Top

Arabian Journal for Science and Engineering

Published in:

10-01-2020 | Research Article-Mechanical Engineering

Application of Desirability Approach to Optimize the Control Factors in Cryogenic Diamond Burnishing

Authors: B. Sachin, S. Narendranath, D. Chakradhar

Published in: Arabian Journal for Science and Engineering | Issue 2/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Cryogenic diamond burnishing is an impactful method to enhance the functional performance of the product. In this article, an experimental study on the diamond burnishing of 17-4 precipitation hardenable stainless steel in a cryogenic cooling condition has been presented. This material has excellent corrosion resistance, high strength and enormous applications in the manufacturing industries. The control variables were namely burnishing force, burnishing feed and burnishing force have been studied and modeled for the output responses explicitly surface hardness and surface roughness. The influence of control variables on performance features has been analyzed using response surface graphs. The significant influence of burnishing conditions on the output responses was established by analysis of variance. Desirability function approach has been employed to optimize the multi-performance characteristics. At the corresponding highest desirability, the optimal process parameter combination was found to be burnishing feed = 0.053 mm/rev, burnishing speed = 31.29 m/min and burnishing force = 200 N which yields a minimum surface roughness = 0.199 µm and maximum surface hardness = 397.48 HV. The maximum percentage of error among the predicted and experimental results was found to be 10% and 2%, respectively, for surface roughness and surface hardness. The investigational findings were observed to be in agreement with the predicted value with permissible deviation.

previous article Effect of Gas Metal Arc Welding on Magnetic Response of Ferritic Stainless Steel

next article Prediction of Wax Appearance Temperature Using Artificial Intelligent Techniques

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Maximov, J.T.; Anchev, A.P.; Duncheva, G.V.; Ganev, N.; Selimov, K.F.: Influence of the process parameters on the surface roughness, micro-hardness, and residual stresses in slide burnishing of high-strength aluminum alloys. J. Braz. Soc. Mech. Sci. Eng. 39(8), 3067–3078 (2016). https://doi.org/10.1007/s40430-016-0647-y CrossRef

Sachin, B.; Narendranath, S.; Chakradhar, D.: Effect of cryogenic diamond burnishing on residual stress and microhardness of 17-4 PH stainless steel. Mater. Today Proc. 5, 18393–18399 (2018). https://doi.org/10.1016/j.matpr.2018.06.179 CrossRef

Ma, J.; Atabaki, M.M.; Liu, W.; Pillai, R.; Kumar, B.; Vasudevan, U.; Kovacevic, R.: Laser-based welding of 17-4 PH martensitic stainless steel in a tubular butt joint configuration with a built-in backing bar. Opt. Laser Technol. 82, 38–52 (2016). https://doi.org/10.1016/j.optlastec.2016.02.012 CrossRef

Mukhopadhyay, S.; Das, S.; Mukhopadhyay, G.; Bhattacharyya, S.; Palit, P.: Improving the property of a water box nozzle made of 17-4PH steel by suitable heat treatment. Eng. Fail. Anal. 49, 137–140 (2015). https://doi.org/10.1016/j.engfailanal.2014.11.011 CrossRef

Yildiz, Y.; Nalbant, M.: A review of cryogenic cooling in machining processes. Int. J. Mach. Tools Manuf. 48, 947–964 (2008). https://doi.org/10.1016/j.ijmachtools.2008.01.008 CrossRef

Hong, S.Y.; Zhao, Z.: Thermal aspects, material considerations and cooling strategies in cryogenic machining. Clean Technol. Environ. Policy 1, 107–116 (1999). https://doi.org/10.1007/s100980050016 CrossRef

Korzynski, M.; Dudek, K.; Palczak, A.; Kruczek, B.; Kocurek, P.: Experimental models and correlations between surface parameters after slide diamond burnishing. Meas. Sci. Rev. 18, 123–129 (2018). https://doi.org/10.1515/msr-2018-0018 CrossRef

Toboła, D.; Kania, B.: Phase composition and stress state in the surface layers of burnished and gas nitrided Sverker 21 and Vanadis 6 tool steels. Surf. Coat. Technol. 353, 105–115 (2018). https://doi.org/10.1016/j.surfcoat.2018.08.055 CrossRef

Maximov, J.T.; Duncheva, G.V.; Anchev, A.P.; Dunchev, V.P.: Crack resistance enhancement of joint bar holes by slide diamond burnishing using new tool equipment. Int. J. Adv. Manuf. Technol. (2019). https://doi.org/10.1007/s00170-019-03405-x CrossRef

10.

