Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Materials Engineering and Performance
Published in: Journal of Materials Engineering and Performance 9/2020

01-09-2020

Surface Chemistry and Semiconducting Properties of Passive Film and Corrosion Resistance of Annealed Surgical Stainless Steel

Authors: Rodrigo Kenji de Oliveira, Olandir Vercino Correa, Mara Cristina Lopes de Oliveira, Renato Altobelli Antunes

Published in: Journal of Materials Engineering and Performance | Issue 9/2020

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

ASTM F-139 surgical stainless steel was subjected to annealing treatments at 700 °C for different times. The effect of annealing on the chemical composition of the passive film was evaluated by x-ray photoelectron spectroscopy. The correlation of the surface chemistry with the corrosion behavior and semiconducting properties of the passive film was also investigated. Potentiodynamic polarization tests were conducted in phosphate-buffered solution at 37°C. The semiconducting character of the passive film was assessed by the Mott–Schottky approach. The microstructure of the annealed samples was characterized by optical microscopy. The grain size increased after annealing, but the differences between each annealing condition were not significant and could not be associated with the corrosion behavior of the annealed samples. The corrosion resistance was improved depending on the heat treatment condition due to compositional changes of the passive film upon annealing. The best corrosion properties were observed after annealing for 8 h which was ascribed to Cr2O3, MoO3 and FeO enrichment in the passive film.
previous article Tower-Like ZnO Nanorod Bundles Grown on Freestanding Diamond Wafers for Electron Field Emission Improvement
next article Structural and Hydrogen Storage Properties of Mg60-Ni40 and Mg80-Ni20 Alloys Prepared by Planar Flow Casting

