Skip to main content
Top
Published in: Metallurgical and Materials Transactions A 11/2013

01-11-2013

Work of Adhesion in Al/SiC Composites with Alloying Element Addition

Authors: Xin Fang, Tongxiang Fan, Di Zhang

Published in: Metallurgical and Materials Transactions A | Issue 11/2013

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In the current work, a general methodology was proposed to demonstrate how to calculate the work of adhesion in a reactive multicomponent alloy/ceramic system. Applying this methodology, the work of adhesion of Al alloy/SiC systems and the influence of different alloying elements were predicted. Based on the thermodynamics of interfacial reaction and calculation models for component activities, the equilibrium compositions of the melts in Al alloy/SiC systems were calculated. Combining the work of adhesion models for reactive metal/ceramic systems, the work of adhesion in Al alloy/SiC systems both before and after the reaction was calculated. The results showed that the addition of most alloying elements, such as Mg, Si, and Mn, could increase the initial work of adhesion, while Fe had a slightly decreasing effect. As for the equilibrium state, the additions of Cu, Fe, Mn, Ni, Ti, and La could increase the equilibrium work of adhesion, but the additions of Mg and Zn had an opposite effect. Si was emphasized due to its suppressing effect on the interfacial reaction.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Appendix
Available only for authorised users
Literature
2.
go back to reference J.V. Naidich: Prog. Surf. Membr. Sci., 1991, vol. 14, pp. 353-484. J.V. Naidich: Prog. Surf. Membr. Sci., 1991, vol. 14, pp. 353-484.
3.
go back to reference N. Eustathopoulos, M.G. Nicholas, and B. Drevet: Wettability at High Temperatures, 1st ed., Pergamon Press, New York, NY, 1999, pp. 106-47. N. Eustathopoulos, M.G. Nicholas, and B. Drevet: Wettability at High Temperatures, 1st ed., Pergamon Press, New York, NY, 1999, pp. 106-47.
4.
go back to reference N. Eustathopoulos, N. Sobczak, A. Passerone, and K. Nogi: J. Mater. Sci., 2005, vol. 40, pp. 2271-80.CrossRef N. Eustathopoulos, N. Sobczak, A. Passerone, and K. Nogi: J. Mater. Sci., 2005, vol. 40, pp. 2271-80.CrossRef
5.
go back to reference G. Kumar and K.N. Prabhu: Adv. Colloid Interface Sci., 2007, vol. 133, pp. 61-89.CrossRef G. Kumar and K.N. Prabhu: Adv. Colloid Interface Sci., 2007, vol. 133, pp. 61-89.CrossRef
6.
go back to reference J.E. McDonald and J.G. Eberhart: Trans. Metall. Soc. AIME, 1965, vol. 233, pp. 512-17. J.E. McDonald and J.G. Eberhart: Trans. Metall. Soc. AIME, 1965, vol. 233, pp. 512-17.
7.
go back to reference I. Rivollet, D. Chatain, and N. Eustathopoulos: J. Chim. Phys., 1986, vol. 83, pp. 561-7. I. Rivollet, D. Chatain, and N. Eustathopoulos: J. Chim. Phys., 1986, vol. 83, pp. 561-7.
8.
9.
go back to reference J.G. Li, L. Coudurier, and N. Eustathopoulos: J. Mater. Sci., 1989, vol. 24, pp. 1109-16.CrossRef J.G. Li, L. Coudurier, and N. Eustathopoulos: J. Mater. Sci., 1989, vol. 24, pp. 1109-16.CrossRef
10.
go back to reference C.F. Zhang, T.X. Fan, W. Cao, and D. Zhang: Acta Mater., 2009, vol. 57, pp. 3623-32.CrossRef C.F. Zhang, T.X. Fan, W. Cao, and D. Zhang: Acta Mater., 2009, vol. 57, pp. 3623-32.CrossRef
11.
go back to reference L.A. Akssay, C.E. Hoge, and J.A. Pask: J. Phys. Chem., 1974, vol. 78, pp. 1178-83.CrossRef L.A. Akssay, C.E. Hoge, and J.A. Pask: J. Phys. Chem., 1974, vol. 78, pp. 1178-83.CrossRef
