Top

Published in:

2019 | OriginalPaper | Chapter

3. Sintering: Most Efficient Technologies for Greenhouse Emissions Abatement

Author : Pasquale Cavaliere

Published in: Clean Ironmaking and Steelmaking Processes

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The sintering process is finalized to transform the small grained raw material into larger grained iron ore sinter of the right dimensions to be used in the blast furnace. Achieving an adequate sintered product depends on the adequate raw materials supply and the previous stage to the sintering process, granulation. The air emissions comprise of various pollutants such as dust, SO₂, NOx, CO, organochlorine compounds, heavy metals, etc. Atmospheric emissions also include volatile organic compounds (VOCs) formed from volatile material in the coke breeze, oily mill scale, etc. Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F), commonly known as dioxins and furans, are also formed. Emission limits of the sinter waste gas have been continually and strictly tightened in the last years, so new solutions are continually needed. Multiple methods should be collectively considered to ensure that the final emissions are below the limiting values. To face these issues, waste heat recovery systems are employed. Exhaust gases can be processed, adsorbed, decomposed, and/or collected as nontoxic by-products to increase the quantity and improve the quality of steam recovery, reaching high fuel savings. Among all the technologies, the largely used methods are denitrification equipment, desulfurization equipment, and activated coke packed bed adsorption. EOS takes advantage of the fact that only a part of the oxygen in the air is consumed for coke combustion. Optimized exhaust recirculation in the sinter bed allows for the improvement of energy efficiency and emissions control. Charcoal and biomass utilization find optimal results in the emissions abatement. Optimization of raw material quality and processing conditions contribute to the overall efficiency of the process.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Coke Making: Most Efficient Technologies for Greenhouse Emissions Abatement

next chapter Blast Furnace: Most Efficient Technologies for Greenhouse Emissions Abatement

Adilson de Castro J, Aparecida Nogueira D, Flavio de Campos M, Silva Guilherme V, Mendes de Oliveira E (2016) Predictions of PCDD/F, SOx, NOx, and particulates in the Iron ore sintering process of integrated steelworks. In: Cavaliere P (ed) Ironmaking and steelmaking processes: greenhouse emissions, Control, and Reduction. Springer, Cham. https://doi.org/10.1007/978-3-319-39529-6_2CrossRef

Ahn H, Choi S, Cho B (2013) Process simulation of iron ore sintering bed with flue gas recirculation. Part 2 – parametric variation of gas conditions. Ironmak Steelmak 40:128–137. https://doi.org/10.1179/1743281212Y.0000000072CrossRef

Babich A, Senk D, Gudenau HW (2016) Ironmaking. Stahleisen GmbH, Düsseldorf

Bin H, Lin Z, Yang Y, Fei L, Cai L, Linjung Y (2017) PM2.5 and SO3 collaborative removal in electrostatic precipitator. Powder Technol 318:484–490. https://doi.org/10.1016/j.powtec.2017.06.008CrossRef

Buchwalder J, Hensel M, Richter J, Lychatz B (2008) Verminderung der Staub-emissionen an der Sinteranlage von ArcelorMittal Eisenhüttenstadt. Stahl und Eisen 128(9):111–117

Cavaliere P (2016) Ironmaking and steelmaking processes: greenhouse emissions, control, and reduction. Springer, Cham. https://doi.org/10.1007/978-3-319-39529-6CrossRef

Cavaliere P, Perrone A (2013) Analysis of dangerous emissions and plant productivity during sintering ore operations. Ironmak Steelmak 40(1):9–24. https://doi.org/10.1179/1743281212Y.0000000019CrossRef

Cavaliere P, Perrone A, Tafuro P, Primavera V (2011) Reducing emissions of PCDD/F in sintering plant: numerical and experimental analysis. Ironmak Steelmak 38(6):422–431. https://doi.org/10.1179/1743281211Y.0000000034CrossRef

Chandrappa R, Chandra Kulshrestha U (2016) Sustainable air pollution management-theory and practice. Springer, Cham. https://doi.org/10.1007/978-3-319-21596-9CrossRef

Chao L, Yu-zhu Z, Yan S, Hong-Wei X, Yue K (2018) Jie L (2018) numerical simulation of sintering based on biomass fuel. Ironmak Steelmak 45(8):700–707. https://doi.org/10.1080/03019233.2017.1323393CrossRef