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
K. Prasad, O. Bazala, M. Chua, M. Rochford, L. Fedrick, J. Spoor, R. Symes, M. Tieppo, C. Collins, A. Cao, D. Markwell, K. Ostrikov, and K. Bazaka, Metallic Biomaterials: Current Challenges and Opportunities, Materials, 2017, 10, p 884-1–884-33
2.
N. Eliaz, Corrosion of Metallic Biomaterials: A Review, Materials, 2019, 12, p 407-1–407-91
3.
E.F. Pieretti, S.M. Manhabosco, L.F.P. Dick, S. Hinder, and I. Costa, Localized Corrosion Evaluation of the ASTM F139 Stainless Steel Marked by Laser Using Scanning Vibrating Electrode Technique, X-Ray Photoelectron Spectroscopy and Mott-Schottky Techniques, Electrochem. Acta, 2014, 124, p 150–155
4.
M.D. Pereda, K.W. Kang, R. Bonetto, C. Llorente, P. Bilmes, and C. Gervasi, Impact of Surface Treatment on the Corrosion Resistance of ASTM F138-F139 Stainless Steel for Biomedical Applications, Proc. Mater. Sci., 2012, 1, p 446–453
5.
N. Hassan and N.A.A. Ghany, Corrosion of Biomaterials: Anodic Treatment and Evaluation of 316L Stainless Steel in Simulated Body Fluid, Corros. Eng. Sci. Technol., 2017, 52, p 267–275
6.
K. Rokosz and T. Hryniewicz, Pitting Corrosion Resistance of AISI, 316L Stainless Steel in Ringer’s Solution After Magnetoelectrochemical Polishing, Corrosion, 2010, 66, p 035004-1–035004-11
7.
P. Guzmán, W. Aperador, and L. Yate, Enhancement of the Pitting Corrosion Resistance of AISI, 316LVM Steel with Ta-Hf-C/Au Bilayers for Biomedical Applications, J. Nanomater., 2017, 2017, p 6825250-1–6825250-10
8.
A. Bekmurzayeva, W.J. Duncanson, H.S. Azevedo, and D. Kanayeva, Surface Modification of Stainless Steel for Biomedical Applications: Revisiting a Century-Old Material, Mater. Sci. Eng. C, 2018, 93, p 1073–1089
9.
M. Talha, C.K. Behera, and O.P. Sinha, A Review on Nickel-Free Nitrogen Containing Austenitic Stainless Steels for Biomedical Applications, Mater. Sci. Eng. C, 2013, 33, p 3563–3575
10.
V. Azar, B. Hashemi, and M.R. Yazdi, The Effect of Shot Peening on Fatigue and Corrosion Behavior of 316L Stainless Steel in Ringer’s Solution, Surf. Coat. Technol., 2010, 204, p 3546–3551
11.
B. Deng, Y.M. Jiang, J. Gao, and J. Li, Effect of Annealing Treatment on Microstructure Evolution and the Associated Corrosion Behavior of a Super-Duplex Stainless Steel, J. Alloys Compd., 2010, 403, p 461–464
12.
H. Tan, Y. Jiang, B. Deng, T. Sun, J. Xu, and J. Li, Effect of Annealing Temperature on the Pitting Corrosion Resistance of Super Duplex Stainless Steel UNS S32750, Mater. Charact., 2009, 60, p 1049–1054
13.
A.A. Aghuy, M. Zakeri, M.H. Moayed, and M. Mazinani, Effect of Grain Size on Pitting Corrosion of 304L Austenitic Stainless Steel, Corros. Sci., 2015, 94, p 368–376
14.
C. Bitondo, A. Bossio, T. Monetta, M. Curioni, and F. Bellucci, The effect of Annealing on the Corrosion Behaviour of 444 Stainless Steel for Drinking Water Applications, Corros. Sci., 2014, 87, p 6–10
15.
I.G. Ogunsanya and C.M. Hansson, The Semiconductor Properties of Passive Films and Corrosion Behavior of Stainless Steel Reinforcing Bars in Simulated Concrete Pore Solution, Materialia, 2019, 6, p 100321-1–100321-14
16.
G. Tranchida, M. Clesi, F. Di Franco, F. Di Quarto, and M. Santamaria, Electronic Properties and Corrosion Resistance of Passive Films on Austenitic and Duplex Stainless Steels, Electrochim. Acta, 2018, 273, p 412–423
17.
R.A. Antunes, M.C.L. Oliveira, and I. Costa, Study of the Correlation Betweeen Corrosion Resistance and Semiconducting Properties of the Passive Film of AISI, 316L in Physiological Solution, Mater. Corros., 2012, 63, p 586–592
18.
