Skip to main content
Top
Published in: Meccanica 2/2015

01-02-2015 | Experimental Solid Mechanics

A combined analytic and experimental study of the displacement field in a circular ring

Authors: S. K. Kourkoulis, C. F. Markides, E. D. Pasiou

Published in: Meccanica | Issue 2/2015

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

An analytic solution for the displacement field developed in an elastic homogeneous circular ring is described assuming that the ring is subjected to diametral pressure which is not constant but rather it varies according to a parabolic law along the contact arcs. The solution is achieved by using Kolosov’s-Muskhelishvili’s complex potentials method. The length of the contact arcs, which is of crucial importance for the application of the analytic solution, is experimentally determined with the aid of a recently introduced modified version of the reflected caustics technique. The overall validity of the solution is experimentally assessed by comparing its predictions against the respective results obtained experimentally using the Digital Image Correlation (DIC) technique. For the implementation of both experimental protocols the device suggested by the International Society for Rock Mechanics (ISRM) for the standardized realization of the Brazilian-disc test was used. The agreement between theory and experiment is found satisfactory as long as the linearity assumption is not violated. The same is true for the comparison between the experimental data obtained from the Reflected Caustics method with those obtained by the DIC technique concerning the length of the contact arc. Based on the analytic solution some critical aspects of the ring test (proposed as a potential substitute of the Brazilian-disc test almost half a century ago by Hobbs) are explored by studying the variation of the displacements along some strategic paths of the ring.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Appendix
Available only for authorised users
Literature
1.
go back to reference Carneiro FLLB (1943) A new method to determine the tensile strength of concrete. In: Proceedings of the 5th meeting of the Brazilian association for technical rules, 16 September 1943, (in Portuguese) 3d Section, pp 126–129. Carneiro FLLB (1943) A new method to determine the tensile strength of concrete. In: Proceedings of the 5th meeting of the Brazilian association for technical rules, 16 September 1943, (in Portuguese) 3d Section, pp 126–129.
2.
go back to reference Akazawa T (1943) New test method for evaluating internal stress due to compression of concrete (the splitting tension test) (part 1). J Jpn Soc Civ Eng 29:777–787 Akazawa T (1943) New test method for evaluating internal stress due to compression of concrete (the splitting tension test) (part 1). J Jpn Soc Civ Eng 29:777–787
3.
go back to reference Hobbs DW (1964) The tensile strength of rocks. Int J Rock Mech Min Sci 1:385–396 CrossRef Hobbs DW (1964) The tensile strength of rocks. Int J Rock Mech Min Sci 1:385–396 CrossRef
4.
go back to reference Hobbs DW (1965) An assessment of a technique for determining the tensile strength of rock. Br J Appl Phys 16:259–268 ADSCrossRef Hobbs DW (1965) An assessment of a technique for determining the tensile strength of rock. Br J Appl Phys 16:259–268 ADSCrossRef
5.
go back to reference Ripperger E, Davis N (1947) Critical stresses in a circular ring (paper no 2308). Trans Am Soc Civ Eng 112:619–627 Ripperger E, Davis N (1947) Critical stresses in a circular ring (paper no 2308). Trans Am Soc Civ Eng 112:619–627
6.