Okada, M.; Shinya, M.; Matsubara, H.; Kozuka, H.; Tachiya, H.; Asakawa, N.; Otsu, M.: Development and characterization of diamond tip burnishing with a rotary tool. J. Mater. Process. Technol. 244, 106–115 (2017). https://doi.org/10.1016/j.jmatprotec.2017.01.020 CrossRef

11.

Świrad, S.: The surface texture analysis after sliding burnishing with cylindrical elements. Wear 271, 576–581 (2011). https://doi.org/10.1016/j.wear.2010.05.005 CrossRef

12.

Maximov, J.T.; Duncheva, G.V.; Anchev, A.P.; Ganev, N.; Amudjev, I.M.; Dunchev, V.P.: Effect of slide burnishing method on the surface integrity of AISI 316Ti chromium–nickel steel. J. Braz. Soc. Mech. Sci. Eng. 40, 194 (2018). https://doi.org/10.1007/s40430-018-1135-3 CrossRef

13.

Korzynski, M.; Lubas, J.; Swirad, S.; Dudek, K.: Surface layer characteristics due to slide diamond burnishing with a cylindrical-ended tool. J. Mater. Process. Technol. 211, 84–94 (2011). https://doi.org/10.1016/j.jmatprotec.2010.08.029 CrossRef

14.

Sachin, B.; Narendranath, S.; Chakradhar, D.: Experimental evaluation of diamond burnishing for sustainable manufacturing. Mater. Res. Express 5, 106514 (2018). https://doi.org/10.1088/2053-1591/aadb0a CrossRef

15.

Rao, C.M.; Rao, S.S.; Herbert, M.A.: Development of novel cutting tool with a micro-hole pattern on PCD insert in machining of titanium alloy. J. Manuf. Process. 36, 93–103 (2018). https://doi.org/10.1016/j.jmapro.2018.09.028 CrossRef

16.

Yang, S.; Umbrello, D.; Dillon, O.W.; Puleo, D.A.; Jawahir, I.S.: Cryogenic cooling effect on surface and subsurface microstructural modifications in burnishing of Co–Cr–Mo biomaterial. J. Mater. Process. Technol. 217, 211–221 (2015). https://doi.org/10.1016/j.jmatprotec.2014.11.004 CrossRef

17.

Caudill, J.; Schoop, J.; Jawahir, I.S.: Correlation of surface integrity with processing parameters and advanced interface cooling/lubrication in burnishing of Ti–6Al–4V alloy. Adv. Mater. Process. Technol. 0698, 1–14 (2018). https://doi.org/10.1080/2374068X.2018.1511215 CrossRef

18.

Tang, J.; Luo, H.Y.; Zhang, Y.B.: Enhancing the surface integrity and corrosion resistance of Ti–6Al–4V titanium alloy through cryogenic burnishing. Int. J. Adv. Manuf. Technol. (2016). https://doi.org/10.1007/s00170-016-9000-y CrossRef

19.

Pu, Z.; Yang, S.; Song, G.L.; Dillon, O.W.; Puleo, D.A.; Jawahir, I.S.: Ultrafine-grained surface layer on Mg–Al–Zn alloy produced by cryogenic burnishing for enhanced corrosion resistance. Scr. Mater. 65, 520–523 (2011). https://doi.org/10.1016/j.scriptamat.2011.06.013 CrossRef

20.

Li, J.; Ma, C.; Ma, Y.; Li, Y.; Zhou, W.; Xu, P.: Medium optimization by combination of response surface methodology and desirability function: an application in glutamine production. Appl. Microbiol. Biotechnol. 74, 563–571 (2007). https://doi.org/10.1007/s00253-006-0699-5 CrossRef

21.

Kıvak, T.: Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts. Measurement 50, 19–28 (2014)CrossRef

22.

Çiçek, A.; Kıvak, T.; Ekici, E.: Optimization of drilling parameters using Taguchi technique and response surface methodology (RSM) in drilling of AISI 304 steel with cryogenically treated HSS drills. J. Intell. Manuf. 26(2), 295–305 (2015)CrossRef

23.

Kıvak, T.; Samtaş, G.; Çiçek, A.: Taguchi method based optimisation of drilling parameters in drilling of AISI 316 steel with PVD monolayer and multilayer coated HSS drills. Measurement 45(6), 1547–1557 (2012)CrossRef

24.

Noshad, M.; Mohebbi, M.; Shahidi, F.; Mortazavi, S.A.: Multi-objective optimization of osmotic-ultrasonic pretreatments and hot-air drying of quince using response surface methodology. Food Bioprocess. Technol. 5, 2098–2110 (2012). https://doi.org/10.1007/s11947-011-0577-8 CrossRef

25.

Seeman, M.; Ganesan, G.; Karthikeyan, R.; Velayudham, A.: Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach. Int. J. Adv. Manuf. Technol. 48, 613–624 (2010). https://doi.org/10.1007/s00170-009-2297-z CrossRef

26.

Sagbas, A.: Analysis and optimization of surface roughness in the ball burnishing process using response surface methodology and desirabilty function. Adv. Eng. Softw. 42, 992–998 (2011). https://doi.org/10.1016/j.advengsoft.2011.05.021 CrossRef

27.

El-Axir, M.H.; Othman, O.M.; Abodiena, A.M.: Study on the inner surface finishing of aluminum alloy 2014 by ball burnishing process. J. Mater. Process. Technol. 202, 435–442 (2008). https://doi.org/10.1016/j.jmatprotec.2007.10.040 CrossRef

28.

John, M.R.S.; Balaji, B.; Vinayagam, B.K.: Optimisation of internal roller burnishing process in CNC machining center using response surface methodology. J. Braz. Soc. Mech. Sci. Eng. 39, 4045–4057 (2017). https://doi.org/10.1007/s40430-017-0871-0 CrossRef

29.

El-Axir, M.H.: Investigation into roller burnishing. Int. J. Mach. Tools Manuf. 40, 1603–1617 (2000). https://doi.org/10.1016/S0890-6955(00)00019-5 CrossRef

30.

Nguyen, T.; Le, X.: Optimization of interior roller burnishing process for improving surface quality. Mater. Manuf. Process. 33, 1233–1241 (2018). https://doi.org/10.1080/10426914.2018.1453159 CrossRef

31.

Amdouni, H.; Bouzaiene, H.; Montagne, A.; Nasri, M.; Iost, A.: Modeling and optimization of a ball-burnished aluminum alloy flat surface with a crossed strategy based on response surface methodology. Int. J. Adv. Manuf. Technol. 88, 801–814 (2017). https://doi.org/10.1007/s00170-016-8817-8 CrossRef

32.

Sachin, B.; Narendranath, S.; Chakradhar, D.: Effect of working parameters on the surface integrity in cryogenic diamond burnishing of 17-4 PH stainless steel with a novel diamond burnishing tool. J. Manuf. Process. 38, 564–571 (2019). https://doi.org/10.1016/j.jmapro.2019.01.051 CrossRef

33.

Kansal, H.K.; Singh, S.; Kumar, P.: Parametric optimization of powder mixed electrical discharge machining by response surface methodology. J. Mater. Process. Technol. 169, 427–436 (2005). https://doi.org/10.1016/j.jmatprotec.2005.03.028 CrossRef

34.

Hassan, A.M.: The effects of ball- and roller-burnishing on the surface roughness and hardness of some non-ferrous metals. J. Mater. Process. Technol. 72, 385–391 (1997). https://doi.org/10.1016/S0924-0136(97)00199-4 CrossRef

35.

Sachin, B.; Narendranath, S.; Chakradhar, D.: Sustainable diamond burnishing of 17-4 PH stainless steel for enhanced surface integrity and product performance by using a novel modified tool. Mater. Res. Express 6(4), 046501 (2019). https://doi.org/10.1088/2053-1591/aaf900 CrossRef

36.

Lyons, A.C.; Ne, M.: An investigation of the surface topography of ball burnished mild steel and aluminium. Int. J. Adv. Manuf. Technol. 16, 469–473 (2000). https://doi.org/10.1007/s001700070054 CrossRef

37.

El-Taweel, T.A.; El-Axir, M.H.: Analysis and optimization of the ball burnishing process through the Taguchi technique. Int. J. Adv. Manuf. Technol. 41, 301–310 (2009). https://doi.org/10.1007/s00170-008-1485-6 CrossRef

38.

Hassan, A.M.; Al-Bsharat, A.S.: Influence of burnishing process on surface roughness, hardness, and microstructure of some non-ferrous metals. Wear 199, 1–8 (1996). https://doi.org/10.1016/0043-1648(95)06847-3 CrossRef

39.

Sachin, B.; Narendranath, S.; Chakradhar, D.: Selection of optimal process parameters in sustainable diamond burnishing of 17-4 PH stainless steel. J. Braz. Soc. Mech. Sci. 41, 219 (2019). https://doi.org/10.1007/s40430-019-1726-7 CrossRef

40.

Sachin, B.; Narendranath, S.; Chakradhar, D.: Enhancement of surface integrity by cryogenic diamond burnishing toward the improved functional performance of the components. J Braz. Soc. Mech. Sci. Eng. 41, 396 (2019). https://doi.org/10.1007/s40430-019-1918-1 CrossRef

41.

Sachin, B.; Narendranath, S.; Chakradhar, D.: Analysis of surface hardness and surface roughness in diamond burnishing of 17-4 PH stainless steel. IOP Conf. Ser. Mater. Sci. Eng. 577(1), 012075 (2019)CrossRef

42.

Rao, C.M.; Rao, S.S.; Herbert, M.A.: An experimental and numerical approach to study the performance of modified perforated cutting tools on machining of Ti–6Al–4V alloy. Arab. J. Sci. Eng. (2019). https://doi.org/10.1007/s13369-019-04268-w CrossRef

43.

Kumar, V.; Kumar, V.; Kumar, K.: An experimental analysis and optimization of machining rate and surface characteristics in WEDM of Monel-400 using RSM and desirability approach. J. Ind. Eng. 11(3), 297–307 (2015). https://doi.org/10.1007/s40092-015-0103-0 CrossRef

44.

Ambalal, K.; Pragnesh, P.; Brahmbhatt, K.: Response surface methodology based desirability approach for optimization of roller burnishing process parameter. J. Inst. Eng. Ser. C 99(6), 729–736 (2017). https://doi.org/10.1007/s40032-017-0368-8 CrossRef

Title: Application of Desirability Approach to Optimize the Control Factors in Cryogenic Diamond Burnishing
Authors: B. Sachin
S. Narendranath
D. Chakradhar
Publication date: 10-01-2020
Publisher: Springer Berlin Heidelberg
Published in: Arabian Journal for Science and Engineering / Issue 2/2020
Print ISSN: 2193-567X
Electronic ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-019-04326-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2020

Investigation of Vibration, Sound Intensity, Machine Current and Surface Roughness Values of AISI 4140 During Machining on the Lathe

Investigation of Heat-Assisted Dissimilar Friction Stir Welding of AA7075-T6 Aluminum and AZ31B Magnesium Alloys

Effect of Various Evaluation Criteria on Heat Transfer Enhancement of Nanofluids: A Case Study of Water-Based Cu2O Nanofluids

Influence of Keyhole Mode of Plasma Arc Welding on Microstructure and Mechanical Properties of Similar Butt-Welded Incoloy 800H

Nonlinear Mixed Convection Flow of Nanofluid Past a Moving Vertical Slender Cylinder

Research on Novel Magnetorheological Fluids Preparation Device Based on Flow Field Analysis

Premium Partners