Top

Applied Composite Materials

Published in:

15-11-2018

Support for Decision Making in Design of Composite Laminated Structures. Part 1: Parametric Knowledge Model

Authors: Gilberto Fontecha Dulcey, Xavier Fischer, Pierre Joyot, Georges Fadel

Published in: Applied Composite Materials | Issue 2/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The design process of laminated composites faces two challenges: the engineer designs the product and its morphology, but also, simultaneously, the material. The number of design solutions can be huge since the solution space is very large. Standard CAE systems (CAD, Finite Element Simulation) do not offer to the designer an approach to explore design spaces easily handling design parameters that are intrinsic to the laminate structures: number of plies, layers’ constitutive laws, viscoelastic capacity of the matrix and volume fraction of fibers. This paper provides a new model of behavior making explicit these design parameters. This Parametric and reduced Behavior Model (PRBM) allows engineers to make rapid simulations of the product they are creating. Integrated in a meta-model of Knowledge, it is combined to usual specific knowledge that are typically the domain of composite experts and manufacturing experts. Our PRBM is made from a separated numerical method, next enabling (1) a multiscale approach: the engineer can implement reasoning either at the scale of the fiber, or at the scale of the ply, at the scale of the plies interfaces, at the scale of the lamination or at the scale of the structure, or, (2) a multiphysical approach: the engineer can independently manage the mechanical effect of each ply and each interface, either in static or dynamic cases; in the latter, the creeping behavior can be considered. Two simple cases are presented to illustrate the relevance of the PRBM when simulating composite structures: one under a static load and the having a dynamic behavior.

previous article An Investigation into the Effects of Cure and Post-Cure Process Parameters on Out-Of-Autoclave Bismaleimide Composite Fabrication by Design of Experiments

next article Support for Decision Making in Design of Composite Laminated Structures. Part 2: Reduced Parametric Model-Based Optimization

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Bassam, E.S., Hallett, S.R.: Multiscale surrogate modelling of the elastic response of thick composite structures with embedded defects and features. Compos. Struct. Compos. Struct. 200, 781–798, Elsevier (2018). https://doi.org/10.1016/j.compstruct.2018.05.078 CrossRef

Beaumont, P.W.R.: On the problems of cracking and the question of structural integrity of engineering. Compos. Mater. Appl. Compos. Mater. 21(1), 5–43, Springer (2014). https://doi.org/10.1007/s10443-013-9356-1 CrossRef

Bogdanor, M., Oskay, C., Clay, S.: Multiscale modeling of failure in composites under model parameter uncertainty. Comput. Mech. 56(3), 389–404, Springer (2015). https://doi.org/10.1007/s00466-015-1177-7 CrossRef

Bognet, B., Bordeu, F., Chinesta, F., Leygue, A., Poitou, A.: Advanced simulation of models defined in plate geometries: 3D solutions with 2D computational complexity. Comput. Methods Appl. Mech. Eng. 201–204, 1–12 (2012). https://doi.org/10.1016/j.cma.2011.08.025 CrossRef

Carrera, E.: Theories and finite elements for multilayered, anisotropic, composite plates and shells. Arch. Comput. Methods Eng. 9, 87–140 (2002). https://doi.org/10.1007/BF02736649 CrossRef

Carrera, E., Pagani, A.: Multi-line enhanced beam model for the analysis of laminated composite structures. Compos. Part B Eng. 57, 112–119 (2014). https://doi.org/10.1016/j.compositesb.2013.09.046 CrossRef

Chinesta, F., Leygue, A., Bordeu, F., Aguado, J.V., Cueto, E., Gonzalez, D., Alfaro, I., Ammar, A., Huerta, A.: PGD-based computational Vademecum for efficient design, optimization and control. Archives of Computational Methods in Engineering. 20(1), 31–59 (2013, Springer). https://doi.org/10.1007/s11831-013-9080-x CrossRef

Darko, Ivančević, Smojver, I.: Explicit multiscale modelling of impact damage on laminated composites – part i: validation of the micromechanical model. Compos. Struct 145, Elsevier, (2016). doi:https://doi.org/10.1016/j.compstruct.2016.02.048

De Faria, A.R.: Optimization of composite structures under multiple load cases using a discrete approach based on lamination parameters. Int. J. Numer. Methods Eng. 104(9), 827–843, International Journal for Numerical method in Engineering, Wiley (2015). https://doi.org/10.1002/nme.4941 CrossRef

10.

