Top

International Journal on Interactive Design and Manufacturing (IJIDeM)

Published in:

26-04-2018 | Original Paper

The distribution of frictional heat generated between the contacting surfaces of the friction clutch system

Authors: Oday I. Abdullah, Josef Schlattmann, Mahir H. Majeed, Laith A. Sabri

Published in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Issue 2/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The frictional heat generated during the initial engagement will influence negatively the performance and lifetime of the friction clutches, this heat generated will lead to appear excessive temperatures in the contact surfaces and subsequently accelerate the wear process in the contact area. The amount and distribution of the heat generated are depending on many variables such as the contact pressure, the coefficient of friction, sliding speed, etc. In this research paper, MATLAB program was built based on the analytical solutions which used to determine the distribution and amount of the total heat generation at the interface between the contacting parts of the friction clutch. Furthermore, the amount and distribution of the frictional heat generation on the contact area of each element of the friction clutch system (flywheel, clutch disc, and pressure plate) during the sliding stage was calculated. Finally, the program was introduced using MATLAB GUI (graphical user interfaces) to analyze the heat generated on the friction clutch surfaces. Different types of materials (thermal properties), sliding time, torque function and angular sliding speed function can be applied into the software to find the solution for a specific case of a single-plate friction clutch.

previous article A two-bar truss structural model under uncertainty: a uncertain chance constrained geometric programming (UCCGP) approach

next article Alternative elliptic integral solution to the beam deflection equations for the design of compliant mechanisms

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Barber, J.R.: The transient thermoelastic contact of a sphere sliding on a plane. Wear 59, 21–29 (1980)CrossRef

Barber, J.R., Martin-Moran, C.J.: Green’s functions for transient thermoelastic contact problems for the half-plane. Wear 79, 11–19 (1982)CrossRef

Azarkhin, A., Barber, J.R.: Transient thermoelastic contact problem of two sliding half-planes. Wear 102, 1–13 (1985)MATHCrossRef

Azarkhin, A., Barber, J.R.: Thermoplastic instability for the transient contact problem of two sliding half-planes. J. Appl. Mech. 53, 565–572 (1986)MATHCrossRef

Barber, J.R., Beamond, T.W., Waring, J.R., Pritchard, C.: Implications of thermoelastic instability for the design of brakes. J. Tribol. 107, 206–210 (1985)CrossRef

Zhang, R., Barber, J.R.: Transient thermoelastic contact and stability of two thin-walled cylinders. J. Therm. Stress. 16, 31–54 (1993)MathSciNetCrossRef

D’Agostino, V., Cappetti, N., Pisaturo, M., Senatore, A.: Improving the engagement smoothness through multi-variable frictional map in automated dry clutch control. In: Proceedings of the ASME2012 International Mechanical Engineering Congress and Exposition, Transportation Systems, vol. 11, pp. 9–19. Houston, Texas, USA (2012)

Senatore, A., D’Agostino, V., Giuda, R., Petrone, V.: Experimental investigation and neural network prediction of brakes and clutch material frictional behaviour considering the sliding acceleration influence. Tribol. Int. 44(10), 1199–1207 (2011)CrossRef

Pisaturo, M., Senatore, A.: Simulation of engagement control in automotive dry-clutch and temperature field analysis through finite element model. Appl. Therm. Eng. 93, 958–966 (2016)CrossRef

10.

Pisaturo, M., Senatore, A., D’Agostino, V.: Automotive dry-clutch control: engagement tracking and FE thermal model. In: INES 2016 20th Jubilee IEEE International Conference on, Budapest, pp. 69–74 (2016)

11.

Abdullah, O.I., Schlattmann, J.: Thermal behavior of friction clutch disc based on uniform pressure and uniform wear assumptions. Friction 4(3), 1–10 (2016)CrossRef

12.

Abdullah, O.I., Schlattmann, J.: Temperature analysis of a pin-on-disc tribology test using experimental and numerical approaches. Friction 4(2), 1–9 (2016)CrossRef

13.

Abdullah, O.I., Akhtar, M.J., Schlattmann, J.: Investigation of thermo-elastic behavior of multidisk clutches, ASME. J. Tribol. 137(1), 1–9 (2015)CrossRef

14.

Abdullah, O.I., Schlattmann, J.: The effect of constraint condition on contact pressure distribution of multi-disc friction clutches. Tribologia 2015(6), 9–18 (2015)

15.

Abdullah, O.I., Schlattmann, J., Lytkin, M.: Effect of surface roughness on the thermoelastic behavior of friction clutches. FME Trans. 43(3), 241–248 (2015)

16.

Abdullah, O.I., Schlattmann, J.: An investigation into the thermal behavior of the grooved dry friction clutch, ASME. J. Tribol. 136(3), 1–6 (2014)CrossRef

17.

Abdullah, O.I., Schlattmann, J.: Computation of surface temperatures and energy dissipation in dry friction clutches for varying torque with time. J. Int. J Automot. Technol 15(5), 733–740 (2014)CrossRef

18.

Abdullah, O.I., Schlattmann, J.: A three-dimensional finite element approach to grooved dry clutches analysis. J. Balk. Tribol. Assoc. 20(2), 184–198 (2014)

19.

Abdullah, O.I., Schlattmann, J., Pireci, E.: Design Optimization of the Rigid Drive Disc of Clutch Using Finite Element Method. SAE Technical Paper. No. 2014-01-0800 (2014)

20.

Abdullah, O.I., Schlattmann, J.: An Investigation of Heat Generation Due to Friction Using Finite Element Method. SAE Technical Paper. No. 2014-01-0954 (2014)

21.

Abdullah, O.I., Schlattmann, J.: The correction factor for rate of energy generated in the friction clutches under uniform pressure condition. J. Adv. Theor. Appl. Mech. 5(6), 277–290 (2012)

22.

Abdullah, O.I., Schlattmann, J., Majeed, M.H., Sabri, L.A.: The temperatures distributions of a single-disc clutches using heat partitioning and total heat generated approaches. Case Stud. Therm. Eng. 11, 43–54 (2018)CrossRef

23.

Abdullah, O.I., Sabri, L.A., Al-Sahb, W.A.: Finite element analysis of the thermal behaviour of single-disc clutches during repeated engagements. Tribologia 2(2016), 9–24 (2016)CrossRef

24.

Jania, Z.J.: Friction-clutch transmissions. Mach. Des. 30, 23–26 (1958)

25.

Zienkiewicz, O.C.: The Finite Element Method. McGraw-Hill, New York (1977)MATH

Title: The distribution of frictional heat generated between the contacting surfaces of the friction clutch system
Authors: Oday I. Abdullah
Josef Schlattmann
Mahir H. Majeed
Laith A. Sabri
Publication date: 26-04-2018
Publisher: Springer Paris
Published in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Issue 2/2019
Print ISSN: 1955-2513
Electronic ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-018-0480-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Other articles of this Issue 2/2019

Optimization of machining parameters of 2.25Cr1Mo0.25V steel based on response surface method and genetic algorithm

Multiphysics modeling and simulation of laser additive manufacturing process

Comparative study of a topologically optimized lower limb prosthesis

Effect of friction stir welding (FSW) parameters on the peak temperature and the residual stresses of aluminum alloy 6061-T6: numerical modelisation

Off-line programming of an industrial robot in a virtual reality environment

Portfolio optimization based on fuzzy entropy

Premium Partner