Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Tribology Letters
Published in: Tribology Letters 2/2014

01-11-2014 | Original Paper

Tribological Properties of SiC-Reinforced Basalt-Based Coatings

Authors: Ediz Ercenk, Ugur Sen, Senol Yilmaz

Published in: Tribology Letters | Issue 2/2014

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In the current study, the wear behaviour of basalt-based glass and glass–ceramic coatings was investigated. SiC-reinforced basalt-based powders were coated by an atmospheric plasma spray process and evaluated using the ball-on-disk wear test. X-ray diffraction analysis, scanning electron microscopy, and optical microscopy were employed for characterisation. The friction coefficients of the basalt-based glass and glass–ceramic coatings ranged from 0.38 to 0.55 and from 0.12 to 0.70, respectively, depending on the wear condition and SiC content. The wear test results show that SiC addition has a positive effect on the wear resistance of the glass and glass–ceramic coatings.
previous article Effects of pH and Oxidizer on Chemical Mechanical Polishing of AISI 1045 Steel
next article Effects of Interfacial Strength and Roughness on the Static Friction Coefficient

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Wielage, B., Steinhäuser, S., Schnick, T., Nickelmann, D.: Characterization of the wear behavior of thermal sprayed coatings. J. Therm. Spray. Tech. 8, 553–558 (1998)CrossRef
2.
Yılmaz, S., Bayrak, G., Sen, S., Sen, U.: Structural characterization of basalt-based glass–ceramic coatings. Mat. Des. 27, 1092–1096 (2006)CrossRef
3.
Bobkova, N.M., Barantseva, S.E., Kononovich, V.M.: Synthesis of wear-resistant ceramics. Glass Ceram. 59(11–12), 371–373 (2002)CrossRef
4.
Herman, D., Okupski, T., Walkowiak, W.: Wear resistance glass–ceramics with a gahnite phase obtained in CaO–MgO–ZnO–Al2O3–B2O3–SiO2 system. J. Eur. Ceram. Soc. 31, 485–492 (2011)CrossRef
5.
Asi, I., Shalabi, F., Naji, J.: Use of basalt in asphalt concrete mixes. Cons. Build. Mat. 23, 498–506 (2009)CrossRef
6.
Ibrahim, K.M., Tarawneh, K., Rabba, I.: Phases of activity and geochemistry of basaltic dike systems in northeast Jordan parallel to the Red Sea. J. Asia. Earth. Sci. 21, 467–472 (2003)CrossRef
7.
Khater, G.A., Abdel-Motelib, A., El Manawi, A.W., Abu Safiah, M.O.: Glass–ceramics materials from basaltic rocks and some industrial waste. J. Non Crystal. Solid. 358, 1128–1134 (2012)
8.
Ercenk, E., Sen, U., Yilmaz, S.: The effect of SiC addition on the crystallization kinetics of atmospheric plasma–sprayed basalt-based coatings. Ceram. Int. 38, 6549–6556 (2012)CrossRef
9.
Lin, M.T., Jiang, D.Y., Li, L., Lu, Z.L., Lai, T.R., Shi, J.L.: The effect of creep deformation of a β sialon on Vickers hardness, fracture toughness and Weibull modulus. Mat. Sci. Eng. A 351, 9–14 (2003)CrossRef
10.
Gunay, V., Hampshire, S.: Processing and properties of pressureless-sintered Si3N4–SiC composites. J. Mat. Pro. Tech. 54, 348–354 (1996)CrossRef
11.
Mirsaneh, M., Reaney, I.M., Hatton, P.V., James, P.F.: Characterization of high-fracture toughness K-fluorrichterite–fluorapatite glass ceramics. J. Am. Ceram. Soc. 87(2), 240–246 (2004)CrossRef
12.
Evans, A.G., Charles, E.A.: Fracture toughness determinations by indentation. J. Am. Ceram. Soc. 59(7–8), 371–372 (1976)CrossRef
13.
Boch, P., Niepce, J.C. (eds.): Ceramic Materials, Processes, Properties and Applications. ISTE, London (2007)
14.
Kanchanarat, N., Bandyopadhyay-Ghosh, S., Reaney, I.M., Brook, I.M., Hatton, P.V.: Microstructure and mechanical properties of fluorcanasite glass–ceramics for biomedical applications. J. Mater. Sci. 43, 759–765 (2008)CrossRef
15.
Monmaturapoj, N., Lawita, P., Thepsuwan, W.: Characterisation and properties of lithium disilicate glass ceramics in the SiO2–Li2O–K2O–Al2O3 system for dental applications. Adv. Mat. Sci. Eng. 2013, 11 pp (2013)
16.
