Top

Published in:

2021 | OriginalPaper | Chapter

18. System Simulation in Automotive Industry

Authors : Oliver Knaus, Johann C. Wurzenberger

Published in: Systems Engineering for Automotive Powertrain Development

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

System simulation is a part of the overall field of systems engineering and provides quantitative results to verify and validate the architecture and parameters of a system under development. In the meantime, system simulation is a well-established activity in the automotive development area and covers a broad range of applications over the whole development process from system architecture definition, component dimensioning up to virtual testing and calibration. In all of these steps, simulation helps the systems engineer find the best choice of system architectures, evaluate the component target characteristics, define the control logic and parameters, and support the individual tests. Thanks to system simulation, proper system function can be confirmed in early phases of development, which minimizes the number of cost-intensive development loops. In addition, verification and validation and calibration tasks can be frontloaded to reduce overall development time. This chapter focuses on the setup of different physical domain models and how they are linked together. The modeling approaches of the individual domains and simulation management are discussed.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Integrated and Open Development Platform for the Automotive Industry

next chapter Cost Engineering as an Essential Part of Systems Engineering

AVL CRUISE M (2019) Multi-disciplinary system simulation. https://www.avl.com/web/guest/-/avl-cruise-2. Online accessed 14 Mar 2019

Banjac T, Wurzenberger JC, Katrasnik T (2014) Assessment of engine thermal management through advanced system engineering modeling. Adv Eng Softw 71:19–33CrossRef

Depcik C, Assanis D (2008) Simulating area conservation and the gas-wall interface for one-dimensional based diesel particulate filter models. J Eng Gas Turbines Power 130(6). https://doi.org/10.1115/1.2939002

He Y, Lin C-C (2007) Development and validation of a mean value engine model for integrated engine and control system simulation. SAE technical papers. https://doi.org/10.4271/2007-01-1304

Heinzle R (2009) Machine learning methods and their application to real-time engine simulation. Johannes-Kepler-Universität Linz

Hendricks E, Chevalier A Jensen M, Sorenson SC, Trumpy D, Asik J (1996) Modelling of the intake manifold filling dynamics. SAE technical papers. https://doi.org/10.4271/960037

Höpfner A, Abart M, Koops I, Przymusinski A, Roduner CA, Strasser R, Valero-Bertrand D (2013) New approach for ECS software development. CIMAC, paper no. 193, Shanghai

Hrauda G, Strasser R, Aschaber M (2010) Gas exchange simulation from concept to start of production – AVL’s tool chain in the engine development process. Conference on rhermo- and fluid-dynamic processes in diesel engines, Valencia

Jones S, Huss A, Kural E, Massoner A, Morra E, Simon C, Tatschl R, Vock C (2014) Development of predictive vehicle & drivetrain operating strategies based upon advanced information & communication technologies. Transport Research Arena, Paris

Kastler H, Wagner G, Hasenbichler G, Huss A, Ofner H, Schreier H, Theissl H (2015) Mild hybrid systems for long haul truck applications. VDI-Berichte 2247:47–57

Katrasnik T, Wurzenberger JC, Schuemi H (2013) On convergence, stability and computational speed of numerical schemes for 0-D IC engine cylinder modeling. J Mech Eng 59(4):223–236. https://doi.org/10.5545/sv-jme.2012.668CrossRef

Konstandopoulos A, Kostoglou M, Skaperdas E, Papaioannou E, Zarvalis D, Kladopoulou E (2000) Fundamental studies of diesel particulate filters: transient loading, regeneration and aging. SAE technical paper. https://doi.org/10.4271/2000-01-1016

Paciti GC, Amphlett S, Miller P, Norris R, Truscott A (2008) Real-time crank-resolved engine simulation for testing new engine management systems. SAE technical paper. https://doi.org/10.4271/2008-01-1006

Pfau RU, Schaden T (2011) Real-time simulation of extended vehicle drive train dynamics. In: Multibody dynamics – computational methods in applied sciences. https://doi.org/10.1007/978-90-481-9971-6_10

Pischinger S, Schernus C, Lütkenmeyer G, Theuerkauf HJ, Winsel T., Ayeb M (2004) Investigation of predictive models for application in engine cold start behavior. SAE technical paper. https://doi.org/10.4271/2004-01-0994

