Top

Metallurgist

Published in:

23-02-2023

Application of Mathematical Statistics to Improve Hadfield Steel Casting Impact Strength

Authors: S. L. Arapov, S. V. Belyaev, A. A. Kosovich, E. G. Partyko, N. A. Stepanenko, P. O. Yuriev, Y. N. Mansurov

Published in: Metallurgist | Issue 9-10/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

High-manganese austenitic Hadfield steel is the main material for manufacturing parts for mining, crushing, and grinding equipment. A key role in material property formation is played by chemical composition, the adjustment of which, with the introduction of alloying elements, may significantly improve operational performance. This article presents determination of steel 110G13L optimum chemical composition, while maintaining requirements for impact strength. Of particular interest is thorough analysis of data for a wide range of major elements: C from 0.9 to 1.3% and Mn from 11 to 16%. Mathematical statistics and forecasting tools are used for processing results, which makes it possible to accept with sufficient reliability analysis results for the Fe–1.1C–12.87Mn–0.6Si–0.4Cr system for subsequent research.

previous article Heat Transfer in High-Power Electric Arc Furnaces. Part II. Distribution of Thermal Radiation Flows of Arcs Over the Bath and Walls

next article New Ways of Obtaining Nanocomposites Based on Multi-Wall Carbon Nanotubes and Aluminum Alloy by High Pressure Casting

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

X. G. Cao, M. Y. Zhang, Y. R. Gong, X .L. Jia, and R. Y. Zhang, “Maintenance decision method considering inspection of mining equipment,” Int. J. Metrol. Qual. Eng., 12, 21 (2021); https://doi.org/10.1051/ijmqe/2021018.

V. S. Velikanov, O. S. Musonov, O. R. Panfilova, E. A. Il’ina, and N. V. Derina, “Tools for predicting analytics and minimizing mining transport equipment failure,” Vest. Magnit. Gos. Tekhn. Univ. im. G. I. Nosova, 19, No. 4, 5–15 (2021); 10.18503/ 1995-2732-2021-19-4-5-15.

C. Okechukwu, O. A. Dahunsi, P. K. Oke, I. O. Oladele, and M. Dauda, “Prominence of Hadfield steel in mining and minerals industries: A review,” IJET, 3, No. 2, 83–90 (2017); https://doi.org/10.19072/IJET.299068.

R. Allende-Seco, A. Artigas, H. Bruna, L. Carvajal, A. Monsalve, and M. F. Sklate-Boja, “Hardening by transformation and cold working in a Hadfield steel cone crusher liner,” Metals, 11, No. 6, 961 (2021); https://doi.org/10.3390/met11060961.

V. I. Alimov, A. P. Shtykhno, and I. I. Bairova, “Contemporary production of steel 110G13L for crushing and grinding equipment,” Resurs. Tekhnol. Proizvod. Obrabotki Davleniem Materialov Mashin., No. 3, 50–60 (2021).

F. C. Zhang, B. Lv, T. S. Wang, C. L. Zheng, M. Zhang, H. H. Luo, H. Liu, and A. Y. Xu, “Explosion hardening of Hadfield steel crossing,” Materials Science and Technology, 26, No. 2. 223–229 (2010); https://doi.org/10.1179/174328408X363263.CrossRef

E. N. Zhbanova, L. N. Saitgareev, I. É. Skidin, and G. A. Byalik, “Electrochemical method for improving steel 110G13L casting wear resistance during crystallization,” Vest. Gomel. Gos. Tekhn. Univ. im. P. O. Sukhogo, No. 3, 24–28 (2017).

T. V. Dement, N. A. Popova, and I. A. Kurzina, “Effect of a change in Mn concentration on phase composition and intragranular structure of alloy Fe–Mn–C (1.2 wt.% C),” Fund. Probl. Sovremen. Material., 13, No. 4, 421–516 (2016).

