Top

Published in:

2018 | OriginalPaper | Chapter

Tests of a Steam Piston Engine Under Supercritical Conditions

Authors : Janusz Wełnowski, Damian Wełnowski, Tomasz Topoliński, Józef Flizikowski, Adam Mroziński

Published in: Renewable Energy Sources: Engineering, Technology, Innovation

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The purpose of the tests is smart growth of a micro combined heat and power plant, intended to be fed with biogas, biomass or any other type of fuel (an aspect to be taken into account in the developmental stage of a prototype) with an impulse piston steam engine, power generator or a water brake (modelling, simulating, substituting workloads). The research system included the following units: an inductive supercritical steam generator (eventually replaced with a steam boiler fed with biogas, biomass or any other solid or liquid fuel), a piston steam engine fed with steam of supercritical parameters with a patented steam-supply system including an impulse injection valve, a power generator (interchangeably with water brake), a steam generation system.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Study the Physical Properties of the Fruit Pomace for Energy Use

next chapter The Visualization of Combustion Air Flow that Flows into the Dendromass Combustion Process Using CFD Simulations

Dowkontt, J.: Teoria silników cieplnych. WKiŁ, Warszawa (1973)

Zagórski, J.: Zarys techniki cieplnej. WNT, Warszawa (1971)

Ochęduszko, S.: Termodynamika stosowana. WNT, Warszawa (1970)

Szargut, J.: Termodynamika techniczna. PWN, Warszawa (1991)

Staniszewski, B.: Termodynamika. PWN, Warszawa (1982)

Knizia, K.: Die thermodynamik des Dampkraftprozesses. Springer Verlag, Berlin (2010)

Golec, T., Rakowski, J., Świrski, J.: Perspektywy postępu technicznego w wytwarzaniu energii elektrycznej przy wykorzystaniu węgla kamiennego, węgla brunatnego oraz gazu ziemnego z uwzględnieniem efektu środowiskowego. Instytut Energetyki, Warszawa (2003)

Li, X., Kininmont, D., Le Pierres, R., Dewson, S.J.: Alloy 617 for the high temperature diffusion—bonded compact heat exchangers. Proceedings of ICAPP 2008, Anaheim, CA USA, June 8–12 (2008)

Flizikowski, J., Mroziński, A., Tomporowski, A.: Active monitoring as cognitive control of grinders design. AIP Conf. Proc. 1822, 020006 (2017)CrossRef

10.

Flizikowski, J, Topoliński, T, Opielak, M, Tomporowski, A, Mroziński, A.: Research and analysis of operating characteristics of energetic biomass micronizer. Eksploatacja i Niezawodność—Maintenance and Reliability, vol. 17, no 1, str. 19–26 (2015)

11.

Rataj, Z.L., Walewski, A.W., Wojnar, W.B.: Badania oraz wariantowa analiza techniczna rozwiązań koncepcyjnych kotłów pyłowych na parametry nadkrytyczne z paleniskiem niskoemisyjnym—wybór technologii odsiarczania i odazotowania spalin, oraz utylizacji odpadów paleniskowych. Politechnika Śląska, IMUE, Gliwice (1998)

12.

Kotlicki, T., Pawlik, M.: Innowacyjne technologie węglowe dla ograniczenia emisji CO₂. Rynek Energii nr 3 (2011)

13.

Kacejko, P.: Inżynieria elektryczna i informatyczna w nowych technologiach elektroenergetycznych. Nowoczesna Edukacja, Lublin (2011)

14.

Skorek, J., Kalina, J.: Gazowe układy kogeneracyjne. WNT, Warszawa (2005)

15.

Piętak, A.: Studium możliwości wykorzystania silników o obiegu Stirlinga do kogeneracyjnych agregatów zasilanych biopaliwami. IMP PAN, tom 33 Gdańsk (2013)

16.

Fu, J., Liu, J., Ren, C., Wang, L., Deng, B., Xu, Z.: An open steam power cycle used for IC engine exhaust gas energy recovery. Energy 44, 544–554 (2012)CrossRef

17.

Fu, J., Liu, J., Ren, C., Xu, Z., Ren, C., Deng, B.: A combined thermodynamic cycle based on methanol dissociation for IC (internal combustion) engine exhaust heat recovery. Energy 55, 778–786 (2013)CrossRef

18.

Ayhan, V.: Theoretical and experimental investigation of diesel engine with steam injection system on performance and emission parameters. Appl. Therm. Eng. 54, 161–170 (2013)CrossRef

19.

Hassan, M.H.: Technologies to recover exhaust heat from internal combustion engines. Renew. Sustain. Energy Rev. 16, 5649–559 (2012)CrossRef

20.

Parlak, A.: Investigation of the effects of steam injection on performance and emissions of a diesel engine fuelled with tobacco seed oil methyl ester. Fuel Process. Technol. 116, 101–109 (2013)CrossRef

21.

Wang, T., Zhang, Y., Shu, C.: A review of researches on thermal exhaust heat recovery with Rankine cycle. Renew. Sustain. Energy Rev. 15, 2862–2871 (2011)CrossRef

22.

Franco, A., Diaz, A.R.: The future challenges for clean coal technologies: joining efficiency increase and pollutant emission control. Energy 34, 348–354 (2008)CrossRef

23.

Garcia, R.F.: Efficiency enhancement of combined cycles by suitable working fluids and operating conditions. Appl. Therm. Eng. 42, 25–33 (2012)CrossRef

24.

