Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Coatings Technology and Research
Published in: Journal of Coatings Technology and Research 6/2017

25-04-2017

Water permeation and corrosion resistance of single- and two-component hydrophobic polysiloxane barrier coatings

Authors: X. Sun, S. Turnage, E. B. Iezzi, Y. Yang, B. Chang, N. C. Muthegowda, S. K. Balijepalli, Nicholas Dhuyvetter, L. P. Wang, K. N. Solanki, K. Rykaczewski

Published in: Journal of Coatings Technology and Research | Issue 6/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The degradation of corrosion preventative coatings contributes to the high cost and time requirements for maintaining structures in harsh environments. However, the development of new hydrophobic coatings holds the promise of extending the usable life of structures in marine environments. In this work, we quantify the barrier properties and corrosion resistance of two novel highly hydrophobic polysiloxane formulations and the legacy silicone alkyd topcoat used on the topside of Navy’s ships, all with haze gray pigmentation. Based on FTIR-ATR and EIS measurements of the pristine coatings, both the single- (1K) and the two-component (2K) polysiloxane provide significantly improved barrier characteristics (lower water diffusion coefficient and capacitance) than the silicone alkyd. These results were confirmed through a 3-month-long immersion corrosion test, which also showed that the 1K and 2K polysiloxane coatings had comparable degradation characteristic and remained highly hydrophobic.
previous article Preparation and evaluation of amphiphilic polymer as fouling-release coating in marine environment
next article A novel acrylate-PDMS composite latex with controlled phase compatibility prepared by emulsion polymerization

