Top

Metallurgist

Published in:

12-03-2024

Study of Out-of-Roundness of a Railway Wheel Blank During Upsetting

Authors: S. A. Snitko, S. M. Gorbatyuk, K. N. Solomonov, V. V. Pilipenko, A. A. Tokar

Published in: Metallurgist | Issue 9-10/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The process of upsetting the initial blank of a railway wheel between smooth dies was studied. Finite element modeling demonstrated that substantial vertical deformation (75–77%) and the application of rolling lubricant result in a complete correction of the out-of-roundness of the initial blanks, measuring up to 5 mm. The results of the study can be used to implement the production of stamped-rolled railway wheels using a two-stage technology of stamping a blank for rolling on a press-rolling line.

previous article Modeling Reeling Process of Capillary Tubes Following Mandrel Drawing

next article Artificial Intelligence and Machine Learning In Metallurgy. Part 2. Application Examples

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

I.V. Ushakov, “Method of mechanical testing of laser treated metallic glass by indenters with different geometry,” in: Proc. SPIE 6597, Nanodesign, Technology, and Computer Simulations, 659714 (2007); DOI: https://doi.org/10.1117/12.726773

I. V. Ushakov and I. S. Safronov, “Directed changing properties of amorphous and nanostructured metal alloys with help of nanosecond laser impulses,” CIS Iron Steel Rev., 22, 77–81 (2021); DOI: https://doi.org/10.17580/cisisr.2021.02.14CrossRef

V. E. Kondratenko, V. V. Devyatiarova, S. V. Albul, and D. S. Kartyshev, “Improving methodology for calculating scaffolding formwork of monolithic slabs in building constructions,” IOP Conf. Series: Mater. Science and Engineering, 971, No. 5, 052037 (2020); DOI:https://doi.org/10.1088/1757-899X/971/5/052037

A. D. Bardovsky, A. A. Gerasimova, and I. I. Basyrov, “Constructive solutions for upgrading of the drive of processing equipment,” IOP Conf. Series: Mater. Science and Engineering, 709, No. 2, Article No 022015 (2020); DOI: https://doi.org/10.1088/1757899X/709/2/022015

A. S. Shinkaryov, D. Y. Ozherelkov, I. A. Pelevin, S. A. Eremin, V. N. Anikin, M. A. Burmistrov, S. V. Chernyshikhin, A. A. Gromov, and A. Y. Nalivaiko, “Laser fusion of aluminum powder coated with diamond particles via selective laser melting: powder preparation and synthesis description,” Coatings, 11, No.10 (1219) (2021).

Yu. A. Kulagin, E. O. Baranov, A. S. Shinkarev, G. A. Avatinyan, et al., “New aspects of developing ice and laser technologies for top sports of higher achievements,” Kholod. Tekh., No. 12, 36–43 (2016).

O. Y. Ganzulenko and A. P. Petkova, “Simulation and approbation of the marking laser process on metal materials,” J. Physics: Conf. Series., 1753, No. 1, 012016 (2021).

V. E. Brunman, A. S. Vataev, A. N. Volkov, A. P. Petkova, and D. G. Plotnikov, “Optimizing pump-drive operation to improve the energy-efficiency of oil extraction,” Russ. Eng. Res., 37, No. 6, 479–484 (2017).CrossRef

N. N. Tatarnikov, V. S. Yusupov, and B. F. Belelyubsky, “Manufacturing of work-rolls with higher geometry and roughness requirements for rolling the thinnest strip,” AIP Conf. Proc., 2697, 030012 (2023); DOI:https://doi.org/10.1063/5.0135274.CrossRef

10.

A. V. Kushnarev, A. A. Kirichkov, V. D. Shestak, et al., “Experience in production ramp-up of wheels at a new forming rolling mill,” Stal’, No. 12, 44–46 (2010).

11.

R. P. Pogrebnyak, “Experimental study of the shape of a rolled billet of a railway wheel,” Proisv. Prokat., No. 2, 29–33 (2012).

12.

S. A. Snitko and A. V. Yakovchenko, “Influence of axial compression mode on the variation in thickness of wheel rim at the initial stage of its rolling,” Metallurg, No. 5, 46–51 (2017).

