Top

Journal of Materials Engineering and Performance

Published in:

26-06-2019

Studies on Ti, Zn and Ti + Zn Bilayer Coatings on Interstitial Free Steel for Enhancement of Wear and Corrosion Resistance

Authors: M. K. Debnath, J. Dutta Majumdar, A. Kumar, S. Seth, S. Mukherjee, I. Manna

Published in: Journal of Materials Engineering and Performance | Issue 7/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The present study concerns a detailed investigation of the microstructure, phase identity, composition, residual stress, wear and corrosion behavior of Ti, Zn and Zn + Ti coatings developed on IF steel by sputter deposition technique. A significant improvement in average microhardness (350-700 VHN) is noticed following sputter deposition compared to that of as-received IF steel (190 VHN). The highest microhardness recorded is 500 VHN for Ti, 350 VHN for Zn and 700 VHN for Ti + Zn bilayer, respectively. Improvement in surface hardness is accompanied by a marked improvement in wear resistance of the sputter-deposited surface against hardened steel ball. The corrosion rate of coated sample in 3.56 wt.% NaCl solution is marginally decreased (2.95 × 10⁻² to 3.25 × 10⁻² mm/year) as compared to that of as-received IF steel (3.55 × 10⁻² mm/year). Ti-deposited IF steel registers the minimum corrosion rate (2.95 × 10⁻² mm/year) among all the coated samples.

previous article Microstructure and Mechanical Properties of a SiO2 Ceramic and TC4 Alloy Joint Brazed with a Nanocomposite Filler

next article Butt Laser Welding–Brazing of AZ31 Mg to Nickel-Coated Ti-6Al-4V

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

M. Yano, S. Kitamura, K. Harashima, T. Inomoto, K. Azuma, and H. Nagahama, Recent Advances in Ultralow-Carbon Steel Refining Technology by Vacuum Degassing Process. Nippon steel technical, report no. 61, include country. UDC669.184:621.74.047 (1994), pp. 15–21.

M.G. Fontana, Corrosion Engineering, McGraw-Hill Book Co., New York, 1986, p 1

K.G. Budinski, Surface Engineering for Wear Resistance, Prentice Hall, New York, 1988, p 138–162

H. Xiaodong, C. Binkai, Y. Wugang, and Z. Qifu, Influence of Galvannealed Process on Coating Corrosion Resistance of High Strength IF Steel, Mater. Corros., 2008, 59, p 825–830CrossRef

M.K. Debnath, J. Dutta Majumdar, and I. Manna, Studies on Plasma Surface Nitriding of Interstitial Free Steel, 2010 TMS annual meeting and exhibition

P.J. Kelly and R.D. Arnell, Magnetron Sputtering: A Review of Recent Developments and Applications, Vacuum, 2000, 56, p 159–172CrossRef

K.A. Whitehead, J.S. Colligon, and J. Verran, The Production of Surfaces of Defined Topography and Chemistry for Microbial Retention Studies, Using Ion Beam Sputtering Technology, Int. Biodeterior. Biodegrad., 2004, 54, p 143–151CrossRef

C.P. Qin, Y.G. Zheng, and R. Wei, Cavitation Erosion Behavior of Nanocomposite Ti-Si-C-N and Ti/Ti-Si-C-N Coatings Deposited on 2Cr13 Stainless Steel using a Plasma Enhanced Magnetron Sputtering Process, Surf. Coat. Technol., 2010, 204, p 3530–3538CrossRef

M. Bromark, M. Larsson, P. Hedenqvist, and S. Hogmark, Wear of PVD Ti/TiN Multilayer Coatings, Surf. Coat. Technol., 1997, 90, p 217CrossRef

10.

H.-P. Feng, C.-H. Hsu, L. Jung-Kai, and Y.-H. Shy, Effects of PVD Sputtered Coatings on the Corrosion Resistance of AISI, 304 Stainless Steel, Mater. Sci. Eng., A, 2003, 347, p 123–129CrossRef

11.