É. B. Ten and E. Yu. Likholobov, “Increase in steel 110G13L treatment in a ladle with ferrosilicon-aluminum and titanium,” Liteishchik Rossii, No. 10, 18–21 (2010).

10.

B. Zhavkhalan, D. S. Fil’chakov, Ya. V. Chzhan, O. Galaa, M. Shunchi, and B. D. Lygdenov, “Surface layer microalloying during casting crystallization of steel type 110G13L (Hadfield),” Polzunov. Al’manakh, No. 3, 27–20 (2019).

11.

K. Vdovin, A. Pesin, N. Feoktistov, and D. Gorlenko, “Surface wear in Hadfield steel castings DOPED with nitrided vanadium,” Metals, No. 8, 845 (2018); https://doi.org/10.3390/met8100845.

12.

M. B. Limooei and S. Hosseini, “Optimization of properties and structure with addition of titanium in Hadfield steels,” Metal, No. 5, 23–25 (2012).

13.

V. Najafabadi, K. Amini, and M. Alamdarlo, “Investigating the effect of titanium addition on the wear resistance of Hadfield steel,” Metallurgical Research & Technology, 111, No. 6, 375–382 (2014); https://doi.org/10.1051/metal/2014044.CrossRef

14.

D. A. Gordienko, I. V. Mikhalkina, N. A. Feoktistov, and D. A. Gorlenko, “Effect of alloying with ferrochrome on Hadfield steel chemical composition and carbide phase morphology,” Tekhnol. Metall. Mashin i Material., No. 19, 101–106 (2020).

15.

V. M. Kolokol’tsev, K. N. Vdovin, V. P. Cherepanov, N. A. Feoktistov, D. A. Gorlenko, and V. K. Dubrovkin, “Study of highmanganese steel abrasive and impact-abrasive wear mechanisms,” Vestn. MGTU im. G. I. Nosova, 15, No. 2, 54–62 (2017).

16.

R. Lencinaa, C. Calettia, K. Brunellib, and R. Miconea, “Assessing wear performance of two high-carbon Hadfield steels through field tests in the mining industry,” Procedia Materials Science, No. 9, 358–366 (2015).CrossRef

17.

B. A. Williams and S. Cremaschi, “Surrogate model selection for design space approximation and surrogate based optimization,” Computer Aided Chemical Engineering, No. 47, 353–358 (2019).CrossRef

18.

B. Akteke-Öztürk, G. Weber, and G. Köksal, “Generalized desirability functions: a structural and topological analysis of desirability functions,” Optimization, 69, No. 1, 115–130 (2020); https://doi.org/10.1080/02331934.2019.1570192.

19.

V. Marinkovic, “Some applications of a novel desirability function in simultaneous optimization of multiple responses,” FME Transactions, 49, No. 3, 534–548 (2021); https://doi.org/10.5937/fme2103534M.CrossRef

Title: Application of Mathematical Statistics to Improve Hadfield Steel Casting Impact Strength
Authors: S. L. Arapov
S. V. Belyaev
A. A. Kosovich
E. G. Partyko
N. A. Stepanenko
P. O. Yuriev
Y. N. Mansurov
Publication date: 23-02-2023
Publisher: Springer US
Published in: Metallurgist / Issue 9-10/2023
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-023-01421-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2023

Structure and Properties of Steel for Producing Hydrogen Sulfide Resistant Oil and Gas High Strength Pipes

Analysis of Trends in the Development of 3D Printing Technologies with Metal-Based Powder Materials

Research for Replacement of Gray Cast Irons for Manufacturing Electrolyzer Gas Collection Bell Cast Components

Evaluation of Tribotechnical Characteristics of Experimental Hard Alloy WC+(Co–Fe–Cu) During Friction Without Lubrication Against Stainless Steel

Study and Prediction of Plasticization of Hot-Rolled Steel Strip During Straightening Under Conditions of Alternating Deformation

Metallurgist Volume 66, Number 9

Premium Partners