Top

Journal of Materials Engineering and Performance

Published in:

26-11-2018

The Effect of Flowing Velocity and Impact Angle on the Fluid-Accelerated Corrosion of X65 Pipeline Steel in a Wet Gas Environment Containing CO₂

Authors: Yong Li, Jiankuan Li, Kejun Wang, Longfei Song, Cuiwei Du, Renyang He

Published in: Journal of Materials Engineering and Performance | Issue 12/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This study investigated the effect of flowing velocity and impact angle on the fluid-accelerated corrosion (FAC) of X65 pipeline steel in a wet CO₂-containing environment by corrosion morphology analysis, electrochemical measurement, and hydromechanical numerical analysis. It has been found that the corrosion behavior was controlled by the ion diffusion rate and shear stress due to the flowing gas. With an increase in the flowing velocity, the pitting corrosion initially decreased and then increased when the flowing velocity exceeded 14 m/s; this increase is caused by the augmentation of shear stress. When the impact angle decreased, the position of serious corrosion gradually moved outwards.

previous article High-Temperature Low-Cycle Fatigue Behavior of HS80H Ferritic–Martensitic Steel Under Dynamic Strain Aging

next article A Low-Cost Lightweight Entropic Alloy with High Strength

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

X. Li, D. Zhang, Z. Liu, Z. Li, C. Du, and C. Dong, Materials Science: Share Corrosion Data, Nature, 2015, 527(7579), p 441–442CrossRef

Z. Liu, C. Dong, X. Li, Q. Zhi, and Y. Cheng, Stress Corrosion Cracking of 2205 Duplex Stainless Steel in H₂S–CO₂ Environment, J. Mater. Sci., 2009, 44(16), p 4228–4234CrossRef

Q. Liu, Z. Li, Z. Liu, X. Li, and S. Wang, Effects of H₂S/HS− on Stress Corrosion Cracking Behavior of X100 Pipeline Steel Under Simulated Sulfate-Reducing Bacteria Metabolite Conditions, J. Mater. Eng. Perform., 2017, 26(6), p 2763–2775CrossRef

Z.Y. Liu, H. Li, Z.J. Jia, C.W. Du, and X.G. Li, Failure Analysis of P110 Steel Tubing in Low-Temperature Annular Environment of CO₂ Flooding Wells, Eng. Fail. Anal., 2016, 60, p 296–306CrossRef

A. Kahyarian, M. Singer, and S. Nesic, Modeling of Uniform CO₂ Corrosion of Mild Steel in Gas Transportation Systems: A Review, J. Nat. Gas Sci. Eng., 2016, 29, p 530–549CrossRef

M. Bagheri, A. Alamdari, and M. Davoudi, Quantitative Risk Assessment of Sour Gas Transmission Pipelines Using CFD, J. Nat. Gas Sci. Eng., 2016, 31, p 108–118CrossRef

K. Najmi, B.S. McLaury, S.A. Shirazi, and S. Cremaschi, Experimental study of low concentration Sand Transport in Wet Gas Flow Regime in Horizontal Pipes, J. Nat. Gas Sci. Eng., 2015, 24, p 80–88CrossRef

P.B. Machado, J.G.M. Monteiro, J.L. Medeiros, H.D. Epsom, and O.Q.F. Araujo, Supersonic Separation in Onshore Natural Gas Dew Point Plant, J. Nat. Gas Sci. Eng., 2012, 6, p 43–49CrossRef

L. Wang, Y. Xing, Z. Liu, D. Zhang, C. Du, and X. Li, Erosion-Corrosion Behavior of 2205 Duplex Stainless Steel in Wet Gas Environments, J. Nat. Gas Sci. Eng., 2016, 35, p 928–934CrossRef

10.

J. Yang, L. Zhang, R. Ding, J. Sun, and M. Lu, H2S/CO2 Corrosion Behaviour of X60 Pipeline Steel in Wet Gas and solUtion, Acta Metall. Sin., 2008, 44(11), p 1366–1371

11.

S.S. Rajahram, T.J. Harvey, and R.J.K. Wood, Erosion-Corrosion Resistance of Engineering Materials in Various Test Conditions, Wear, 2009, 267(1–4), p 244–254CrossRef

12.

M.A. Islam and Z.N. Farhat, The Synergistic Effect Between Erosion and Corrosion of API, Pipeline in CO₂ and Saline Medium, Tribol. Int., 2013, 68, p 26–34CrossRef

13.

