Top

Journal of Intelligent Manufacturing

Published in:

12-03-2022

Artificial intelligence systems for tool condition monitoring in machining: analysis and critical review

Authors: Danil Yu Pimenov, Andres Bustillo, Szymon Wojciechowski, Vishal S. Sharma, Munish K. Gupta, Mustafa Kuntoğlu

Published in: Journal of Intelligent Manufacturing | Issue 5/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The wear of cutting tools, cutting force determination, surface roughness variations and other machining responses are of keen interest to latest researchers. The variations of these machining responses results in change in dimensional accuracy and productivity upto great extent. In addition, an excessive increase in wear leads to catastrophic consequences, exceeding the tool breakage. Therefore, this article discusses the online trend of modern approaches in tool condition monitoring while different machining operations. For this purpose, the effective use of new sensors and artificial intelligence (AI) is considered and followed during this holistic review work. The sensor systems used for monitoring tool wear are dynamometers, accelerometers, acoustic emission sensors, current and power sensors, image sensors, other sensors. These systems allow to solve the problem of automation and modeling of technological parameters of the main types of cutting, such as turning, milling, drilling and grinding. The modern artificial intelligence methods are considered, such as: Neural networks, Image recognition, Fuzzy logic, Adaptive neuro-fuzzy inference systems, Bayesian Networks, Support vector machine, Ensembles, Decision and regression trees, k-nearest neighbors, Artificial Neural Network, Markov model, Singular Spectrum Analysis, Genetic algorithms. Discussions also includes the main advantages, disadvantages and prospects of using various AI methods for tool wear monitoring. Moreover, the problems and future directions of the main processing methods using AI models are also highlighted.

previous article Automatic root cause analysis in manufacturing: an overview & conceptualization

next article Context-sensitive lexicon for imbalanced text sentiment classification using bidirectional LSTM

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Abellan-Nebot, J. V., & Romero, S. F. (2010). A review of machining monitoring systems based on artificial intelligence process models. International Journal of Advanced Manufacturing Technology, 47, 237–257. https://doi.org/10.1007/s00170-009-2191-8CrossRef

Abu-Mahfouz, I. (2003). Drilling wear detection and classification using vibration signals and artificial neural network. International Journal of Machine Tools and Manufacture, 43, 707–720.CrossRef

Ahmad, M. I., Yusof, Y., Daud, M. E., Latiff, K., Abdul Kadir, A. Z., & Saif, Y. (2020). Machine monitoring system: a decade in review. The International Journal of Advanced Manufacturing Technology, 108, 3645–3659.CrossRef

Ahmed, Y. S., Alam, M. S., Arif, A. F. M., & Veldhuis, S. C. (2019). Use of acoustic emission and cutting force signals to monitor built-up edge formation in stainless steel turning. International Journal of Advanced Manufacturing Technology, 103, 2257–2276.CrossRef

Ai, Y., Jiang, P., Shao, X., Wang, C., Li, P., Mi, G., et al. (2016). A defect-responsive optimization method for the fiber laser butt welding of dissimilar materials. Materials and Design, 90, 669–81. https://doi.org/10.1016/j.matdes.2015.10.160CrossRef

Ai, Y., Jiang, P., Shao, X., Wang, C., Li, P., Mi, G., et al. (2016). An optimization method for defects reduction in fiber laser keyhole welding. Applied Physics A, 122, 31.CrossRef

Ai, Y., Shao, X., Jiang, P., Li, P., Liu, Y., & Yue, C. (2015). Process modeling and parameter optimization using radial basis function neural network and genetic algorithm for laser welding of dissimilar materials. Applied Physics A, 121, 555–569.CrossRef

Akkoyun, F., Ercetin, A., Aslantas, K., Pimenov, D. Y., Giasin, K., Lakshmikanthan, A., et al. (2021). Measurement of micro burr and slot widths through image processing: comparison of manual and automated measurements in micro-milling. Sensors, 21, 4432.CrossRef

Alegre, E., Alaiz-Rodríguez, R., Barreiro, J., & Ruiz, J. (2009). Use of contour signatures and classification methods to optimize the tool life in metal machining. Estonian Journal of Engineering, 15, 3.CrossRef

Aliustaoglu, C., Ertunc, H. M., & Ocak, H. (2009). Tool wear condition monitoring using a sensor fusion model based on fuzzy inference system. Mechanical Systems and Signal Processing, 23, 539–546.CrossRef

Alonso, F. J., & Salgado, D. R. (2008). Analysis of the structure of vibration signals for tool wear detection. Mechanical Systems and Signal Processing, 22, 735–748.CrossRef

Ambadekar, P. K., & Choudhari, C. M. (2020). CNN based tool monitoring system to predict life of cutting tool. SN Applied Sciences, 2(5), 1–11.CrossRef

Ambhore, N., Kamble, D., Chinchanikar, S., & Wayal, V. (2015). Tool condition monitoring system: A review. Materials Today Proceedings, 2, 3419–3428.CrossRef

An, Q., Tao, Z., Xu, X., El Mansori, M., & Chen, M. (2020). A data-driven model for milling tool remaining useful life prediction with convolutional and stacked LSTM network. Measurement, 154, 107461.CrossRef

Arriandiaga, A., Portillo, E., Sánchez, J. A., Cabanes, I., & Pombo, I. (2014). Virtual sensors for on-line wheel wear and part roughness measurement in the grinding process. Sensors, 14, 8756–8778.CrossRef

Axinte, D., & Gindy, N. (2004). Assessment of the effectiveness of a spindle power signal for tool condition monitoring in machining processes. International Journal of Production Research, 42, 2679–2691.CrossRef

Balazinski, M., Czogala, E., Jemielniak, K., & Leski, J. (2002). Tool condition monitoring using artificial intelligence methods. Engineering Applications of Artificial Intelligence, 15, 73–80.CrossRef

Benardos, P. G., & Vosniakos, G. C. (2002). Prediction of surface roughness in CNC face milling using neural networks and Taguchi’s design of experiments. Robot Comput Integr Manuf, 18, 343–354.CrossRef

Bhat, N. N., Dutta, S., Pal, S. K., & Pal, S. (2016). Tool condition classification in turning process using hidden Markov model based on texture analysis of machined surface images. Measurement, 90, 500–509. https://doi.org/10.1016/j.measurement.2016.05.022CrossRef

