Top

Journal of Coatings Technology and Research

Published in:

20-10-2016

Synthesis of four-component acrylic-modified water-reducible alkyd resin: investigation of dilution ratio effect on film properties and thermal behaviors

Authors: Özge Naz Büyükyonga, Nagihan Akgün, Işıl Acar, Gamze Güçlü

Published in: Journal of Coatings Technology and Research | Issue 1/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This study investigated the effect of the dilution ratio on film properties of acrylic-modified water-reducible alkyd resins. First, new four-component acrylic-modified alkyd resins based on 1,3-propanediol containing 40% of the equivalent amount of acrylic copolymer to alkyd resin were synthesized using the fatty acid method. The synthesized acrylic-modified alkyd resin was then dissolved in isopropyl alcohol (IPA) at various ratios and further diluted using distilled water at various ratios to obtain by-weight percentages of 70/50, 70/60, and 80/60 of solid content to IPA and water, respectively. Films of the modified alkyd resins were prepared, and cured at 150°C for 1 h, then their physical and chemical surface coating properties and thermal behaviors were investigated. The best results were obtained for the by-weight percentages of 80/60.

previous article Synthesis and characterization of UV-curing epoxy acrylate coatings modified with organically modified rectorite

next article Impact of hybrid self-assembled nanophase particle-based sol–gel coatings on the localized corrosion behavior of modified 9Cr–1Mo steel in chloride medium

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Mo, J, Zhang, Y, Xu, Q, Lamson, JJ, Zhao, R, “Photocatalytic Purification of Volatile Organic Compounds in Indoor Air.” Atmos. Environ., 43 2229–2246 (2009)CrossRef

Liotta, LF, “Catalytic Oxidation of Volatile Organic Compounds on Supported Noble Metals.” Appl. Catal. B: Environ., 100 403–412 (2010)CrossRef

Wang, S, Ang, HM, Tade, MO, “Volatile Organic Compounds in Indoor Environment and Photocatalytic Oxidation: State of the Art.” Environ. Int., 33 694–705 (2007)CrossRef

Guo, H, Lee, SC, Chan, LY, Li, WM, “Risk Assessment of Exposure to Volatile Organic Compounds in Different Indoor Environments.” Environ. Res., 94 57–66 (2004)CrossRef

van Gorkum, R, Bouwman, E, “The Oxidative Drying of Alkyd Paint Catalysed by Metal Complexes.” Coordin. Chem. Rev., 249 1709–1728 (2005)CrossRef

Maroni, M, Seifert, B, Lindvall, T (eds.), Indoor Air Quality—A Comprehensive Reference Book. Elsevier, Amsterdam (1995)

EPA (United States Environmental Protection Agency), “Benzene”, http://www.epa.gov/ttn/atw/hlthef/benzene.html. Accessed 17 Apr 2016.

WHO (World Health Organization), Indoor Air Quality: Organic Pollutants, EURO Reports and Studies No. 111, Copenhagen: World Health Organization, Regional Office for Europe (1989).

Alberici, RM, Jardim, WE, “Photocatalytic Destruction of VOCs in the Gas-Phase Using Titanium Dioxide.” Appl. Catal. B: Environ., 14 55–68 (1997)CrossRef

10.

Wallace, LA, “Comparison of Risks from Outdoor and Indoor Exposure to Toxic Chemicals.” Environ. Health Perspect., 95 7–13 (1991)CrossRef

11.

Srivastava, PK, Pandit, GG, Sharma, S, Mohan Rao, AM, “Volatile Organic Compounds in Indoor Environments in Mumbai, India.” Sci. Total Environ., 255 161–168 (2000)CrossRef

12.

Khan, FI, Kr Ghoshal, A, “Removal of Volatile Organic Compounds from Polluted Air.” J. Loss Prevent. Process Ind., 13 527–545 (2000)CrossRef

13.

