Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Materials Science: Materials in Electronics
Published in: Journal of Materials Science: Materials in Electronics 10/2013

01-10-2013

Sintering, densification and crystallization of Ca–Al–B–Si–O glass/Al2O3 composites for LTCC application

Authors: Ming Liu, Hongqing Zhou, Xiaoying Xu, Zhenxing Yue, Min Liu, Haikui Zhu

Published in: Journal of Materials Science: Materials in Electronics | Issue 10/2013

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Ca–Al–B–Si–O glass/Al2O3 composites were prepared based on the borosilicate glass powders (D50 = 2.84) and Al2O3 ceramic powders (D50 = 3.26), and the sintering, densification, crystallization of samples were investigated. The shrinkage of sample starts to have a sharp increase at 600 °C. The shrinkage of sample starts to have a further rapid increase after the glass softening temperature of about 713 °C. Glass/Al2O3 composites can be sintered at 875 °C/15 min and exhibit better properties of a relative density of 98.4 %, a λ value of 2.89 W/mK, a ε r value of 7.82 and a tan δ value of 5.3 × 10−4. The interface between glass and Al2O3 grains and the interface between anorthite and glass phase depicts a good compatibility according to transmission electron microcopy test. It is the low sintering temperature, high density and good compatibility with Ag electrodes that, guarantee borosilicate glass/Al2O3 composites suitable for low temperature co-fired ceramic materials.
previous article Enhancement of electrochemical properties on TiO2/carbon nanofibers by electrospinning process
next article Undoped, nitrogen-doped and boron-doped multiwalled carbon nanotube/poly(vinyl alcohol) composite as active layer in simple hydrostatic pressure sensors