Bhattacharyya, P., Sengupta, D., Mukhopadhyay, S., & Chattopadhyay, A. B. (2008). On-line tool condition monitoring in face milling using current and power signals. International Journal of Production Research, 46, 1187–1201.CrossRef

Bhuiyan, M. S. H., & Choudhury, I. A. (2014). Review of sensor applications in tool condition monitoring in machining. Comprehensive Materials Processing, 13, 539–569.CrossRef

Binsaeid, S., Asfour, S., Cho, S., & Onar, A. (2009). Machine ensemble approach for simultaneous detection of transient and gradual abnormalities in end milling using multisensor fusion. Journal of Materials Processing Technology, 209, 4728–4738.CrossRef

Brito, L. C., da Silva, M. B., & Duarte, M. A. V. (2021). Identification of cutting tool wear condition in turning using self-organizing map trained with imbalanced data. Journal of Intelligent Manufacturing, 32, 127–140.CrossRef

Bustillo, A., Díez-Pastor, J.-F., Quintana, G., & García-Osorio, C. (2011). Avoiding neural network fine tuning by using ensemble learning: Application to ball-end milling operations. International Journal of Advanced Manufacturing Technology, 57, 521.CrossRef

Bustillo, A., Pimenov, D. Y., Matuszewski, M., & Mikolajczyk, T. (2018). Using artificial intelligence models for the prediction of surface wear based on surface isotropy levels. Robot Comput Integr Manuf, 53, 215–227.CrossRef

Bustillo, A., Pimenov, D. Y., Mia, M., & Kapłonek, W. (2021). Machine-learning for automatic prediction of flatness deviation considering the wear of the face mill teeth. Journal of Intelligent Manufacturing, 32, 895–912.CrossRef

Bustillo, A., Reis, R., Machado, A. R., & Pimenov, D. Y. (2020). Improving the accuracy of machine-learning models with data from machine test repetitions. Journal of Intelligent Manufacturing, 2020, 1–19.

Byrne, G., Dornfeld, D., Inasaki, I., Ketteler, G., König, W., & Teti, R. (1995). Tool condition monitoring (TCM)—The status of research and industrial application. CIRP Annals, 44, 541–567.CrossRef

Caggiano, A. (2018). Tool wear prediction in Ti-6Al-4V machining through multiple sensor monitoring and PCA features pattern recognition. Sensors, 18, 823.CrossRef

Cai, W., Zhang, W., Hu, X., & Liu, Y. (2020). A hybrid information model based on long short-term memory network for tool condition monitoring. Journal of Intelligent Manufacturing, 31, 1497–1510.CrossRef

Çaydaş, U., & Ekici, S. (2012). Support vector machines models for surface roughness prediction in CNC turning of AISI 304 austenitic stainless steel. Journal of Intelligent Manufacturing, 23, 639–650. https://doi.org/10.1007/s10845-010-0415-2CrossRef

Chen, N., Hao, B., Guo, Y., Li, L., Khan, M. A., & He, N. (2020). Research on tool wear monitoring in drilling process based on APSO-LS-SVM approach. The International Journal of Advanced Manufacturing Technology, 108, 2091–2101.CrossRef

Chen, Y., Jin, Y., & Jiri, G. (2018). Predicting tool wear with multi-sensor data using deep belief networks. International Journal of Advanced Manufacturing Technology, 99, 1917–1926.CrossRef

Cheng, M., Jiao, L., Yan, P., Jiang, H., Wang, R., Qiu, T., et al. (2022). Intelligent tool wear monitoring and multi-step prediction based on deep learning model. Journal of Manufacturing Systems, 62, 286–300.CrossRef

Choudhury, S. K., Jain, V. K., & Rao, C. V. V. R. (1999). On-line monitoring of tool wear in turning using a neural network. International Journal of Machine Tools and Manufacture, 39, 489–504.CrossRef

Chryssolouris, G., & Domroese, M. (1989). An experimental study of strategies for integrating sensor information in machining. CIRP Annals, 38, 425–428.CrossRef

Cica, D., Sredanovic, B., Tesic, S., & Kramar, D. (2020). Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques. Appl Comput Informatics. https://doi.org/10.1016/j.aci.2020.02.001CrossRef

Corne, R., Nath, C., El Mansori, M., & Kurfess, T. (2017). Study of spindle power data with neural network for predicting real-time tool wear/breakage during inconel drilling. Journal of Manufacturing Systems, 43, 287–295.CrossRef

D’Addona, D. M., Matarazzo, D., Ullah, A. M. M. S., & Teti, R. (2015). Tool wear control through cognitive paradigms. Procedia CIRP, 33, 221–226.CrossRef

D’Addona, D. M., & Teti, R. (2013). Image data processing via neural networks for tool wear prediction. Procedia Cirp, 12, 252–257.CrossRef

D’Addona, D. M., Ullah, A. M. M. S., & Matarazzo, D. (2017). Tool-wear prediction and pattern-recognition using artificial neural network and DNA-based computing. Journal of Intelligent Manufacturing, 28, 1285–1301.CrossRef

da Silva, R. H. L., da Silva, M. B., & Hassui, A. (2016). A probabilistic neural network applied in monitoring tool wear in the end milling operation via acoustic emission and cutting power signals. Machining Science and Technology, 20, 386–405.CrossRef

Deiab, I., Assaleh, K., & Hammad, F. (2009). On modeling of tool wear using sensor fusion and polynomial classifiers. Mechanical Systems and Signal Processing, 23, 1719–1729.CrossRef

Dornfeld, D. A., & DeVries, M. F. (1990). Neural network sensor fusion for tool condition monitoring. CIRP Annals, 39, 101–105.CrossRef

Drouillet, C., Karandikar, J., Nath, C., Journeaux, A.-C., El Mansori, M., & Kurfess, T. (2016). Tool life predictions in milling using spindle power with the neural network technique. Journal of Manufacturing Processes, 22, 161–168.CrossRef

Durairaj, M., & Gowri, S. (2013). Parametric optimization for improved tool life and surface finish in micro turning using genetic algorithm. Procedia Engineering, 64, 878–87. https://doi.org/10.1016/j.proeng.2013.09.164CrossRef