Chen XL, Fan XH, Gan M, Huang YS, Yu ZY (2018) Sintering behaviours of iron ore with flue gas circulation. Ironmak Steelmak 45(5):434–440. https://doi.org/10.1080/03019233.2017.1280985CrossRef

Chen XL, Fan XH, Jiang T (2010) Operation Guidance System for Iron Ore Sintering Process. In: 2010 international conference on intelligent system design and engineering application. pp 1053–1055. https://doi.org/10.1109/ISDEA.2010.341

Cieplik MK, Carbonell JP, Munoz C, Baker S, Kruger S, Liljelind P, Marklund S, Louw R (2003) On dioxin formation in iron ore sintering. Environ Sci Technol 37(15):3223–3231. https://doi.org/10.1021/es026292gCrossRef

Cores A, Verdeja LF, Ferreira S, Ruiz-Bustinza I, Mochon J, Robla JI, González Gasca C (2015) Iron ore sintering. Part 3: automatic and control systems. Dyna Rev Fac Nac Minas 82(190):227–236. https://doi.org/10.15446/dyna.v82n190.44054CrossRef

Di H, He ZJ, Zhang JH, Pang QH (2018) Experimental study on the effect of iron ore sinter behavior with adding biomass. Meta 57(1–2):27–30

El-Hussiny NA, Khalifa AA, El-Midany AA, Ahmed AA, Shalabi MEH (2015) Effect of replacement coke breeze by charcoal on technical operation of iron ore sintering. Int J Sci Eng Res 6:681–686

Fan X, Yu Z, Gan M, Chen X, Huang Y (2016) Flue gas recirculation in iron ore sintering process. Ironmak Steelmak 43(6):403–410. https://doi.org/10.1179/1743281215Y.0000000029CrossRef

Fan X, Yu Z, Gan M, Chen X, Jiang T, Wen H (2014) Appropriate technology parameters of iron ore sintering process with flue gas recirculation. ISIJ Int 54(11):2541–2550. https://doi.org/10.2355/isijinternational.54.2541CrossRef

Fernández-González D, Ruiz-Bustinza I, Mochón J, González-Gasca C, Verdeja LF (2017a) Iron ore sintering: raw materials and granulation. Miner Proc Extract Met Rev 38(1):36–46. https://doi.org/10.1080/08827508.2016.1244059CrossRef

Fernández-González D, Ruiz-Bustinza I, Mochón J, González-Gasca C, Verdeja LF (2017b) Iron ore sintering: environment, automatic, and control techniques. Miner Proc Extract Met Rev 38(4):238–249. https://doi.org/10.1080/08827508.2017.1288118CrossRef

Fernández-González D, Ruiz-Bustinza I, Mochón J, González-Gasca C, Verdeja LF (2017c) Iron ore sintering: quality indices. Miner Proc Extract Met Rev 38(4):254–264. https://doi.org/10.1080/08827508.2017.1323744CrossRef

Fruehan RJ, Fortini O, Paxton HW, Brindle R (2000) Theoretical minimum energies to produce steel for selected conditions, prepared for the U.S. Department of Energy. U.S. Department of Energy, Washington, DC

Gan M, Fan X, Ji Z, Jiang T, Chen X, Yu Z, Li G, Yin L (2015) Application of biomass fuel in iron ore sintering: influencing mechanism and emission reduction. Ironmak Steelmak 42(1):27–33. https://doi.org/10.1179/1743281214Y.0000000194CrossRef

Goswami A, Selvan VT, Kumar S, Singh MK, Muralimohan D (2013) An intelligent permeability optimization system at sinter plant of Rourkela Steel Plant. Int J Appl Res Mech Eng 3(2):52–55

Griffin PW, Hammond GP (2019) Analysis of the potential for energy demand and carbon emissions reduction in the iron and steel sector. Energy Procedia 158:3915–3922. https://doi.org/10.1016/j.egypro.2019.01.852CrossRef

Guerriero E, Guarnieri A, Mosca S, Rossetti G, Rotatori M (2009) PCDD/Fs removal effi ciency by electrostatic precipitator and wetfi ne scrubber in an iron ore sintering plant. J Hazard Mater 172(2):1498–1504. https://doi.org/10.1016/j.jhazmat.2009.08.019CrossRef