13.

S. A. Snitko, A. V. Yakovchenko, and A. L. Sotnikov, “Improvement of technology and equipment in wheel-rolling production,” Vestn. DonNTU, No. 4(10), 13–21 (2017).

14.

Y. S. Tarasov, A. G. Radyuk, and S. M. Gorbatyuk, “Effect of the thermal insulation of the inner wall on the thermal condition of the air tuyeres of blast furnaces,” Metallurgist, 61, No 9–10, 745–750 (2018).CrossRef

15.

A. V. Pichuev and V. L. Petrov, “Equivalent circuit for mine power distribution systems for the analysis of insulation leakage current,” Min. Sci. Technol. (Russian Federation), 8, No. 1, 78–86 (2023).CrossRef

16.

V. V. Devyatiarova, E. E. Balakhnina, and L. M. Valeeva, “Development of a mathematical model for a workpiece heating and cooling in a protective medium while treatment under pressure,” DDF, 410, 115–122 (2021); DOI: https://doi.org/10.4028/www.scientific.net/DDF.410.115CrossRef

17.

T. Gangopadhyay, R. K. Ohdar, D. K. Pratiharet, and I. Basak, “Three-dimensional finite element analysis of multistage hot forming of railway wheels,” Int. J. Adv. Manuf., 53, Issue 1, 301–312 (2011).CrossRef

18.

S. Xiaohui, Y. Jun, A. Tao, et al., “Analysis of railway wheel rolling process based on three-dimensional simulation,” Int. J. Adv. Manuf., 72, Issue 1, 179–191 (2014).

19.

E. I. Shifrin, A. V. Shramko, V. L. Merezhko, and L. V. Golubeva, “Advanced equipment and methods of cutting ingots into individual billets for railway wheels and tires,” Metallurg. Gornorud. Prom., No. 1, 48–52 (2004).

20.

A. V. Kushnarev, A. A. Bogatov, A. A. Kirichkov, and Yu. P. Petrenko, “New technology for producing high-quality railway wheels,” Stal’, No. 3, 58–62 (2010).

21.

W. Koppers, M. Kunz, and M. Lindenblatt, “Advanced production of railway wheels,” Chern. Met., No. 3, 75–79 (2006).

22.

A. V. Kushnarev, A. A. Bogatov, and V. A. Kropotov, “Mathematical modeling of rough forging and fine blanking of continuously cast blanks used in the production of railway wheels,” Kuzn.-Shtamp. Proiz., No. 1, 34–38 (2010).

23.

S. M. Gorbatyuk, A. Yu. Zarapin, and N. A. Chichenev, “Modernization of the vibrating screen of the KATOKA (ANGOLA) Mining Company,” Gorn. Inform.-Analyt. Byull., No. 1, 143–149 (2018).

24.

S. Snitko and A. Duzhurzhi, “Features finite-element modeling of the deformation exact mass,” J. Comput. Theor. Nanosci., 9, No. 9, 1505–1510 (2012).CrossRef

Title: Study of Out-of-Roundness of a Railway Wheel Blank During Upsetting
Authors: S. A. Snitko
S. M. Gorbatyuk
K. N. Solomonov
V. V. Pilipenko
A. A. Tokar
Publication date: 12-03-2024
Publisher: Springer US
Published in: Metallurgist / Issue 9-10/2024
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-024-01647-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2024

Complex Heat Transfer in a Bath under Arcs of High-Power Arc Steel-Melting Furnaces. Part I. Laws of Thermal Radiation of Gas Volumes and their Rationale for Calculating Heat Transfer in EAFs

Choice of a Sorbent for Copper and Cobalt Sorption from Gold-Containing Heap Leaching Solutions

Decarbonization of Exhaust Gases of Industrial Metallurgical Furnaces

Processing of Rare Earth Metal Oxide for Use as a Master Alloy in the Metallurgical Industry

Microstructure, Mechanical, and Corrosion Properties of Cast Heat-Resistant Al–4Zn–4Mg–4Cu–Zr–Y(Er) Alloy

Artificial Intelligence and Machine Learning In Metallurgy. Part 2. Application Examples

Premium Partners