Dutta, S., Pal, S. K., Mukhopadhyay, S., & Sen, R. (2013). Application of digital image processing in tool condition monitoring: A review. CIRP Journal of Manufacturing Science and Technology, 6, 212–232.CrossRef

Elangovan, M., Devasenapati, S. B., Sakthivel, N. R., & Ramachandran, K. I. (2011). Evaluation of expert system for condition monitoring of a single point cutting tool using principle component analysis and decision tree algorithm. Expert Systems with Applications, 38, 4450–4459.CrossRef

Erden, M. A., Yaşar, N., Korkmaz, M. E., Ayvacı, B., Nimel Sworna Ross, K., & Mia, M. (2021). Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method. The International Journal of Advanced Manufacturing Technology, 284, 2811–2827. https://doi.org/10.1007/s00170-021-07052-zCrossRef

Ertunc, H. M., & Oysu, C. (2004). Drill wear monitoring using cutting force signals. Mechatronics, 14, 533–548.CrossRef

Ezugwu, E. O., Fadare, D. A., Bonney, J., Da Silva, R. B., & Sales, W. F. (2005). Modelling the correlation between cutting and process parameters in high-speed machining of Inconel 718 alloy using an artificial neural network. International Journal of Machine Tools and Manufacture, 45, 1375–1385.CrossRef

Ferreira, F. I., de Aguiar, P. R., Lopes, W. N., Martins, C. H. R., de Souza, R. R., Bianchi, E. C., et al. (2019). Inferential measurement of the dresser width for the grinding process automation. International Journal of Advanced Manufacturing Technology, 100, 3055–3066.CrossRef

Fong, K. M., Wang, X., Kamaruddin, S., & Ismadi, M.-Z. (2021). Investigation on universal tool wear measurement technique using image-based cross-correlation analysis. Measurement, 169, 108489.CrossRef

Freyer, B. H., Heyns, P. S., & Theron, N. J. (2014). Comparing orthogonal force and unidirectional strain component processing for tool condition monitoring. Journal of Intelligent Manufacturing, 25, 473–487.CrossRef

Gajate, A., Haber, R., Toro, R., Vega, P., & Bustillo, A. (2012). Tool wear monitoring using neuro-fuzzy techniques: A comparative study in a turning process. Journal of Intelligent Manufacturing, 23, 869–882. https://doi.org/10.1007/s10845-010-0443-yCrossRef

García-Ordás, M. T., Alegre, E., González-Castro, V., & Alaiz-Rodríguez, R. (2017). A computer vision approach to analyze and classify tool wear level in milling processes using shape descriptors and machine learning techniques. International Journal of Advanced Manufacturing Technology, 90, 1947–1961.CrossRef

García-Ordás, M. T., Alegre-Gutiérrez, E., Alaiz-Rodríguez, R., & González-Castro, V. (2018). Tool wear monitoring using an online, automatic and low cost system based on local texture. Mechanical Systems and Signal Processing, 112, 98–112.CrossRef

Ghosh, N., Ravi, Y. B., Patra, A., Mukhopadhyay, S., Paul, S., Mohanty, A. R., et al. (2007). Estimation of tool wear during CNC milling using neural network-based sensor fusion. Mechanical Systems and Signal Processing, 21, 466–479.CrossRef

Gill, S. S., Singh, R., Singh, J., & Singh, H. (2012). Adaptive neuro-fuzzy inference system modeling of cryogenically treated AISI M2 HSS turning tool for estimation of flank wear. Expert Systems with Applications, 39, 4171–4180. https://doi.org/10.1016/j.eswa.2011.09.117CrossRef

Gomes, M. C., Brito, L. C., da Silva, M. B., & Duarte, M. A. V. (2021). Tool wear monitoring in micromilling using Support Vector Machine with vibration and sound sensors. Precision Engineering, 67, 137–151. https://doi.org/10.1016/j.precisioneng.2020.09.025CrossRef

Griffin, J. M. (2018). The prediction of profile deviations from multi process machining of complex geometrical features using combined evolutionary and neural network algorithms with embedded simulation. Journal of Intelligent Manufacturing, 29, 1171–1189.CrossRef

Günay, M., Korkmaz, M. E., & Yaşar, N. (2020). Performance analysis of coated carbide tool in turning of Nimonic 80A superalloy under different cutting environments. Journal of Manufacturing Processes, 56, 678–87. https://doi.org/10.1016/j.jmapro.2020.05.031CrossRef

Gupta, M. K., Mia, M., Pruncu, C. I., Khan, A. M., Rahman, M. A., Jamil, M., et al. (2020). Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle-assisted MQL in turning titanium alloy: An intelligent approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 207. https://doi.org/10.1007/s40430-020-2256-zCrossRef

Guzeev, V. I., & Pimenov, D. Y. (2011). Cutting force in face milling with tool wear. Russian Engineering Research, 31, 989.CrossRef

Hashmi, K., Graham, I. D., & Mills, B. (2003). Data selection for turning carbon steel using a fuzzy logic approach. J Mater Process Technol, 135, 44–58. https://doi.org/10.1016/S0924-0136(02)01011-7CrossRef

Heigel, J. C., Whitenton, E., Lane, B., Donmez, M. A., Madhavan, V., & Moscoso-Kingsley, W. (2017). Infrared measurement of the temperature at the tool–chip interface while machining Ti–6Al–4V. Journal of Materials Processing Technology, 243, 123–130. https://doi.org/10.1016/j.jmatprotec.2016.11.026CrossRef

Ho, S. Y., Lee, K. C., Chen, S. S., & Ho, S. J. (2002). Accurate modeling and prediction of surface roughness by computer vision in turning operations using an adaptive neuro-fuzzy inference system. International Journal of Machine Tools and Manufacture, 42, 1441–1446. https://doi.org/10.1016/S0890-6955(02)00078-0CrossRef

Hu, S., Liu, F., He, Y., & Hu, T. (2012). An on-line approach for energy efficiency monitoring of machine tools. Journal of Cleaner Production, 27, 133–140.CrossRef

Huang, Z., Zhu, J., Lei, J., Li, X., & Tian, F. (2019). Tool wear predicting based on multi-domain feature fusion by deep convolutional neural network in milling operations. Journal of Intelligent Manufacturing, 31, 953–966.CrossRef

Hui, Y., Mei, X., Jiang, G., Tao, T., Pei, C., & Ma, Z. (2019). milling tool wear state recognition by vibration signal using a stacked generalization ensemble model. Shock and Vibration, 2019, 1–16.CrossRef

Jackson, M. J., Robinson, G. M., Hyde, L. J., & Rhodes, R. (2006). Neural image processing of the wear of cutting tools coated with thin films. Journal of Materials Engineering and Performance, 15, 223–229.CrossRef

Jain, A. K., & Lad, B. K. (2019). A novel integrated tool condition monitoring system. Journal of Intelligent Manufacturing, 30, 1423–1436.CrossRef

Jang, J.-S. (1993). ANFIS: Adaptive-network-based fuzzy inference system. IEEE Transactions on Systems, Man, and Cybernetics, 23, 665–685.CrossRef

Javed, K., Gouriveau, R., Li, X., & Zerhouni, N. (2018). Tool wear monitoring and prognostics challenges: A comparison of connectionist methods toward an adaptive ensemble model. Journal of Intelligent Manufacturing, 29, 1873–1890.CrossRef

Jemielniak, K., Kwiatkowski, L., & Wrzosek, P. (1998). Diagnosis of tool wear based on cutting forces and acoustic emission measures as inputs to a neural network. Journal of Intelligent Manufacturing, 9, 447–455.CrossRef

Junior, P., D’Addona, D. M., Aguiar, P., & Teti, R. (2018). Dressing tool condition monitoring through impedance-based sensors: Part 2—neural networks and k-nearest neighbor classifier approach. Sensors, 18, 4453.CrossRef

Kamarthi, S. V., & Pittner, S. (1997). Fourier and wavelet transform for flank wear estimation—a comparison. Mechanical Systems and Signal Processing, 11, 791–809.CrossRef

Karandikar, J. M., Schmitz, T. L., & Abbas, A. E. (2012). Spindle speed selection for tool life testing using Bayesian inference. Journal of Manufacturing Systems, 31, 403–411.CrossRef

Kassim, A. A., Mian, Z., & Mannan, M. A. (2004). Connectivity oriented fast Hough transform for tool wear monitoring. Pattern Recognit, 37, 1925–1933.CrossRef

Kassim, A. A., Mian, Z., & Mannan, M. A. (2006). Tool condition classification using Hidden Markov model based on fractal analysis of machined surface textures. Machine Vision and Applications, 17, 327–336.CrossRef

Kaya, B., Oysu, C., Ertunc, H. M., & Ocak, H. (2012). A support vector machine-based online tool condition monitoring for milling using sensor fusion and a genetic algorithm. Proc Inst Mech Eng Part B J Eng Manuf, 226, 1808–1818.CrossRef

Kilundu, B., & Dehombreux, P. (2008). Singular spectrum analysis and Machine Learning techniques for tool wear monitoring. Mecanique and Industries, 9, 1–8.CrossRef

Kim, D.-H., Kim, T. J. Y., Wang, X., Kim, M., Quan, Y.-J., Oh, J. W., et al. (2018). Smart machining process using machine learning: A review and perspective on machining industry. International Journal of Precision Engineering and Manufacturing-Green Technology, 5, 555–568.CrossRef

Korkmaz, M. E., & Günay, M. (2018a). Finite element modelling of cutting forces and power consumption in turning of AISI 420 martensitic stainless steel. Arabian Journal for Science and Engineering, 43, 4863–4870. https://doi.org/10.1007/s13369-018-3204-4CrossRef

Korkmaz, M. E., & Günay, M. U. S. T. A. F. A. (2018). Experimental and statistical analysis on machinability of nimonic80A superalloy with pvd coated carbide. Sigma Journal of Engineering and Natural Sciences, 36, 1141–1152.

Korkmaz, M. E., Yaşar, N., & Günay, M. (2020). Numerical and experimental investigation of cutting forces in turning of Nimonic 80A superalloy. Engineering Science and Technology, an International Journal, 23, 664–673. https://doi.org/10.1016/j.jestch.2020.02.001CrossRef

Kothuru, A., Nooka, S. P., & Liu, R. (2018). Application of audible sound signals for tool wear monitoring using machine learning techniques in end milling. International Journal of Advanced Manufacturing Technology, 95, 3797–3808.CrossRef

Kovac, P., Rodic, D., Pucovsky, V., Savkovic, B., & Gostimirovic, M. (2014). Multi-output fuzzy inference system for modeling cutting temperature and tool life in face milling. Journal of Mechanical Science and Technology, 28, 4247–4256.CrossRef

Krishnakumar, P., Rameshkumar, K., & Ramachandran, K. I. (2018). Acoustic emission-based tool condition classification in a precision high-speed machining of titanium alloy: A machine learning approach. International Journal of Computational Intelligence and Applications, 17, 1850017.CrossRef

Kumar, A., Pradhan, S. K., & Jain, V. (2019). Experimental investigation and optimization using regression genetic algorithm of hard turning operation with wiper geometry inserts. Materials Today Proceedings, 27, 2724–2730. https://doi.org/10.1016/j.matpr.2019.12.191CrossRef

Kuncheva, L. I. (2014). Combining pattern classifiers: methods and algorithms. John Wiley & Sons.

