibre loading,” Compos. Sci. Technol., 67, 1627-1639 (2007).CrossRef

21.

T. Chaowasakoo and N. Sombatsompop, “Mechanical and morphological properties of fly ash/epoxy composites using conventional thermal and microwave curing methods,” Compos. Sci. Technol., 67, No. 11-12, 2282-2291 (2007).

22.

J.Douce, J. P. Boilot, J. Biteau, L. Scodellaro, and A. Jimenez, “Effect of filler size and surface condition of nano-sized silica particles in polysiloxane coatings,” Thin Solid Films, 466, 114-122 (2004).

23.

E. Reynaud, T. Jouen, C. Gauthier, G. Vigier, and J. Varlet, “Nanofillers in a polymeric matrix: a study on silica-reinforced PA6,” Polymer, 42, 8759-8768 (2001).CrossRef

Title: Rheological and Mechanical Properties of Silica-Based Bagasse-Fiber-Ash-Reinforced Recycled HDPE Composites
Authors: W. Sitticharoen
A. Chainawakul
T. Sangkas
Y. Kuntham
Publication date: 07-07-2016
Publisher: Springer US
Published in: Mechanics of Composite Materials / Issue 3/2016
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-016-9594-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2016

Simulation of Experimental Parameters of RC Beams by Employing the Polynomial Regression Method

Experimental Investigation of the Capacity of Steel Fibers to Ensure the Structural Integrity of Reinforced Concrete Specimens Coated with CFRP Sheets

Prestressing Effects on the Performance of Concrete Beams with Near-surface-mounted Carbon-fiber-reinforced Polymer Bars

Variant of the Continuum Model of Effective Elastic Moduli of Transversely Isotropic Porous Materials

Determination of the Mode I Interlaminar Fracture Toughness by Using a Nonlinear Double-Cantilever Beam Specimen

Fixed Points of Vitrification Equations

Premium Partners