Top

Journal of Materials Engineering and Performance

Published in:

24-10-2016

The Correlation Between the Percussive Sound and the Residual Stress/Strain Distributions in a Cymbal

Authors: Kozo Osamura, Fumiyasu Kuratani, Toshio Koide, Wataru Ogawa, Hiroyasu Taniguchi, Yoshiyuki Monju, Taiji Mizuta, Takahisa Shobu

Published in: Journal of Materials Engineering and Performance | Issue 12/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The artistic sound of a cymbal is produced by employing a special copper alloy as well as incorporating complicated and heterogeneous residual stress/strain distributions. In order to establish a modern engineering process that achieves high-quality control for the cymbals, it is necessary to investigate the distribution of the residual stresses/strains in the cymbal and their quantitative relation with the frequency characteristics of the sound generated from the cymbal. In the present study, we have successfully used synchrotron radiation to measure the distribution of residual strain in two kinds of cymbals—after spinforming as well as after hammering. The microstructure and the mechanical properties of the cymbals were measured as well their acoustic response. Based on our experimental data, the inhomogeneous residual stress/strain distributions in the cymbals were deduced in detail and their influence on the frequency characteristics of the sound produced by the cymbals was identified.

previous article Effect of Cross-linking Density on Creep and Recovery Behavior in Epoxy-Based Shape Memory Polymers (SMEPs) for Structural Applications

next article Effects of Heat Treatment on Interface Microstructure and Mechanical Properties of Explosively Welded Ck60/St37 Plates

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

N.H. Fletcher and T.D. Rossing, The Physics of Musical Instruments, Springer, Berlin, 1998CrossRef

G.D. Giulio, E. Esposito, C. Santolini, L. Scalise, Experimental vibrational analysis of drum cymbals, in Proceedings of the 19th International Modal Analysis Conference, p 724–730 (2001)

R. Perrin, G.M. Swallowe, S.A. Zietlow, T.R. Moore, The normal modes of cymbals, in Proceedings of Spring Conference of the Institute of Acoustics 2008: Widening Horizons in Acoustics, Proceedings of the Institute of Acoustics, vol 30, Pt. 2, p 460–467 (2008)

T. Kawai, F. Kuratani, T. Yoshida, T. Masumoto, Sound radiation characteristics of cymbals based on mode shapes, in Proceedings of 52th JSME Hokuriku Shin-etsu Branch Conference, Paper No. 0311, (2015) (in Japanese)

A. Chaigne, C. Touze´, and O. Thomas, Nonlinear Vibrations and Chaos in Gongs and Cymbals, Acoust. Sci. Technol., 2005, 26(5), p 403–409CrossRef

http://koidecymbal.com/lineup/index.html

K. Osamura, S. Machiya, Y. Tsuchiya, H. Suzuki, T. Shobu, M. Sato, S. Harjo, K. Miyashita, Y. Wadayama, S. Ochiai, and A. Nishimura, Thermal Strain Exerted on Superconductive Filaments in Practical Nb₃Sn and Nb₃Al Strands, Supercond. Sci. Technol., 2013, 26, p 094001 (8 pp)

F. Kuratani, T. Yoshida, T. Koide, T. Mizuta, K. Osamura, Understanding the Effect of Hammering Process on Vibration Characteristics of Cymbals, MoViC & RASD 2016, J Phys. Conf. Ser., 2016, 744, p 012110CrossRef

G.S. Schajer, Understanding Saw Tensioning, Holz als Rob-und Werkst., 1984, 42, p 425–430CrossRef

10.

C.D. Mote, Jr, and L.T. Nieh, On the Foundation of Circular-saw Stability Theory, Wood Fiber, 1973, 5, p 160–169

11.

E. Barz, Vergleichende Untersuchungen ueber das Spannen von Kreissaegeblaettern mit Maschinen und mit Richthaemmern. (Comparative studies of tensioning of circular sawblades with machines and by hammering). Holz Rob und Werkst. 21, 135–144, CSIRO Australia Translation No. 6583 (1963)

Title: The Correlation Between the Percussive Sound and the Residual Stress/Strain Distributions in a Cymbal
Authors: Kozo Osamura
Fumiyasu Kuratani
Toshio Koide
Wataru Ogawa
Hiroyasu Taniguchi
Yoshiyuki Monju
Taiji Mizuta
Takahisa Shobu
Publication date: 24-10-2016
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 12/2016
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2408-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2016

Corrosive Metabolic Activity of Desulfovibrio sp. on 316L Stainless Steel

A New Constitutive Model for the High-Temperature Flow Behavior of 95CrMo Steel

Swing Friction Behavior of the Contact Interface Between CoCrMo and UHMWPE Under Dynamic Loading

Detection of Secondary Phases in UNS S32760 Superduplex Stainless Steel by Destructive and Non-destructive Techniques

Grit Blasting for Removal of Recast Layer from EDM Process on Inconel 718 Shaft: An Evaluation of Surface Integrity

The Tribological Performance of Surface Treated Ti6A14V as Sliding Against Si3N4 Ball and 316L Stainless Steel Cylinder

Premium Partners