Ostberg, G, Bergenstahl, B, Hulden, M, “Influence of Emulsifier on the Formation of Alkyd Emulsions.” Colloid Surf. A: Physicochem. Eng. Asp., 94 161–171 (1995)CrossRef

14.

Guy, A, “The Science and Art of Paint Formulation.” In: Marrion, AR (ed.) The Chemistry and Physics of Coatings, Chap. 11, p. 340. The Royal Society of Chemistry, Cambridge, UK (2004).

15.

Dunk, WAE, “Binders for Water-Borne Coatings.” In: Marrion, AR (ed.) The Chemistry and Physics of Coatings, Chap. 8, p. 340. The Royal Society of Chemistry, Cambridge, UK (2004).

16.

Akbarinezhad, E, Ebrahimi, M, Kassiriha, SM, Khorasani, M, “Synthesis and Evaluation of Water-Reducible Acrylic-Alkyd Resins with High Hydrolytic Stability.” Prog. Org. Coat., 65 217–221 (2009)CrossRef

17.

Jones, FN, “Alkyd Resins.” In: Ullmann’s Encyclopedia of Industrial Chemistry, Vol. 2, p. 430. Wiley, Weinheim (2003)

18.

Oil and Colour Chemists’ Association, Surface Coatings: Raw Materials and Their Usage, Vol. 1. Springer, Berlin (2012)

19.

Athawale, VD, Nimbalkar, RV, “Waterborne Coatings Based on Renewable Oil Resources: an Overview.” J. Am. Oil Chem. Soc., 88 159–185 (2011)CrossRef

20.

Minari, RJ, Goikoetxea, M, Beristain, I, Paulis, M, Barandiaran, MJ, Asua, JM, “Post-polymerization of Waterborne Alkyd/Acrylics. Effect on Polymer Architecture and Particle Morphology.” Polymer, 50 5892–5900 (2009)CrossRef

21.

Nabuurs, T, Baijards, RA, German, AL, “Alkyd-Acrylic Hybrid Systems for Use as Binders in Waterborne Paints.” Prog. Org. Coat., 27 163–172 (1996)CrossRef

22.

Goikoetxea, M, Minari, RJ, Beristain, I, Paulis, M, Barandiaran, MJ, Asua, JM, “Polymerization Kinetics and Microstructure of Waterborne Acrylic/Alkyd Nanocomposites Synthesized by Miniemulsion.” J. Polym. Sci. A: Polym. Chem., 47 4871–4885 (2009)CrossRef

23.

Wang, ST, Schork, FJ, Poehlein, GW, Gooch, JW, “Emulsion and Miniemulsion Copolymerization of Acrylic Monomers in the Presence of Alkyd Resin.” J. Appl. Polym. Sci., 60 2069–2076 (1996)CrossRef

24.

Goikoetxea, M, Minari, RJ, Beristain, I, Paulis, M, Barandiaran, MJ, Asua, JM, “A New Strategy to Improve Alkyd/Acrylic Compatibilization in Waterborne Hybrid Dispersions.” Polymer, 51 5313–5317 (2010)CrossRef

25.

Wang, C, Lin, G, Pae, JH, Jones, FN, Ye, H, Shen, W, “Novel Synthesis of Carboxy-Functional Soybean Acrylic-Alkyd Resins for Water-Reducible Coatings.” J. Coat. Technol., 72 55–61 (2000)CrossRef

26.

Yousefi, AA, Pishvaei, M, Yousefi, A, “Preparation of Water-Based Alkyd/Acrylic Hybrid Resins.” Prog. Color Colourant Coat., 4 15–25 (2011)

27.

Liang, L, Liu, C, Xiao, X, Chen, S, Hu, A, Feng, J, “Optimized Synthesis and Properties of Surfactant-Free Water-Reducible Acrylate-Alkyd Resin Emulsion.” Prog. Org. Coat., 77 1715–1723 (2014)CrossRef

28.

van Hamersveld, EMS, van Es, JJGS, German, AL, Cuperus, FP, Weissenborn, P, Hellgren, A-C, “Oil-Acrylic Hybrid Latexes as Binders for Waterborne Coatings.” Prog. Org. Coat., 35 235–246 (1999)CrossRef

29.

Dziczkowski, J, Soucek, MD, “Factors Influencing the Stability and Film Properties of Acrylic/Alkyd Water-Reducible Hybrid Systems Using a Response Surface Technique.” Prog. Org. Coat., 73 330–343 (2012)CrossRef

30.

Wang, C, Jones, FN, “Stability and Film Properties of Tung Oil Modified Soybean Alkyd Emulsion.” J. Appl. Polym. Sci., 78 1698–1706 (2000)CrossRef

31.

Aigbodion, AI, Okieimen, FE, Obazee, EO, Bakare, IO, “Utilisation of Maleinized Rubber Seed Oil and Its Alkyd Resin as Binders in Water-Borne Coatings.” Prog. Org. Coat., 46 28–31 (2003)CrossRef

32.

Ikhuoria, EU, Aigbodion, AI, Okieimen, FE, “Preparation and Characterisation of Water-Reducible Alkyds with Fumarized Rubber Seed Oil.” Prog. Org. Coat., 52 238–240 (2005)CrossRef

33.

Acar, I, Güçlü, G, Scholarship students: Akgün, N, Büyükyonga, ÖN, “Water Reducible Acrylic Modified Alkyd Resin Production from Waste PET Bottle Glycolysis Intermediates”, TUBITAK (The Scientific and Technological Research Council of Turkey), Project Number 214M660, April 2015–April 2017.

34.

Akgün, N, Büyükyonga, ÖN, Acar, I, Güçlü, G, “Synthesis of Novel Acrylic Modified Water Reducible Alkyd Resin: Investigation of Acrylic Copolymer Ratio Effect on Film Properties and Thermal Behaviors.” Polym. Eng. Sci., (2015). doi:10.1002/pen.24324

35.

Lucchesi, CA, Secrest, PJ, Hirn, CF, “Industrial and Natural Products and Non-instrumental Methods.” In: Welcher, FJ (ed.) Standard Methods of Chemical Analysis, Part B, Chap. 37, Vol. 2, p. 1653. Robert E. Krieger Pub. Co., Huntington, New York (1975).

36.

Patton, TC, Alkyd Resin Technology. Wiley, New York (1962)

37.

Pierson, RH, “Industrial and Natural Products and Non-instrumental Methods.” In: Welcher, FJ (ed.) Standard Methods of Chemical Analysis, Part B, Chap. 32, Vol. 2, p. 1338. Robert E. Krieger Pub. Co., Huntington, New York (1975).

38.

Sward, GG, “Paint Testing Manual”, ASTM Special Technical Publication 500, 13th ed. American Society for Testing and Materials, Philadelphia (1972)

39.

Acar, I, Orbay, M, “Aminoglycolysis of Waste Poly(ethylene terephthalate) with Diethanolamine and Evaluation of the Products as Polyurethane Surface Coating Materials.” Polym. Eng. Sci., 51 746–754 (2011)CrossRef

40.

Bal, A, Acar, I, Güçlü, G, “A Novel Type Nanocomposite Coating Based on Alkyd-Melamine Formaldehyde Resin Containing Modified Silica: Preparation and Film Properties.” J. Appl. Polym. Sci., 125 E85–E92 (2012)CrossRef

41.

Patel, HS, Patel, BK, Patel, KB, Desai, SN, “Surface Coating Studies of Alkyd-Castor Oil-Epoxy Resin Condensate-Ketone Resin Blends.” Int. J. Polym. Mater., 59 25–32 (2010)CrossRef

42.

Bulak, E, Acar, I, “The Use of Aminolysis, Aminoglycolysis, and Simultaneous Aminolysis-Hydrolysis Products of Waste PET for Production of Paint Binder.” Polym. Eng. Sci., 54 2272–2281 (2014)CrossRef

43.

Tahmaz, M, Acar, I, Güçlü, G, “Synthesis and Film Properties of Long Oil Alkyd Resin/Organo Clay Nanocomposite Coatings.” Res. Chem. Intermed., 41 27–42 (2015)CrossRef

44.

Mizutani, T, Arai, K, Miyamoto, M, Kimura, Y, “Application of Silica-Containing Nano-Composite Emulsion to Wall Paint: A New Environmentally Safe Paint of High Performance.” Prog. Org. Coat., 55 276–283 (2006)CrossRef

45.

Silverstein, RM, Bassler, GC, Spectrometric Identification of Organic Compounds. Wiley, New York (1966)

46.

Koleske, JV, Paint and Coating Testing Manual, Fourteenth Edition of the Gardner-Sward Handbook. ASTM International, Ann Arbor (1995)CrossRef

47.

Saravari, O, Phapant, P, Pimpan, V, “Synthesis of Water-Reducible Acrylic-Alkyd Resins Based on Modified Palm Oil.” J. Appl. Polym. Sci., 96 1170–1175 (2005)CrossRef

48.

Güçlü, G, “Alkyd Resins Based on Waste PET for Water-Reducible Coating Applications.” Polym. Bull., 64 739–748 (2010)CrossRef

49.

Kurt, İ, Acar, I, Güçlü, G, “Preparation and Characterization of Water Reducible Alkyd Resin/Colloidal Silica Nanocomposite Coatings.” Prog. Org. Coat., 77 949–956 (2014)CrossRef

50.

Acar, I, Bal, A, Güçlü, G, “The Use of Intermediates Obtained from Aminoglycolysis of Waste PET for Synthesis of Water-Reducible Alkyd Resin.” Can. J. Chem., 91 357–363 (2013)CrossRef

51.

Muizebelt, WJ, Hubert, JC, Nielen, MWF, Klaasen, RP, Zabel, KH, “Crosslink Mechanisms of High-Solids Alkyd Resins in the Presence of Reactive Diluents.” Prog. Org. Coat., 40 121–130 (2000)CrossRef

52.

Bieleman, J, “Cobalt-Carboxylate Driers for Paints,” Cobalt News, 04/1, pp. 7–9, The Cobalt Development Institute, U.K. (2004).

53.

Bieleman, J, Additives for Coatings. Wiley-VCH, Weinheim (2000)CrossRef

54.

Soucek, MD, Khattab, T, Wu, J, “Review of Autoxidation and Dryers.” Prog. Org. Coat., 73 (4) 435–454 (2012)CrossRef

Title: Synthesis of four-component acrylic-modified water-reducible alkyd resin: investigation of dilution ratio effect on film properties and thermal behaviors
Authors: Özge Naz Büyükyonga
Nagihan Akgün
Işıl Acar
Gamze Güçlü
Publication date: 20-10-2016
Publisher: Springer US
Published in: Journal of Coatings Technology and Research / Issue 1/2017
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI: https://doi.org/10.1007/s11998-016-9835-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2017

Combined ‘spear and shield’: superhydrophilic antimicrobial and antifouling mesh membrane for efficient oil–water separation through facile and environmentally friendly strategy

The effects of tannins on adhesion strength and surface roughness of varnished wood after accelerated weathering

Synthesis and characterization of UV-curing epoxy acrylate coatings modified with organically modified rectorite

Syneresis and rheology mechanisms of a latex-HEUR associative thickener system

Effect of heterogeneity on hydro/ice-phobic properties of alkylsilane/fluoro-alkylsilane-based coatings on Al substrates

Synthesis of fluorinated polycarbonate-based polyurethane acrylate for UV-curable coatings

Premium Partners