Kuntoğlu, M., Aslan, A., Pimenov, D. Y., Usca, Ü. A., Salur, E., Gupta, M. K., et al. (2021a). A review of indirect tool condition monitoring systems and decision-making methods in turning: Critical analysis and trends. Sensors, 21, 108.CrossRef

Kuntoğlu, M., Aslan, A., Sağlam, H., Pimenov, D. Y., Giasin, K., & Mikolajczyk, T. (2020). Optimization and analysis of surface roughness, flank wear and 5 different sensorial data via tool condition monitoring system in turning of AISI 5140. Sensors, 20, 4377.CrossRef

Kuntoğlu, M., & Sağlam, H. (2021b). ANOVA and fuzzy rule based evaluation and estimation of flank wear, temperature and acoustic emission in turning. CIRP Journal of Manufacturing Science and Technology, 35, 589–603. https://doi.org/10.1016/j.cirpj.2021.07.011CrossRef

Kuntoğlu, M., & Sağlam, H. (2021c). Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning. Measurement, 173, 108582.CrossRef

Kuntoğlu, M., Salur, E., Gupta, M. K., Sarıkaya, M., & Pimenov, D. Y. (2021d). A state-of-the-art review on sensors and signal processing systems in mechanical machining processes. The International Journal of Advanced Manufacturing Technology, 116, 2711–2735.CrossRef

Kuo, R. J., & Cohen, P. H. (1999). Multi-sensor integration for on-line tool wear estimation through radial basis function networks and fuzzy neural network. Neural Networks, 12, 355–370.CrossRef

Kuram, E., & Ozcelik, B. (2016). Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling. Journal of Intelligent Manufacturing, 27, 817–830.CrossRef

LaValle, S. M. (2006). Planning algorithms. Cambridge University Press.CrossRef

Lee, K.-M., Huang, Y., Ji, J., & Lin, C.-Y. (2018). An online tool temperature monitoring method based on physics-guided infrared image features and artificial neural network for dry cutting. IEEE Transactions on Automation Science and Engineering, 15, 1665–1676.CrossRef

Letot, C., Serra, R., Dossevi, M., & Dehombreux, P. (2016). Cutting tools reliability and residual life prediction from degradation indicators in turning process. International Journal of Advanced Manufacturing Technology, 86, 495–506.CrossRef

Li, C. J., & Tzeng, T. C. (2000). Multimilling-insert wear assessment using non-linear virtual sensor, time-frequency distribution and neural networks. Mechanical Systems and Signal Processing, 14, 945–957.CrossRef

Li, H., Wang, W., Li, Z., Dong, L., & Li, Q. (2020). A novel approach for predicting tool remaining useful life using limited data. Mechanical Systems and Signal Processing, 143, 106832.CrossRef

Li, S., & Elbestawi, M. A. (1996). Tool condition monitoring in machining by fuzzy neural networks. Journal of Dynamic Systems, 118, 665–672.

Li, X. (2002). A brief review: Acoustic emission method for tool wear monitoring during turning. International Journal of Machine Tools and Manufacture, 42, 157–165.CrossRef

Li, X. Q., Wong, Y. S., & Nee, A. Y. C. (1999). Intelligent tool wear identification based on optical scattering image and hybrid artificial intelligence techniques. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213, 191–196.CrossRef

Liao, X., Zhou, G., Zhang, Z., Lu, J., & Ma, J. (2019). Tool wear state recognition based on GWO–SVM with feature selection of genetic algorithm. International Journal of Advanced Manufacturing Technology, 104, 1051–1063.CrossRef

Liu, C., Li, Y., Zhou, G., & Shen, W. (2018). A sensor fusion and support vector machine based approach for recognition of complex machining conditions. Journal of Intelligent Manufacturing, 29, 1739–1752.CrossRef

Liu, T. I., Kumagai, A., Wang, Y. C., Song, S. D., Fu, Z., & Lee, J. (2010). On-line monitoring of boring tools for control of boring operations. Robotics and Computer Integrated Manufacturing, 26, 230–239.CrossRef

Martínez-Arellano, G., Terrazas, G., & Ratchev, S. (2019). Tool wear classification using time series imaging and deep learning. International Journal of Advanced Manufacturing Technology, 104, 3647–3662.CrossRef

Maruda, R. W., Feldshtein, E., Legutko, S., & Krolczyk, G. M. (2015). Research on emulsion mist generation in the conditions of minimum quantity cooling lubrication (MQCL). Tehnički vjesnik, 22(5), 1213–1218.

Maruda, R. W., Feldshtein, E., Legutko, S., & Krolczyk, G. M. (2016a). Analysis of contact phenomena and heat exchange in the cutting zone under minimum quantity cooling lubrication conditions. Arabian Journal for Science and Engineering, 41, 661–668. https://doi.org/10.1007/s13369-015-1726-6CrossRef

Maruda, R. W., Krolczyk, G. M., Feldshtein, E., Nieslony, P., Tyliszczak, B., & Pusavec, F. (2017a). Tool wear characterizations in finish turning of AISI 1045 carbon steel for MQCL conditions. Wear, 372–373, 54–67. https://doi.org/10.1016/j.wear.2016.12.006CrossRef

Maruda, R. W., Krolczyk, G. M., Feldshtein, E., Pusavec, F., Szydlowski, M., Legutko, S., et al. (2016b). A study on droplets sizes, their distribution and heat exchange for minimum quantity cooling lubrication (MQCL). International Journal of Machine Tools and Manufacture, 100, 81–92. https://doi.org/10.1016/j.ijmachtools.2015.10.008CrossRef

Maruda, R. W., Krolczyk, G. M., Michalski, M., Nieslony, P., & Wojciechowski, S. (2017b). Structural and microhardness changes after turning of the AISI 1045 steel for minimum quantity cooling lubrication. Journal of Materials Engineering and Performance, 26, 431–438. https://doi.org/10.1007/s11665-016-2450-4CrossRef

Maruda, R. W., Krolczyk, G. M., Nieslony, P., Wojciechowski, S., Michalski, M., & Legutko, S. (2016c). The influence of the cooling conditions on the cutting tool wear and the chip formation mechanism. Journal of Manufacturing Processes, 24, 107–15. https://doi.org/10.1016/j.jmapro.2016.08.006CrossRef

Maruda, R. W., Krolczyk, G. M., Wojciechowski, S., Powalka, B., Klos, S., Szczotkarz, N., et al. (2020). Evaluation of turning with different cooling-lubricating techniques in terms of surface integrity and tribologic properties. Tribology International, 148, 106334. https://doi.org/10.1016/j.triboint.2020.106334CrossRef

Maruda, R. W., Krolczyk, G. M., Wojciechowski, S., Zak, K., Habrat, W., & Nieslony, P. (2018). Effects of extreme pressure and anti-wear additives on surface topography and tool wear during MQCL turning of AISI 1045 steel. Journal of Mechanical Science and Technology, 32, 1585–1591. https://doi.org/10.1007/s12206-018-0313-7CrossRef

Masoudi, S., Sima, M., & Tolouei-Rad, M. (2018). Comparative study of ANN and ANFIS models for predicting temperature in machining. Journal of Engineering Science and Technology, 13, 211–225.