J. Zhang, X. Hu, and K. Chou, Effect of Thiosulfate on Corrosion Behavior and Passive Films of Duplex Stainless Steel 2205 in Chloride Solutions, Int. J. Electrochem. Sci., 2019, 14, p 9960–9973
19.
N.B. Hakiki, S. Boudin, B. Rondot, and M. Da Cunha Belo, The Electronic Structure of Passive Films Formed on Stainless Steels, Corros. Sci., 1995, 37, p 1809–1822
20.
H.-Y. Ha, J.H. Jang, T.-H. Lee, C. Won, C.-H. Lee, J. Moon, and C.-G. Lee, Investigation of the Localized Corrosion and Passive Behavior of Type 304 Stainless Steels with 0.2–1.8 wt% B, Materials, 2018, 11, p 2097-1–2097-15
21.
Y. Zhang, H. Luo, Q. Zhang, H. Yu, and J. Lv, Characterization of Passive Films Formed on As-Received and Sensitized AISI, 304 Stainless Steel, Chin. J. Mech. Eng., 2019, 32, p 27-1–27-12
22.
R.M. Fernández-Domene, R. Sánchez-Tovar, C. Escrivà-Cerdán, R. Leiva-García, and J. García-Antón, Study of Passive Films Formed on AISI, 316L Stainless Steel in Non-polluted and Underwater-Volcano-Polluted Seawater, Corrosion, 2014, 70, p 390–401
23.
H. Xu, L. Wang, D. Sun, and H. Yu, The Passive Oxide Films Growth on 316L Steel in Borate Buffer Solution Measured by Real-Time Spectroscopic Ellipsometry, Appl. Surf. Sci., 2015, 351, p 367–373
24.
A. Kocijan, C. Donik, and M. Jenko, Electrochemical and XPS Studies of the Passive Film Formed on Stainless Steels in Borate Buffer and Chloride Solutions, Corros. Sci., 2007, 49, p 2083–2098
25.
C. Zhang, Z.-W. Zhang, and L. Liu, Degradation in Pitting Resistance of 316L Stainless Steel Under Hydrostatic Pressure, Electrochim. Acta, 2016, 210, p 401–406
26.
T. Hanawa, S. Hiromoto, A. Yamamoto, D. Kuroda, and K. Asami, XPS Characterization of the Surface Oxide Film of 316L Stainless Steel Samples that were Located in Quasi-Biological Environments, Mater. Trans., 2002, 43, p 3088–3092
27.
W. Miao, Z. Gao, and W. Hu, Passivity and Pitting Corrosion of 316L in Simulated Concrete Pore Solutions Under Marine Environment, Int. J. Electrochem. Sci., 2018, 13, p 771–784
28.
S. He and D. Jiang, Electrochemical Behavior and Properties of Passive Films on 304 Stainless Steel Under High Temperature and Stress Conditions, Int. J. Electrochem. Sci., 2018, 13, p 5832–5849
29.
H. Luo, H. Su, C. Dong, K. Xiao, and X. Li, Electrochemical and Passivation Behavior Investigation of Ferritic Stainless Steel in Alcaline Environment, Constr. Build. Mater., 2015, 96, p 502–507
30.
S.K. Bonagani, V. Kain, V. Bathula, R.H. Banerlee, and S. Tenneti, Electrochemical Behavior and Passive Property of 13Cr Martensitic Stainless Steel in Nitric Acid Solution, J. Mater. Eng. Perform., 2020, 29, p 215–229
31.
P. Mills and J.L. Sullivan, A Study of the Core Level Electrons in Iron and Its Three Oxides by Means of X-Ray Photoelectron Spectroscopy, J. Phys. D Appl. Phys., 1983, 16, p 723–732
32.
S. Habibzadeh, L. Li, D. Shum-Tim, E.C. Davis, and S. Omanovic, Electrochemical Polishing as a 316L Stainless Steel Surface Treatment Method: Towards the Improvement of Biocompatibility, Corros. Sci., 2014, 87, p 89–100
33.
X. Feng, X. Lu, Y. Zuo, and D. Chen, The Passive Behaviour of 304 Stainless Steels in Saturated Calcium Hydroxide Solution Under Different Deformation, Corros. Sci., 2014, 82, p 347–355
34.
X. Cheng, Z. Feng, C. Li, C. Dong, and X. Li, Investigation of Oxide Film Formation on 316L Stainless Steel in High-Temperature Aqueous Environments, Electrochim. Acta, 2011, 56, p 5860–5865
35.
A. Lasczynska, W. Tylus, J. Winiarski, and I. Szczygiel, Evolution of Corrosion Resistance and Passive Film Properties of Ni-Mo Alloy Coatings During Exposure to 0.5 M NaCl Solution, Surf. Coat. Technol., 2017, 317, p 26–37
36.
X. Ren, K. Sridharan, and T.R. Allen, Corrosion of Ferritic-Martensitic Steel HT9 in Supercritical Water, J. Nuclear Mater., 2006, 358, p 227–234
