Top

Journal of Materials Engineering and Performance

Published in:

01-08-2014

Tensile Behavior of T91 Steel Over a Wide Range of Temperatures and Strain-Rate Up To 10⁴ s⁻¹

Authors: M. Scapin, L. Peroni, C. Fichera, A. Cambriani

Published in: Journal of Materials Engineering and Performance | Issue 8/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

High chromium ferritic/martensitic steel T91 (9% Cr, 1% Mo), on account of its radiation resistance, is a candidate material for nuclear reactor applications. Its joining by an impact method to create a cold joint is tested in the realm of scoping tests toward the safe operation of nuclear fuels, encapsulated in representative T91 materials. Hitherto, T91 mechanical characterization at high strain rates is relatively unknown, particularly, in relation to impact joining and also to nuclear accidents. In this study, the mechanical characterization of T91 steel was performed in tension by varying the strain-rate (10⁻³ up to 10⁴ s⁻¹) and temperature (20-800°C) on dog-bone specimens, using standard testing machines or Hopkinson Bar apparati. As expected, the material is both temperature and strain-rate sensitive and different sets of parameters for the Johnson-Cook strength model were extracted via a numerical inverse procedure, in order to obtain the most suitable set to be used in this field of applications.

previous article Effect of Silicon on Mechanical and Wear Properties of Aluminium-Alloyed Gray Cast Iron

next article Low Cycle Fatigue Behavior of HT250 Gray Cast Iron for Engine Cylinder Blocks

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

W. Wang, M. Li, C. He, X. Wei, D. Wang, and H. Du, Experimental Study on High Strain Rate Behavior of High Strength 600–1000 MPa Dual Phase Steels and 1200 MPa Fully Martensitic Steels, Mater. Des., 2013, 47, p 510–521. doi:10.1016/j.matdes.2012.12.068 CrossRef

A.K. Paul, A. Raj, P. Biswas, G. Manikandan, and R.K. Verma, Tensile Flow Behavior of Ultra Low Carbon, Low Carbon and Micro Alloyed Steel Sheets for Auto Application Under Low to Intermediate Strain Rate, Mater. Des., 2014, 57, p 211–217. doi:10.1016/j.matdes.2013.12.047 CrossRef

F. Feng, S. Huang, Z. Meng, J. Hu, Y. Lei, M. Zhou, D. Wu, and Z. Yang, Experimental Study on Tensile Property of AZ31B Magnesium Alloy at Different High Strain Rates and Temperatures, Mater. Des., 2014, 57, p 10–20. doi:10.1016/j.matdes.2013.12.031 CrossRef

D. Samantaray, A. Patel, U. Borah, S.K. Albert, and A.K. Bhaduri, Constitutive Flow Behavior of IFAC-1 Austenitic Stainless Steel Depicting Strain Saturation Over a Wide Range of Strain Rates and Temperatures, Mater. Des., 2014, 56, p 565–571. doi:10.1016/j.matdes.2013.11.053 CrossRef

E. Cadoni, M. Dotta, D. Forni, and P. Spätig, Strain-Rate Behavior in Tension of the Tempered Martensitic Reduced Activation Steel Eurofer97, J. Nucl. Mater, 2011, 414(3), p 360–366. doi:10.1016/j.jnucmat.2011.05.002 CrossRef

G. Solomos, C. Albertini, K. Labibes, V. Pizzinato, and B. Viaccoz, Strain rate Effects in Nuclear Steels at Room and Higher Temperatures, Nucl. Eng. Des., 2004, 229(2–3), p 139–149. doi:10.1016/j.nucengdes.2003.10.006 CrossRef

A.K. Dureja, S.K. Sinha, D.N. Pawaskar, P. Seshu, J.K. Chakravartty, and R.K. Sinha, Modelling Flow and Work Hardening Behaviour of Cold Worked Zr-2.5Nb Pressure Tube Material in the Temperature Range of 30–600°C, Nucl. Eng. Des., 2013, doi:10.1016/j.nucengdes.2013.08.006

P. Spatig, R. Bonadé, G.R. Odette, J.W. Rensman, E.N. Campitelli, and P. Mueller, Plastic Flow Properties and Fracture Toughness Characterization of Unirradiated and Irradiated Tempered Martensitic Steels, J. Nucl. Mater., 2007, 367–370, p 527–538. doi:10.1016/j.jnucmat.2007.03.038 CrossRef

M. Scapin, L. Peroni, and M. Peroni, Parameters Identification in Strain-Rate and Thermal Sensitive Visco-plastic Material Model for an Alumina Dispersion Strengthened Copper, Int. J. Impact Eng., 2012, 40–41, p 58–67. doi:10.1016/j.ijimpeng.2011.10.002 CrossRef

10.

G.P. Skoro, J.R.J. Bennett, T.R. Edgecock, and C.N. Booth, Yield Strength of Molybdenum, Tantalum and Tungsten at High Strain Rates and Very High Temperatures, J. Nucl. Mater., 2012, 426(1–3), p 45–51. doi:10.1016/j.jnucmat.2012.03.044 CrossRef

11.

W.-S. Lee, C.-F. Lin, T.-H. Chen, and W.-Z. Luo, High Temperature Deformation and Fracture Behaviour of 316L Stainless Steel Under High Strain Rate Loading, J. Nucl. Mater., 2012, 420(1–3), p 226–234. doi:10.1016/j.jnucmat.2011.10.005 CrossRef

12.