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Appendix
Available only for authorised users
Literature
1.
Huffmann, L, Hower, H, “The Emergence of Polysiloxanes and Protective Coatings.” J. Prot. Coat. Linings., 20 5–9 (2003)
2.
Lockwood, P, Cloutier, R, Kinee, D, “Use of Polysiloxane Coatings for Topside Applications on US Navy Ships.” Nav. Eng. J., 128 65–70 (2016)
3.
Andrews, AF, “Polysiloxane Topcoats—A Step Too Far?” Corros. 2005, NACE International, 2005.
4.
Witucki, G, “Next Generation Polysiloxane Hybrid Coatings.” Polym. Paint Colour J., 11 22–24 (2012)
5.
Axelsen, SB, Johnsen, R, Knudsen, OØ, “Internal Stress in Polysiloxane Topcoats.” Corrosion, 66 65005 (2010)CrossRef
6.
Axelsen, SB, Johnsen, R, Knudsen, OØ, “Adhesion Properties of Polysiloxane Topcoats.” Corrosion, 66 125003 (2010)CrossRef
7.
Axelsen, SB, Johnsen, R, Knudsen, OØ, “Mechanical Properties of Polysiloxane Topcoats.” Corrosion, 66 65006 (2010)CrossRef
8.
MIL-PRF-24635E Performance Specification, “Coating Systems, Weather-Resistant, Exterior Use.” (2009)
9.
Kaesler, K, “Polysiloxane Coatings for Corrosion Protection.” In: Khanna, A (ed.) High-Performance Organic Coatings, 1st ed., pp. 225–246. Woodhead Publishing, Cambridge, England (2008)CrossRef
10.
Metroke, TL, Parkhill, RL, Knobbe, ET, “Passivation of Metal Alloys using Sol–Gel-Derived Materials—A Review.” Prog. Org. Coat., 41 233–238 (2001)CrossRef
11.
Wang, Y, Liu, J, Li, M, Wang, Q, Chen, Q, “The Icephobicity Comparison of Polysiloxane Modified Hydrophobic and Superhydrophobic Surfaces Under Condensing Environments.” Appl. Surf. Sci., 385 472–480 (2016)CrossRef
12.
Iezzi, EB, Martin, J, Tagert, J, Slebodnick, P, Wegand, J, Lemieux, E, Spicer, C, “Advanced 2K and 1K Topside Coatings for the U.S. Navy.” DoD-Allied Nations Tech. Corros. Conf. (2011)
13.
Iezzi, EB, “Single-Component Moisture-Curable Coatings Based on N-Substituted Urea Polymers with Extended Chains and Terminal Alkoxysilanes.” US Patent 9139753, 2015.
14.
Iezzi, EB, “Single-Component Coating Having Alkoxysilane-Terminated N-Substituted Urea Resins.” US Patent 9221942, 2015.
15.
Hodson, J, Lander, JA, “The Analysis of Cured Paint Media and a Study of the Weathering of Alkyd Paints by FTIR/PAS.” Polymer, 28 251–256 (1987)CrossRef
16.
Gonalves, GS, Baldissera, AF, Rodrigues, LF, Martini, EMA, Ferreira, CA, “Alkyd Coatings Containing Polyanilines for Corrosion Protection of Mild Steel.” Synth. Met., 161 313–323 (2011)CrossRef
17.
Araujo, WS, Margarit, ICP, Mattos, OR, Fragata, FL, De Lima-Neto, P, “Corrosion Aspects of Alkyd Paints Modified with Linseed and Soy Oils.” Electrochim. Acta, 55 6204–6211 (2010)CrossRef
18.
Perrin, FX, Irigoyen, M, Aragon, E, Vernet, JL, “Evaluation of Accelerated Weathering Tests for Three Paint Systems: A Comparative Study of Their Aging Behaviour.” Polym. Degrad. Stab., 72 115–124 (2001)CrossRef
19.
Cadena, F, Irusta, L, Fernandez-Berridi, MJ, “Performance Evaluation of Alkyd Coatings for Corrosion Protection in Urban and Industrial Environments.” Prog. Org. Coat., 76 1273–1278 (2013)CrossRef
20.
Shi, H, Liu, F, Han, E, Wei, Y, “Effects of Nano Pigments on the Corrosion Resistance of Alkyd Coating.” J. Mater. Sci. Technol., 23 551–558 (2007)
21.
Hansal, WEG, Hansal, S, Pölzler, M, Kornherr, A, Zifferer, G, Nauer, GE, “Investigation of Polysiloxane Coatings as Corrosion Inhibitors of Zinc Surfaces.” Surf. Coat. Technol., 200 3056–3063 (2006)CrossRef
22.
Sarmento, VHV, Schiavetto, MG, Hammer, P, Benedetti, AV, Fugivara, CS, Suegama, PH, Pulcinelli, SH, Santilli, CV, “Corrosion Protection of Stainless Steel by Polysiloxane Hybrid Coatings Prepared Using the Sol–Gel Process.” Surf. Coat. Technol., 204 2689–2701 (2010)CrossRef
23.
Wu, KH, Chao, CM, Yeh, TF, Chang, TC, “Thermal Stability and Corrosion Resistance of Polysiloxane Coatings on 2024-T3 and 6061-T6 Aluminum Alloy.” Surf. Coat. Technol., 201 5782–5788 (2007)CrossRef
24.
Perälä, M, Tikkanen, S, “Composition to be Used in Paints.” US Patent US7351783, 2008.
25.
Yuan, X, Yue, ZF, Chen, X, Wen, SF, Li, L, Feng, T, “EIS Study of Effective Capacitance and Water Uptake Behaviors of Silicone-Epoxy Hybrid Coatings on Mild Steel.” Prog. Org. Coatings., 86 41–48 (2015)CrossRef
26.
ASTM, “Standard Guide for Laboratory Immersion Corrosion Testing of Metals.” ASTM Int., G31–12a 1–10 (2012)
27.