Fontecha Dulcey, G., Fischer, X., Joyot, P.: An experiment-based method for parameter identification of a reduced multiscale parametric viscoelastic model of a laminated composite beam. Multiscale Multidiscip. Model. Exp. Des. (2018a). https://doi.org/10.1007/s41939-018-0018-8

11.

Fontecha Dulcey, G., Fischer, X., Joyot, P., Fadel G.: Support for decision making in Design of Composite Laminated Structures; part 2: reduced parametric model-based optimization. Springer Nature (2018b)

12.

Galiotis C.P.: Interfacial damage modelling of composites, pp. 33–64, A. in Multi-Scale Modelling of Composite Material Systems 1st Edition, Soutis C., Beaumont P W R Eds., Woodhead Publishing ISBN: 9781855739369, (2005)

13.

Ghiasi, H., Pasinin, D., Lessard, L.: Optimum stacking sequence design of composite materials part I: constant stiffness design. Compos. Struct. 90(1), 1–11, Elsevier (2009). https://doi.org/10.1016/j.compstruct.2009.01.006 CrossRef

14.

Hosseini Kordkheili, S.A., Toozandehjani, H., Soltani, Z.: A progressive multi-scale fatigue model for life prediction of laminated composites. J. Compos. Mater. 51(20), 2949–2960, Sage (2017). https://doi.org/10.1177/0021998317709610 CrossRef

15.

Jeong Sik, K., Arronche, L., Farrugia, A., Muliana, A., La Saponara, V.: Multi-scale modeling of time-dependent response of smart sandwich constructions. Compos. Struct. 93(9), 2196–2207, Elsevier (2011). https://doi.org/10.1016/j.compstruct.2011.03.0062011 CrossRef

16.

Kwon, Y.W., Allen, D.H., Talreja, R.: Multiscale Modeling and Simulation of Composite Materials and Structures. Springer, New York (2008)CrossRef

17.

Ladevèze, P.: Multiscale modelling and computational strategies for composites. Int. J. Num. Method Eng. 60(1), 233–253, Wiley (2004). https://doi.org/10.1002/nme.960 CrossRef

18.

Macquart, T., Maes, V., Bordogna, M.T., Pirrera, A., Weaver, P.M.: Optimisation of composite structures – enforcing the feasibility of lamination parameter constraints with computationally-efficient maps. Compos. Struct. 192, 605–615 (2018). https://doi.org/10.1016/j.compstruct.2018.03.049 CrossRef

19.

Llorca, J.L., Gonzalez, C., Molina-Aldareguia, J., Lopes, C.S.: Multiscale modeling of composites: toward virtual testing and beyond. J. Min. Metals Mater. Soc. 65(2), 1–11 (2012). https://doi.org/10.1007/s11837-012-0509-8

20.

Masoumi, S., Salehi, M., Akhlaghi, M.: Nonlinear viscoelastic analysis of laminated composite plates – a multi scale approach, Int. J. Recent Adv. Mech. Eng. (IJMECH) 2 (2), (2013)

21.

McCartney, L.N: Multi-scale predictive modelling of cracking in laminate composites, pp. 65–98, A. in Multi-Scale Modelling of Composite Material Systems 1st Edition, Soutis C., Beaumont P W R Eds., Woodhead Publishing. ISBN: 9781855739369, (2005)

22.

