Top

Polymer Science, Series D

Published in:

01-06-2023

The Use of Thermal Analysis for the Study of Carbon Fillers in Polymer-Composite Materials

Authors: V. A. Bolshakov, N. V. Antyufeeva, A. M. Safronov

Published in: Polymer Science, Series D | Issue 2/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Currently, the Federal State Unitary Enterprise “All-Russian Research Institute of Aviation Materials” has developed a fairly large range of carbon fiber for the aviation industry. With the transition to Russian carbon fillers, it becomes necessary to control the quality of the manufactured products, in particular, the amount of sizing composition on the fillers and control temperature of their thermal-oxidative degradation. In the paper, a methodological approach has been used to determine the weight fraction of the sizing composition in carbon fillers and temperature of their thermo-oxidative degradation by the method of synchronous thermal analysis.

previous article The Effect of Thermal Stresses on the “Crazing Resistance” of Optically Transparent Polycarbonate

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. N. Kablov, “Innovative developments of FSUE VIAM for the implementation of the “Strategic directions for the development of materials and technologies for their processing for the period up to 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015). https://doi.org/10.18577/2071-9140-2015-0-1-3-33CrossRef

E. N. Kablov, “VIAM: next-generation materials for PD-14,” Krylya Rodiny, Nos. 7–8, 54–58 (2019).

A. S. Kolobkov, “Polymer composite materials for various aircraft designs (review),” Trudy VIAM, Nos. 6–7, 05 (2020). https://doi.org/10.18577/2307-6046-2020-0-67-38-44

N. Yu. Podzhivotov, E. N. Kablov, V. V. Antipov, V. S. Erasov, N. Yu. Serebrennikova, M. R. Abdullin, and M. V. Limonin, “Layered metal-polymer materials in aircraft structural elements,” Perspektivnye Mater., No. 10, 5–19 (2016).

A. E. Raskutin and I. I. Sokolov, “CFRPs and glass-reinforced plastics of a new generation,” Trudy VIAM No. 4 (2013).

A. E. Raskutin, “Russian polymer composite materials of a new generation, their development and implementation in promising designs under development,” Aviats. Mater. Tekhnol., No. S, 349–367 (2017). https://doi.org/10.18577/2071-9140-2017-0-S-349-367

G. F. Zhelezina, S. I. Voinov, T. D. Karimbaev, and A. A. Chernyshev, “Aramid organoplastics for aircraft engine fan cases,” Vopr. Materialoved., No. 32, 153–165 (2017).

G. N. Petrova and E. Ya. Beider, “Development and research of sizing compounds for thermoplastic carbon fiber reinforced plastics,” Aviats. Mater. Tekhnol., No. 12 (2016). https://doi.org/10.18577/2307-6046-2016-0-12-9-9

N. V. Antyufeeva, P. L. Zhuravleva, V. M. Aleksashin, and K. E. Kutsevich, “Influence of the degree of curing of the binder on the physical and mechanical properties of carbon fiber and the microstructure of the interfacial layer carbon fiber/matrix,” Klei. Germetiki. Tekhnol., No. 12, 26–30 (2014).

10.

A. V. Zuev, Yu. V. Loshchinin, D. Ya. Barinov, and P. S. Marakhovskii, “Computational and experimental studies of thermophysical properties,” Aviats. Mater. Tekhnol., No. S, 575–595 (2017). https://doi.org/10.18577/2071-9140-2071-0-S-575-579

11.

N. V. Antyufeeva, V. M. Aleksashin, and Yu. V. Stolyankov, “Modern methodological support for thermoanalytical studies of polymer composites and prepregs,” Kompoz. Nanostrukt. 6, 176–184 (2014).

12.

N. V. Antyufeeva and M. Aleksashin, “Development, research and prediction of the properties of polymer composite materials using thermal analysis methods,” in Proceedings of Moscow Conference of Young Scientists, Graduate Students, and Students “Scientific and Technical Problems of the Development of the Moscow Metropolis” (Inst. Mashinostr. Ross. Akad. Nauk, Moscow, 2003), pp. 224–233.

13.

Ni Jing and A. Hammer, “Thermal analysis of polymers, Part 5: DSC and TGA of elastomers,” User Com., No. 35, 1–5 (2012).

14.

Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry (DSC) ASTM E2160-04.

15.

AITM. Airbus Industrie Test Method Determination of the Extent of Cure Differential Scanning Calorimetry AIMS 3-0008.

Title: The Use of Thermal Analysis for the Study of Carbon Fillers in Polymer-Composite Materials
Authors: V. A. Bolshakov
N. V. Antyufeeva
A. M. Safronov
Publication date: 01-06-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 2/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223020065

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2023

An Investigation of Complexes of Lignin Found in Plant Raw Materials as a Natural Binder in Obtaining Plastic in Closed Molds

Modification of High-Pressure Polyethylene and Ethylene–Vinyl Acetate Copolymer with Sepiolite Chain-Layered Silicate

Adhesive-Material Combustibility-Reduction Methods. Part 2. Combustibility Reduction by Adding Low-Combustibility Oligomers

A Composition Based on Linear-Ladder Siloxane Block Copolymer to Obtain Protective Coatings with High Physical and Chemical Properties

The Influence of Petroleum Polymer Resin on Thermal Oxidation of High-Density Polyethylene

An Electrospun Thermoadhesive Material as a Component of Multilayered Composites for the Filtration of Aircraft Fuels and Hydraulic Fluids

Premium Partners