Wenzhi, G., Junmeng, Z., Guanghua, B., Liming, F.: Performance evaluation and experiment system for waste heat recovery of diesel engine. Energy 55, 226–235 (2013)CrossRef

25.

Vaja, I., Gambarotta, A.: Internal Combustion Engine (ICE) bottoming with Organic Rankine Cycles (ORCs). Energy 35, 1084–1093 (2010)CrossRef

26.

Schuster, A., Karellas, S., Aumann, R.: Efficiency optimization potential in supercritical Organic Rankine Cycles. Energy 35, 1033–1039 (2010)CrossRef

27.

Lewandowski, M.: Proekologiczne źródła energii odnawialnej. WNT, Warszawa (2002)

28.

Pikoń, K., Stelmach, S.: Współczesne problemy energetyki. Archiwum Gospodarki Odpadami i Ochrony Środowiska, Gliwice (2013)

29.

30.

Chochowski, A.: Energia. Difin, pp. 86–87 (2012)

31.

Wiser, W.H.: Energy Resources. Springer-Verlag, New York (2000)CrossRef

32.

Paska, J.: Wytwarzanie energii elektrycznej. Oficyna Wydawnicza PW, Warszawa (2005)

33.

Zandian, A., Ashjaee, M.: The thermal efficiency improvement of a steam Rankine cycle by innovative design of a hybrid cooling tower and a solar chimney concept. Renew. Energy 51, 465–473 (2013)

34.

Shipley, A., Hampson, A., Hedman, B., Garland, P., Bautista, P.: Combined heat and power effective energy solutions for a sustainable future. Elsevier, Energy Efficiency and Renewable Energy (2008)

35.

San Martín, J.I., Zamora, I., San Martín, J.J., Aperribay, V., Eguía, P.: Trigeneration Systems with Fuel Cells. Power 40, 65–85 (2008)

36.

Babus’Haq, R.F., Pearson, J.P., Probert, S.D., O’Callaghan, P.W.: Economics of mini-combined heat-and-power packages for use in hotels. Heat Recovery Syst. CHP 10(3), 269–75 (1990)

37.

Evans, R.D.: Environmental and economic implications of small-scale CHP. Energy Policy 21, 79–91 (1990)

38.

Orchard, W.: CHP demonstration scheme reduces CO2 emissions by 73 percent. Energy Manag. 20–21 (1990)

39.

Badr, O., Naik, S., O’Callaghan, P.W., Probert, S.D.: Expansion machine for a low power-output steam Rankine-Cycle Engine. Appl. Energy 39, 93–116 (1991)

40.

Badr, O., O’Callaghan, P.W., Hussein, M., Probert, S.D.: Multi-vane expanders as prime movers for low-grade energy organic Rankine-cycle engines. Appl. Energy 16(2), 129–146 (1984)

41.

Bahadori, M.N.: Solar water-pumping. Solar Energy 21(4), 307–316 (1978)

42.

Suri, R., Chandra, S., Kreshinamorthy, M.V., Srinivasamurthy, S., Berndorfer, K., Hopmann, H., Wolf, D.: Development of small power-plants in rural areas in India. Proc. ISES Congress, pp. 1722–1727 (1978), New Delhi

43.

Lorenz, J., Fuestel, J., Kraft, M.: New developments for future solar-power plants. In: Proceedings of International Syrup: Workshop on Solar Energy, pp. 1318–1328, Cairo (1978)

44.

O’Callaghan, P.W., Wood, R.J., Bell, M.A., Hussein, M., Patel, R.M., Buick, T.R., Probert S.D.: Optimization of a multi-vane expander as the prime mover in an organic Rankine cycle. Final report of Contract No. EEB/1/121/80/UK/H, Commission of European Communities (1983)

45.

O’Callaghan, P.W., Bell, M.A., Wood, R.J.: The development of heat-engine driven heat-pumps. Final Report of Contract No. GR/B/75334, SERC, UK (1984)

46.

O’Neill, P.: Development of the screw compressor and its application in the petrochemical and related industries. In: Proceedings of the Fluid Machinery for the Oil, Petrochemical and Related Industries Conference Paper, No. C48/81, 24–26 March 1981, The Hague, Netherlands. Mechanical Engineering Publications, London, pp. 1–13 (1981)

47.

Badr, O., Naik, S., O’Callaghan, P.W., Probert, S.D.: Wankel engines as steam expanders: design considerations. Appl. Energy 40, 157–170 (1991)CrossRef

48.

Badr, O., Naik, S., O’Callaghan, P.W., Probert, S.D.: Rotary Wankel engines as expansion devices in steam Rankine-cycle engines. Appl. Energy 39(1), 59–76 (1991)CrossRef

49.

Antonelli, M., Martorano, L.: A study on the rotary steam engine for distributed generation in small size power plants. Appl. Energy 97, 642–647 (2012)

50.

http://www.asiapacificpartnership.org/pdf/PGTTF/events-october-06/24%20-%20New%20Gen%20Strategy%20Ultra-Supercritical%20Technlgy.pdf

Title: Tests of a Steam Piston Engine Under Supercritical Conditions
Authors: Janusz Wełnowski
Damian Wełnowski
Tomasz Topoliński
Józef Flizikowski
Adam Mroziński
Publisher: Springer International Publishing
Book: Renewable Energy Sources: Engineering, Technology, Innovation
Print ISBN: 978-3-319-72370-9

Electronic ISBN: 978-3-319-72371-6

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-319-72371-6_2