Rykaczewski, K, Mieritz, DG, Liu, M, Ma, Y, Iezzi, EB, Sun, X, Wang, LP, Solanki, KN, Seo, D-K, Wang, RY, “Far-Reaching Geometrical Artefacts due to Thermal Decomposition of Polymeric Coatings Around Focused Ion Beam Milled Pigment Particles.” J. Microsc., 262 316–325 (2016)CrossRef
28.
Nguyen, T, Bentz, D, Byrd, E, “Method for Measuring Water Diffusion in a Coating Applied to a Substrate.” J. Coat. Technol., 67 37–46 (1995)
29.
Linossier, I, Gaillard, F, Romand, M, Feller, J, “Measuring Water Diffusion in Polymer Films on the Substrate by Internal Reflection Fourier Transform Infrared Spectroscopy.” J. Appl. Polym. Sci., 66 2465–2473 (1997)CrossRef
30.
Philippe, L, Sammon, C, Lyon, SB, Yarwood, J, “An FTIR/ATR In Situ Study of Sorption and Transport in Corrosion Protective Organic Coatings: Paper 2. The Effects of Temperature and Isotopic Dilution.” Prog. Org. Coat., 49 315–323 (2004)CrossRef
31.
Philippe, L, Sammon, C, Lyon, SB, Yarwood, J, “An FTIR/ATR In Situ Study of Sorption and Transport in Corrosion Protective Organic Coatings 1. Water Sorption and the Role of Inhibitor Anions.” Prog. Org. Coat., 49 302–314 (2004)CrossRef
32.
Ohman, M, Persson, D, “An Integrated In Situ ATR-FTIR and EIS Set-Up to Study Buried Metal-Polymer Interfaces Exposed to an Electrolyte Solution.” Electrochim. Acta, 52 5159–5171 (2007)CrossRef
33.
Hu, JM, Zhang, JQ, Cao, CN, “Determination of Water Uptake and Diffusion of Cl-ion in Epoxy Primer on Aluminum Alloys in NaCl Solution by Electrochemical Impedance Spectroscopy.” Prog. Org. Coat., 46 273–279 (2003)CrossRef
34.
Amirudin, DTA, Amirudin, A, Thierry, D, “Application of Electrochemical Impedance Spectroscopy to Study the Degradation of Polymer-Coated Metals.” Prog. Org. Coat., 26 1–28 (1995)CrossRef
35.
Bierwagen, G, Tallman, D, Li, J, He, L, Jeffcoate, C, “EIS Studies of Coated Metals in Accelerated Exposure.” Prog. Org. Coat., 46 148–157 (2003)
36.
Hinderliter, BR, Croll, SG, Tallman, DE, Su, Q, Bierwagen, GP, “Interpretation of EIS Data from Accelerated Exposure of Coated Metals Based on Modeling of Coating Physical Properties.” Electrochim. Acta, 51 4505–4515 (2006)CrossRef
37.
Floyd, FL, Avudaiappan, S, Gibson, J, Mehta, B, Smith, P, Provder, T, Escarsega, J, “Using Electrochemical Impedance Spectroscopy to Predict the Corrosion Resistance of Unexposed Coated Metal Panels.” Prog. Org. Coat., 66 8–34 (2009)CrossRef
38.
Ploeger, R, Musso, S, Chiantore, O, “Contact Angle Measurements to Determine the Rate of Surface Oxidation of Artists’ Alkyd Paints During Accelerated Photo-Ageing.” Prog. Org. Coat., 65 77–83 (2009)CrossRef
39.
Damle, VG, Sun, X, Rykaczewski, K, “Can Metal Matrix-Hydrophobic Nanoparticle Composites Enhance Water Condensation by Promoting the Dropwise Mode?” Adv. Mater. Interfaces, 2 1500202 (2015)CrossRef
40.
De Gennes, P-G, Brochard-Wyart, F, Quéré, D, Capillarity and Wetting Phenomena: Drops, Bubbles, Pearls, Waves. Springer Science & Business Media, Berlin (2013)
Metadata
Title
Water permeation and corrosion resistance of single- and two-component hydrophobic polysiloxane barrier coatings
Authors
X. Sun
S. Turnage
E. B. Iezzi
Y. Yang
B. Chang
N. C. Muthegowda
S. K. Balijepalli
Nicholas Dhuyvetter
L. P. Wang
K. N. Solanki
K. Rykaczewski
Publication date
25-04-2017
Publisher
Springer US
Published in
Journal of Coatings Technology and Research / Issue 6/2017
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI
https://doi.org/10.1007/s11998-017-9918-5

Other articles of this Issue 6/2017

Journal of Coatings Technology and Research 6/2017 Go to the issue

OriginalPaper

The preparation of hybrid trimer by cyclo-oligomerization of TDI and HDI and its curing process with polyols to form elastic PU coating

OriginalPaper

Regression modeling of solid mottle in coated papers

OriginalPaper

Synthesis and incorporation of poly(methyl methacrylate) microspheres with UV stabilizers in wood clear coating binder

OriginalPaper

Sol–gel preparation and characterization of antibacterial and self-cleaning hybrid nanocomposite coatings

OriginalPaper

Effect of vanadium additive and phosphating time on anticorrosion, morphology and surface properties of ambient temperature zinc phosphate conversion coatings on mild steel

OriginalPaper

Novel partially bio-based fluorinated polyimides from dimer fatty diamine for UV-cured coating

Premium Partners

    Image Credits