37.
B. Krawczyk, P. Cook, J. Hobbs, and D.L. Engelberg, Corrosion Behavior of Aqua-Blasted and Laser-Engraved Type 316L Stainless Steel, J. Mater. Eng. Perform., 2017, 26, p 6167–6181
38.
S. Tardio, M.-L. Abel, R.H. Carr, J.E. Castle, and J.F. Watts, Comparative Study of the Native Oxide on 316L Stainless Steel by XPS and ToF-SIMS, J. Vacuum Sci. Technol., 2015, 33, p 05E122-1–05E122-14
39.
J. Xu, C.G. Zhou, and S.Y. Jiang, Investigation on Corrosion Behavior of Sputter Deposited Nanocrystalline (MoxCr1−x)5Si3 Films by Double Cathode Glow Plasma, Intermetallics, 2010, 18, p 1669–1675
40.
X. Liu, X. Wu, and E.H. Han, Effect of Zn Injection on Established Surface Oxide Films on 316L Stainless Steel in Borated and Lithiated High Temperature Water, Corros. Sci., 2012, 65, p 136–144
41.
Z. Duan, F. Arjmand, L. Zhang, and H. Abe, Investigation of the Corrosion Behavior of 304L and 316L Stainless Steels at High-Temperature Borated and Lithiated Water, J. Nuclear Sci. Technol., 2015, 53, p 1435–1446
42.
H. Luo, H. Su, C. Dong, and K. Xiao, Electrochemical and Passivation Behavior Investigation of Ferritic Stainless Steel in Simulated Concrete Pore Media, Data Brief, 2015, 5, p 171–178
43.
R.I. Revilla, B. Wouters, F. Andreatta, A. Lanzutti, L. Fedrizzi, and I. de Graeve, EIS Comparative Study and Critical Equivalent Electrical Circuit (EEC) Analysis of the Native Oxide Layer of Additive Manufactured and Wrought 316L Stainless Steel, Corros. Sci., 2020, 167, p 108480
44.
S. Wang, Y. Hu, K. Fang, W. Zhang, and X. Wang, Effect of Surface Machining on the Corrosion Behaviour of 316 Austenitic Stainless Steel in Simulated PWR Water, Corros. Sci., 2017, 126, p 104–120
45.
C.O.A. Olsson and D. Landolt, Passive Films on Stainless Steels—Chemistry, Structure and Growth, Electrochim. Acta, 2003, 48, p 1093–1104
46.
H. Luo, X. Wang, C. Dong, K. Xiao, and X. Li, Effect of Cold Deformation on the Corrosion Behavior of UNS S31803 Duplex Stainless Steel in Simulated Concrete Pore Solution, Corros. Sci., 2017, 124, p 178–192
47.
L.V. Taveira, M.F. Montemor, D. da Cunha Belo, M.G. Ferreira, and L.F.P. Dick, Influence of Incorporated Mo and Nb on the Mott-Schottky Behaviour of Anodic Films Formed on AISI, 304L, Corros. Sci., 2010, 52, p 2813–2818
48.
D.D. Macdonald, Passivity—The Key to Our Metals-Based Civilization, Pure Appl. Chem., 1999, 71, p 951–978
49.
L. Liu, J. Xu, X. Lu, P.R. Munroe, and Z. Xie, Electrochemical Corrosion Behavior of Nanocrystalline β-Ta Coating for Biomedical Applications, ACS Biomater. Sci. Eng., 2016, 2, p 579–594
50.
K. Shi, Y. Zhang, J. Zhang, and Z. Xie, Electrochemical Properties of Niobium Coating for Biomedical Application, Coatings, 2019, 9, p 546-1–546-15
51.
M.J. Carmezim, A.M. Simões, M.F. Montemor, and M. Da Cunha Belo, Capacitance Behavior of Passive Films on Ferritic and Austenitic Stainless Steel, Corros. Sci., 2005, 47, p 581–591
52.
W. Ye, Y. Li, and F. Wang, The Improvement of the Corrosion Resistance of 309 Stainless Steel in the Transpassive Region by Nano-Crystallization, Electrochim. Acta, 2009, 54, p 1339–1349
53.
Z. Ai, W. Sun, J. Jiang, D. Song, H. Ma, J. Zhang, and D. Wang, Passivation Characteristics of Alloy Corrosion-Resistant Steel Cr10Mo1 in Simulating Concrete Pore Solutions: Combination Effects of pH and Chloride, Materials, 2016, 9, p 749-1–749-17
54.
D.G. Li, J.D. Wang, D.R. Chen, and P. Liang, Molybdenum Addition Enhancing the Corrosion Behaviors of 316 L Stainless Steel in the Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell, Int. J. Hydrogen Energy, 2015, 40, p 5947–5957
55.