12.
go back to reference N. Eustathopoulos: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 152-60.CrossRef N. Eustathopoulos: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 152-60.CrossRef
13.
go back to reference S. Kalogeropoulou, L. Baud, and N. Eustathopoulos: Acta Metall. Mater., 1995, vol. 43, pp. 907-12.CrossRef S. Kalogeropoulou, L. Baud, and N. Eustathopoulos: Acta Metall. Mater., 1995, vol. 43, pp. 907-12.CrossRef
14.
go back to reference C. Rado, S. Kalogeropoulou, and N. Eustathopoulos: Acta Mater., 1999, vol. 47, pp. 461-73.CrossRef C. Rado, S. Kalogeropoulou, and N. Eustathopoulos: Acta Mater., 1999, vol. 47, pp. 461-73.CrossRef
15.
go back to reference H. Fujii, H. Nakae, and K. Okada: Acta Metall. Mater., 1993, vol. 41, pp. 2963-71.CrossRef H. Fujii, H. Nakae, and K. Okada: Acta Metall. Mater., 1993, vol. 41, pp. 2963-71.CrossRef
16.
go back to reference J. Chen, M.Y. Gu, and F.S. Pan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2033-8.CrossRef J. Chen, M.Y. Gu, and F.S. Pan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2033-8.CrossRef
17.
go back to reference S. Li, R.J. Arsenault, and P. Jena: J. Appl. Phys., 1988, vol. 64, pp. 6246-53.CrossRef S. Li, R.J. Arsenault, and P. Jena: J. Appl. Phys., 1988, vol. 64, pp. 6246-53.CrossRef
18.
go back to reference J. Hoekstra and M. Kohyama: Phys. Rev., 1998, vol. 57B, pp. 2334-41. J. Hoekstra and M. Kohyama: Phys. Rev., 1998, vol. 57B, pp. 2334-41.
19.
go back to reference T. Iseki, T. Kameda, and T. Maruyama: J. Mater. Sci., 1984, vol. 19, pp. 1692-98.CrossRef T. Iseki, T. Kameda, and T. Maruyama: J. Mater. Sci., 1984, vol. 19, pp. 1692-98.CrossRef
20.
21.
go back to reference L.M. Tham, M. Gupta, and L. Cheng: Acta Mater., 2001, vol. 49, pp. 3243-53.CrossRef L.M. Tham, M. Gupta, and L. Cheng: Acta Mater., 2001, vol. 49, pp. 3243-53.CrossRef
22.
go back to reference T.X. Fan, D. Zhang, R.J. Wu, T. Shibayanagi, and M. Naka: J. Mater. Sci. Lett., 2002, vol. 21, pp. 1157-61.CrossRef T.X. Fan, D. Zhang, R.J. Wu, T. Shibayanagi, and M. Naka: J. Mater. Sci. Lett., 2002, vol. 21, pp. 1157-61.CrossRef
23.
go back to reference C.J. Simensen: Metall. Trans. A, 1989, vol. 20A, pp. 191. C.J. Simensen: Metall. Trans. A, 1989, vol. 20A, pp. 191.
24.
go back to reference L.L. Oden and R.A. Mccune: Metall. Trans. A, 1987, vol. 18A, pp. 2005-14. L.L. Oden and R.A. Mccune: Metall. Trans. A, 1987, vol. 18A, pp. 2005-14.
25.
go back to reference J.C. Lee, J.Y. Byun, C.S. Oh, H.K. Seok, and H.I. Lee: Acta Mater., 1997, vol. 45, pp. 5303-15.CrossRef J.C. Lee, J.Y. Byun, C.S. Oh, H.K. Seok, and H.I. Lee: Acta Mater., 1997, vol. 45, pp. 5303-15.CrossRef
26.
go back to reference Y.J. Liang and M.C. Che: Thermodynamics Handbook of Inorganic Substance, Northeast University, Shenyang, China, 1996, pp. 449-73. Y.J. Liang and M.C. Che: Thermodynamics Handbook of Inorganic Substance, Northeast University, Shenyang, China, 1996, pp. 449-73.
27.
28.
go back to reference T.X. Fan, G. Yang, and D. Zhang: Mater. Sci. Eng. A, 2005, vol. 394A, pp. 327-38. T.X. Fan, G. Yang, and D. Zhang: Mater. Sci. Eng. A, 2005, vol. 394A, pp. 327-38.
29.
go back to reference A.R. Miedema, P.F. de Chatel, and F.R. De Boer: Physica, 1980, vol. 100, pp. 1-28.CrossRef A.R. Miedema, P.F. de Chatel, and F.R. De Boer: Physica, 1980, vol. 100, pp. 1-28.CrossRef