Mitsunori, M., Sugiyamat, Y.: Optimum design of laminated composite plates using lamination parameters. AIAA J. 31(5), 921–922 (1993). https://doi.org/10.2514/3.49033 CrossRef

23.

Monte, S.M.C., Infante, V., Madeira, J.F.A., Moleiro, F.: Optimization of fibers orientation in a composite specimen. Mech. Adv. Mater. Struct. 24(5), 410–416, Talyor and Francis (2017). https://doi.org/10.1080/15376494.2016.1191099 CrossRef

24.

Prulière, E., Chinesta, F., Ammar, A.: On the deterministic solution of multidimensional parametric models using the proper generalized decomposition. Math. Comput. Simul. 81, 791–810 (2010). https://doi.org/10.1016/j.matcom.2010.07.015 CrossRef

25.

Ranaivomiarana N., Irisarri F.X., Bettebghor D., Desmorat B., Concurrent optimization of material spatial distribution and material anisotropy repartition for two-dimensional structures. Continuum Mech. Thermodynam. 1–14, , Springer, (2018). doi:https://doi.org/10.1007/s00161-018-0661-7

26.

Reddy, J.N. (ed.): Mechanics of composite materials. Springer Netherlands, Dordrecht (1994)

27.

Sonmez, F.O.: Optimum design of composite structures: a literature survey (1969–2009). J. Reinforced Plastics Compos. 36(1), 3–39 (2017, Sage Journals). https://doi.org/10.1177/0731684416668262 CrossRef

28.

Soutis, C., Beaumont, P.W.R.: Multi-scale modelling of composite material systems 1st Edition, Woodhead Publishing. ISBN: 9781855739369, (2005a)

29.

Soutis C., Beaumont P.W.R.: Multi-scale modelling of composite material systems: the art of predictive damage modelling, Woodhead, (2005b)

30.

Wang C.H.: Progressive multi-scale modelling of composite laminates, pp. 259–277, A. in Multi-Scale Modelling of Composite Material Systems 1st Edition, Soutis C., Beaumont P W R Eds., Woodhead Publishing, , ISBN: 9781855739369, (2005)

31.

Xinxing, T.X.: Wenjie Ge, Yonghong Zha, optimal fiber orientation and topology design for compliant mechanisms with fiber-reinforced composites. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 231(12), 2302–2312 (2017). https://doi.org/10.1177/0954406216631783 CrossRef

32.

Zhao, J., Xueling, F., Sun, Q.: Stacking sequence optimization of composite laminates for maximum buckling load using permutation search Algorithm. Compos. Struct. 121, 225–236, Elsevier (2015). https://doi.org/10.1016/j.compstruct.2014.10.031

Title: Support for Decision Making in Design of Composite Laminated Structures. Part 1: Parametric Knowledge Model
Authors: Gilberto Fontecha Dulcey
Xavier Fischer
Pierre Joyot
Georges Fadel
Publication date: 15-11-2018
Publisher: Springer Netherlands
Published in: Applied Composite Materials / Issue 2/2019
Print ISSN: 0929-189X
Electronic ISSN: 1573-4897
DOI: https://doi.org/10.1007/s10443-018-9741-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2019

Synergistic Effects among the Structure, Martensite Transformation and Shear Band in a Shape Memory Alloy-Metallic Glass Composite

Numerical Analysis on Process-Induced Residual Stress in Thick Semi-Cylindrical Composite Shell Using a State-Dependent Viscoelastic Model

Analysis Model and Numerical Simulation of Thermoelectric Response of CFRP Composites

Indirect Microwave Curing Process Design for Manufacturing Thick Multidirectional Carbon Fiber Reinforced Thermoset Composite Materials

Control of Braid Pattern on Every Side of a Braided Composite Part Produced by Asymmetrical Braiding Process

Support for Decision Making in Design of Composite Laminated Structures. Part 2: Reduced Parametric Model-Based Optimization

Premium Partners