Kamardan, M.G., Zaidi, N.H.A., Dalimin, M.N., Zaidi, A.M.A., Jamaludin, S.B., Jamil, M.M.A.: The sintering temperature effect on the shrinkage behavior of cobalt chromium alloy. Am. J. Appl. Sci. 7(11), 1443–1448 (2010)CrossRef
17.
ASTM C-20: Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water. ASTM, West Conshohocken (2000)
18.
Alomayri, T., Shaikh, F.U.A., Low, I.M.: Thermal and mechanical properties of cotton fabric-reinforced geopolymer composites. J. Mat. Sci 48, 6746–6752 (2013)CrossRef
19.
Barbieri, L., Corradi, A., Lancellotti, I.: Bulk and sintered glass–ceramics by recycling municipal incinerator bottom ash. J. Eur. Ceram. Soc. 20, 1637–1643 (2000)CrossRef
20.
Sun, H.Q., Shi, Y.N., Zhang, M.X.: Sliding wear-induced microstructure evolution of nanocrystalline and coarse-grained AZ91D Mg alloy. Wear 266, 666–670 (2009)CrossRef
21.
Ercenk, E., Sen, U., Yilmaz, S.: Structural characterization of plasma sprayed basalt–SiC glass–ceramic coatings. Ceram. Int. 37, 883–889 (2011)CrossRef
22.
Jafarzadeh, K., Zalefi, Z., Ghavidel, B.: The effect of plasma spray parameters on the cavitation erosion of Al2O3–TiO2 coatings. Surf. Coat. Tech. 205, 1850–1855 (2010)CrossRef
23.
Brossard, S., Munroe, P.R., Tran, A.T.T., Hyland, M.M.: Study of the splat formation for plasma sprayed NiCr on aluminum substrate as a function of substrate condition. Surf. Coat. Tech. 204, 2647–2656 (2010)CrossRef
24.
Sabiruddin, K., Bandyopadyay, P.P., Bolelli, G., Lusvarghi, L.: Variation of splat shape with processing conditions in plasma sprayed alumina coatings. J. Mat. Process. Tech. 211, 450–462 (2011)CrossRef
25.
Karamanov, A., Pelino, M.: Evaluation of the degree of crystallisation in glass–ceramics by density measurements. J. Eur. Ceram. Soc. 19, 649–654 (1999)CrossRef
26.
Bartuli, C., Lusvarghi, L., Manfredini, T., Valente, T.: Thermal spraying to coat traditional ceramic substrates: case studies. J. Eur. Ceram. Soc. 27, 1615–1622 (2007)CrossRef
27.
Khater, G.A.: Glass–ceramics in the CaO–MgO–Al2O3–SiO2 system based on industrial waste materials. Jur. Non Crytal. Solid. 356, 3066–3070 (2010)CrossRef
28.
Rawlings, R.D., Wu, J.P., Boccacini, A.R.: Glass–ceramics: their production from wastes—a review. J. Mat. Sci. 41, 733–761 (2006)CrossRef
29.
Erol, M., Kucukbayrak, S., Ersoy-Mericboyu, A.: Production of glass–ceramics obtained from industrial wastes by means of controlled nucleation and crystallization. Chem. Eng. J. 132, 335–343 (2007)CrossRef
30.
Bolelli, G., Cannillo, V., Lusvarghi, L., Manfredini, T., Siligardi, C., Bartuli, C., Loreto, A., Valente, T.: Plasma-sprayed glass–ceramic coatings on ceramic tiles: microstructure, chemical resistance and mechanical properties. J. Eur. Ceram. Soc. 25, 1835–1853 (2005)CrossRef
31.
Ercenk, E., Sen, U., Yilmaz, S.: The erosive wear behavior of basalt based glass and glass–ceramic coatings. Tribo. Int. 52, 94–100 (2012)CrossRef
Metadata
Title
Tribological Properties of SiC-Reinforced Basalt-Based Coatings
Authors
Ediz Ercenk
Ugur Sen
Senol Yilmaz
Publication date
01-11-2014
Publisher
Springer US
Published in
Tribology Letters / Issue 2/2014
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-014-0413-1

Other articles of this Issue 2/2014

Tribology Letters 2/2014 Go to the issue

Original Paper

Boundary Layer Behaviour in Circular EHL Contacts in the Elastic-Piezoviscous Regime

Original Paper

Simulation of the Performance of Various PFPE Lubricants Under Heat Assisted Magnetic Recording Conditions

Original Paper

Effects of pH and Oxidizer on Chemical Mechanical Polishing of AISI 1045 Steel

Original Paper

An Adhesion-Dominated Rolling Friction Regime Unique to Micro-scale Ball Bearings

Original Paper

A Study on the Tribological Behavior of Surface Texturing on Babbitt Alloy under Mixed or Starved Lubrication

Original Paper

Free-Surface Grease Flow on a Rotating Plate

Premium Partners

    Image Credits