go back to reference Hondros G (1959) The evaluation of Poisson’s ratio and the modulus of materials of a low tensile resistance by the Brazilian (indirect tensile) test with particular reference to concrete. Aust J Appl Sci 10:243–268 Hondros G (1959) The evaluation of Poisson’s ratio and the modulus of materials of a low tensile resistance by the Brazilian (indirect tensile) test with particular reference to concrete. Aust J Appl Sci 10:243–268
7.
go back to reference Timoshenko SP, Goodier JN (1951) Theory of elasticity, 2nd edn. Engineering societies monographs. McGraw-Hill, New York MATH Timoshenko SP, Goodier JN (1951) Theory of elasticity, 2nd edn. Engineering societies monographs. McGraw-Hill, New York MATH
8.
go back to reference Filon LNG (1924) The stresses in a circular ring. Selected engineering papers, vol 12. The Institution, London. Institution of Civil Engineers (Great Britain) Filon LNG (1924) The stresses in a circular ring. Selected engineering papers, vol 12. The Institution, London. Institution of Civil Engineers (Great Britain)
9.
go back to reference Jaeger JC, Hoskins ER (1966) Stresses and failure in rings of rock loaded in diametral tension or compression. Br J Appl Phys 17:685–692 ADSCrossRef Jaeger JC, Hoskins ER (1966) Stresses and failure in rings of rock loaded in diametral tension or compression. Br J Appl Phys 17:685–692 ADSCrossRef
10.
go back to reference Yang Q, Gao C-F (2013) Dynamic stress analysis of a functionally graded material plate with a circular hole. Meccanica 48:91–101 CrossRefMATHMathSciNet Yang Q, Gao C-F (2013) Dynamic stress analysis of a functionally graded material plate with a circular hole. Meccanica 48:91–101 CrossRefMATHMathSciNet
11.
go back to reference Zirakashvili N (2013) On the numerical solution of some two-dimensional boundary-contact delocalization problems. Meccanica 48:1791–1804 CrossRefMATHMathSciNet Zirakashvili N (2013) On the numerical solution of some two-dimensional boundary-contact delocalization problems. Meccanica 48:1791–1804 CrossRefMATHMathSciNet
12.
go back to reference Tokovyy YV, Hung KM, Ma CC (2010) Determination of stresses and displacements in a thin annular disk subjected to diametral compression. J Math Sci 165(3):342–354 CrossRef Tokovyy YV, Hung KM, Ma CC (2010) Determination of stresses and displacements in a thin annular disk subjected to diametral compression. J Math Sci 165(3):342–354 CrossRef
13.
go back to reference Fischer MP, Elsworth D, Alley RB, Engelder T (1996) Finite element analysis of the modified ring test for determining mode I fracture toughness. Int J Rock Mech Min Sci 33(1):1–15 CrossRef Fischer MP, Elsworth D, Alley RB, Engelder T (1996) Finite element analysis of the modified ring test for determining mode I fracture toughness. Int J Rock Mech Min Sci 33(1):1–15 CrossRef
14.
go back to reference Zhu WC, Chau KT, Tang CA (2004) Numerical simulation on failure patterns of rock discs and rings subject to diametral line loads. Key Eng Mater 261(3):1517–1522 CrossRef Zhu WC, Chau KT, Tang CA (2004) Numerical simulation on failure patterns of rock discs and rings subject to diametral line loads. Key Eng Mater 261(3):1517–1522 CrossRef
15.
go back to reference Dimopoulou MA, Kaklis KN, Agioutantis ZA (2004) A numerical and experimental study of marble discs with a central hole under diametral compression (ring test). In: Agioutantis ZA, Komnitsas PA (eds) Advances in mineral resources management and environmental geotechnology, Heliotopos Conferences, Athens, pp 31–36 Dimopoulou MA, Kaklis KN, Agioutantis ZA (2004) A numerical and experimental study of marble discs with a central hole under diametral compression (ring test). In: Agioutantis ZA, Komnitsas PA (eds) Advances in mineral resources management and environmental geotechnology, Heliotopos Conferences, Athens, pp 31–36
16.