McParland, D., Baron, S., O’Rourke, S., Dowling, D., Ahearne, E., & Parnell, A. (2019). Prediction of tool-wear in turning of medical grade cobalt chromium molybdenum alloy (ASTM F75) using non-parametric Bayesian models. Journal of Intelligent Manufacturing, 30, 1259–1270. https://doi.org/10.1007/s10845-017-1317-3CrossRef

Mia, M., Khan, M. A., & Dhar, N. R. (2017). Performance prediction of high-pressure coolant assisted turning of Ti-6Al-4V. International Journal of Advanced Manufacturing Technology, 90, 1433–1445.CrossRef

Mikołajczyk, T., Nowicki, K., Bustillo, A., & Pimenov, D. Y. (2018). Predicting tool life in turning operations using neural networks and image processing. Mechanical Systems and Signal Processing, 104, 503–513.CrossRef

Mikołajczyk, T., Nowicki, K., Kłodowski, A., & Pimenov, D. Y. (2017). Neural network approach for automatic image analysis of cutting edge wear. Mechanical Systems and Signal Processing, 88, 100–110.CrossRef

Mohanraj, T., Shankar, S., Rajasekar, R., Sakthivel, N. R., & Pramanik, A. (2020). Tool condition monitoring techniques in milling process—A review. Journal of Materials Research and Technology, 9, 1032–1042.CrossRef

Monostori, L., & Prohaszka, J. (1993). A step towards intelligent manufacturing: Modelling and monitoring of manufacturing processes through artificial neural networks. CIRP Annals, 42, 485–488.CrossRef

Munoa, J., Beudaert, X., Erkorkmaz, K., Iglesias, A., Barrios, A., & Zatarain, M. (2015). Active suppression of structural chatter vibrations using machine drives and accelerometers. CIRP Annals, 64, 385–388. https://doi.org/10.1016/j.cirp.2015.04.106CrossRef

Nakai, M. E., Aguiar, P. R., Guillardi, H., Jr., Bianchi, E. C., Spatti, D. H., & D’Addona, D. M. (2015). Evaluation of neural models applied to the estimation of tool wear in the grinding of advanced ceramics. Expert Systems with Applications, 42, 7026–7035.CrossRef

Ngo, T. (2011). Data mining: practical machine learning tools and technique, by ian h. witten, eibe frank, mark a. hell. ACM SIGSOFT Software Engineering Notes, 36(5), 51–52.CrossRef

Niaki, F. A., Feng, L., Ulutan, D., & Mears, L. (2016a). A wavelet-based data-driven modelling for tool wear assessment of difficult to machine materials. International Journal of Mechatronics and Manufacturing Systems, 9, 97–121.CrossRef

Niaki, F. A., Ulutan, D., & Mears, L. (2016b). Parameter inference under uncertainty in end-milling γ′-strengthened difficult-to-machine alloy. Journal of Manufacturing Science and Engineering, 138, 061014.CrossRef

O’Sullivan, D., & Cotterell, M. (2001). Temperature measurement in single point turning. Journal of Materials Processing Technology, 118, 301–308. https://doi.org/10.1016/S0924-0136(01)00853-6CrossRef

Olufayo, O., & Abou-El-Hossein, K. (2015). Tool life estimation based on acoustic emission monitoring in end-milling of H13 mould-steel. International Journal of Advanced Manufacturing Technology, 81, 39–51.CrossRef

Ong, P., Lee, W. K., & Lau, R. J. H. (2019). Tool condition monitoring in CNC end milling using wavelet neural network based on machine vision. International Journal of Advanced Manufacturing Technology, 104, 1369–1379.CrossRef

Oztemel, E., & Gursev, S. (2020). Literature review of Industry 40 and related technologies. Journal of Intelligent Manufacturing, 31, 127–182.CrossRef

Paliwal, M., & Kumar, U. A. (2009). Neural networks and statistical techniques: A review of applications. Expert Systems with Applications, 36, 2–17.CrossRef

Pan, T., Zhang, J., Yang, L., Zhao, W., Zhang, H., & Lu, B. (2021). Tool breakage monitoring based on the feature fusion of spindle acceleration signal. International Journal of Advanced Manufacturing Technology, 117, 2973–2986.CrossRef

Pandiyan, V., Caesarendra, W., Tjahjowidodo, T., & Tan, H. H. (2018). In-process tool condition monitoring in compliant abrasive belt grinding process using support vector machine and genetic algorithm. Journal of Manufacturing Processes, 31, 199–213.CrossRef

Pandiyan, V., Shevchik, S., Wasmer, K., Castagne, S., & Tjahjowidodo, T. (2020). Modelling and monitoring of abrasive finishing processes using artificial intelligence techniques: A review. Journal of Manufacturing Processes, 57, 114–135.CrossRef

Papandrea, P. J., Frigieri, E. P., Maia, P. R., Oliveira, L. G., & Paiva, A. P. (2020). Surface roughness diagnosis in hard turning using acoustic signals and support vector machine: A PCA-based approach. Appl Acoust, 159, 107102. https://doi.org/10.1016/j.apacoust.2019.107102CrossRef

Pathak, A. D., Warghane, R. S., & Deokar, S. U. (2018). Optimization of cutting parameters in dry turning of AISI A2 tool steel using carbide tool by taguchi based fuzzy logics. Materials Today Proceedings, 5, 5082–90. https://doi.org/10.1016/j.matpr.2017.12.087CrossRef

Patra, K., Pal, S. K., & Bhattacharyya, K. (2007). Artificial neural network based prediction of drill flank wear from motor current signals. Applied Soft Computing, 7, 929–935.CrossRef

Pimenov, D. Y., Bustillo, A., & Mikolajczyk, T. (2018). Artificial intelligence for automatic prediction of required surface roughness by monitoring wear on face mill teeth. Journal of Intelligent Manufacturing, 29, 1045–1061.CrossRef

Proteau, A., Tahan, A., Zemouri, R., & Thomas, M. (2021). Predicting the quality of a machined workpiece with a variational autoencoder approach. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-021-01822-yCrossRef

