Top

Published in:

2023 | OriginalPaper | Chapter

Usage of Controlling Magnetic Fields Effect for Performance Improvement of Electric Arc Welding and Surfacing

Authors : Mohammad Essa Matarneh, Viktor Artiukh

Published in: XV International Scientific Conference “INTERAGROMASH 2022”

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Recent and past studies have shown strong indication that increase of efficiency of submerged electric arc welding and surfacing by means of wire can boost index of electrode fusing. In addition, control of depth and area of fusion with respect to base metal can also be improved. Atomization of structural components of weld bead is also considered. Magnetic control was preferred over mechanical approach of control since it does not involve direct contact of controlling devices with zone of welding (surfacing) and does not require making any significant modifications in standard equipment for welding (surfacing) or its technique. Tests were performed within framework of electric arc welding and surfacing with optimal use of alternate controlling magnetic field by taking induction equal to 20…30 mT in front part of weld pool and with frequency equal to 3…6 Hz. Cluster mechanism of solidification was adopted to be focused on properties in case of foundry and metallurgy. It was reasonable to proceed from the cluster mechanism of metal solidification in weld pool when discussion comes to arc welding and surfacing of metals and alloys under effect of controlling magnetic fields.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Fluctuating Asymmetry Index for Searching for Locations Suitable for Isolating Microorganisms-Destructors of Naphthalene

next chapter Influence of Controlling Magnetic Fields on Metal Structure at Electric Arc Welding and Surfacing

Singh, S., Kumar, R., Goel, P., et al.: Analysis of wear and hardness during surface hardfacing of alloy steel by thermal spraying, electric arc and TIG welding. Mater. Today Proc. 50(5), 1599–1605 (2021). https://doi.org/10.1016/j.matpr.2021.09.122CrossRef

Mazur, V., Artiukh, V., Matarneh, M.I.: Horizontal force during rolling as indicator of rolling technology and technical conditions of main rolling equipment. Procedia Eng. 165, 1722–1730 (2016). https://doi.org/10.1016/j.proeng.2016.11.915CrossRef

Wang, D., Lu, H.: Numerical analysis of internal flow of molten pool in pulsed gas tungsten arc welding using a fully coupled model with free surface. Int. J. Heat Mass Transf. 165, 120572 (2021)CrossRef

Razmyshlyaev, O.D., Ageeva, M.V., Bilyk, O.G. et al.: The influence of the longitudinal control magnetic field on the efficiency of the arc welding process. Autom. Weld. 8, 9–13 (2021). https://doi.org/10.37434/as2021.08.02

Cai, B., Fu, J., Zhao, Y., et al.: Effect of alternating magnetic field on arc plasma characteristics and droplet transfer during narrow gap laser-MIG Hybrid welding. Metals 11(11), 1712 (2021)CrossRef

Üstündağ, Ö., Bakir, N., Gumenyuk, A., et al.: Influence of oscillating magnetic field on the keyhole stability in deep penetration laser beam welding. Opt. Laser Technol. 135, 106715 (2021)CrossRef

Jorge, V.L., Scotti, F.M., Reis, R.P., Scotti, A.: The potential of wire feed pulsation to influence factors that govern weld penetration in GMA welding. Int. J. Adv. Manufact. Technol. 110(9–10), 2685–2701 (2020). https://doi.org/10.1007/s00170-020-06037-8CrossRef

Li, J., Sun, Q., Liu, Y., et al.: Melt flow and microstructural characteristics in beam oscillation superimposed laser welding of 304 stainless steel. J. Manuf. Process. 50, 629–637 (2020)CrossRef

Zhengwu, Z., Xiuquan, M., Chunming, W., et al.: Grain refinement and orientation alternation of 10 mm 316L welds prepared by magnetic field assisted narrow gap laser-MIG hybrid welding. Mater. Charact. 164, 110311 (2020). https://doi.org/10.1016/j.matchar.2020.110311CrossRef

10.

Chen, J., Chen, Q., Wu, C.: Study of high-speed pulsed gas metal arc welding assisted by external magnetic-field. Sci. Technol. Weld. Joining 25(7), 564–570 (2020). https://doi.org/10.1080/13621718.2020.1774994CrossRef

11.

Vyskocil, J., Mayorga-Martinez, C.C., Jablonská, E.: Cancer cells microsurgery via asymmetric bent surface Au/Ag/Ni microrobotic scalpels through a transversal rotating magnetic field. ACS Nano 14(7), 8247–8256 (2020). https://doi.org/10.1021/acsnano.0c01705CrossRef

12.

