Top

Polymer Science, Series D

Published in:

01-06-2023

Application of Software Packages for Analyzing the Performance of the Nonmetallic Part of a Pneumatic Spring

Authors: I. G. Marenkov, V. M. Lazarev, N. I. Baurova

Published in: Polymer Science, Series D | Issue 2/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A finite-element model (FEM) was prepared for the specimen of the nonmetallic part of the pneumatic spring of road vehicles. A 3D model was prepared for virtual computation. A grid was created for the nonmetallic part model specimen. The material for FEM calculation was selected to perform virtual computation. The computation results were analyzed for correspondence to real specimen testing results. The capabilities of LS-Dyna software in engineering analysis were demonstrated. The effect of computer-aided design systems on contemporary engineering solutions was estimated.

previous article Composite Materials Based on Basalt. Part 1. Application of Basalts in Composite Materials

next article Bioplastics Based on Copolymers of Glycerin, Phthalate Anhydride, and Lactic Acid

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V. A. Zorin and D. V. Seregin, “Prospects for the use of non-metallic materials in the production of road-building machines,” Mekhanizatsiya Stroitelstva, No. 7, 4–7 (2015).

I. G. Marenkov and N. I. Baurova, “The use of impregnating compositions upon service of the spring elements of road vehicles fabricated from nonmetallic materials,” Polym. Sci., Ser. D 14, 253–256 (2021).

V. A. Zorin, N. I. Baurova, and E. A. Kosenko, “detection of defects in components made of dispersion-filled polymeric materials by the method of infrared thermography,” Polym. Sci., Ser. D 10, 241–243 (2017).

V. A. Zorin, N. I. Baurova, and A. A. Pegachkov, “Assessment of products risks of mechanical engineering by results of diagnosing,” Periodicals Eng. Nat. Sci. 7, 287–293 (2019).

D. A. Aronovich, “Achievements in the field of increasing the thermal properties of anaerobic adhesives. An overview,” Polym. Sci., Ser. D 13, 414–418 (2020).

A. S. Borodulin and A. N. Kalinnikov, “Super engineering polyesters: synthesis and performance characteristics,” IOP Conf. Ser.: Mater. Sci. Eng. 709, 022038 (2020).

A. S. Borodulin, A. Kalinnikov, A. Kharaev, and S. Shcherbin, “Aromatic polysulfone to create polymer materials with high resistance to frost,” IOP Conf. Ser.: Mater. Sci. Eng. 302, 012062 (2019).

P. P. Maung, T. L. Htet, and G. V. Malysheva, “Simulation and optimization of vacuum assisted resin infusion process for large-sized structures made of carbon fiber-reinforced plastic,” JOP Conf. Ser.: Mater. Sci. Eng. 709, 022041 (2020).

V. A. Nelyub, B. L. Gorberg, M. V. Grishin, A. A. Berlin, G. V. Malysheva, “Properties and technology of applying metal coatings to carbon tape,” Fibre Chem. 50, 524–527 (2019).CrossRef

10.

A. I. Rudskoi and N. I. Baurova, “Technological heredity during the production and operation of structural materials,” Russ. Metall. 13, 1378–1383 (2019).CrossRef

11.

N. I. Baurova, V. A. Zorin, and V. M. Prikhodko, “Technological heredity and identification of technological processes,” Polym. Sci., Ser. D 8, 219–222 (2015).

12.

L. P. Kobets, A. S. Borodulin, and G. V. Malysheva, “Study of microcapillary impregnation of carbon fiber by epoxy binder,” Fibre Chem. 48, 311–315 (2016).CrossRef

13.

P. A. Belov, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Kinetics of fiber impregnation by a binder. gradient generalization of Navier–Stokes–Darcy equations,” Polym. Sci., Ser. D 9, 205–208 (2016).

14.

C. Yanyan, V. A. Nelyub, and G. V. Malysheva, “An investigation of the kinetics of the heating process for parts made of carbon fiber in the process for parts made of carbon fiber in the process of curing,” Polym. Sci., Ser. D 12, 296–299 (2019).

15.

E. A. Kosenko, N. I. Baurova, and V. A. Zorin, “The development of natural-like polymer composite materials with liquid matrix and their use in mechanical engineering,” Polym. Sci., Ser. D 13, 341–344 (2020).

16.

P. P. Maung and G. V. Malysheva, “Optimization of curing mode of epoxy resin based composites,” IOP Conf. Ser.: Mater. Sci. Eng. 683, 012065 (2019).

Title: Application of Software Packages for Analyzing the Performance of the Nonmetallic Part of a Pneumatic Spring
Authors: I. G. Marenkov
V. M. Lazarev
N. I. Baurova
Publication date: 01-06-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 2/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223020235

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2023

Application of Statistical Criteria for Checking the Homogeneity of Dispersions of Results of Fatigue Tests of Heat-Resistant Alloys Produced by Selective Laser Melting

A Composition Based on Linear-Ladder Siloxane Block Copolymer to Obtain Protective Coatings with High Physical and Chemical Properties

The Influence of Reinforcing Fibrous Filler on Properties of VK-36 Epoxy Polysulfon Adhesive

Bioplastics Based on Copolymers of Glycerin, Phthalate Anhydride, and Lactic Acid

Composite Materials Based on Basalt. Part 2. Composite Materials Based on Basalt Fibers and Condensation-Type Polymers

The Influence of Aging and Modification on the Relaxation Properties of Oil Road Bitumen and Asphalt Mastic

Premium Partners