Top

Metallurgist

Published in:

01-05-2015

Three-Dimensional Mathematical (Dynamic) Model of the Sintering Process. Part II*

Authors: Yu. A. Frolov, L. I. Polotskii

Published in: Metallurgist | Issue 1-2/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This article presents a three-dimensional mathematical (dynamic) model of the sintering process. The model was developed to solve theoretical and practical problems. It allows real-time determination of the distributions of the temperatures and the chemical compositions of the charge, the melt, the sinter cake, and the gas in the bed of charge materials with allowance for transients. The model also permits real-time determination of the temperatures in the pallets and the parameters of the gas flow (including infiltrating air) in the flue system of the sintering machine.

previous article Innovative Water Treatment Technologies for Metallurgical Plants

next article Study of Heat Losses in a Blast Furnace with the Injection of Pulverized-Coal Fuel Into the Hearth

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V. I. Korotich and V. P. Puzanov, “Formation of the re-moistening zone in suction sintering,” Izv. Vyssh. Uchebn. Zaved. Chern. Metall., No. 10, 28–33 (1964).

V. I. Korotich, V. P. Puzanov, and Yu. A. Frolov, “Moisture behavior and the gas dynamics of the bed during the initial period of the sintering operation: Reports 1 and 2,” Izv. Vyssh. Uchebn. Zaved. Chern. Metall., No 10, 26–30 (1968); No. 12, 37–41 (1968).

M. V. Raeva, F. R. Shklyar, and Yu. V. Frolov, “Model of heat and mass transfer during the drying of a porous bed of materials,” Metallurgicheskaya Teplotekhnika: Industry Collection (1974), No. 2, pp. 154–162.

Yu. A. Frolov, V. V. Konoplyanik, G. E. Isaenko, et al., “Analysis of drying, condensation, and the gas dynamics of the bed during the initial period of the sintering operation,” Stal, No. 6, 5–13 (2008).

Yu. A. Frolov, L. I. Polotskii, A. G. Ptichnikov, et al., “Scientific-technical substantiation of the modernization of the sinter plant at the ChMK, with cooling of the sinter on the sintering machines,” Chern. Metall.: Byull. NTiEI, No. 2, 8–17 (2010).

Yu. A. Frolov, A. G. Ptichnikov, V. Kh. Barinov, and N. N. Gorshkov, “Study of the sintering process to modernize sinter plant No. 2 at the ChMK, with cooling of the sinter on the sintering machines,” Chern. Metall.: Byull. NTiEI, No. 2, 8–17 (2010).

A. G. Ptichnikov, V. Kh. Barinov, E. A. Kazantsev, et al., “Improving the efficiency of the sinter plant at the ChMK,” Stal, No. 7, 6–14 (2011).

Title: Three-Dimensional Mathematical (Dynamic) Model of the Sintering Process. Part II*
Authors: Yu. A. Frolov
L. I. Polotskii
Publication date: 01-05-2015
Publisher: Springer US
Published in: Metallurgist / Issue 1-2/2015
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-015-0055-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1-2/2015

Mechanical Tests and Construction of Analytical Models of the Behavior of Materials Under Superplastic Conditions. Part II*

Use of Condensed Soda Pulp for Soda Crystallization in Alumina Production

Autoclave Leaching of Arsenic from Copper Concentrate and Matte

Development of Optimum Billet Cooling Temperature and Rate Regimes for CBCM Conditions at the Dneprovskii Metallurgical Combine

Finite-Element Modeling of Plate-Rolling

Features of Bivalent and Trivalent Iron Oxide Reduction from Slag with Carbon

Premium Partners