J. Lv, Z. Wang, T. Liang, K. Suzuki, and H. Miura, Enhancing the Corrosion Resistance of the 2205 Duplex Stainless Steel Bipolar Plates in PEMFCs Environment by Surface Enriched Molybdenum, Results Phys., 2017, 7, p 3459–3464
56.
V. Vignal, J.M. Olive, and D. Desjardins, Effect of Molybdenum on Passivity of Stainless Steels in Chloride Media Using Ex Situ Near Field Microscopy Observations, Corros. Sci., 1999, 41, p 869–884
57.
A. Kocijan, C. Donik, and M. Jenko, The Corrosion Behaviour of Duplex Stainless Steel in Chloride Solutions Studied by XPS, Mater. Technol., 2009, 43, p 195–199
58.
E. De Vito and P. Marcus, XPS Study of Passive Films Formed on Molybdenum-Implanted Austenitic Stainless Steels, Surf. Int. Anal., 1992, 19, p 403–408
59.
A. Bautista, G. Blanco, F. Velasco, A. Gutiérrez, L. Soriano, F.J. Palomares, and H. Takenout, Changes in the Passive Layer of Corrugated Austenitic Stainless Steel of Low Nickel Content Due to Exposure to Simulated Pore Solutions, Corros. Sci., 2009, 51, p 785–792
60.
M. Liu, X. Cheng, X. Li, Y. Pan, and J. Li, Effect of Cr on the Passive Film Formation Mechanism of Steel Rebar in Saturated Calcium Hydroxide Solution, Appl. Surf. Sci., 2016, 389, p 1182–1191
61.
M. Liu, S. Luo, H. Zhang, and H. Chen, Effect of CO2 and H2S on the Corrosion Resistance of FV520B Steel in Salinity Water, Int. J. Electrochem. Sci., 2019, 14, p 4838–4851
62.
J. Lv and H. Luo, Comparison of Corrosion Properties of Passive Films Formed on Phase Reversion Induced Nano/Ultrafine-Grained 321 Stainless Steel, Appl. Surf. Sci., 2013, 280, p 123–131
63.
S. Ningshen, U.K. Mudali, V.K. Mittal, and H.S. Khatak, Semiconducting and Passive Film Properties of Nitrogen-Containing Type 316LN Stainless Steels, Corros. Sci., 2007, 49, p 481–496
64.
H.X. Guo, B.T. Lu, and J.L. Luo, Study on Passivation and Erosion-Enhanced Corrosion Resistance by Mott-Schottky Analysis, Electrochim. Acta, 2006, 52, p 1108–1116
65.
Z. Feng, X. Cheng, C. Dong, L. Xu, and X. Li, Passivity of 316L Stainless Steel in Borate Buffer Solution Studied by Mott-Schottky Analysis, Atomic Absorption Spectrometry and X-Ray Photoelectron Spectroscopy, Corros. Sci., 2010, 52, p 3646–3653
66.
M.J. Carmezim, A.M. Simões, M.O. Figueiredo, and M. Da Cunha Belo, Electrochemical Behaviour of Thermally Treated Cr-Oxide Films Deposited on Stainless Steel, Corros. Sci., 2002, 44, p 451–465
Metadata
Title
Surface Chemistry and Semiconducting Properties of Passive Film and Corrosion Resistance of Annealed Surgical Stainless Steel
Authors
Rodrigo Kenji de Oliveira
Olandir Vercino Correa
Mara Cristina Lopes de Oliveira
Renato Altobelli Antunes
Publication date
01-09-2020
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 9/2020
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-020-05067-3

Other articles of this Issue 9/2020

Journal of Materials Engineering and Performance 9/2020 Go to the issue

OriginalPaper

Micro/Meso-Scale Equal Channel Angular Pressing of Al 1070 Alloy: Microstructure and Mechanical Properties

OriginalPaper

Rare Earth Element Recovery Using Monoethanolamine

OriginalPaper

Hot Corrosion Performance of Plasma-Sprayed Multiwalled Carbon Nanotube–Al2O3 Composite Coatings in a Coal-Fired Boiler at 900 °C

OriginalPaper

An Investigation on Constitutive Relation and Dynamic Recrystallization of Hastelloy C-276 Alloy During Hot Deformation

OriginalPaper

Study on the Lubrication Mechanism of Titanium Alloys with Surface Dimples Filled with Sn-Ag-Cu and TiC under Dry Sliding Friction

OriginalPaper

Effects of Pre-Deformation and Heat Treatment on the Microstructure and Mechanical Properties of Cu-2.5Be Sheets

Premium Partners

    Image Credits