30.
go back to reference K.S. Yeum, R. Speiser, and D.R. Poirier: Metall. Trans. B, 1989, vol. 20B, pp. 693-703.CrossRef K.S. Yeum, R. Speiser, and D.R. Poirier: Metall. Trans. B, 1989, vol. 20B, pp. 693-703.CrossRef
31.
32.
go back to reference A.K. Niessen, F.R. de Boer, R. Room, P.F. de Chatel, W.C.M. Mattens, and A.R. Miedema: CALPHAD, 1983, vol. 7, pp. 51-70.CrossRef A.K. Niessen, F.R. de Boer, R. Room, P.F. de Chatel, W.C.M. Mattens, and A.R. Miedema: CALPHAD, 1983, vol. 7, pp. 51-70.CrossRef
33.
34.
go back to reference J.C. Viala, P. Fortier, and J. Bouix: J. Mater. Sci., 1990, vol. 25, pp. 1842-50.CrossRef J.C. Viala, P. Fortier, and J. Bouix: J. Mater. Sci., 1990, vol. 25, pp. 1842-50.CrossRef
35.
go back to reference J. Narciso, C. Garcia-Cordovilla, and E. Louis: Mater. Sci. Eng. B, 1992, vol. 15B, pp. 148-55.CrossRef J. Narciso, C. Garcia-Cordovilla, and E. Louis: Mater. Sci. Eng. B, 1992, vol. 15B, pp. 148-55.CrossRef
37.
go back to reference A.S. Isaikin, V.M. Chubarov, B.F. Trefilov, V.A. Silaev, and Y.A. Gorelov: Mater. Sci. Heat Treat., 1980, vol. 22, pp. 815-7.CrossRef A.S. Isaikin, V.M. Chubarov, B.F. Trefilov, V.A. Silaev, and Y.A. Gorelov: Mater. Sci. Heat Treat., 1980, vol. 22, pp. 815-7.CrossRef
38.
go back to reference J.C. Lee, J.Y. Byun, S.B. Park, and H.I. Lee: Acta Mater., 1998, vol. 46, pp. 1771-80.CrossRef J.C. Lee, J.Y. Byun, S.B. Park, and H.I. Lee: Acta Mater., 1998, vol. 46, pp. 1771-80.CrossRef
39.
go back to reference J.L. Murry and A.C. McAlister: Bull. Alloy Phase Diag., 1984, vol. 5, pp. 74-84.CrossRef J.L. Murry and A.C. McAlister: Bull. Alloy Phase Diag., 1984, vol. 5, pp. 74-84.CrossRef
40.
go back to reference J.G. Speight: Lange’s Handbook of Chemistry, 16th ed., McGraw-Hill, New York, NY, 2005, pp. 150-8. J.G. Speight: Lange’s Handbook of Chemistry, 16th ed., McGraw-Hill, New York, NY, 2005, pp. 150-8.
41.
go back to reference F.R. de Boer, R. Boom, W.C.M. Mattens, A.R. Miedema, and A.K. Nissen: Cohesion in Metals: Transition Metal Alloys, North-Holland, Amsterdam, the Netherlands, 1988, pp. 1-101. F.R. de Boer, R. Boom, W.C.M. Mattens, A.R. Miedema, and A.K. Nissen: Cohesion in Metals: Transition Metal Alloys, North-Holland, Amsterdam, the Netherlands, 1988, pp. 1-101.
42.
go back to reference V. Laurent, C. Rado, and N. Eustathopoulos: Mater. Sci. Eng. A, 1996, vol. 205A, pp. 1-8. V. Laurent, C. Rado, and N. Eustathopoulos: Mater. Sci. Eng. A, 1996, vol. 205A, pp. 1-8.
44.
go back to reference E. Candan, H.V. Atkinson, Y. Turen, I. Salaoru, and S. Candan: J. Am. Ceram. Soc., 2011, vol. 94, pp. 867-74.CrossRef E. Candan, H.V. Atkinson, Y. Turen, I. Salaoru, and S. Candan: J. Am. Ceram. Soc., 2011, vol. 94, pp. 867-74.CrossRef
45.
go back to reference W.C. Wang, J.H. Li, H.F. Yan, and B.X. Liu: Scripta Mater., 2007, vol. 56, pp. 975-8.CrossRef W.C. Wang, J.H. Li, H.F. Yan, and B.X. Liu: Scripta Mater., 2007, vol. 56, pp. 975-8.CrossRef
Metadata
Title
Work of Adhesion in Al/SiC Composites with Alloying Element Addition
Authors
Xin Fang
Tongxiang Fan
Di Zhang
Publication date
01-11-2013
Publisher
Springer US
Published in
Metallurgical and Materials Transactions A / Issue 11/2013
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-013-1848-y

Other articles of this Issue 11/2013

Metallurgical and Materials Transactions A 11/2013 Go to the issue

Premium Partners