Top

Experimental Mechanics

Published in:

02-12-2015

Shear Characterization of Adhesive Layers by Advanced Optical Techniques

Authors: A. C. C. Leitão, R. D. S. G. Campilho, D. C. Moura

Published in: Experimental Mechanics | Issue 3/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

With adhesive bonding, design can be oriented towards lighter structures because of the direct weight savings over fastened or welded joints and also due to the flexibility to joint different materials. Cohesive Zone Models (CZM) are a powerful design tool, although the CZM laws of the adhesive bond in tension and shear are required as input in the models. This work experimentally evaluates the shear fracture toughness (G _IIC) and CZM laws of bonded joints for three adhesives with distinct ductility. G _IIC was characterized by conventional and the J-integral techniques. Additionally, by the J-integral technique, the precise shape of the cohesive law was defined. For the J-integral, a digital image correlation method is used to estimate the adhesive layer shear displacement at the crack tip (δ _s) during the test, coupled to a Matlab® sub-routine for extraction of this parameter automatically. As output of this work, fracture data is provided in shear for each adhesive, showing the marked differences between the three adhesives evaluated. This information enables the subsequent strength prediction of bonded joints under this mode of loading.

previous article On the Accuracy of Elastic Strain Field Measurements by Laue Microdiffraction and High-Resolution EBSD: a Cross-Validation Experiment

next article Three-Dimensional Phase Evaluation in ESPI by Using a Non-Cube Beam-Splitter

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

da Silva LFM, Öchsner A, Adams RD (eds) (2011) Handbook of adhesion technology. Springer, Heidelberg

Klarbring A (1991) Derivation of a model of adhesively bonded joints by the asymptotic expansion method. Int J Eng Sci 29:493–512. doi:10.1016/0020-7225(91)90090-P CrossRefMathSciNetMATH

Campilho RDSG, Banea MD, Neto JABP, da Silva LFM (2013) Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer. Int J Adhes Adhes 44:48–56. doi:10.1016/j.ijadhadh.2013.02.006 CrossRef

Andersson T, Stigh U (2004) The stress–elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forces. Int J Solids Struct 41:413–434. doi:10.1016/j.ijsolstr.2003.09.039 CrossRef

Adams R, Comyn J, Wake W (1997) Structural adhesive joints in engineering, 2nd edn. Chapman and Hall, Abingdon

Ripling E, Mostovoy S, Patrick R (1964) Application of fracture mechanics to adhesive joints. ASTM STP 360:5–19

Zhu Y, Liechti KM, Ravi-Chandar K (2009) Direct extraction of rate-dependent traction-separation laws for polyurea/steel interfaces. Int J Solids Struct 46:31–51. doi:10.1016/j.ijsolstr.2008.08.019 CrossRef

Dugdale DS (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8:100–104. doi:10.1016/0022-5096(60)90013-2 CrossRef

Barenblatt GI (1962) The mathematical theory of equilibrium cracks in brittle fracture. Adv Appl Mech 7:55–129. doi:10.1016/s0065-2156(08)70121-2 CrossRefMathSciNet

10.

Tvergaard V, Hutchinson JW (1993) The influence of plasticity on mixed-mode interface toughness. J Mech Phys Solids 41:1119–1135. doi:10.1016/0022-5096(93)90057-M CrossRefMATH

11.

de Moura MFSF, Gonçalves JPM, Chousal JAG, Campilho RDSG (2008) Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints. Int J Adhes Adhes 28:419–426. doi:10.1016/j.ijadhadh.2008.04.004 CrossRef

12.

Campilho RDSG, Banea MD, Neto JABP, da Silva LFM (2012) Modelling of single-lap joints using cohesive zone models: effect of the cohesive parameters on the output of the simulations. J Adhes 88:513–533. doi:10.1080/00218464.2012.660834 CrossRef

13.

Lee MJ, Cho TM, Kim WS, Lee BC, Lee JJ (2010) Determination of cohesive parameters for a mixed-mode cohesive zone model. Int J Adhes Adhes 30:322–328. doi:10.1016/j.ijadhadh.2009.10.005 CrossRef

14.

de Moura MFSF, Campilho RDSG, Gonçalves JPM (2008) Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading. Compos Sci Technol 68:2224–2230. doi:10.1016/j.compscitech.2008.04.003 CrossRef

15.

de Moura MFSF, Campilho RDSG, Gonçalves JPM (2009) Pure mode II fracture characterization of composite bonded joints. Int J Solids Struct 46:1589–1595. doi:10.1016/j.ijsolstr.2008.12.001 CrossRefMATH

16.

Campilho RDSG, de Moura MFSF, Pinto AMG, Morais JJL, Domingues JJMS (2009) Modelling the tensile fracture behaviour of CFRP scarf repairs. Compos Part B 40:149–157. doi:10.1016/j.compositesb.2008.10.008 CrossRef

17.

Flinn BD, Lo CS, Zok FW, Evans AG (1993) Fracture-resistance characteristics of a metal-toughened ceramic. J Am Ceram Soc 76:369–375. doi:10.1111/j.1151-2916.1993.tb03794.x CrossRef

18.

Mello AV, Liechti KM (2006) The effect of self-assembled monolayers on interfacial fracture. J Appl Mech 73:860–870. doi:10.1115/1.1940662 CrossRefMATH

19.

Pandya KC, Williams JG (2000) Measurement of cohesive zone parameters in tough polyethylene. Polym Eng Sci 40:1765–1776. doi:10.1002/pen.11308 CrossRef

20.

Campilho RDSG, Moura DC, Gonçalves DJS, da Silva JFMG, Banea MD, da Silva LFM (2013) Fracture toughness determination of adhesive and co-cured joints in natural fibre composites. Compos Part B 50:120–126. doi:10.1016/j.compositesb.2013.01.025 CrossRef

21.

Leffler K, Alfredsson KS, Stigh U (2007) Shear behaviour of adhesive layers. Int J Solids Struct 44:530–545. doi:10.1016/j.ijsolstr.2006.04.036 CrossRefMATH

22.

Ouyang Z, Li G (2009) Nonlinear interface shear fracture of end notched flexure specimens. Int J Solids Struct 46:2659–2668. doi:10.1016/j.ijsolstr.2009.02.011 CrossRefMATH

23.

Ji G, Ouyang Z, Li G (2011) Effects of bondline thickness on Mode-II interfacial laws of bonded laminated composite plate. Int J Fract 168:197–207. doi:10.1007/s10704-010-9571-9 CrossRef

24.

Ji G, Ouyang Z, Li G (2012) Local interface shear fracture of bonded steel joints with various bondline thicknesses. Exp Mech 52:481–491. doi:10.1007/s11340-011-9507-y CrossRef

25.

Carlberger T, Stigh U (2010) Influence of layer thickness on cohesive properties of an epoxy-based adhesive—an experimental study. J Adhes 86:816–835. doi:10.1080/00218464.2010.498718 CrossRef

26.

Marzi S, Biel A, Stigh U (2011) On experimental methods to investigate the effect of layer thickness on the fracture behavior of adhesively bonded joints. Int J Adhes Adhes 31:840–850. doi:10.1016/j.ijadhadh.2011.08.004 CrossRef

27.

Stigh U, Alfredsson K, Biel A (2009) Measurement of cohesive laws and related problems. In: Proceedings of the ASME Int Mech Eng Congress and Exposition

28.

Campilho RDSG, Banea MD, Pinto AMG, da Silva LFM, de Jesus AMP (2011) Strength prediction of single- and double-lap joints by standard and extended finite element modelling. Int J Adhes Adhes 31:363–372. doi:10.1016/j.ijadhadh.2010.09.008 CrossRef

29.

Faneco TMS (2014) Caraterização das propriedades mecânicas de um adesivo estrutural de alta ductilidade, MSc Thesis, Instituto Superior de Engenharia do Porto, Portugal

30.

Compston P, Jar PYB, Burchill PJ, Takahashi K (2001) The effect of matrix toughness and loading rate on the mode-II interlaminar fracture toughness of glass-fibre/vinyl-ester composites. Compos Sci Technol 61:321–333. doi:10.1016/S0266-3538(00)00226-8 CrossRef

31.

Elmarakbi A (ed) (2014) Advanced composite materials for automotive applications: Structural integrity and crashworthiness. Wiley, Hoboken

32.

Wang Y, Williams JG (1992) Corrections for mode II fracture toughness specimens of composite materials. Compos Sci Technol 43:251–256. doi:10.1016/0266-3538(92)90096-L CrossRef

33.

Rice JR (1968) A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 35:379–386. doi:10.1115/1.3601206 CrossRef

34.

Ameli A, Papini M, Schroeder JA, Spelt JK (2010) Fracture R-curve characterization of toughened epoxy adhesives. Eng Fract Mech 77:521–534. doi:10.1016/j.engfracmech.2009.10.009 CrossRef

35.

Ji G, Ouyang Z, Li G, Ibekwe S, Pang SS (2010) Effects of adhesive thickness on global and local mode-I interfacial fracture of bonded joints. Int J Solids Struct 47:2445–2458. doi:10.1016/j.ijsolstr.2010.05.006 CrossRefMATH

36.

Campilho RDSG, Moura DC, Banea MD, da Silva LFM (2014) Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method. Int J Adhes Adhes 53:15–22. doi:10.1016/j.ijadhadh.2014.01.015 CrossRef

37.

Pelfrene J, Van Dam S, Paepegem V (2015) Numerical analysis of the peel test for characterisation of interfacial debonding in laminated glass. Int J Adhes Adhes 62:146–153. doi:10.1016/j.ijadhadh.2015.07.010 CrossRef

38.

Desai CK, Basu S, Parameswaran V (2015) Determination of traction separation law for interfacial failure in adhesive joints at different loading rates. J Adhes. doi:10.1080/00218464.2015.1046986 MATH

39.

Constante CJ, Campilho RDSG, Moura DC (2015) Tensile fracture characterization of adhesive joints by standard and optical techniques. Eng Fract Mech 136:292–304. doi:10.1016/j.engfracmech.2015.02.010 CrossRef

Title: Shear Characterization of Adhesive Layers by Advanced Optical Techniques
Authors: A. C. C. Leitão
R. D. S. G. Campilho
D. C. Moura
Publication date: 02-12-2015
Publisher: Springer US
Published in: Experimental Mechanics / Issue 3/2016
Print ISSN: 0014-4851
Electronic ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-015-0111-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2016

Determination of Stress Intensity Factor KIII for Three-Dimensional Crack by Using Caustic Method in Combination with Stress-Freezing and Stress-Releasing Technique

Drop Tower Adaptation for Medium Strain Rate Tensile Testing

Influence of Lateral Displacement of the Grip on Single lap Composite-to-Aluminum Bolted Joints

On the Accuracy of Elastic Strain Field Measurements by Laue Microdiffraction and High-Resolution EBSD: a Cross-Validation Experiment

The Role of Surface Structure in Normal Contact Stiffness

A Novel Testing Method for Uniaxial Compression of Thin-Sheet Magnesium Alloys

Premium Partners