Han J, He X, Qin L, Chen W, Yu F (2013) NOx removal coupled with energy recovery in sintering plant. Ironmak Steelmak 41(5):350–354. https://doi.org/10.1179/1743281213Y.0000000158CrossRef

Hartig W, Stedem K-H, Lin R (2006) Sinter plant waste gas cleaning - state of the art. Rev Met Paris 103(6):257–265. https://doi.org/10.1051/metal:2006138CrossRef

Hauck T, Klima R, Kofler A, Trager B (2003) Improved process control of a sinter plant. Stahl und Eisen 123(4):69–73

He C, Feng Y, Feng D, Zhang X (2018) Exergy analysis and optimization of sintering process. Steel Res Int 89(12):1800065. https://doi.org/10.1002/srin.201800065CrossRef

He K, Wang L (2017) A review of energy use and energy-efficient technologies for the iron and steel industry. Renew Sustain Energy Rev 70:1022–1039. https://doi.org/10.1016/j.rser.2016.12.007CrossRef

Hu J, Wu M, Chen X, Du S, Cao W, She J (2019) Hybrid modeling and online optimization strategy for improving carbon efficiency in iron ore sintering process. Inf Sci 483:232–246. https://doi.org/10.1016/j.ins.2019.01.027CrossRef

Jeong EH, Park JI, Cho BK (2017) Development of waste gas recirculation system with improvement of sintering productivity. In: Proceedings of the 3rd world congress on mechanical, chemical, and material engineering (MCM’17). https://doi.org/10.11159/mmme17.132

Jha G, Soren S (2017) Study on applicability of biomass in iron ore sintering process. Renew Sustain Energy Rev 80:399–407. https://doi.org/10.1016/j.rser.2017.05.246CrossRef

Ji Z, Fan X, Gan M, Chen X, Lv W, Yao J, Cao F, Jiang T (2018) Analysis of commercial activated carbon controlling ultra-fined particulate emissions from iron ore sintering process. ISIJ Int 58(7):1204–1209. https://doi.org/10.2355/isijinternational.ISIJINT-2018-032CrossRef

Jursova S, Pustejovska P, Brozova S (2018) Study on reducibility and porosity of metallurgical sinter. Alexandria Eng J 57(3):1657–1664. https://doi.org/10.1016/j.aej.2017.03.007CrossRef

Karali N, Park WY, McNeil M (2017) Modeling technological change and its impact on energy savings in the U.S. iron and steel sector. Appl Energy 202:447–458. https://doi.org/10.1016/j.apenergy.2017.05.173CrossRef

Karunakaran M, Sivakimar P, Chira N (2019) Electrostatic precipitator in ash removal system: a comprehensive review. Int J Innov Technol Explor Eng 8(4S):321–324

Kriechmair J (2010) Energy efficiency measures and investments-proof of benefits by case studies. In: SEAISI environmental & safety seminar, November 22–24, Manila

Kronberger T, Schaler M, Schönegger C (2012) In: Shatokha DV (ed) Latest generation sinter process optimization systems, sintering-methods and products. ISBN: 978-953-51-0371-4

Lanzerstorfer C (2016) State of the art in air pollution control for sinter plants. In: Cavaliere P (ed) Ironmaking and steelmaking processes: greenhouse emissions, control, and reduction. Springer, Cham. https://doi.org/10.1007/978-3-319-39529-6_18CrossRef

Lanzerstorfer C, Steiner D (2016) Characterization of sintering dust collected in the various fields of the electrostatic precipitator. Environ Technol 37(12):1559–1567. https://doi.org/10.1080/09593330.2015.1120787CrossRef

Li J, He X, Pei B, Li X, Ying D, Wang Y, Jia J (2019a) The ignored emission of volatile organic compounds from iron ore sinter process. J Environ Sci (China) 77:282–290. https://doi.org/10.1016/j.jes.2018.08.007CrossRef

Li X, Sun W, Zhao L, Cai J (2019b) Emission characterization of particulate matter in the ironmaking process. Environ Technol 40(3):282–292. https://doi.org/10.1080/09593330.2017.1387180CrossRef

Liu C, Zhang Y, Zhao K, Xing H, Kang Y (2019) Effect of biomass on reaction performance of sintering fuel. J Mater Sci 54(4):3262–3272. https://doi.org/10.1007/s10853-018-3061-2CrossRef