Quan, Y., Zhou, M., & Luo, Z. (1998). On-line robust identification of tool-wear via multi-sensor neural-network fusion. Engineering Applications of Artificial Intelligence, 11, 717–722.CrossRef

Rao, C. H. S., Rao, D. N., & Rao, R. N. S. (2006). Online prediction of diffusion wear on the flank through tool tip temperature in turning using artificial neural networks. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220, 2069–2076.CrossRef

Rao, K. V., & Murthy, P. (2018). Modeling and optimization of tool vibration and surface roughness in boring of steel using RSM. ANN and SVM. J Intell Manuf, 29, 1533–1543.CrossRef

Rao, K. V., Vidhu, K. P., Kumar, T. A., Rao, N. N., Murthy, P., & Balaji, M. (2016). An artificial neural network approach to investigate surface roughness and vibration of workpiece in boring of AISI1040 steels. International Journal of Advanced Manufacturing Technology, 83, 919–927.CrossRef

Rehorn, A. G., Jiang, J., & Orban, P. E. (2005). State-of-the-art methods and results in tool condition monitoring: A review. International Journal of Advanced Manufacturing Technology, 26, 693–710.CrossRef

Ren, Q., Balazinski, M., & Baron, L. (2012). High-order interval type-2 Takagi-Sugeno-Kang fuzzy logic system and its application in acoustic emission signal modeling in turning process. International Journal of Advanced Manufacturing Technology, 63, 1057–1063.CrossRef

Ren, Q., Balazinski, M., Baron, L., Jemielniak, K., Botez, R., & Achiche, S. (2014). Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling. Information Sciences, 255, 121–134.CrossRef

Ren, Q., Baron, L., Balazinski, M., Botez, R., & Bigras, P. (2015). Tool wear assessment based on type-2 fuzzy uncertainty estimation on acoustic emission. Applied Soft Computing, 31, 14–24.CrossRef

Rivero, A. D., de Lacalle, L. L., & Penalva, M. L. (2008). Tool wear detection in dry high-speed milling based upon the analysis of machine internal signals. Mechatronics, 18, 627–633.CrossRef

Rizal, M., Ghani, J. A., Nuawi, M. Z., & Haron, C. H. C. (2013). Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system. Applied Soft Computing, 13, 1960–1968. https://doi.org/10.1016/j.asoc.2012.11.043CrossRef

Rodić, D., Sekulić, M., Gostimirović, M., Pucovsky, V., & Kramar, D. (2021). Fuzzy logic and sub-clustering approaches to predict main cutting force in high-pressure jet assisted turning. Journal of Intelligent Manufacturing, 32, 21–36.CrossRef

Sadílek, M., Kratochvíl, J., Petrů, J., Čep, R., Zlámal, T., & Stančeková, D. (2014). Cutting tool wear monitoring with the use of impedance layers.

Sahali, M. A., Belaidi, I., & Serra, R. (2015). Efficient genetic algorithm for multi-objective robust optimization of machining parameters with taking into account uncertainties. International Journal of Advanced Manufacturing Technology, 77, 677–688.CrossRef

Sahu, N. K., & Andhare, A. B. (2017). Modelling and multiobjective optimization for productivity improvement in high speed milling of Ti–6Al–4V using RSM and GA. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39, 5069–5085.CrossRef

Saikumar, S., & Shunmugam, M. S. (2012). Investigations into high-speed rough and finish end-milling of hardened EN24 steel for implementation of control strategies. International Journal of Advanced Manufacturing Technology, 63, 391–406.CrossRef

Santos, M. C., Machado, A. R., Barrozo, M. A. S., Jackson, M. J., & Ezugwu, E. O. (2015). Multi-objective optimization of cutting conditions when turning aluminum alloys (1350-O and 7075–T6 grades) using genetic algorithm. International Journal of Advanced Manufacturing Technology, 76, 1123–1138.CrossRef

Santos, P., Maudes, J., & Bustillo, A. (2018). Identifying maximum imbalance in datasets for fault diagnosis of gearboxes. Journal of Intelligent Manufacturing, 29, 333–351.CrossRef

Scheffer, C., Engelbrecht, H., & Heyns, P. S. (2005). A comparative evaluation of neural networks and hidden Markov models for monitoring turning tool wear. Neural Computing and Applications, 14, 325–336. https://doi.org/10.1007/s00521-005-0469-9CrossRef

Sen, B., Mia, M., Mandal, U. K., & Mondal, S. P. (2019). GEP-and ANN-based tool wear monitoring: A virtually sensing predictive platform for MQL-assisted milling of Inconel 690. International Journal of Advanced Manufacturing Technology, 105, 395–410.CrossRef

Serin, G., Sener, B., Ozbayoglu, A. M., & Unver, H. O. (2020). Review of tool condition monitoring in machining and opportunities for deep learning. The International Journal of Advanced Manufacturing Technology, 109, 953–974.CrossRef

Shankar, S., Mohanraj, T., & Rajasekar, R. (2019). Prediction of cutting tool wear during milling process using artificial intelligence techniques. International Journal of Computer Integrated Manufacturing, 32, 174–182.CrossRef

Sharma, V., Kumar, P., & Prakash, Misra J. (2020). Cutting force predictive modelling of hard turning operation using fuzzy logic. Materials Today Proceedings, 26, 740–740. https://doi.org/10.1016/j.matpr.2020.01.018CrossRef

Sharma, V. S., Sharma, S. K., & Sharma, A. K. (2007). Cutting tool wear estimation for turning. Journal of Intelligent Manufacturing, 19, 99–108. https://doi.org/10.1007/s10845-007-0048-2CrossRef

Shen, Y., Yang, F., Habibullah, M. S., Ahmed, J., Das, A. K., Zhou, Y., et al. (2020). Predicting tool wear size across multi-cutting conditions using advanced machine learning techniques. Journal of Intelligent Manufacturing, 32, 1–14.