Pötsch C (2014) Crank-angle resolved modeling of fuel injection and mixing controlled combustion for real-time application in steady-state and transient operation. SAE technical paper. https://doi.org/10.4271/2014-01-1095

Pötsch C, Katrasnik T (2015) Crank-angle resolved modeling of fuel injection, combustion and emission formation for engine optimization and calibration on real-time systems. SAE technical paper. https://doi.org/10.4271/2016-01-0558

Pötsch Ch, Ofner H (2011) Assessment of a multi-zone combustion model for analysis and prediction of CI engine combustion and emissions. SAE technical paper. https://doi.org/10.4271/2011-01-1439

Pötsch C, Schuemie H, Ofner H, Tatschl R (2013) A computational study on the impact of cycle-to-cycle combustion fluctuations on fuel consumption and knock in steady-state and drive cycle operation. SAE technical paper. https://doi.org/10.4271/2013-24-0030

Strasser R, Wurzenberger JC, Roduner CA (2013) Innovative physikalische Echtzeitmodellierung: Durchgängige ECU-Entwicklung und Kalibration von der Projektidee bis hin zum Produktionsbeginn. 15. MTZ-Fachtagung VPC – Virtual Powertrain Creation, Mainz

Tatschl R, Pötsch C, Priesching P, Schuemie H, Vitek O, Macek J (2014) A scalable simulation methodology for assessment of SI-engine performance and fuel consumption on component, sub-system and system level, Transport Research Arena, Paris

Vitek O, Macek J, Pötsch C, Tatschl R (2013) Modeling cycle-to-cycle variations in 0D/1D simulation by means of combustion model parameter perturbations based on statistics of cycle-resolved data. SAE technical paper. https://doi.org/10.4271/2013-01-1314

Wanker R, Wurzenberger JC, Schuemie H (2008) Three-way catalyst light-off during the NEDC test cycle: fully coupled 0D/1D simulation of gasoline combustion, pollutant formation and after treatment systems. SAE technical paper. https://doi.org/10.4271/2008-01-1755

Wurzenberger JC, Bartsch P, Katrasnik T (2010) Crank-angle resolved real-time capable engine and vehicle simulation – fuel consumption and driving performance. SAE technical paper. https://doi.org/10.4271/2010-01-0784

Wurzenberger JC, Bardubitzki S, Bartsch P, Katrasnik T (2011) Realtime capable pollutant formation and exhaust after treatment modeling – HSDI diesel engine simulation. SAE technical paper. https://doi.org/10.4271/2011-01-1438

Wurzenberger JC, Prah I, Tominc P, Katrasnik T (2012a) Optimization of hybrid powertrains – physical based modeling for concept design. SAE technical paper. https://doi.org/10.4271/2012-01-0359

Wurzenberger JC, Heinzle R, Banjac T, Katrasnik T (2012b) Fahrzeug Wärmemanagement Simulation unter Verwendung von mechanistischen System-Simulationsmodellen. 16. VDI Kongress SIMVEC 2012, Baden-Baden

Wurzenberger JC, Bardubitzki S, Kutschi S, Fairbrother R, Pötsch C (2016a) Modeling of catalyzed particulate filters – concept phase simulation and real-time plant modeling on HiL. SAE Int J Engines 9(3):1720–1734. https://doi.org/10.4271/2016-01-0969CrossRef

Wurzenberger JC, Pötsch C, Kutschi S, Fairbrother R, Bardubitzki S, Wanker R (2016b) Real-driving-emissions – an integrated on-road testing and office/hardware-in-the-loop development approach. 18. VDI Kongress SIMVEC 2016, Baden-Baden

Zahn S, Isermann R (2008) Development of a crank-angle based engine model for realtime simulation. Engine process simulation and supercharging II, Haus der Technik, pp 255–279, Aachen

Title: System Simulation in Automotive Industry
Authors: Oliver Knaus
Johann C. Wurzenberger
Publisher: Springer International Publishing
Book: Systems Engineering for Automotive Powertrain Development
Print ISBN: 978-3-319-99628-8

Electronic ISBN: 978-3-319-99629-5

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-3-319-99629-5_34

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partner