Top

The International Journal of Advanced Manufacturing Technology

Published in:

23-08-2022 | ORIGINAL ARTICLE

A control method with considering error coupling in milling multi-feature thin-walled parts

Authors: Xiaoyan Zuo, Yin Zhou, Tao Xiong, Chi Zhang, Chengjun Zhang, Xiangyang Zhou

Published in: The International Journal of Advanced Manufacturing Technology | Issue 3-4/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Multiple features of thin-walled parts have position-dependent and dimension association, which means that multi-feature machining errors can affect each other. They may be coupled in multiple processes. Therefore, multi-feature couple effect plays a significant impact on thin-walled parts machining process in some cases. The most existing error coupling analysis methods ignore the error influence between features. To overcome this problems, Multi-feature machining is investigated thoroughly, error coupling method is proposed to consider these effects in this paper. According to the influence mode of multi-feature machining, error coupling is decomposed into geometric interaction and machining interaction, and analyze individual influence mode. The geometric interaction is tolerance/datum interactions. The machining interaction is generated from machining operations. A method based on SDT (small displacement torsors) and transformation of the coordinate systems is employed and integrated to the comprehensive error model. Besides, a compensation method by adjusting the pose is proposed. Finally, a case study is performed to validate the proposed method.

previous article The effect of ultrasonic amplitude on the performance of ultrasonic vibration-assisted EDM micro-hole machining

next article Study on surface integrity and ductile cutting of PV polycrystalline silicon and wear mechanisms of electroplated diamond wire

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Smith S, Dvorak D (1998) Tool path strategies for high speed milling aluminum workpieces with thin webs. Mechatronics 8(4):291–300CrossRef

Pal P, Tigga AM, Kumar A (2005) A strategy for machining interacting features using spatial reasoning. Int J Mach Tools Manuf 45(3):269–278CrossRef

Givehchi M, Haghighi A, Wang L (2015) Generic machining process sequencing through a revised enriched machining feature concept. J Manuf Syst 37:564–575CrossRef

Ma J, He G, Liu Z, Qin F, Chen S, Zhao X (2018) Instantaneous cutting-amount planning for machining deformation homogenization based on position-dependent rigidity of thin-walled surface parts. J Manuf Process 34:401–411CrossRef

Dipper T, Xu X, Klemm P (2011) Defining, recognizing and representing feature interactions in a feature-based data model. Robot Comput-Integr Manuf 27(1):101–114CrossRef

Mieczyslaw MD, Siemiatkowski S (2018) Machining process sequencing and machine assignment in generative feature-based CAPP for mill-turn parts. J Manuf Syst 48:49–62CrossRef

Wan XJ, Xiong CH, Wang XF, Zhang XM, Xiong YL (2010) A machining-feature-driven approach to locating scheme in multi-axis milling. Int J Mach Tools Manuf 50(1):42–50CrossRef

Armillotta A (2016) Tolerance analysis considering form errors in planar datum features. Procedia CIRP 43:64–69CrossRef

Yuguang Wu (2018) The calculation method of the inspection tolerance zone when two datum features apply MMC/LMC. Procedia CIRP 75:297–302CrossRef

10.

Deshpande A, Madhavan V (2012) A novel approach to accelerate attainment of thermal steady state in coupled thermomechanical analysis of machining. Int J Heat Mass Transf 55(13):3869–3884CrossRef

11.

Niederwestberg D, Denkena B (2014) Simulation of thermal and mechanical workpiece load. CIRP J Manuf Sci Technol 7(4):315–323CrossRef

12.

Cerutti X, Mocellin K, Hassini S, Blaysat B, Duc E (2017) Methodology for aluminium part machining quality improvement considering mechanical properties and process conditions. CIRP J Manuf Sci Technol 18:18–38CrossRef

13.

Rai JK, Xirouchakis P (2008) Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components. Int J Mach Tools Manuf 48(6):629–643CrossRef

14.

Sun C, Xiu S, Hong Y, Kong X, Lu Y (2020) Prediction on residual stress with mechanical-thermal and transformation coupled in DGH. Int J Mech Sci 179:105629

15.

Shichang Du, Yao X, Huang D, Wang M (2015) Three-dimensional variation propagation modeling for multistage turning process of rotary workpieces. Comput Ind Eng 82:41–53CrossRef

16.

Zhengshu S, Gaurav A, Jami J, Shah J, Davidson K (2005) A comparative study of tolerance analysis methods. J Comput Inf Sci Eng 5(3):247–256CrossRef

17.

Liu J, Ma C, Gui H, Wang S (2022) Simultaneous geometric and thermal error control of gear profile grinder based on analytical correlation between tooth surface error and position error of grinding wheel/workpiece. Mech Mach Theory 169:104639

18.

Liu Xu, Li Y, Li Q (2014) A machining feature information model for dynamic manufacturing planning. Procedia CIRP 25:100–105CrossRef

19.

Huang W, Lin J, Bezdecny M, Kono Z, Ceglarek D (2007) Stream-of-variation modeling—part I : a generic three-dimensional variation model for rigid-body assembly in single station assembly processes. Asme Int Manuf Sci Eng Conf

20.

Huang W, Lin J, Kong Z, Ceglarek D (2007) Stream-of-variation (SOVA) modeling II: a generic 3D variation model for rigid body assembly in multistation assembly processes. J Manuf Sci Eng 129(4):821–831CrossRef

21.

Ge G, Zhengchun Du, Feng X, Yang J (2020) An integrated error compensation method based on on-machine measurement for thin web parts machining. Precis Eng 63:206–213CrossRef

22.

Du Z, Ge G, Xiao Y, Feng X, Yang J (2021) Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement. Int J Adv Manuf Technol 115:3645–3656CrossRef

23.

Li G, Shichang Du, Huang D, Zhao C, Deng Y (2019) Elastic mechanics-based fixturing scheme optimization of variable stiffness structure workpieces for surface quality improvement. Precis Eng 56:343–363CrossRef

24.

Li B, Zuo XY, Yang J, Jiang X, Ni J (2014) Interactive influence of linked characteristics during machining of thin-walled parts. J Int J Adv Manuf Technol 72(9–12):1727–1734CrossRef

25.

Ratava J, Penttilä S, Lund H, Lohtander M, Kah P, Ollikainen M, Varis J (2019) Quality assurance and process control in virtual reality. Procedia Manuf 38:497–504CrossRef

Title: A control method with considering error coupling in milling multi-feature thin-walled parts
Authors: Xiaoyan Zuo
Yin Zhou
Tao Xiong
Chi Zhang
Chengjun Zhang
Xiangyang Zhou
Publication date: 23-08-2022
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 3-4/2022
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-09959-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2022

Numerical simulation of DC casting of large-size rare earth magnesium alloy ingot under low-frequency electromagnetic field

Online chatter monitor system based on rapid detection method and wireless communication

Effect of milling time on the structural, microstructure, and magnetic properties of nanocrystalline Fe90Sb10 powders obtained by high-energy ball milling

Optimization of EDM process parameters based on variable-fidelity surrogate model

Sensitivity analysis for springback of QSTE700 high-strength steel rectangular welded tube to material parameters in rotary draw bending

Optimization of the parameters of the selective laser sintering for the formation of PA12 samples by the Taguchi method

Premium Partners