Liu C, Zhang Y-Z, Zhao K, Xing H-W, Kang Y (2018) Modified biomass fuel instead of coke for iron ore sintering. Ironmak Steelmak. https://doi.org/10.1080/03019233.2018.1507070

Long H-M, Shi Q, Zhang H-L, Wei R-F, Chun T-J, Li J-X (2018) Application status and comparison of dioxin removal technologies for iron ore sintering process. J Iron Steel Res Int 25(4):357–365. https://doi.org/10.1007/s42243-018-0046-yCrossRef

Lovel R, Vining K, Dell’amico M (2007) Iron ore sintering with biochar. Min Proc Ext Met 116(2):85–92CrossRef

Lovel RR, Vining KR, Dell’amico M (2009) The influence of fuel reactivity on iron ore sintering. ISIJ Int 49(2):195–202. https://doi.org/10.2355/isijinternational.49.195CrossRef

Lu L (2015) Iron ore: mineralogy, processing and environmental sustainability. Woodhead Publishing, Cambridge

Lu L, Adam M, Kilburn M, Hapugoda S, Somerville M, Jahanshahi S, Mathieson JG (2013) Substitution of charcoal for coke breeze in iron ore sintering. ISIJ Int 53:1607–1616. https://doi.org/10.2355/isijinternational.53.1607CrossRef

Lu L, Adam M, Kilburn M, Hapugoda S, Somerville M, Jahanshahi S, Mathieson JG (2016) Substitution of charcoal for coke breeze in iron ore sintering. ISIJ Int 53(9):1607–1616. https://doi.org/10.2355/isijinternational.53.1607CrossRef

Lu L, Ishiyama O (2016) Recent advances in iron ore sintering. Min Proc Extract Metall 125(3):132–139. https://doi.org/10.1080/03719553.2016.1165500CrossRef

Machida S, Sato H, Sato M, Takeda K, Ichikawa K, Nushiro K, Ariyama T (2006) Process development of pre-reduced agglomerates in sintering machine for reducing CO2 emission in ironmaking process. In: Proceedings, 4th international congress on the science and technology of ironmaking (ICSTI ‘06), Osaka, Japan, 26–30 Nov 2006. Iron and Steel Institute of Japan, Tokyo, pp 291–294

Marlene M, Naderer G, Fehringer E (2015) Recirculation of sinter off gas-a selective approach. In: Technical contribution to the 45° Seminário de Redução de Minério de Ferro e Matérias-primas, to 16° Simpósio Brasileiro de Minério de Ferro and to 3° Simpósio Brasileiro de Aglomeração de Minério de Ferro, part of the ABM Week, August 17th–21st, 2015, Rio de Janeiro, RJ, Brazil. pp 154–163

Mou JL, Morrison RJ (2016) Sinter plant operations: raw materials. In: Cavaliere P (ed) Ironmaking and steelmaking processes: greenhouse emissions, control, and reduction. Springer, Cham. https://doi.org/10.1007/978-3-319-39529-6_1CrossRef

NEDO (2008) Global warming countermeasures, Japanese technologies for energy savings/GHG emissions reduction, revised edition. New Energy and Industrial Technology Development Organization, Kawasaki

Ni W, Li H, Zhang Y, Zou Z (2019) Effects of fuel type and operation parameters on combustion and NOx emission of the iron ore sintering process. Energies 12(2):213. https://doi.org/10.3390/en12020213CrossRef

Niesler M, Stecko J, Blacha L, Oleksiak B (2014) Application of fine grained coke breeze fractions in the process of iron ore sintering. Meta 53(1):37–39

Ogi H, Maeda T, Ohno KI, Kunitomo K (2015) Effect of coke breeze distribution on coke combustion rate of the quasi-particle. ISIJ Int 55(12):2550–2555. https://doi.org/10.2355/isijinternational.ISIJINT-2015-089CrossRef

Ooi TC, Thomson D, Anderson DR, Fisher R, Fray T, Zandi M (2011) The effect of charcoal combustion on iron-ore sintering performance and emission of persistent organic pollutants. Comb Flame 158:979–987. https://doi.org/10.1016/j.combustflame.2011.01.020CrossRef

Oyama N, Iwami Y, Yamamoto T, Machida S, Yguchi T, Sato H, Takeda K, Watanabe Y, Shimizu M (2011) Development of secondary-fuel injection technology for energy reduction in the iron ore sintering process. ISIJ Int 51:913–921. https://doi.org/10.2355/isijinternational.51.913CrossRef

Pei YD, Wu SL, Chen SG, Zhao ZX, An G, Cheng ZM, Luo YS (2017) Sintering of solid waste generated in iron and steel manufacturing process in Shougang Jingtang. J Iron Steel Res Int 24(7):697–704. https://doi.org/10.1016/S1006-706X(17)30105-XCrossRef

Philipp J, Werner P, Wemhoner R (2000) Decreasing of dioxin emissions at sinter plants. In: Proceedings of 4th European coke and ironmaking congress, Paris, June 19–21. pp 388–407

Porto Pimenta H (2017) Agglomeration technologies-current situation and future trends. In: 47th ABM ironmaking seminar – ABM Week 2017, Sao Paulo, October 2017

Pustějovská P, Sikora M, Brožová S, Jursová S (2017) The environmental benefits of the use of alternative fuels for sintering process. Int Multidiscip Sci GeoConf Surv Geol Min Ecol Manag SGEM 17(51):955–960. https://doi.org/10.5593/sgem2017/51/S20.029CrossRef

Rezvanipour H, Mostafavi A, Ahmadi A, Karimimobarakabadi M, Khezri M (2018) Desulfurization of iron ores: processes and challenges. Steel Res Int 89(7):1700568. https://doi.org/10.1002/srin.201700568CrossRef

Selvan VT, Reddy TS, Das A (2012) Development of an energy efficient curtain flame ignition system for sintering of iron ore fines. Int J Energy Technol Policy 8(1):65–79. https://doi.org/10.1504/IJETP.2012.046019CrossRef

Silval SN, Vernilli F, Pinatti DG, do Nascimento VF, Saito E, Cangani MP, Neves ES, Longo E (2009) Behaviour of biofuel addition on metallurgical properties of sinter. Ironmak Steelmak 36(5):333–340. https://doi.org/10.1179/174328108X287784CrossRef

Singh PK, Kumar AL, Katiyar PK, Maurya R (2017) Agglomeration behaviour of steel plants solid waste and its effect on sintering performance. J Mater Res Technol 6(3):289–296. https://doi.org/10.1016/j.jmrt.2016.11.005CrossRef

Taira K (2019) NOx emission profile determined by in-situ gas monitoring of iron ore sintering during packed-bed coke combustion. Fuel 236:244–250. https://doi.org/10.1016/j.fuel.2018.09.008CrossRef

Tian W, Ni B, Jiang C, Wu Z (2019) Uncertainty analysis and optimization of sinter cooling process for waste heat recovery. Appl Therm Eng 150:111–120. https://doi.org/10.1016/j.applthermaleng.2018.12.162CrossRef

Wang B-X, Zhang Y-Z, Chen W, Chen Y, Zhang H-J (2017a) Charging composition and structure optimisation in the sintering process (part I). Ironmak Steelmak 44(1):52–58. https://doi.org/10.1080/03019233.2016.1156243CrossRef

Wang HT, Zhao W, Chu MS, Feng C, Liu ZG, Tang J (2017b) Current status and development trends of innovative blast furnace ironmaking technologies aimed to environmental harmony and operation intellectualization. J Iron Steel Res Int 24(8):751–769. https://doi.org/10.1016/S1006-706X(17)30115-2CrossRef

Worrell E, Bernstein L, Roy J, Price L, Harnisch J (2009) Industrial energy efficiency and climate change mitigation. Energy Effic 2:109. https://doi.org/10.1007/s12053-008-9032-8CrossRef

Xiong L, Peng Z, Gu F, Ye L, Wang L, Rao M, Zhang Y, Li G, Jiang T (2018) Combustion behavior of granulated coke breeze in iron ore sintering. Powder Technol 340:131–138. https://doi.org/10.1016/j.powtec.2018.09.010CrossRef

Xu Y, Zhou M, Hu J, Xu Y, Luo G, Li X, Yao H (2019) Particulate matter filtration of the flue gas from iron-ore sintering operations using a magnetically stabilized fluidized bed. Powder Technol 342:335–340. https://doi.org/10.1016/j.powtec.2018.09.095CrossRef