Corradi, D.R., Bracarense, A.Q., Wu, B., et al.: Effect of magnetic arc oscillation on the geometry of single-pass multi-layer walls and the process stability in wire and arc additive manufacturing. J. Mater. Process. Technol. 283, 116723 (2020). https://doi.org/10.1016/j.jmatprotec.2020.116723CrossRef

13.

Feng, J., Zhang, P., Tian, Y., et al.: Microstructures and mechanical properties of reduced activation ferritic/martensitic steel fabricated by laser melting deposition. Fusion Eng. Des. 173, 112865 (2021). https://doi.org/10.1016/J.FUSENGDES.2021.112865CrossRef

14.

Coetsee, T., De Bruin, F.J.: Improved titanium transfer in submerged arc welding of carbon steel through aluminum addition. Miner. Process. Extr. Metall. Rev. 43(6), 1–4 (2021). https://doi.org/10.1080/08827508.2021.1945595CrossRef

15.

Li, C., Zhou, Y., Shi, X., et al.: Magnetic field edge-effect affecting joint macro-morphology in sheet electromagnetic pulse welding. Mater. Manuf. Process. 35(9), 1040–1050 (2020). https://doi.org/10.1080/10426914.2020.1758332CrossRef

16.

Qiu, Z., Dong, B., Wu, B., et al.: Tailoring the surface finish, dendritic microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy by magnetic arc oscillation. Addit. Manuf. 48, 102397 (2021). https://doi.org/10.1016/J.ADDMA.2021.102397CrossRef

17.

Shlyarov, V., Zagulyaev, D., Chen, X., et al.: Hardness of low-alloy steel obtained by cold metal transfer in the magnetic field. IOP Conf. Ser. Mater. Sci. Eng. 866, 012048 (2020)CrossRef

18.

Braun, M., Wang, X.: A review of fatigue test data on weld toe grinding and weld profiling. Int. J. Fatigue 145, 106073 (2021)CrossRef

19.

Xiao, X., Liu, Q., Hu, M., et al.: Effect of welding sequence and the transverse geometry of the weld overlay on the distribution of residual stress in the weld overlay repair of T23 tubes. Metals 11(4), 568 (2021). https://doi.org/10.3390/met11040568CrossRef

20.

Sada, S.O., Achebo, J., Obahiagbon, K.: Evaluation of the optimal strength and ductility of a mild steel arc welded plate based on the weld design. Weld. Int. (2021). https://doi.org/10.1080/09507116.2021.1987848CrossRef

21.

Wu, H., Chang, Y., Guan, Z., et al.: Arc shape and microstructural analysis of TIG welding with an alternating cusp-shaped magnetic field. J. Mater. Process. Technol. 289, 116912 (2021). https://doi.org/10.1016/j.jmatprotec.2020.116912CrossRef

22.

Xu, L., Tang, X., Zhang, R., et al.: Weld bead characteristics for full-penetration laser welding of aluminum alloy under electromagnetic field support. J. Mater. Process. Technol. 288, 116896 (2021). https://doi.org/10.1016/j.jmatprotec.2020.116896CrossRef

23.

Jain, A.-S., Chang, H., Tang, X., Hinckley, B., Zhang, M.-X.: Refinement of primary carbides in hypereutectic high-chromium cast irons: a review. J. Mater. Sci. 56(2), 999–1038 (2020). https://doi.org/10.1007/s10853-020-05260-8CrossRef

24.

Mohanty, P., Mahapatra, R., Padhi, P., et al.: Ultrasonic cavitation: an approach to synthesize uniformly dispersed metal matrix nanocomposites–A review. Nano-Struct. Nano-Objects 23, 100475 (2020). https://doi.org/10.1016/j.nanoso.2020.100475CrossRef

25.

Eskin, D.G.: Ultrasonic processing of molten and solidifying aluminium alloys: overview and outlook. Mater. Sci. Technol. 33(6), 636–645 (2017). https://doi.org/10.1080/02670836.2016.1162415CrossRef

26.

Zhong, Y., Rännar, L.-E., Liu, L., et al.: Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications. J. S. Mater. 486, 234–245 (2017). https://doi.org/10.1016/j.jnucmat.2016.12.042CrossRef

Title: Usage of Controlling Magnetic Fields Effect for Performance Improvement of Electric Arc Welding and Surfacing
Authors: Mohammad Essa Matarneh
Viktor Artiukh
Publisher: Springer International Publishing
Book: XV International Scientific Conference “INTERAGROMASH 2022”
Print ISBN: 978-3-031-21431-8

Electronic ISBN: 978-3-031-21432-5

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-3-031-21432-5_295

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners