Top

Journal of Coatings Technology and Research

Published in:

10-02-2020

Three-step procedure for the deposition of hydroxyapatite coatings

Authors: Bogdan-Ovidiu Taranu, Alexandra Ioana Bucur, Iuliana Sebarchievici

Published in: Journal of Coatings Technology and Research | Issue 4/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Dental implants made of titanium covered with hydroxyapatite (Ti-HA) offer several advantages regarding mechanical, physicochemical, and biochemical aspects but lack stability in time, quality bone-bonding capabilities, or anticorrosion resistance in physiological media. In order to improve the characteristics of dental Ti-HA implants, we propose a new strategy for obtaining the deposited layer, consisting of the electrodeposition of the ceramic (HA) onto Ti metal followed by sintering of the ensemble at 600°C and then the electrodeposition of a second HA layer on top of the first one. The goal was to obtain a coating made up of two HA layers with a porosity gradient (one dense inner layer and one porous outer layer), and the results confirmed the formation of preferentially oriented, low-crystallinity double HA coatings. The base layer was made up of feathery crystals, and the top layer consisted of stellate clusters of crystals. Electrochemical tests, performed in artificial saliva solution at 37°C, showed that some HA coatings could moderately decrease the corrosion rate of Ti.

previous article Excellent water resistance and mechanically robust waterborne polyurethane-acrylate based on dithiol post-chain extension

next article Dispersion stability of titanium dioxide in aqueous isopropanol with polymer dispersant

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Cüneyt Tas, A, “Synthesis of Biomimetic Ca-Hydroxyapatite Powders at 37 °C in Synthetic Body Fluids.” Biomaterials, 21 1429–1438 (2000). https://doi.org/10.1016/S0142-9612(00)00019-3 CrossRef

Bucur, AI, Bucur, RA, Szabadai, Z, Mosoarca, C, Linul, PA, “Influence of Small Concentration Addition of Tartaric Acid on the 220 °C Hydrothermal Synthesis of Hydroxyapatite.” Mater. Charact., 132 76–82 (2017). https://doi.org/10.1016/j.matchar.2017.07.047 CrossRef

Fihri, A, Len, C, Varma, RS, Solhy, A, “Hydroxyapatite: A Review of Syntheses, Structure and Applications in Heterogeneous Catalysis.” Coord. Chem. Rev., 347 48–76 (2017). https://doi.org/10.1016/j.ccr.2017.06.009 CrossRef

Mene, R, Khairnar, R, Aiyer, RC, “Hydroxyapatite Nanoceramic Thick Film: An Efficient CO₂ Gas Sensor.” Open Appl. Phys. J., 3 10–16 (2010)

Ripamonti, U, “Osteoinduction in Porous Hydroxyapatite Implanted in Heterotopic Sites of Different Animal Models.” Biomaterials, 17 31–35 (1996). https://doi.org/10.1016/0142-9612(96)80752-6 CrossRef

Suchanek, W, Yoshimura, M, “Processing and Properties of Hydroxyapatite-Based Biomaterials for Use as Hard Tissue Replacement Implants.” J. Mater. Res., 13 94–117 (1998). https://doi.org/10.1557/JMR.1998.0015 CrossRef

Farrokhi-Rad, M, “Effect of Morphology on the Electrophoretic Deposition of Hydroxyapatite Nanoparticles.” J. Alloys Compd., 741 211–222 (2018). https://doi.org/10.1016/j.jallcom.2018.01.101 CrossRef

Kwok, CT, Wong, PK, Cheng, FT, Man, HC, “Characterization and Corrosion Behavior of Hydroxyapatite Coatings on Ti6Al4V Fabricated by Electrophoretic Deposition.” Appl. Surf. Sci., 255 6736–6744 (2009). https://doi.org/10.1016/j.apsusc.2009.02.086 CrossRef

Kokubo, T, Yamaguchi, S, “Growth of Novel Ceramic Layers on Metals via Chemical and Heat Treatments for Inducing Various Biological Functions.” Front. Bioeng. Biotechnol., 3 1–13 (2015). https://doi.org/10.3389/fbioe.2015.00176 CrossRef

10.

Kunčická, L, Kocich, R, Lowe, TC, “Advances in Metals and Alloys for Joint Replacement.” Prog. Mater. Sci., 88 232–280 (2017). https://doi.org/10.1016/j.pmatsci.2017.04.002 CrossRef

11.

Dominguez-Trujillo, C, Peón, E, Chicardi, E, Pérez, H, Rodriguez-Ortiz, JA, Pavón, JJ, Garcia-Couce, J, Galván, JC, Garcia-Moreno, F, Torres, Y, “Sol-Gel Deposition of Hydroxyapatite Coatings on Porous Titanium for Biomedical Applications.” Surf. Coat. Technol., 333 158–162 (2018). https://doi.org/10.1016/j.surfcoat.2017.10.079 CrossRef

12.

Li, Y, Yang, C, Zhao, H, Qu, S, Li, X, Li, Y, “New Developments of Ti-Based Alloys for Biomedical Applications.” Mater. (Basel), 7 1709–1800 (2014). https://doi.org/10.3390/ma7031709 CrossRef

13.

Jiao, M, Wang, X, “Electrolytic Deposition of Magnesium-Substituted Hydroxyapatite Crystals on Titanium Substrate.” Mater. Lett., 63 2286–2289 (2009). https://doi.org/10.1016/j.matlet.2009.07.048 CrossRef

14.

Johnson, S, Haluska, M, Narayan, RJ, Snyder, RL, “In Situ Annealing of Hydroxyapatite Thin Films.” Mater. Sci. Eng. C., 26 1312–1316 (2006). https://doi.org/10.1016/j.msec.2005.08.023 CrossRef

15.

Shirkhanzadeh, M, “Bioactive Calcium Phosphate Coatings Prepared by Electrodeposition.” J. Mater. Sci. Lett., 10 1415–1417 (1991). https://doi.org/10.1007/BF00735695 CrossRef

16.

Mohajernia, S, Hejazi, S, Eslami, A, Saremi, M, “Surface and Coatings Technology Modified Nanostructured Hydroxyapatite Coating to Control the Degradation of Magnesium Alloy AZ31 in Simulated Body Fluid.” Surf. Coat. Technol., 263 54–60 (2015). https://doi.org/10.1016/j.surfcoat.2014.12.059 CrossRef

17.

Lee, B, Do Kim, Y, Lee, KH, “XPS Study of Bioactive Graded Layer in Ti–In–Nb–Ta Alloy Prepared by Alkali and Heat Treatments.” Biomaterials, 24 2257–2266 (2003). https://doi.org/10.1016/s0142-9612(03)00034-6 CrossRef

18.

Yang, B, “Preparation of Bioactive Titanium Metal via Anodic Oxidation Treatment.” Biomaterials, 25 1003–1010 (2004). https://doi.org/10.1016/S0142-9612(03)00626-4 CrossRef

19.

Assadian, M, Rezazadeh Shirdar, M, Idris, MH, Izman, S, Almasi, D, Taheri, MM, Abdul Kadir, MR, “Optimisation of Electrophoretic Deposition Parameters in Coating of Metallic Substrate by Hydroxyapatite Using Response Surface Methodology.” Arab. J. Sci. Eng., 40 923–933 (2015). https://doi.org/10.1007/s13369-014-1544-2 CrossRef

20.

Lewis, G, “Properties of Open-Cell Porous Metals and Alloys for Orthopaedic Applications.” J. Mater. Sci. Mater. Med., 24 2293–2325 (2013). https://doi.org/10.1007/s10856-013-4998-y CrossRef

21.

Kheimehsari, H, Izman, S, Shirdar Rezazadeh, M, “Effects of HA-Coating on the Surface Morphology and Corrosion Behavior of a Co–Cr-Based Implant in Different Conditions.” J. Mater. Eng. Perform., 24 2294–2302 (2015). https://doi.org/10.1007/s11665-015-1517-y CrossRef

22.

Kayali, Y, Aslan, O, Karabaş, M, Talaş, Ş, “Corrosion Behaviour of Single and Double Layer Hydroxyapatite Coatings on 316L Stainless Steel by Plasma Spray.” Prot. Met. Phys. Chem. Surf., 52 1079–1085 (2016). https://doi.org/10.1134/S2070205116060113 CrossRef

23.

Ebrahimi, N, Ahangari, AS, Zadeh, H, Vaezi, MR, Mozafari, M, “A New Double-Layer Hydroxyapatite/Alumina-Silica Coated Titanium Implants Using Plasma Spray Technique.” Surf. Coat. Technol., 352 474–482 (2018). https://doi.org/10.1016/j.surfcoat.2018.08.022 CrossRef

24.

Roşu, RA, Şerban, V-A, Bucur, AI, Dragoş, U, “Deposition of Titanium Nitride and Hydroxyapatite-Based Biocompatible Composite by Reactive Plasma Spraying.” Appl. Surf. Sci., 258 3871–3876 (2012). https://doi.org/10.1016/j.apsusc.2011.12.049 CrossRef

25.

García, C, Ceré, S, Durán, A, “Bioactive Coatings Deposited on Titanium Alloys.” J. Non Cryst. Solids, 352 3488–3495 (2006). https://doi.org/10.1016/j.jnoncrysol.2006.02.110 CrossRef

26.

Yuan, Q, Golden, TD, “Electrochemical Study of Hydroxyapatite Coatings on Stainless Steel Substrates.” Thin Solid Films, 518 55–60 (2009). https://doi.org/10.1016/j.tsf.2009.06.029 CrossRef

27.

Mbarki, M, Sharrock, P, Fiallo, M, ElFeki, H, “Hydroxyapatite Bioceramic with Large Porosity.” Mater. Sci. Eng. C, 76 985–990 (2017). https://doi.org/10.1016/j.msec.2017.03.097 CrossRef

28.

Nieh, TG, Jankowski, AF, Koike, J, “Processing and Characterization of Hydroxyapatite Coatings on Titanium Produced by Magnetron Sputtering.” J. Mater. Res., 16 3238–3245 (2001). https://doi.org/10.1557/JMR.2001.0446 CrossRef

29.

Eliaz, N, Eliyahu, M, “Electrochemical Processes of Nucleation and Growth of Hydroxyapatite on Titanium Supported by Real-Time Electrochemical Atomic Force Microscopy.” J. Biomed. Mater. Res. Part A, 80 621–634 (2006). https://doi.org/10.1002/jbm.a CrossRef

30.

Isa, NNC, Mohd, Y, Yury, N, “Electrochemical Deposition and Characterization of Hydroxyapatite (HAp) on Titanium Substrate.” APCBEE Proc., 3 46–52 (2012). https://doi.org/10.1016/j.apcbee.2012.06.044 CrossRef

31.

Yen, SK, Lin, CM, “Cathodic Reactions of Electrolytic Hydroxyapatite Coating on Pure Titanium.” Mater. Chem. Phys., 77 70–76 (2002). https://doi.org/10.1016/S0254-0584(01)00562-4 CrossRef

32.

Zhang, JM, Lin, CJ, Feng, ZD, Tian, ZW, “Mechanistic Studies of Electrodeposition for Bioceramic Coatings of Calcium Phosphates by an In Situ pH-Microsensor Technique.” J. Electroanal. Chem., 452 235–240 (1998). https://doi.org/10.1016/S0022-0728(98)00107-7 CrossRef

33.

Qiu, J, Yu, W-Q, Zhang, F-Q, Smales, RJ, Zhang, Y-L, Lu, C-H, “Corrosion Behaviour and Surface Analysis of a Co–Cr and Two Ni–Cr Dental Alloys Before and After Simulated Porcelain Firing.” Eur. J. Oral Sci., 119 93–101 (2011). https://doi.org/10.1111/j.1600-0722.2011.00791.x CrossRef

34.

Cotrut, CM, Vladescu, A, Dinu, M, Vranceanu, DM, “Influence of Deposition Temperature on the Properties of Hydroxyapatite Obtained by Electrochemical Assisted Deposition.” Ceram. Int., 44 669–677 (2018). https://doi.org/10.1016/j.ceramint.2017.09.227 CrossRef

35.

Wang, H, Eliaz, N, Xiang, Z, Hsu, HP, Spector, M, Hobbs, LW, “Early Bone Apposition In Vivo on Plasma-Sprayed and Electrochemically Deposited Hydroxyapatite Coatings on Titanium Alloy.” Biomaterials, 27 4192–4203 (2006). https://doi.org/10.1016/j.biomaterials.2006.03.034 CrossRef

36.

Melero, HC, Sakai, RT, Vignatti, CA, Benedetti, AV, Fernández, J, Guilemany, JM, Suegama, PH, “Corrosion Resistance Evaluation of HVOF Produced Hydroxyapatite and TiO₂-Hydroxyapatite Coatings in Hanks’ Solution.” Mater. Res., (2018). https://doi.org/10.1590/1980-5373-mr-2017-0210 CrossRef

37.

Izquierdo, J, Bolat, G, Cimpoesu, N, Trinca, LC, Mareci, D, Souto, RM, “Electrochemical Characterization of Pulsed Layer Deposited Hydroxyapatite-Zirconia Layers on Ti–21Nb–15Ta–6Zr Alloy for Biomedical Application.” Appl. Surf. Sci., 385 368–378 (2016). https://doi.org/10.1016/j.apsusc.2016.05.130 CrossRef

38.

Chun-Yan, Z, Rong-Chang, Z, Cheng-Long, L, Jia-Cheng, G, “Comparison of Calcium Phosphate Coatings on Mg–Al and Mg–Ca Alloys and Their Corrosion Behavior in Hank’s Solution.” Surf. Coat. Technol., 204 3636–3640 (2010). https://doi.org/10.1016/j.surfcoat.2010.04.038 CrossRef

Title: Three-step procedure for the deposition of hydroxyapatite coatings
Authors: Bogdan-Ovidiu Taranu
Alexandra Ioana Bucur
Iuliana Sebarchievici
Publication date: 10-02-2020
Publisher: Springer US
Published in: Journal of Coatings Technology and Research / Issue 4/2020
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI: https://doi.org/10.1007/s11998-020-00318-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2020

Improved properties of coating binder from palm oil-based oleic acid by copolymerizing with acrylate monomers

Curable hybrid materials for corrosion protection of steel: development and application of UV-cured 3-methacryloxypropyltrimethoxysilane-derived coating

Rapid fabrication of robust and bright colloidal amorphous arrays on textiles

Effect of color on some geometric attributes of visual appearance of non-effect coatings

Preparation of cationic fluorinated acrylate copolymer latex and its application on cotton fabric

Corrosion resistance of HF-treated Mg alloy stent following balloon expansion and its improvement through biodegradable polymer coating

Premium Partners