R.L. Klueh and A.T. Nelson, Ferritic/Martensitic Steels For Next-Generation Reactors, J. Nucl. Mater., 2007, 371, p 37–52CrossRef

13.

C. Fazio et al., European Cross-Cutting Research on Structural Materials for Generation IV and Transmutation Systems, J. Nucl. Mater., 2009, 392, p 316–323CrossRef

14.

Y. Zhang et al., Application of High Velocity Impact Welding at Varied Different Length Scales, J. Mater. Process. Technol., 2011, 211(5), p 944–952CrossRef

15.

V. Psyk et al., Electromagnetic Forming: A review, J. Mater. Process. Technol., 2011, 211, p 787–829CrossRef

16.

T. Malmberg, Dynamic Plastic Behaviour of Metals, Kernforschung Zentrum Karlsruhe, Report No. KFK 2023, September 1974

17.

G.R. Johnson and W.A. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures, 7th International Symposium on Ballistics, 1983, 541–547

18.

H. Zhao, A Constitutive Model for Metals Over a Large Range of Strain Rates Identification for Mild-Steel and Aluminium Sheets, Mater. Sci. Eng. A, 1997, 230, p 95–97CrossRef

19.

M. Sasso, G. Newaz, and D. Amodio, Material Characterization at High Strain Rate by Hopkinson Bar Tests and Finite Element Optimization, Mater. Sci. Eng. A, 2008, 487, p 289–300CrossRef

20.

M. Sedighi, M. Khandaei, and H. Shokrollahi, An Approach in Parametric Identification of High Strain Rate Constitutive Model Using Hopkinson Pressure Bar Test Results, Mater. Sci. Eng. A, 2010, 527, p 3521–3528CrossRef

21.

A.S. Milani, W. Daboussi, J.A. Nemes, and R.C. Abeyaratne, An Improved Multi-objective Identification of Johnson-Cook Material Parameters, Int. J. Impact Eng., 2009, 36, p 294–302CrossRef

22.

B. Langrand, P. Geoffroy, J.-L. Petitniot, J. Fabis, E. Markiewicz, and P. drazetic, Identification Technique of Constitutive Model Parameters for Crashworthiness Modeling, Aerosp. Sci. Technol., 1999, 4, p 215–227CrossRef

23.

J. Peirs, P. Verleysen, W. Van Paepegem, and J. Degrieck, Determining the Stress-Strain Behaviour at Large Strains from High Strain Rate Tensile and Shear Experiments, J. Impact Eng., 2011, 38, p 406–415. doi:10.1016/j.ijimpeng.2011.01.004 CrossRef

24.

B. Gladman, LS-DYNA Keywords User’s Manual, Version 971, Vol. 1, 2007, Livermore Software Technology Corporation (LSTC)

25.

N. Stander, W. Roux, T. Goel, T. Eggleston, and K. Craig, LS-OPT User’s Manual: A Design Optimization and Probabilistic Analysis Tool for the Engineering Analyst, Version 4.0, 2009, Livermore Software Technology Corporation (LSTC)

26.

T. Børvik, O.S. Hopperstad, S. dey, E.V. Pizzinato, M. Langseth, and C. Albertini, Strength and Ductility of Weldox 460 E Steel at High Strain Rates, Elevated Temperatures and Various Stress Triaxialities, Eng. Fract. Mech., 2005, 72, p 1071–1087. doi:10.1016/j.engfracmech.2004.07.007 CrossRef

27.

A.H. Clausen, T. Børvik, O.S. Hopperstad, and A. Benallal, Flow and Fracture Characteristics of Aluminium Alloy AA5083-H116 as Function of Strain Rate, Temperature and Triaxiality, Mater. Sci. Eng. A, 2004, 364(1–2), p 260–272. doi:10.1016/j.msea.2003.08.027 CrossRef

28.

D. Jia and K.T. Ramesh, A Rigorous Assessment of the Benefits of Miniaturization in the Kolsky Bar System, Exp. Mech., 2004, 44, p 445–454. doi:10.1177/0014485104047608 CrossRef

29.

W. Cheng and B. Song, Split Hopkinson (Kolsky) Bar: Design, Testing and Applications, Mechanical Engineering Series Springer, New York, 2011, ISBN 978-1-4419-7981-0CrossRef

30.

M. Borsutzki et al., Recommendations for Dynamic Tensile Testing of Sheet Steels, 2005, International Iron and Steel Institute

31.

T. Goel and N. Stander, Multi-Objective Optimization using LS-OPT, 2007, LS-DYNA Conference

32.

S. Bandyopadhyay and S. Saha, Unsupervised Classification, 2013. doi: 10.1007/978-3-642-32451-2_2

Title: Tensile Behavior of T91 Steel Over a Wide Range of Temperatures and Strain-Rate Up To 104 s−1
Authors: M. Scapin
L. Peroni
C. Fichera
A. Cambriani
Publication date: 01-08-2014
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 8/2014
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-014-1081-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2014

Low Cycle Fatigue Behavior of HT250 Gray Cast Iron for Engine Cylinder Blocks

Improvements in Mechanical Properties of 319 Al Alloy Engine Blocks Through Cost-Effective Solution Heat Treatment

Synthesis of Porous Silicon Nitride-Boron Nitride Composites by Gel-Casting and PIP

Investigations of High Temperature Wear Mechanisms for Tool Steel Under Open-Sliding Contact

A Preliminary Study of Deformation Behavior of Friction Stir Welded Ti-6Al-4V

Numerical Investigation of Process Parameters on External Inversion of Thin-Walled Tubes

Premium Partners