Y. Zhao, F. Zhou, J. Yao, S. Dong, and N. Li, Erosion-Corrosion Behavior and Corrosion Resistance of AISI, 316 Stainless Steel in Flow Jet Impingement, Wear, 2015, 328, p 464–474CrossRef

14.

R.J.K. Wood, J.C. Walker, T.J. Harvey, S. Wang, and S.S. Rajahram, Influence of Microstructure on the Erosion and erosion-Corrosion Characteristics of 316 Stainless Steel, Wear, 2013, 306(1–2), p 254–262CrossRef

15.

E. Mahdi, A. Rauf, and E.O. Eltai, Effect of Temperature and Erosion on Pitting Corrosion of X100 steel in Aqueous Silica Slurries Containing Bicarbonate and Chloride Content, Corros. Sci., 2014, 83, p 48–58CrossRef

16.

W. Zhao, C. Wang, T. Zhang, M. Yang, B. Han, and A. Neville, Effects of Laser Surface Melting on Erosion-Corrosion of X65 Steel in Liquid-Solid Jet Impingement Conditions, Wear, 2016, 362, p 39–52CrossRef

17.

X. Jiang, Y.G. Zheng, and W. Ke, Effect of flow velocity and Entrained sand on Inhibition Performances of Two Inhibitors for CO2 Corrosion of N80 Steel in 3% NaCl Solution, Corros. Sci., 2005, 47(11), p 2636–2658CrossRef

18.

G.A. Zhang, L. Zeng, H.L. Huang, and X.P. Guo, A Study of Flow Accelerated Corrosion at Elbow of Carbon Steel Pipeline by Array Electrode and Computational Fluid Dynamics Simulation, Corros. Sci., 2013, 77, p 334–341CrossRef

19.

S. Papavinasam, R.W. Revie, M. Attard, A. Demoz, and K. Michaelian, Comparison of Laboratory Methodologies to Evaluate Corrosion Inhibitors for Oil and Gas Pipelines, Corrosion, 2003, 59(10), p 897–912CrossRef

20.

H. Luo, C.F. Dong, X.G. Li, and K. Xiao, The Electrochemical Behaviour of 2205 duplex Stainless Steel in Alkaline Solutions with Different pH in the Presence of chlOride, Electrochim. Acta, 2012, 64, p 211–220CrossRef

21.

A.H. Hosseinloo, F.F. Yap, and L.Y. Lim, Design and Analysis of Shock and Random Vibration Isolation System for a Discrete Model Of Submerged Jet Impingement Cooling System, J. Vib. Control, 2015, 21(3), p 468–482CrossRef

22.

G. Zhang and Y. Cheng, Electrochemical Characterization and Computational Fluid Dynamics Simulation of Flow-Accelerated Corrosion of X65 Steel in a CO2-Saturated Oilfield Formation Water, Corros. Sci., 2010, 52(8), p 2716–2724CrossRef

23.

E. DIN, 8407 Corrosion of metals and alloys—removal of corrosion products from corrosion test specimens, Wien: Austrian Standards plus GmbH

24.

L. Giourntas, T. Hodgkiess, and A.M. Galloway, Comparative Study of Erosion-Corrosion Performance on a Range of Stainless Steels, Wear, 2015, 332, p 1051–1058CrossRef

25.

D.A. Lopez, T. Perez, and S.N. Simison, The Influence of Microstructure And Chemical Composition of Carbon and Low Alloy Steels in CO2 Corrosion. A State-of-the-Art Appraisal, Mater. Des., 2003, 24(8), p 561–575CrossRef

26.

G.A. Zhang, L.Y. Xu, and Y.F. Cheng, Investigation of Erosion-Corrosion of 3003 Aluminum Alloy in Ethylene Glycol-Water Solution by Impingement Jet System, Corros. Sci., 2009, 51(2), p 283–290CrossRef

27.

Y.M. Wu, Applying Process Modeling to Screen Refining Equipment for Wet Hydrogen Sulfide Service, Corrosion, 1998, 54(2), p 169–173CrossRef

28.

J.K. Heuer and J.F. Stubbins, An XPS Characterization of FeCO3 Films from CO2 Corrosion, Corros. Sci., 1999, 41(7), p 1231–1243CrossRef

29.

P. Wang, J. Wang, S. Zheng, Y. Qi, M. Xiong, and Y. Zheng, Effect of H2S/CO2 Partial Pressure Ratio on the Tensile Properties of X80 Pipeline Steel, Int. J. Hydrogen Energy, 2015, 40(35), p 11925–11930CrossRef

30.

X.S. Huang, Y.M. Qi, C.F. Chen, H.B. Yu, and G.W. Lu, Effect of Environmental Factors on Corrosion Behaviour of L360QCS Pipeline Steel in H2S/CO2 Environments, Corros. Eng., Sci. Technol., 2015, 50(3), p 169–177CrossRef

31.

Q. Hou, Z. Liu, C. Li, and X. Li, The Mechanism of Stress Corrosion Cracking of Alloy 690TT in a Caustic Solution Containing Lead, Corros. Sci., 2017, 128, p 154–163CrossRef

32.

J. Banas, U. Lelek-Borkowska, B. Mazurkiewicz, and W. Solarski, Effect of CO₂ and H₂S on the Composition and Stability of Passive Film in Iron Alloys in Geothermal Water, Electrochim. Acta, 2007, 52(18), p 5704–5714CrossRef

33.

R.N. Parkins and S. Zhou, The Stress Corrosion Cracking of C-Mn Steel in CO2-HCO3–CO32- Solutions. I. Stress Corrosion Data, Corros. Sci., 1997, 39(1), p 159–173CrossRef

34.

M. Metikoš-Huković, I. Škugor, Z. Grubač, and R. Babić, Complexities of Corrosion Behaviour of Copper–Nickel Alloys Under Liquid Impingement Conditions in Saline Water, Electrochim. Acta, 2010, 55(9), p 3123–3129CrossRef

35.

A. Demoz and T. Dabros, Relationship Between Shear Stress on the Walls of a Pipe and an Impinging Jet, Corros. Sci., 2008, 50(11), p 3241–3246CrossRef

36.

M.A. Islam, Z.N. Farhat, E.M. Ahmed, and A. Alfantazi, Erosion Enhanced Corrosion and Corrosion Enhanced Erosion of API, X-70 Pipeline Steel, Wear, 2013, 302(1–2), p 1592–1601CrossRef

37.

M. Elena Olvera-Martinez, J. Mendoza-Flores, and J. Genesca, CO2 Corrosion Control in Steel Pipelines. Influence of Turbulent Flow on the Performance of Corrosion Inhibitors, J. Loss Prev. Process Ind., 2015, 35, p 19–28CrossRef

38.

Z.Y. Liu, X.G. Li, and Y.F. Cheng, Effect of Strain Rate on Cathodic Reaction During Stress Corrosion Cracking of X70 Pipeline Steel in a Near-Neutral pH Solution, J. Mater. Eng. Perform., 2011, 20(7), p 1242–1246CrossRef

39.

Z. Liu, C. Du, X. Zhang, F. Wang, and X. Li, Effect of pH Value on Stress Corrosion Cracking of X70 Pipeline Steel in Acidic Soil Environment, Acta Metallurgica Sinica, 2013, 26(4), p 489–496CrossRef

40.

K. Sugiyama, K. Harada, and S. Hattori, Influence of Impact Angle of Solid Particles on Erosion by Slurry Jet, Wear, 2008, 265(5), p 713–720CrossRef

Title: The Effect of Flowing Velocity and Impact Angle on the Fluid-Accelerated Corrosion of X65 Pipeline Steel in a Wet Gas Environment Containing CO2
Authors: Yong Li
Jiankuan Li
Kejun Wang
Longfei Song
Cuiwei Du
Renyang He
Publication date: 26-11-2018
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 12/2018
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3773-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2018

Achieving Grain Refinement and Related Mechanical Property Improvement of an Al-Zn-Mg-Cu Alloy Through Severe Plastic Deformation

Effect of Ni Addition to Sn0.7Cu Solder Alloy on Thermal Behavior, Microstructure, and Mechanical Properties

Hydrogen Effect on the Fatigue Crack Growth in Austenitic Stainless Steel Investigated by a New Method Based on Nanohardness Distribution

Tribological Behavior of Electrochemically Etched AISI 316 Stainless Steel with a Textured Surface

Formability, Microstructure and Mechanical Properties of Flow-Formed 17-4 PH Stainless Steel

Studies on Bio-acceptability of Thermo-Mechanically Processed Mg-4Li-0.5Ca Alloy and Its Microstructural Correlation

Premium Partners