go back to reference Liu KY, Liu BG, Liu WB (2008) Numerical study on size effect of ring specimen under Brazilian test. In: Cai M, Wang J (eds) Boundaries of rock mechanics—recent advances and challenges for the 21st century. Taylor & Francis, London, pp 121–126 CrossRef Liu KY, Liu BG, Liu WB (2008) Numerical study on size effect of ring specimen under Brazilian test. In: Cai M, Wang J (eds) Boundaries of rock mechanics—recent advances and challenges for the 21st century. Taylor & Francis, London, pp 121–126 CrossRef
17.
go back to reference Staroselsky A (1999) The express method of determining the fracture toughness of brittle materials. Int J Fract 98:L47–L52 CrossRef Staroselsky A (1999) The express method of determining the fracture toughness of brittle materials. Int J Fract 98:L47–L52 CrossRef
18.
go back to reference Hudson JA (1969) Tensile strength and the ring test. Int J Rock Mech Min Sci 6:91–97 CrossRef Hudson JA (1969) Tensile strength and the ring test. Int J Rock Mech Min Sci 6:91–97 CrossRef
19.
go back to reference Hudson JA, Brown ET, Rummel F (1972) The controlled failure of rock discs and rings loaded in diametral compression. Int J Rock Mech Min Sci 9:241–248 CrossRef Hudson JA, Brown ET, Rummel F (1972) The controlled failure of rock discs and rings loaded in diametral compression. Int J Rock Mech Min Sci 9:241–248 CrossRef
20.
go back to reference Mellor M, Hawkes I (1971) Measurement of tensile strength by diametral compression of discs and annuli. Eng Geol 5:173–225 CrossRef Mellor M, Hawkes I (1971) Measurement of tensile strength by diametral compression of discs and annuli. Eng Geol 5:173–225 CrossRef
21.
go back to reference ISRM (1978) Suggested methods for determining tensile strength of rock materials. Int J Rock Mech Min Sci Geomech Abstr 15(3):99–103 CrossRef ISRM (1978) Suggested methods for determining tensile strength of rock materials. Int J Rock Mech Min Sci Geomech Abstr 15(3):99–103 CrossRef
22.
go back to reference Kourkoulis SK, Markides CF, Chatzistergos PE (2012) The Brazilian disc under parabolically varying load: theoretical and experimental study of the displacement field. Int J Solids Struct 49(7–8):959–972 CrossRef Kourkoulis SK, Markides CF, Chatzistergos PE (2012) The Brazilian disc under parabolically varying load: theoretical and experimental study of the displacement field. Int J Solids Struct 49(7–8):959–972 CrossRef
23.
go back to reference Kourkoulis SK, Markides CF, Chatzistergos PE (2013) The standardized Brazilian disc test as a contact problem. Int J Rock Mech Min Sci 57:123–141 Kourkoulis SK, Markides CF, Chatzistergos PE (2013) The standardized Brazilian disc test as a contact problem. Int J Rock Mech Min Sci 57:123–141
24.
go back to reference Markides CF, Kourkoulis SK (2012) The stress field in a standardized Brazilian disc: the influence of the loading type acting on the actual contact length. Rock Mech Rock Eng 45(2):145–158 ADSCrossRef Markides CF, Kourkoulis SK (2012) The stress field in a standardized Brazilian disc: the influence of the loading type acting on the actual contact length. Rock Mech Rock Eng 45(2):145–158 ADSCrossRef
25.
go back to reference Kolosov GV (1931) Sur une application des formules de M. Schwarz, de M. Villat et de M. Dini au problèm plan de l’èlasticitè. C R Séances Acad Sci 193(14):389 Kolosov GV (1931) Sur une application des formules de M. Schwarz, de M. Villat et de M. Dini au problèm plan de l’èlasticitè. C R Séances Acad Sci 193(14):389
26.
go back to reference Muskhelishvili NI (1963) Some basic problems of the mathematical theory of elasticity. Noordhoff, Groningen MATH Muskhelishvili NI (1963) Some basic problems of the mathematical theory of elasticity. Noordhoff, Groningen MATH
