Top

Arabian Journal for Science and Engineering

Published in:

01-02-2022 | Research Article-Computer Engineering and Computer Science

Adiabatic Configurable Reversible Synthesizer for 5G Applications

Authors: R. M. Bommi, Mary Subaja Christo

Published in: Arabian Journal for Science and Engineering | Issue 2/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Electronic semiconductor manufacturers have reduced chip area, allowing for rapid growth in the field of electronics. Power dissipation has become a huge concern in the electronics industry as a result of leakage currents; as a result, researchers are actively attempting to develop solutions to reduce it. As adiabatic logic circuits feature a lot of power recycling and energy recovery, using adiabatic technology to develop low-power circuits is one such promising option. Reversible Logic Gates (RLG) implementation is vital in creating low-power circuits for 5G applications since large reversible logic circuits are fortified together in a single logical application. The frequency is a factor that is taken into account when determining the topological conclusion of reversible gates, with a focus on interference and power consumption in the research. The adiabatic Configurable Reversible Synthesizer (CRS) has a well-structured architecture. The Sweep circuit prefers a tuning process that takes less time to process. This paper assesses the efficiency of a novel Quantum Adiabatic CRS in terms of power and energy savings. With a 27.24 percent improvement over a commercially available Direct Data Synthesizer, the innovative design method achieves low-power dissipation.

previous article ILCAN: A New Vision Attention-Based Late Blight Disease Localization and Classification

next article Optimization, Modeling and Implementation of Plant Water Consumption Control Using Genetic Algorithm and Artificial Neural Network in a Hybrid Structure

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Bommi, R.M., Selvakumar, R.S.: A Survey on Adiabatic Logic Families for Implementing Reversible Logic Circuits. In: 2018 IEEE International Conference on Computational Intelligence and Computing Research, ICCIC 2018 (2018)

Bhati, P., Rizvi, N.Z.: Adiabatic logic: An alternative approach to low power application circuits. Int. Conf. Electr. Electron. Optim. Tech. ICEEOT 2016. 4255–4260 (2016). https://doi.org/10.1109/ICEEOT.2016.7755521

Wang, P.; Zhang, Y.; Yang, J.: Design and implementation of modified DDS based on FPGA. Procedia Comput. Sci. 131, 261–266 (2018). https://doi.org/10.1016/j.procs.2018.04.212CrossRef

Liu, J.; Feng, J.: Design of embedded digital image processing system based on ZYNQ. Microprocess. Microsyst. 83, 104005 (2021). https://doi.org/10.1016/j.micpro.2021.104005CrossRef

Wang, M., Wen, Z., Chen, L., Zhang, Y.: A novel DLL-based configurable frequency synthesizer. 2008 IEEE Int. Conf. Neural Networks Signal Process. ICNNSP. 303–306 (2008). https://doi.org/10.1109/ICNNSP.2008.4590361

Czechowski, T.; Baranowski, M.; Woźniak-Braszak, A.; Jurga, K.; Jurga, J.; Kędzia, P.: The Instrument set for generating fast adiabatic passage. Appl. Magn. Reson. 43, 331–340 (2012). https://doi.org/10.1007/s00723-012-0372-3CrossRef

Landauer, R.: Irreversibility and Heat Generation. Ibm J. 183–191 (1961)

Fredkin, E.; Toffoli, T.: Logic 1 edward fredkin and tommaso toffoli. Int. J. 21, 219–253 (1982)MATH

Kerntopf, P.; Perkowski, M.; Khan, M.H.A.: On universality of general reversible multiple-valued logic gates. J. Mult. Log. Soft Comput. 12, 417–429 (2006). https://doi.org/10.1109/ismvl.2004.1319922MathSciNetCrossRefMATH

10.

Dadoria, A.K., Khare, K.: Design and analysis of low-power adiabatic logic circuits by Using CNTFET technology. Circuits, Syst. Signal Process. 38, 4338–4356 (2019). https://doi.org/10.1007/s00034-019-01059-4

11.

Wang, S.H., Hung, C.C.: A 0.35-V 240-μW fast-lock and low-phase-noise frequency synthesizer for implantable biomedical applications. IEEE Trans. Biomed. Circuits Syst. 13, 1759–1770 (2019). https://doi.org/10.1109/TBCAS.2019.2941090

12.

Omran, H., Sharaf, K., Ibrahim, M.: An all-digital direct digital synthesizer fully implemented on FPGA. 2009 4th Int. Des. Test Work. IDT 2009. 2, 1–6 (2009). https://doi.org/10.1109/IDT.2009.5404133

13.

Omran, Q.K.; Islam, M.T.; Misran, N.: A new approach to the design of low-complexity direct digital frequency synthesizer. Prz. Elektrotechniczny. 89, 157–160 (2013)

14.

Jiang, Z.; Xu, R.; Huang, H.; Dong, C.: FPGA design of a ROM-Less direct digital frequency synthesizer. IET Conf. Publ. 2014, 242–245 (2014). https://doi.org/10.1049/cp.2014.1568CrossRef

15.

Kamboj, B.; Mehra, R.: Efficient FPGA implementation of direct digital frequency synthesizer for software radios. Int. J. Comput. Appl. 37, 25–29 (2012). https://doi.org/10.5120/4645-6714CrossRef

16.

Mehra, R.; Rana, R.: Efficient ASIC Design of Digital Down Converter for Mobile Applications. 10, 157–166 (2017)

17.

Ibrahim, S.H., Ali, S.H.M., Islam, M.S.: Hardware implementation of 32-bit high-speed direct digital frequency synthesizer. Sci. World J. 2014, (2014). https://doi.org/10.1155/2014/131568

18.

Spencer, D.T.; Drake, T.; Briles, T.C.; Stone, J.; Sinclair, L.C.; Fredrick, C.; Li, Q.; Westly, D.; Ilic, B.R.; Bluestone, A.; Volet, N.; Komljenovic, T.; Chang, L.; Lee, S.H.; Oh, D.Y.; Suh, M.G.; Yang, K.Y.; Pfeiffer, M.H.P.; Kippenberg, T.J.; Norberg, E.; Theogarajan, L.; Vahala, K.; Newbury, N.R.; Srinivasan, K.; Bowers, J.E.; Diddams, S.A.; Papp, S.B.: An optical-frequency synthesizer using integrated photonics. Nature 557, 81–85 (2018). https://doi.org/10.1038/s41586-018-0065-7CrossRef

19.

Li, X., Zhu, Q., Huang, Y., Hu, Y., Meng, Q.: Research on the freezing phenomenon of quantum correlation by machine learning. 65, 2143–2151 (2020). https://doi.org/10.32604/cmc.2020.010865

20.

Li, Z., Zhang, W., Zhang, G., Dai, J., Hu, J.: An Extended approach for generating unitary matrices for quantum circuits. 62, 1413–1421 (2020). https://doi.org/10.32604/cmc.2020.07483

21.

Ji, Z.; Wang, S.; Sun, Y.; Wang, J.: A DC voltage balancing strategy based on active vector correction for single-phase cascaded SST. 25, 715–723 (2019)

22.

Xiaolong, G.; Chunguang, L.; Yunhong, Q.: Study on on - site monitoring of hydration heat of mass concrete for bridge slab based on measured data. 25, 775–783 (2019)

23.

Han, M., Takahashi, Y., Sekine, T.: Low power adiabatic logic based on 2PC2AL. 2017 IEEE Int. Conf. IC Des. Technol. ICICDT 2017. 2–5 (2017). https://doi.org/10.1109/ICICDT.2017.7993517

24.

Garipelly, R.; Kiran, P.M.; Kumar, A.S.: An extended review on reversible logic gates and their implementation. Zenodo. 3, 417–423 (2015). https://doi.org/10.5281/ZENODO.3930180CrossRef

25.

Parthiban, K.; Sasikumar, S.: To implement positive feedback adiabatic logic (PFAL)—NAND technique on low power Zigbee applications for processor applications. Microprocess. Microsyst. 76, 102856 (2020). https://doi.org/10.1016/j.micpro.2019.102856CrossRef

26.

Devices, A.: A technical tutorial on digital signal synthesis. Appl. Note. 1–122 (1999)

27.

Bommi, R.M., Raja, S.S.: High Performance Reversible Direct Data Synthesizer for Radio Frequency Applications. Mob. Networks Appl. 24, (2019). https://doi.org/10.1007/s11036-018-1200-2

Title: Adiabatic Configurable Reversible Synthesizer for 5G Applications
Authors: R. M. Bommi
Mary Subaja Christo
Publication date: 01-02-2022
Publisher: Springer Berlin Heidelberg
Published in: Arabian Journal for Science and Engineering / Issue 2/2022
Print ISSN: 2193-567X
Electronic ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-021-06180-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2022

A Model-Driven Framework for the Development of MVC-Based (Web) Application

Isolated Video-Based Arabic Sign Language Recognition Using Convolutional and Recursive Neural Networks

Entity-Context and Relation-Context Combined Knowledge Graph Embeddings

Augmenting Driver’s Situational Awareness using Smartphones in VANETs

A Novel Approach to Printed Arabic Optical Character Recognition

Classification Based on Structural Information in Data

Premium Partners