C. Fonseca, F. Vaz, and M.A. Barbosa, Electrochemical Behaviour of Titanium Coated Stainless Steel by R. F. Sputtering in Synthetic Sweat Solutions for Electrode Applications, Corros. Sci., 2004, 46, p 3005–3018CrossRef

12.

B. Subramanian and M. Jayachandran, Electrochemical Corrosion Behavior of Magnetron Sputtered TiN Coated Steel in Simulated Bodily Fluid and its Hemocompatibility, Mater. Lett., 2008, 62, p 1727–1730CrossRef

13.

David T-O, Sandra RE, and Muhl S, Electrochemical Behavior of Titanium Thin Films Obtained by Magnetron Sputtering, Mater. Sci. (Medžiagotyra), 2008;14:15–19. ISSN 1392-1320

14.

Y. Massiani, A. Medjahed, J.P. Crousier, P. Gravier, and I. Rebatel, Corrosion of Sputtered Titanium Nitride Films Deposited on Iron and Stainless Steel, Surf. Coat. Technol., 1991, 45, p 115–120CrossRef

15.

https://www.gaa.com.au/types-of-galvanizing-and-other-zinc-coatings/. Accessed on 28 Sep 2018

16.

B.D. Cullity, Elements of X-Ray Diffraction, Addison-Wesley, Reading, 1956, p 102

17.

C.M. Garzon, J.E. Alfonso, E.C. Corredor, A.A. Recco, and A.P. Tschiptschin, Growth and Morphology of Ultra-thin Ni Films on Pd(1 0 0), Microelectron. J., 2008, 39, p 1329–1330CrossRef

18.

A.R. Marder, The Metallurgy of Zinc-Coated Steel, Prog. Mater. Sci., 2000, 45, p 191–271CrossRef

19.

P.R. Chidambaram, V. Rangarajan, and W.J. van Ooij, Characterization of High Temperature Hot Dip Galvanized Coatings, Surf. Coat. Technol., 1991, 46, p 245–253CrossRef

20.

E.P.P. Panagiotidis, A.S. Antonatos, and G.M. Tsananas, Case depth determination by using Vickers microhardness test method, in Proceedings of the 4th International Congress on Non Destructive Testing organized by Hellenic Society of Non destructive Testing, held in Chania-Greece, during 11th to 14th October, 2007

21.

W. Lauwerens, A. De Boeck, M. Thijs, S. Claessens, M. Van Stappen, and P. Steenackers, Physical Vapor Deposition of Al-Ti and Al-Mn Coatings for High Temperature Corrosion Protection of Sheet Steel, Surf. Coat. Technol., 2001, 146, p 27–32CrossRef

22.

M. Trampert, Properties of Sputtered Deposited Zinc and Zinc Alloys Coatings, Doctoral Thesis, University of Saarbrucken, 15/12/2006

Title: Studies on Ti, Zn and Ti + Zn Bilayer Coatings on Interstitial Free Steel for Enhancement of Wear and Corrosion Resistance
Authors: M. K. Debnath
J. Dutta Majumdar
A. Kumar
S. Seth
S. Mukherjee
I. Manna
Publication date: 26-06-2019
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 7/2019
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-019-04159-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2019

Application of Selected Artificial Intelligence Methods in a System Predicting the Microstructure of Compacted Graphite Iron

Influence of Melt-Pouring Temperature and Composition of Primary Coating of Shell Mold on Tensile Strength and Creep Resistance of Ni-Based Superalloy

A Comparative Study on Artificial Neural Network, Phenomenological-Based Constitutive and Modified Fields–Backofen Models to Predict Flow Stress in Ti-4Al-3V-2Mo-2Fe Alloy

The 73rd World Foundry Congress

Environmentally Friendly Foundry Molding and Core Sands

Development of Mathematical Relationships for Calculating Material-Dependent Flowability of Green Molding Sand

Premium Partners