27.
go back to reference Markides CF, Kourkoulis SK (2013) Revisiting the reflected caustics method: the accurate shape of the “initial curve”. Engineering Transactions (Accepted for publication) August 2013 Markides CF, Kourkoulis SK (2013) Revisiting the reflected caustics method: the accurate shape of the “initial curve”. Engineering Transactions (Accepted for publication) August 2013
28.
go back to reference Theocaris PS (1970) Local yielding around a crack tip in plexiglas. J Appl Mech 37:409–415 CrossRef Theocaris PS (1970) Local yielding around a crack tip in plexiglas. J Appl Mech 37:409–415 CrossRef
29.
go back to reference Theocaris PS, Gdoutos EE (1972) An optical method for determining opening-mode and edge sliding-mode stress intensity factors. J Appl Mech 39:91–97 CrossRef Theocaris PS, Gdoutos EE (1972) An optical method for determining opening-mode and edge sliding-mode stress intensity factors. J Appl Mech 39:91–97 CrossRef
30.
go back to reference Pazis DN, Agioutantis Z, Kourkoulis SK (2011) The optical method of reflected caustics applied for a plate with a central hole: critical points and limitations. Strain 47(6):489–498 CrossRef Pazis DN, Agioutantis Z, Kourkoulis SK (2011) The optical method of reflected caustics applied for a plate with a central hole: critical points and limitations. Strain 47(6):489–498 CrossRef
31.
go back to reference Kourkoulis SK, Markides CF (2013) Stresses and displacements in a circular ring under parabolic diametral compression (Submitted) Kourkoulis SK, Markides CF (2013) Stresses and displacements in a circular ring under parabolic diametral compression (Submitted)
32.
go back to reference Vardoulakis I, Kourkoulis SK, Zambas C (1998) Modeling of the mechanical behaviour of a conchyliates shellstone. In: Evangelista A, Picarelli L (eds) The geotechnics of hard soils-soft rocks. Balkema, Rotterdam, pp 911–922 Vardoulakis I, Kourkoulis SK, Zambas C (1998) Modeling of the mechanical behaviour of a conchyliates shellstone. In: Evangelista A, Picarelli L (eds) The geotechnics of hard soils-soft rocks. Balkema, Rotterdam, pp 911–922
33.
go back to reference Papadopoulos GA (2011) New formula of experimental stress intensity factor evaluation by caustics. Int J Fract 171:79–84 CrossRefMATH Papadopoulos GA (2011) New formula of experimental stress intensity factor evaluation by caustics. Int J Fract 171:79–84 CrossRefMATH
34.
go back to reference Papadopoulos GA (2012) Evaluation of concentrated oblique load at the apex of a wedge by the method of caustics. Open Mech Eng J 6:90–99 CrossRef Papadopoulos GA (2012) Evaluation of concentrated oblique load at the apex of a wedge by the method of caustics. Open Mech Eng J 6:90–99 CrossRef
35.
go back to reference Theocaris PS, Gdoutos EE (1976) Surface topography by caustics. Appl Opt 15(6):1629–1638 ADSCrossRef Theocaris PS, Gdoutos EE (1976) Surface topography by caustics. Appl Opt 15(6):1629–1638 ADSCrossRef
36.
go back to reference Theocaris PS, Gdoutos EE (1977) Distance measuring based on caustics. Appl Opt 16(3):722–728 ADSCrossRef Theocaris PS, Gdoutos EE (1977) Distance measuring based on caustics. Appl Opt 16(3):722–728 ADSCrossRef
37.
go back to reference Theocaris PS, Papadopoulos GA (1982) The influence of biaxiality of loading on the form of caustics in cracked plates. Acta Mech 44(3–4):201–222 CrossRef Theocaris PS, Papadopoulos GA (1982) The influence of biaxiality of loading on the form of caustics in cracked plates. Acta Mech 44(3–4):201–222 CrossRef
38.
go back to reference Manogg P (1964) Schattenoptische Messung der spezifischen Bruchenergie waehrend des Bruchvorgangs bei Plexiglas. In: Prins JA (ed) Proceedings of the international conference on physics of noncrystalline solids, Delft, The Netherlands, pp 481–490 Manogg P (1964) Schattenoptische Messung der spezifischen Bruchenergie waehrend des Bruchvorgangs bei Plexiglas. In: Prins JA (ed) Proceedings of the international conference on physics of noncrystalline solids, Delft, The Netherlands, pp 481–490
39.
go back to reference Manogg P (1966) Investigation of the rupture of a plexiglas plate by means of an optical method involving high speed filming of the shadows originating around holes drilled in the plate. Int J Fract 2:604–613 CrossRef Manogg P (1966) Investigation of the rupture of a plexiglas plate by means of an optical method involving high speed filming of the shadows originating around holes drilled in the plate. Int J Fract 2:604–613 CrossRef
40.
go back to reference Theocaris PS (1977) The load distribution in the generalized contact problem by caustics. In: Proceedings of the 3rd national Congress on theoretical and applied mechanics, Varna, Bulgaria, 13–16 September 1977, vol III, pp 105–143 Theocaris PS (1977) The load distribution in the generalized contact problem by caustics. In: Proceedings of the 3rd national Congress on theoretical and applied mechanics, Varna, Bulgaria, 13–16 September 1977, vol III, pp 105–143
41.
go back to reference Theocaris PS, Stassinakis CA (1978) The elastic contact of two disks by the method of caustics. Exp Mech 18(11):409–415 CrossRef Theocaris PS, Stassinakis CA (1978) The elastic contact of two disks by the method of caustics. Exp Mech 18(11):409–415 CrossRef
42.
go back to reference Kourkoulis SK, Markides CF, Bakalis G (2013) Smooth elastic contact of cylinders by caustics: the contact length in the Brazilian-disc test. Arch Mech 65(4):313–338 MATH Kourkoulis SK, Markides CF, Bakalis G (2013) Smooth elastic contact of cylinders by caustics: the contact length in the Brazilian-disc test. Arch Mech 65(4):313–338 MATH
43.
go back to reference Chu T, Ranson W, Sutton M (1985) Applications of digital-image-correlation techniques to experimental mechanics. Exp Mech 25:232–244 CrossRef Chu T, Ranson W, Sutton M (1985) Applications of digital-image-correlation techniques to experimental mechanics. Exp Mech 25:232–244 CrossRef
44.
go back to reference Sutton MA, Cheng M, Peters WH, Chao YJ, McNeill SR (1986) Application of an optimized digital correlation method to planar deformation analysis. Image Vis Comput 4:143–150 CrossRef Sutton MA, Cheng M, Peters WH, Chao YJ, McNeill SR (1986) Application of an optimized digital correlation method to planar deformation analysis. Image Vis Comput 4:143–150 CrossRef
45.
go back to reference Sutton MA, McNeill SR, Helm JD, Chao YJ (2000) Advances in two-dimensional and three-dimensional computer vision. In: Rastogi PK (ed) Photomechanics. Topics Appl Phys, vol 77. Springer, Berlin, pp 323–372 CrossRef Sutton MA, McNeill SR, Helm JD, Chao YJ (2000) Advances in two-dimensional and three-dimensional computer vision. In: Rastogi PK (ed) Photomechanics. Topics Appl Phys, vol 77. Springer, Berlin, pp 323–372 CrossRef
46.
go back to reference McCormick N, Lord J (2010) Digital image correlation. Mater Today 13(12):52–54 CrossRef McCormick N, Lord J (2010) Digital image correlation. Mater Today 13(12):52–54 CrossRef
Metadata
Title
A combined analytic and experimental study of the displacement field in a circular ring
Authors
S. K. Kourkoulis
C. F. Markides
E. D. Pasiou
Publication date
01-02-2015
Publisher
Springer Netherlands
Published in
Meccanica / Issue 2/2015
Print ISSN: 0025-6455
Electronic ISSN: 1572-9648
DOI
https://doi.org/10.1007/s11012-013-9846-0

Other articles of this Issue 2/2015

Meccanica 2/2015 Go to the issue

Experimental Solid Mechanics

Preface

Premium Partners