Top

Polymer Science, Series D

Published in:

01-09-2023

A Sealant Based on SKTN-A Low-Molecular-Weight Dimethylsiloxane Rubber Modified by Boron Nitride

Authors: V. Yu. Chukhlanov, O. G. Selivanov, N. V. Chukhlanova

Published in: Polymer Science, Series D | Issue 3/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The submitted paper reports the results of studies on the modification of SKTN-A low-molecular-weight dimethylsiloxane rubber with boron nitride. The effect of boron nitride on the physicomechanical, thermophysical, and electrical properties of the sealing composition is demonstrated. The dependence of the thermal-conductivity coefficient, specific electrical resistance, and other characteristics on the modifier content is established.

previous article Properties and Functionality of VK-100 Conductive Adhesive

next article Theoretical Substantiation of the Use of Natural Mineral Modifiers for Synthetic Resins

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

C. Robeyns, L. Picard, and G. François, “Synthesis, characterization and modification of silicone resins. An “augmented review”,” Prog. Org. Coat. 125, 287–315 (2018). https://doi.org/10.1016/J.PORGCOAT.2018.03.025

A. J. O’Lenick Jr., “Protective coating based on organic silicon polymer of ladder structure nanostructured with alkoxysilane. Silicone polymers: new possibilities in nanotechnology,” ACS Symp. Ser. 96, 165–175 (2007). https://doi.org/10.1021/bk-2007-0961.ch009CrossRef

V. Yu. Chukhlanov and E. N. Tereshina, “Polyorganosiloxane–based heat-resistant sealant with improved dielectric characteristics,” Polym. Sci. Ser. 49, 288–291. https://doi.org/10.1134/S1811238207030186

M. V. Grishin, T. I. Zelyakova, L. N. Krutov, and S. O. Ruban, “Studies of the moisture-proof properties of the “Viksint K-68” compound (rubber-like),” Peterburg. Zh. Elektron. 2, 3–7 (2017). LIBRARY ID: 26498403.

N. P. Andreeva, E. O. Valevin, and M. R. Pavlov, “Storage of the properties of functional materials of aviation technology in a tropical humid climate,” Klei. Germetiki. Tekhnol., No. 4, 6–11 (2022). https://doi.org/10.31044/1813-7008-2022-0-4-6-11CrossRef

M. A. Ilyukhina and V. V. Timonin, “Study of performance characteristics of organosilicon sealants of “cold” vulcanization at elevated temperatures (up to +400°C) and the ways to their improvement,” Trudy VIAM, No. 3, 44–53 (2022). https://doi.org/10.18577/2307-6046-2022-0-3-44-53CrossRef

D. V. Kharitonov, A. A. Anashkina, M. S. Motornova, and L. A. Shmidt, “Technological aspects of the preparation of organosilicon sealant Viksint i-2-28NT for use in load-bearing structures of ceramic products,” Klei. Germetiki. Tekhnol. No. 1, 26–31 (2018). eLIBRARY ID: 32252058.

H. He, M. A. Blanco, and R. Pandey, “Electronic and thermodynamic properties of Ga₂O₃,” Appl. Phys. Lett. 88, 9041–9042 (2006).CrossRef

J. D. Caldwell, I. Aharonovich, G. Cassabois, et al., “Photonics with hexagonal boron nitride,” Nat. Rev. Mater. 4, 552–567 (2019). https://doi.org/10.1038/s41578-019-0124-1CrossRef

10.

X. Duan, Zh. Yang, L. Chen, Zh. Tian, D. Cai, Y. Wang, D. Jia, and Yu. Zhou, “Review on the properties of hexagonal boron nitride matrix composite ceramics,” J. Eur. Cer. Soc. 36, 3725–3737 (2016). https://doi.org/10.1016/j.jeurceramsoc.2016.05.007

11.

Operating manual for thermal conductivity meter ITP-100. http://www.electronpribor.ru/files/products/itp_100_250_zond1.pdf.

12.

V. Chukhlanov, O. Selivanov, and N. Chukhlanova, “Thermal stability of highly filled low density spheroplastics based on polydimethylsiloxane binders and problems of their improvement,” J. Chem. Technol. Metall. 55, 990–994 (2020).

13.

D. Bloor, Electrical Properties of Polymers (Univ. Press, Cambridge, 2008).

14.

A. A. Volkov, S. I. Podshibyakin, and A. M. Zakharov, “Improving the adhesion of organosilicon compounds using the example of Viksint PK-68 sealant to a deformable aluminum alloy substrate. Chemistry, physics, biology, mathematics: theoretical and applied research,” in Proceedings of the 41st International Scientific and Practical Conference, Moscow, 2020, pp. 35–39.

15.

M. L. Kerber, V. M. Vinogradov, G. S. Golovkin, and Yu. A. Gorbatkina, Polymer Composite Materials: Structure, Properties, Technology, Ed. by A. A. Berlin (Professiya, St. Petersburg, 2014) [in Russian].

Title: A Sealant Based on SKTN-A Low-Molecular-Weight Dimethylsiloxane Rubber Modified by Boron Nitride
Authors: V. Yu. Chukhlanov
O. G. Selivanov
N. V. Chukhlanova
Publication date: 01-09-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 3/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223030097

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2023

Criteria for the Operational and Economic Estimation of the Efficiency of Epoxy–Sand Composites of Different Compositions as Abrasive-Resistant Coatings of Parts of Tillow-Tool Implements

The Effect of the Dispersion and Texture of Filler Particles and Flow Modes on the Rheological Properties of an Oligomer Composition

Isoquinoline Alkaloids of Amaryllidaceae Crinane Alkaloids

Determination of Temperature–Time Intervals for the Formation of Carbon Mesophase for Some Types of Coking Feedstock

Thermal Behavior of Copolymers of Maleimide with Alkyl Methacrylates

Properties and Functionality of VK-100 Conductive Adhesive

Premium Partners