Yan K (2009) Electrostatic precipitation: 11th international conference on electrostatic precipitation, Hangzhou, 2008. Springer, Berlin. https://doi.org/10.1007/978-3-540-89251-9CrossRef

Yang L, Liu G, Zheng M, Jin R, Zhu Q, Zhao Y, Zhang X, Xu Y (2017) Atmospheric occurrence and health risks of PCDD/Fs, polychlorinated biphenyls, and polychlorinated naphthalenes by air inhalation in metallurgical plants. Sci Total Environ 580:1146–1154. https://doi.org/10.1016/j.scitotenv.2016.12.071CrossRef

Yu Z, Fan X, Gan M, Chen X, Lv W (2017) NOx reduction in the iron ore sintering process with flue gas recirculation. JOM 69(9):1570–1574. https://doi.org/10.1007/s11837-017-2268-zCrossRef

Yu ZY, Fan XH, Gan M, Chen XL, Chen Q, Huang YS (2016) Reaction behavior of SO2 in the sintering process with flue gas recirculation. J Air Waste Manag Assoc 66(7):687–697. https://doi.org/10.1080/10962247.2016.1167790CrossRef

Zandi M, Martinez-Pacheco M, Fray TAT (2010) Biomass for iron ore sintering. Min Eng 7:1–7. https://doi.org/10.1016/j.mineng.2010.07.010CrossRef

Zhan M-X, Xu S, Cai P, Chen T, Lin X, Buekens A, Li X (2019) Parameters affecting the formation mechanisms of dioxins in the steel manufacture process. Chemosphere 222:250–257. https://doi.org/10.1016/j.chemosphere.2019.01.126CrossRef

Zhang J, He Z, Jin Y (2015b) Utilisation of biomass fuel in sintering process. Mater Res Innov 19:1140–1143. https://doi.org/10.1179/1432891714Z.0000000001265CrossRef

Zhang M, Coe MS, Andrade MW (2015a) Effect of sinter basicity on sinter productivity and quality with high rate of recycled materials. In: Battle TP et al (eds) Drying, roasting, and calcining of minerals. Springer, Cham, pp 259–267. https://doi.org/10.1007/978-3-319-48245-3_32CrossRef

Zhang S, Wen Z, Wang G, Dou R, Liu X, Li X (2018) The effects of operational parameters on flue gas recirculation iron ore sintering process: sensitivity analysis based on numerical simulation and industrial onsite experimental validation. Ironmak Steelmak. https://doi.org/10.1080/03019233.2018.1521565

Zhao F, He Y, Yao Y (2018a) Study on brush of moving electrode type electrostatic precipitator (MEEP). IOP Conf Ser Earth Environ Sci 121:052024. https://doi.org/10.1088/1755-1315/121/5/052024CrossRef

Zhao J, Loo CE, Yuan J, Wang F, Wang J, Zhang H, Miao H (2018b) A fundamental study of the cocombustion of coke and charcoal during iron ore sintering. Energy Fuel 32(8):8743–8759. https://doi.org/10.1021/acs.energyfuels.8b00939CrossRef

Zhou H, Cheng M, Zhao J-P, Zhou M-X, Liu Z-H (2018) Evaluation of the adhering layer ratio of iron ore granules and its influence on combustion-generated NOx emission in iron ore sintering. J Zheijang Univ Sci A 19(6):479–490. https://doi.org/10.1631/jzus.A1700193CrossRef

Zhou XJ, Buekens A, Li XD, Ni MJ, Cen KF (2016) Adsorption of polychlorinated dibenzo-p-dioxins/dibenzofurans on activated carbon from hexane. Chemosphere 144:1264–1269. https://doi.org/10.1016/j.chemosphere.2015.10.003CrossRef

Zhu T, Xu W, Guo Y, Li Y (2016) Pollutants emission and control for sintering flue gas. In: Cavaliere P (ed) Ironmaking and steelmaking processes: greenhouse emissions, control, and reduction. Springer, Cham. https://doi.org/10.1007/978-3-319-39529-6_4CrossRef

Title: Sintering: Most Efficient Technologies for Greenhouse Emissions Abatement
Author: Pasquale Cavaliere
Publisher: Springer International Publishing
Book: Clean Ironmaking and Steelmaking Processes
Print ISBN: 978-3-030-21208-7

Electronic ISBN: 978-3-030-21209-4

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-030-21209-4_3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners