Top

Journal of Intelligent Manufacturing

Published in:

27-04-2016

Tool wear monitoring and prognostics challenges: a comparison of connectionist methods toward an adaptive ensemble model

Authors: Kamran Javed, Rafael Gouriveau, Xiang Li, Noureddine Zerhouni

Published in: Journal of Intelligent Manufacturing | Issue 8/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In a high speed milling operation the cutting tool acts as a backbone of machining process, which requires timely replacement to avoid loss of costly workpiece or machine downtime. To this aim, prognostics is applied for predicting tool wear and estimating its life span to replace the cutting tool before failure. However, the life span of cutting tools varies between minutes or hours, therefore time is critical for tool condition monitoring. Moreover, complex nature of manufacturing process requires models that can accurately predict tool degradation and provide confidence for decisions. In this context, a data-driven connectionist approach is proposed for tool condition monitoring application. In brief, an ensemble of Summation Wavelet-Extreme Learning Machine models is proposed with incremental learning scheme. The proposed approach is validated on cutting force measurements data from Computer Numerical Control machine. Results clearly show the significance of our proposition.

previous article A novel inverted fuzzy decoupling scheme for MIMO systems with disturbance: a case study of binary distillation column

next article On-line fault diagnosis of FMS based on flows analysis

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Note: classical definition of reliability “the ability of an item to perform a required function under given conditions for a given time interval” (NF EN 13306 2010) is not retained here. Actually, the acception used in this paper is according to application of machine learning approaches in PHM, that do not consider reliability as dependability measure (Bosnić and Kononenko 2009).

An, D., Kim, N. H., & Choi, J. H. (2015). Practical options for selecting data-driven or physics-based prognostics algorithms with reviews. Reliability Engineering & System Safety, 133, 223–236.CrossRef

Benkedjouh, T., Medjaher, K., Zerhouni, N., & Rechak, S. (2013). Health assessment and life prediction of cutting tools based on support vector regression. Journal of Intelligent Manufacturing, 26(2), 213–223.CrossRef

Bhat, A. U., Merchant, S., & Bhagwat, S. S. (2008). Prediction of melting point of organic compounds using extreme learning machines. Industrial and Engineering Chemistry Research, 47(3), 920–925.CrossRef

Bosnić, Z., & Kononenko, I. (2009). An overview of advances in reliability estimation of individual predictions in machine learning. Intelligent Data Analysis, 13(2), 385–401.CrossRef

Camci, F., & Chinnam, R. B. (2010). Health-state estimation and prognostics in machining processes. IEEE Transactions on Automation Science and Engineering, 7(3), 581–597.CrossRef

Cojbasic, Z., Petkovic, D., Shamshirband, S., Tong, C. W., Ch, S., Jankovic, P., et al. (2015). Surfaceroughnessprediction by extreme learning machine constructed withabrasivewater jet. Precision Engineering. doi:10.1016/j.precisioneng.2015.06.013.CrossRef

Das, S., Hall, R., Herzog, S., Harrison, G., & Bodkin, M. (2011). Essential steps in prognostic health management. In IEEE Conference on prognostics and health management. Denver, CO, USA.

Ding, F., & He, Z. (2011). Cutting tool wear monitoring for reliability analysis using proportional hazards model. The International Journal of Advanced Manufacturing Technology, 57(5–8), 565–574.CrossRef

Echo state network. http://reservoir-computing.org/software.

NF EN 13306. (2010). Terminologie de la maintenance.

Feng, G., Huang, G. B., Lin, Q., & Gay, R. (2009). Error minimized extreme learning machine with growth of hidden nodes and incremental learning. IEEE Transactions on Neural Networks, 20(8), 1352–1357.CrossRef

Gao, R., Wang, L., Teti, R., Dornfeld, D., Kumara, S., Mori, M., et al. (2015). Cloud-enabled prognosis for manufacturing. CIRP Annals-Manufacturing Technology. doi:10.1016/j.cirp.2015.05.011.CrossRef

Ghasempoor, A., Moore, T., & Jeswiet, J. (1998). On-line wear estimation using neural networks. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 212(2), 105–112.CrossRef

Grzenda, M., & Bustillo, A. (2013). The evolutionary development of roughness prediction models. Applied Soft Computing, 13(5), 2913–2922.CrossRef

Haddadi, E., Shabghard, M. R., & Ettefagh, M. M. (2008). Effect of different tool edge conditions on wear detection by vibration spectrum analysis in turning operation. Journal of Applied Sciences, 8(21), 3879–3886.CrossRef

Hu, C., Youn, B. D., Wang, P., & Yoon, J. T. (2012). Ensemble of data-driven prognostic algorithms for robust prediction of remaining useful life. Reliability Engineering & System Safety, 103, 120–135.CrossRef

Huang, G. B., & Chen, L. (2007). Convex incremental extreme learning machine. Neurocomputing, 70(16), 3056–3062.CrossRef

Huang, G. B., & Chen, L. (2008). Enhanced random search based incremental extreme learning machine. Neurocomputing, 71(16), 3460–3468.CrossRef

Huang, G. B., Chen, L., & Siew, C. K. (2006). Universal approximation using incremental constructive feedforward networks with random hidden nodes. IEEE Transactions on Neural Networks, 17(4), 879–892.CrossRef

Huang, G. B., Wang, D. H., & Lan, Y. (2011). Extreme learning machines: A survey. International Journal of Machine Learning and Cybernetics, 2(2), 107–122.CrossRef

Huang, G. B., Zhu, Q. Y., & Siew, C. K. (2004). Extreme learning machine: A new learning scheme of feedforward neural networks. In International Joint conference on neural networks. Budapest, Hungary.

Huang, G. B., Zhu, Q. Y., & Siew, C. K. (2006). Extreme learning machine: Theory and applications. Neurocomputing, 70, 489–501.CrossRef

Jaeger, H. (2001). The echo state approach to analyzing and training recurrent neural networks-with an erratum note. Bonn, Germany: German National Research Center for Information Technology GMD Technical Report, 148, 34.

Jaeger, H. (2002). Tutorial on training recurrent neural networks, covering BPPT, RTRL. GMD-Forschungszentrum Informationstechnik: EKF and the echo state network approach.

Jalab, H. A., & Ibrahim, R. W. (2011). New activation functions for complex-valued neural network. International Journal of the Physical Sciences, 6(7), 1766–1772.

Javed, K. (2014). A robust & reliable data-driven prognostics approach based on extreme learning machine and fuzzy clustering. Ph.D. thesis, Université de Franche-Comté.

Javed, K., Gouriveau, R., & Zerhouni, N. (2014). SW-ELM: A summation wavelet extreme learning machine algorithm with a priori parameter initialization. Neurocomputing, 123, 299–307.CrossRef

Javed, K., Gouriveau, R., Zerhouni, N., & Nectoux, P. (2015). Enabling health monitoring approach based on vibration data for accurate prognostics. IEEE Transactions on Industrial Electronics, 62(1), 647–656.CrossRef

Javed, K., Gouriveau, R., Zerhouni, N., Zemouri, R., & Li, X. (2012). Robust, reliable and applicable tool wear monitoring and prognostic: approach based on an improved-extreme learning machine. In IEEE conference on prognostics and health management. Denver, CO, USA.

Khosravi, A., Nahavandi, S., Creighton, D., & Atiya, A. (2011). Comprehensive review of neural network-based prediction intervals and new advances. IEEE Transactions on Neural Networks, 22(9), 1341–1356.CrossRef

Li, X., Lim B. S., Zhou J. H., Huang, S., Phua S. J., & Shaw, K. C. (2009). Fuzzy neural network modeling for tool wear estimation in drymilling operation. In Annual conference of the prognostics and health management society. San Diego, CA, USA.

Liao, L. (2010). An adaptive modeling for robust prognostics on a reconfigurable platform. Ph.D. thesis, University of Cincinnati.

Massol, O., Li, X., Gouriveau, R., Zhou, J. H., & Gan, O. P. (2010). An exTS based neuro-fuzzy algorithm for prognostics and toolcondition monitoring. In 11th international conference on control automation robotics & vision ICARCV’10. Singapore, pp. 1329–1334.

Mathworks: Curve fitting toolbox. (2010). http://mathworks.com/help/toolbox/curvefit/smooth.html

Nguyen, D., & Widrow, B. (1990). Improving the learning speed of 2-layer neural networks by choosing initial values of the adaptive weights. In International joint conference on neural networks IJCNN. San Diego, CA, USA.

Oussar, Y., & Dreyfus, G. (2000). Initialization by selection for wavelet network training. Neurocomputing, 34(1–4), 131–143.CrossRef

Pal, S., Heyns, P. S., Freyer, B. H., Theron, N. J., & Pal, S. K. (2011). Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties. Journal of Intelligent Manufacturing, 22(4), 491–504.CrossRef

Peng, Y., Dong, M., & Zuo, M. J. (2010). Current status of machine prognostics in condition-based maintenance: A review. International Journal Advance Manufacturing Technology, 50, 297–313.CrossRef

Petkovi, D., Danesh, A. S., Dadkhah, M., Misaghian, N., Shamshirband, S., & Pavlovi, N. D. (2016). Adaptive control algorithm of flexible robotic gripper by extreme learning machine. Robotics and Computer-Integrated Manufacturing, 37, 170–178. doi:10.1016/j.rcim.2015.09.006.CrossRef

Rajesh, R., & Prakash, J. S. (2011). Extreme learning machines—A review and state-of-the-art. International Journal of Wisdom Based Computing, 1, 35–49.

Rao, C. R., & Mitra, S. K. (1971). Generalized inverse of matrices and its applications. New York: John Wiley and Sons.

Ren, L., Lv, W., & Jiang, S. (2015). Machine prognostics based on sparse representation model. Journal of Intelligent Manufacturing pp. 1–9. doi:10.1007/s10845-015-1107-8.CrossRef

Rizal, M., Ghani, J. A., Nuawi, M. Z., & Haron, C. H. C. (2013). Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system. Applied Soft Computing, 13(4), 1960–1968.CrossRef

Saikumar, S., & Shunmugam, M. (2012). Development of a feed rate adaption control system for high-speed rough and finish end-milling of hardened en24 steel. International Journal Advance Manufacturing Technology, 59(9–12), 869–884.CrossRef

Shamshirband, S., Mohammadi, K., Chen, H. L., Samy, G. N., Petkovi, D., & Ma, C. (2015). Daily global solar radiation prediction from air temperatures using kernel extreme learning machine: A case study for Iran. Journal of Atmospheric and Solar-Terrestrial Physics, 134, 109–117. doi:10.1016/j.jastp.2015.09.014.CrossRef

Sikorska, J. Z., Hodkiewicz, M., & Ma, L. (2011). Prognostic modelling options for remaining useful life estimation by industry. Journal of Mechanical Systems and Signal Processing, 26(5), 1803–1836.CrossRef

Singh, R., & Balasundaram, S. (2007). Application of extreme learning machine method for time series analysis. International Journal of Intelligent Technology, 2(4), 256–262.

Wang, G., & Cui, Y. (2013). On line tool wear monitoring based on auto associative neural network. Journal of Intelligent Manufacturing, 24(6), 1085–1094.CrossRef

Wu, Y., Hong, G., & Wong, W. (2015). Prognosis of the probability of failure in tool condition monitoring application—A time series based approach. The International Journal of Advanced Manufacturing Technology, 76(1–4), 513–521.CrossRef

Zemouri, R., Gouriveau, R., & Zerhouni, N. (2010). Improving the prediction accuracy of recurrent neural network by a pid controller. International Journal of Systems Applications, Engineering & Development, 4(2), 19–34.

Zhai, L. Y., Er, M. J., Li, X., Gan, O. P., Phua, S. J., Huang, S., Zhou, J. H., Linn, S., & Torabi, A. J. (2010). Intelligent monitoring of surfaceintegrity and cutter degradation in high-speed milling processes. In Annual conference of the prognostics and health management society. Portland, Oregon, USA.

Zhao, G., Shen, Z., Miao, C., & Man, Z. (2009). On improving the conditioning of extreme learning machine: a linear case. In 7th International conference on information, communications and signal processing. ICICS 09. Piscataway, NJ, USA.

Zhou, J., Li, X., Gan, O. P., Han, S., & Ng, W. K. (2006). Genetic algorithms for feature subset selection in equipment fault diagnostics. Engineering Asset Management, 10, 1104–1113.CrossRef

Zhou, J. H., Pang, C. K., Lewis, F., & Zhong, Z. W. (2009). Intelligent diagnosis and prognosis of tool wear using dominant feature identification. IEEE Transactions on Industrial Informatics, 5(4), 454–464.CrossRef

Zhou, J. H., Pang, C. K., Zhong, Z. W., & Lewis, F. L. (2011). Tool wear monitoring using acoustic emissions by dominant-feature identification. IEEE Transactions on Instrumentation and Measurement, 60(2), 547–559.CrossRef

Title: Tool wear monitoring and prognostics challenges: a comparison of connectionist methods toward an adaptive ensemble model
Authors: Kamran Javed
Rafael Gouriveau
Xiang Li
Noureddine Zerhouni
Publication date: 27-04-2016
Publisher: Springer US
Published in: Journal of Intelligent Manufacturing / Issue 8/2018
Print ISSN: 0956-5515
Electronic ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-016-1221-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2018

Capacity planning with ant colony optimization for TFT-LCD array manufacturing

A hybrid approach using genetic and fruit fly optimization algorithms for QoS-aware cloud service composition

A comparison of machine learning methods for cutting parameters prediction in high speed turning process

A sensor fusion and support vector machine based approach for recognition of complex machining conditions

On-line fault diagnosis of FMS based on flows analysis

A heuristic optimization algorithm for HMM based on SA and EM in machinery diagnosis

Premium Partners