Top

Journal of Materials Engineering and Performance

Published in:

01-08-2015

The Influence of Surface Nanocrystallization Induced by Shot Peening on Corrosion Behavior of NiTi Alloy

Authors: S. Olumi, S. K. Sadrnezhaad, M. Atai

Published in: Journal of Materials Engineering and Performance | Issue 8/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Nickel-titanium (NiTi) shape memory alloys have been widely used as implant materials, due to their superior shape memory properties and similar mechanical behavior to bone tissue. The presence of nickel on the surface of nickel-titanium alloy and release of this ion in the body environment will result in some allergic reactions. In current study, we used shot pinning process to produce nanocrystalline nickel-titanium alloy with increased corrosion resistance. Field emission scanning electron microscopy (FE-SEM), x-ray diffraction (XRD) analysis, and atomic force microscopy were employed to investigate the surface features of samples. The quantitative chemical analysis of NiTi and modified NiTi samples was conducted by energy dispersive x-ray method. The electrochemical behavior of NiTi alloy was evaluated using the potentiodynamic polarization scan and electrochemical impedance spectroscopy tests in Ringer solution after and prior to the shot pining process. The result of XRD analysis of modified samples showed an average crystalline size of 23 nm. Moreover, FE-SEM confirmed the development of a nanostructured alloy induced by shot pinning process. Modification of NiTi alloy by shot-peening process resulted in corrosion resistance improvement and decrease in the corrosion rate, which consequently led to less release rate of the toxic nickel ions in the corrosive environment, compared to the non-modified samples.

previous article Fatigue Characteristics and Quality Index of A357 Type Semi-Solid Aluminum Castings Used for Automotive Application

next article The Influence of TiO2 Addition on the Modulus of Rupture of Alumina-Magnesia Refractory Castables

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

C.D.J. Barras and K.A. Myers, Nitinol-Its use in Vascular Surgery and Other Applications, Eur. J. Vasc. Endovasc. Surg., 2000, 19(6), p 564–569CrossRef

M.H. Elahinia, M. Hashemi, M. Tabesh, and S.B. Bhaduri, Manufacturing and Processing of NiTi Implants: A Review, Prog. Mater Sci., 2012, 57(5), p 911–946CrossRef

F.X. Gil, J.M. Manero, and J.A. Planell, Relevant Aspects in the Clinical Applications of NiTi Shape Memory Alloys, J. Mater. Sci., 1996, 7(7), p 403–406

B.J. Park and Y.K. Kim, Metallic Biomaterials, Balance, 2003, 1, p 50

K.W.K. Yeung, R.W.Y. Poon, X.Y. Liu, J.P.Y. Ho, C.Y. Chung, P.K. Chu, W.W. Lu, D. Chan, and K.M.C. Cheung, Investigation of Nickel Suppression and Cytocompatibility of Surface-Treated Nickel-Titanium Shape Memory Alloys by Using Plasma Immersion Ion Implantation, J. Biomed. Mater. Res. Part A, 2005, 72(3), p 238–245CrossRef

H. Maleki-Ghaleh, J. Khalil-Allafi, M. Sadeghpour-Motlagh, M.S. Shakeri, S. Masoudfar, A. Farrokhi, Y.B. Khosrowshahi, A. Nadernezhad, M.H. Siadati, M. Javidi, M. Shakiba, and E. Aghaie, Effect of Surface Modification by Nitrogen Ion Implantation on the Electrochemical and Cellular Behaviors of Super-Elastic NiTi Shape Memory Alloy, J. Mater. Sci., 2014, 25(12), p 2605–2617

X. Liu, P.K. Chu, and C. Ding, Surface Modification of Titanium, Titanium Alloys, and Related Materials for Biomedical Applications, Mater. Sci. Eng., 2004, 47(3), p 49–121CrossRef

A.K. Shukla, R. Balasubramaniam, and S. Bhargava, Properties of Passive Film Formed on CP Titanium, Ti-6Al-4V and Ti-13.4 Al-29Nb Alloys in Simulated Human Body Conditions, Intermetallics, 2005, 13(6), p 631–637CrossRef

S. Shabalovskaya, J. Anderegg, and J.V. Humbeeck, Critical Overview of Nitinol Surfaces and Their Modifications for Medical Applications, Acta Biomater., 2008, 4(3), p 447–467CrossRef

10.

T. Sun, L.P. Wang, and M. Wang (Ti, O)/Ti and (Ti, O, N)/Ti Composite Coatings Fabricated via PIIID for the Medical Application of NiTi Shape Memory Alloy, J. Biomed. Mater. Res. B, 2011, 96(2), p 249–260CrossRef

11.

X.Y. Wang and D.Y. Li, Mechanical, Electrochemical and Tribological Properties of Nano-Crystalline Surface of 304 Stainless Steel, Wear, 2003, 255(7), p 836–845CrossRef

12.

A. Balyanov, J. Kutnyakova, N.A. Amirkhanova, V.V. Stolyarov, R.Z. Valiev, X.Z. Liao, Y.H. Zhao, Y.B. Jiang, H.F. Xu, T.C. Lowe, and Y.T. Zhu, Corrosion Resistance of Ultra Fine-Grained Ti, Scr. Mater., 2004, 51(3), p 225–229CrossRef

13.

L. Wang, Y. Lin, Zh Zeng, W. Liu, Q. Xue, L. Hu, and J. Zhang, Electrochemical Corrosion Behavior of Nanocrystalline Co Coatings Explained by Higher Grain Boundary Density, Electrochim. Acta, 2007, 52(13), p 4342–4350CrossRef

14.

A. Balakrishnan, B.C. Lee, T.N. Kim, and B.B. Panigrahi, Corrosion Behaviour of Ultra Fine Grained Titanium in Simulated Body Fluid for Implant Application, Trends Biomater. Artif. Organs, 2008, 22(1), p 194–208

15.

C.T. Kwok, F.T. Cheng, H.C. Man, and W.H. Ding, Corrosion Characteristics of Nanostructured Layer on 316L Stainless Steel Fabricated by Cavitation-Annealing, Mater. Lett., 2006, 60(19), p 2419–2422CrossRef

16.

M. Umemoto, Y. Todaka, and K. Tsuchiya, Formation of Nanocrystalline Structure in Steels by Air Blast Shot Peening, Mater. Trans., 2003, 44(7), p 1488–1493CrossRef

17.

S. Bagherifard, I.F. Pariente, R. Ghelichi, and M. Guagliano, Fatigue Properties of Nanocrystallized Surfaces Obtained by High Energy Shot Peening, Procedia Eng., 2010, 2(1), p 1683–1690CrossRef

18.

X.Y. Wang and D.Y. Li, Mechanical and Electrochemical Behavior of Nanocrystalline Surface of 304 Stainless Steel, Electrochim. Acta, 2002, 47(24), p 3939–3947CrossRef

19.

M. Mhaede, F. Pastorek, and B. Hadzima, Influence of Shot Peening on Corrosion Properties of Biocompatible Magnesium Alloy AZ31 Coated by Dicalcium Phosphate Dihydrate (DCPD), Mater. Sci. Eng. C, 2014, 39, p 330–335CrossRef

20.

T. Wang, J. Yu, and B. Dong, Surface Nanocrystallization Induced by Shot Peening and Its Effect on Corrosion Resistance of 1Cr18Ni9Ti Stainless Steel, Surf. Coat. Technol., 2006, 200(16), p 4777–4781CrossRef

21.

K. Ce and R. Birringer, Estimating Grain-Size Distributions in Nanocrystalline Materials from x-ray Diffraction Profile Analysis, Philos. Mag. A, 1998, 77(3), p 621–640CrossRef

22.

R. Guinebretière, X-ray Diffraction by Polycrystalline Materials, ISTE Ltd, London, 2007

23.

S.N. Rosenbloom, R. Corbett, An Assessment of ASTM F 2129 Electrochemical Testing of Small Medical Implants—Lessons Learned, Corrosion 2007 Conference & Expo, 2007, p 11–15.

24.

X.P. Jiang, X.Y. Wang, J.X. Li, D.Y. Li, C.-S. Man, M.J. Shepard, and T. Zhai, Enhancement of Fatigue and Corrosion Properties of Pure Ti by Sandblasting, Mater. Sci. Eng. A, 2006, 429(1), p 30–35CrossRef

25.

T. Hu, Y.C. Xin, S.L. Wu, C.L. Chu, J. Lu, L. Guan, H.M. Chen, T.F. Hung, K.W.K. Yeung, and P.K. Chu, Corrosion Behavior on Orthopedic NiTi Alloy with Nanocrystalline/Amorphous Surface, Mater. Chem. Phys., 2011, 126(1), p 102–107CrossRef

26.

F.L. Nie, Y.F. Zheng, Y. Cheng, S.C. Wei, and R.Z. Valiev, In Vitro Corrosion and Cytotoxicity on Microcrystalline, Nanocrystalline and Amorphous NiTi Alloy Fabricated by High Pressure Torsion, Mater. Lett., 2010, 64(8), p 983–986CrossRef

27.

Z.J. Zheng, Y. Gao, Y. Gui, and M. Zhu, Corrosion Behaviour of Nanocrystalline 304 Stainless Steel Prepared by Equal Channel Angular Pressing, Corros. Sci., 2012, 54, p 60–67CrossRef

28.

T. Hu, Ch Chu, Y. Xin, Sh Wu, K.W.K. Yeung, and P.K. Chu, Corrosion Products and Mechanism on NiTi Shape Memory Alloy in Physiological Environment, J. Mater. Res., 2010, 25(02), p 350–358CrossRef

29.

H.B. Lu, Y. Li, and F.H. Wang, Synthesis of Porous Copper from Nanocrystalline Two-Phase Cu-Zr Film by Dealloying, Scr. Mater., 2007, 56(2), p 165–168CrossRef

30.

L. Liu, Y. Li, and F. Wang, Electrochemical Corrosion Behavior of Nanocrystalline Materials—A Review, J. Mater. Sci. Technol., 2010, 26(1), p 1–14CrossRef

31.

H. Maleki-Ghaleh, K. Hajizadeh, A. Hadjizadeh, M.S. Shakeri, S.G. Alamdari, S. Masoudfar, E. Aghaie, M. Javidi, J. Zdunek, and K.J. Kurzydlowski, Electrochemical and Cellular Behavior of Ultrafine-Grained Titanium In Vitro, Mater. Sci. Eng. C, 2014, 39, p 299–304CrossRef

Title: The Influence of Surface Nanocrystallization Induced by Shot Peening on Corrosion Behavior of NiTi Alloy
Authors: S. Olumi
S. K. Sadrnezhaad
M. Atai
Publication date: 01-08-2015
Publisher: Springer New York
Published in: Journal of Materials Engineering and Performance / Issue 8/2015
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1570-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2015

Sintering, Microstructure, and Electrical Conductivity of Zirconia-Molybdenum Cermet

Effect of Phase Transformation Conditions on the Microstructure and Tensile Properties of Ti-3Al-15Mo-3Nb-0.2Si Alloy

Mechanical Properties and Corrosion Behavior of CeO2 and SiC Incorporated Al5083 Alloy Surface Composites

Electrochemical Corrosion and In Vitro Bioactivity of SiO2:ZrO2-Coated 316L Stainless Steel in Simulated Body Fluid

Fabrication of Microporous Corundum-Spinel Refractory Castables by Foam-Gelcasting Methods

Tribological Performance of NiAl Self-lubricating Matrix Composite with Addition of Graphene at Different Loads

Premium Partners