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
R.E. Mistler, E.R. Twiname, Tape Casting: Theory and Practice (American Ceramic Society, 2000)
2.
R.E. Mistler, Tape casting: past, present, potential. Am. Ceram. Soc. Bull. 77(10), 82–86 (1998)
3.
C. Bienert, A. Roosen, Characterization and improvement of LTCC composite materials for application at elevated temperatures. J. Eur. Ceram. Soc. 30(2), 369–374 (2010)CrossRef
4.
K. Schindler, A. Roosen, Manufacture of 3D structures by cold low pressure lamination of ceramic green tapes. J. Eur. Ceram. Soc. 29(5), 899–904 (2009)CrossRef
5.
M. Rauscher, A. Roosen, Influence of low-temperature co-fired ceramics green tape characteristics on shrinkage behavior. Int. J. Appl. Ceram. Technol. 4(5), 387–397 (2007)CrossRef
6.
K. Makarovič, A. Meden, M. Hrovat et al., The effect of processing conditions on the properties of LTCC material. J. Am. Ceram. Soc. 95(2), 760–767 (2012)CrossRef
7.
M. Sebastian, H. Jantunen, Low loss dielectric materials for LTCC applications: a review. Int. Mater. Rev. 53(2), 57–90 (2008)CrossRef
8.
A. Heunisch, A. Dellert, A. Roosen, Effect of powder, binder and process parameters on anisotropic shrinkage in tape cast ceramic products. J. Eur. Ceram. Soc. 30(16), 3397–3406 (2010)CrossRef
9.
A. Mohanram, S.-H. Lee, G.L. Messing et al., Constrained sintering of low-temperature co-fired ceramics. J. Am. Ceram. Soc. 89(6), 1923–1929 (2006)CrossRef
10.
S. Kemethmüller, M. Hagymasi, A. Stiegelschmitt et al., Viscous flow as the driving force for the densification of low-temperature co-fired ceramics. J. Am. Ceram. Soc. 90(1), 64–70 (2007)CrossRef
11.
M. Eberstein, T. Rabe, W.A. Schiller, Influences of the glass phase on densification, microstructure, and properties of low-temperature co-fired ceramics. Int. J. Appl. Ceram. Technol. 3(6), 428–436 (2006)CrossRef
12.
C.J.D. Kumar, T.K. Sowmya, E.K. Sunny et al., Influence of nature of filler on densification of anorthite-based crystallizable glass + ceramic system for low temperature cofired ceramics application. J. Am. Ceram. Soc. 92(3), 595–600 (2009)CrossRef
13.
Y.J. Seo, J.H. Jung, Y.S. Cho et al., Influences of particle size of alumina filler in an LTCC system. J. Am. Ceram. Soc. 90(2), 649–652 (2007)CrossRef
14.
R. Muller, R. Meszaros, B. Peplinski et al., Dissolution of alumina, sintering, and crystallization in glass ceramic composites for LTCC. J. Am. Ceram. Soc. 92(8), 1703–1708 (2009)CrossRef
15.
M. Liu, H. Zhou, H. Zhu et al., Microstructure and dielectric properties of glass/Al2O3 composites with various low softening point borosilicate glasses. J. Mater. Sci. Mater. Electron. 23(12), 2130–2139 (2012)CrossRef
16.
S. Rajesh, H. Jantunen, M. Letz et al., Low temperature sintering and dielectric properties of alumina-filled glass composites for LTCC applications. Int. J. Appl. Ceram. Technol. 9(1), 52–59 (2012)CrossRef
17.
Y.S. Cho, Y.H. Jo, H.R. Choi et al., Influences of alkali oxides on crystallization and dielectric properties of anorthite-based low temperature dielectrics. J. Ceram. Soc. Jpn. 116(1355), 825–828 (2008)CrossRef
18.
V. Marques, D. Tulyaganov, S. Agathopoulos et al., Low temperature synthesis of anorthite based glass-ceramics via sintering and crystallization of glass-powder compacts. J. Eur. Ceram. Soc. 26(13), 2503–2510 (2006)CrossRef
19.
W.D. Wolf, K.J. Vaidya, L.F. Francis, Mechanical properties and failure analysis of alumina-glass dental composites. J. Am. Ceram. Soc. 79(7), 1769–1776 (1996)CrossRef
20.
J.M. Tian, Y.L. Zhang, S.X. Zhang et al., Mechanical properties and microstructure of alumina-glass composites. J. Am. Ceram. Soc. 82(6), 1592–1594 (1999)CrossRef
21.
T. Sun, H. Xiao, W. Guo et al., Effect of Al2O3 content on BaO–Al2O3–B2O3–SiO2 glass sealant for solid oxide fuel cell. Ceram. Int. 36(2), 821–826 (2010)CrossRef
Metadata
Title
Sintering, densification and crystallization of Ca–Al–B–Si–O glass/Al2O3 composites for LTCC application
Authors
Ming Liu
Hongqing Zhou
Xiaoying Xu
Zhenxing Yue
Min Liu
Haikui Zhu
Publication date
01-10-2013
Publisher
Springer US
Published in
Journal of Materials Science: Materials in Electronics / Issue 10/2013
Print ISSN: 0957-4522
Electronic ISSN: 1573-482X
DOI
https://doi.org/10.1007/s10854-013-1351-7

Other articles of this Issue 10/2013

Journal of Materials Science: Materials in Electronics 10/2013 Go to the issue

OriginalPaper

Study of ultrafine grains formed on the microsized catalyst surface induced growth of aligned SiO2 nanowires

Original Research

Effect of sulfur and copper amounts in sol–gel precursor solution on the growth, crystal properties, and optical properties of Cu2ZnSnS4 films

OriginalPaper

Formation of Cu2SnS3 thin film by the heat treatment of electrodeposited SnS–Cu layers

OriginalPaper

Porous nano-structured VO2 films with different surfactants: synthesis mechanisms, characterization, and applications

OriginalPaper

Fabrication of a novel SnO2:Al/ZnO:F bi-layer for opto-electronic applications

OriginalPaper

Effect of sputtering power and annealing temperature on the properties of indium tin oxide thin films prepared from radio frequency sputtering using powder target