Shrivastava, Y., & Singh, B. (2018). Stable cutting zone prediction in CNC turning using adaptive signal processing technique merged with artificial neural network and multi-objective genetic algorithm. European Journal of Mechanics - A/Solids, 70, 238–48. https://doi.org/10.1016/j.euromechsol.2018.03.009CrossRef

Sick, B. (2002). On-line and indirect tool wear monitoring in turning with artificial neural networks: A review of more than a decade of research. Mechanical Systems and Signal Processing, 16, 487–546.CrossRef

Siddhpura, A., & Paurobally, R. (2013). A review of flank wear prediction methods for tool condition monitoring in a turning process. International Journal of Advanced Manufacturing Technology, 65, 371–393.CrossRef

Sofuoğlu, M. A., Çakır, F. H., Kuşhan, M. C., & Orak, S. (2019). Optimization of different non-traditional turning processes using soft computing methods. Soft Computing, 23, 5213–5231. https://doi.org/10.1007/s00500-018-3471-8CrossRef

Sortino, M. (2003). Application of statistical filtering for optical detection of tool wear. International Journal of Machine Tools and Manufacture, 43, 493–497.CrossRef

Sun, H., Cao, D., Zhao, Z., & Kang, X. (2018). A hybrid approach to cutting tool remaining useful life prediction based on the Wiener process. IEEE Transactions on Reliability, 67, 1294–1303.CrossRef

Sun, H., Zhang, J., Mo, R., & Zhang, X. (2020). In-process tool condition forecasting based on a deep learning method. Robotics and Computer-Integrated Manufacturing, 64, 101924.CrossRef

Szczotkarz, N., Mrugalski, R., Maruda, R. W., Królczyk, G. M., Legutko, S., Leksycki, K., et al. (2020). Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication. Tribology International, 156, 106813.CrossRef

Teti, R., Jemielniak, K., O’Donnell, G., & Dornfeld, D. (2010). Advanced monitoring of machining operations. CIRP Annals, 59, 717–739.CrossRef

Thoben, K.-D., Wiesner, S., & Wuest, T. (2017). “Industrie 4.0” and smart manufacturing-a review of research issues and application examples. International Journal of Automation Technology, 11, 4–16.CrossRef

Totis, G., & Sortino, M. (2011). Development of a modular dynamometer for triaxial cutting force measurement in turning. International Journal of Machine Tools and Manufacture, 51, 34–42. https://doi.org/10.1016/j.ijmachtools.2010.10.001CrossRef

Twardowski, P., & Wiciak-Pikuła, M. (2019). Prediction of Tool Wear Using Artificial Neural Networks during Turning of Hardened Steel. Materials, 12, 3091.CrossRef

Vasanth, X. A., Paul, P. S., & Varadarajan, A. S. (2020). A neural network model to predict surface roughness during turning of hardened SS410 steel. International Journal of Systems Assurance Engineering and Management, 11, 704–715.CrossRef

Vukelic, D., Simunovic, K., Kanovic, Z., Saric, T., Tadic, B., & Simunovic, G. (2021). Multi-objective optimization of steel AISI 1040 dry turning using genetic algorithm. Neural Computing and Applications, 33, 12445–12475. https://doi.org/10.1007/s00521-021-05877-zCrossRef

Wang, G., & Cui, Y. (2013). On line tool wear monitoring based on auto associative neural network. Journal of Intelligent Manufacturing, 24, 1085–1094.CrossRef

Wang, G., & Feng, X. (2013). Tool wear state recognition based on linear chain conditional random field model. Engineering Applications of Artificial Intelligence, 26, 1421–1427.CrossRef

Wang, G., Yang, Y., & Li, Z. (2014a). Force sensor based tool condition monitoring using a heterogeneous ensemble learning model. Sensors, 14, 21588–21602.CrossRef

Wang, G. F., Yang, Y. W., Zhang, Y. C., & Xie, Q. L. (2014b). Vibration sensor based tool condition monitoring using ν support vector machine and locality preserving projection. Sensors Actuators A Physical, 209, 24–32.CrossRef

Wang, G., Zhang, Y., Liu, C., Xie, Q., & Xu, Y. (2019). A new tool wear monitoring method based on multi-scale PCA. Journal of Intelligent Manufacturing, 30, 113–122.CrossRef

Wang, J., Huang, C. Z., & Song, W. G. (2003). The effect of tool flank wear on the orthogonal cutting process and its practical implications. Journal of Materials Processing Technology, 142, 338–346.CrossRef

Wang, J., Xie, J., Zhao, R., Zhang, L., & Duan, L. (2017). Multisensory fusion based virtual tool wear sensing for ubiquitous manufacturing. Robotics and Computer-Integrated Manufacturing, 45, 47–58.CrossRef

Wang, P., & Gao, R. X. (2015). Adaptive resampling-based particle filtering for tool life prediction. Journal of Manufacturing Systems, 37, 528–534.CrossRef

Wilkinson, P., Reuben, R. L., Jones, J. D. C., Barton, J. S., Hand, D. P., Carolan, T. A., et al. (1999). Tool wear prediction from acoustic emission and surface characteristics via an artificial neural network. Mechanical Systems and Signal Processing, 13, 955–966.CrossRef

Wojciechowski, S., Maruda, R. W., Krolczyk, G. M., & Niesłony, P. (2018). Application of signal to noise ratio and grey relational analysis to minimize forces and vibrations during precise ball end milling. Precision Engineering, 51, 582–596. https://doi.org/10.1016/j.precisioneng.2017.10.014CrossRef

Wojciechowski, S., Maruda, R. W., Nieslony, P., & Krolczyk, G. M. (2016). Investigation on the edge forces in ball end milling of inclined surfaces. International Journal of Mechanical Sciences, 119, 360–369.CrossRef

Wu, X., Liu, Y., Zhou, X., & Mou, A. (2019). Automatic identification of tool wear based on convolutional neural network in face milling process. Sensors, 19, 3817.CrossRef

Xie, Z., Li, J., & Lu, Y. (2018). An integrated wireless vibration sensing tool holder for milling tool condition monitoring. International Journal of Advanced Manufacturing Technology, 95, 2885–2896.CrossRef

Xu, L., Huang, C., Li, C., Wang, J., Liu, H., & Wang, X. (2020a). Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining. Journal of Intelligent Manufacturing, 32, 77–90.CrossRef

Xu, L., Huang, C., Li, C., Wang, J., Liu, H., & Wang, X. (2020b). A novel intelligent reasoning system to estimate energy consumption and optimize cutting parameters toward sustainable machining. Journal of Cleaner Production, 261, 121160.CrossRef

Yang, B., Guo, K., Liu, J., Sun, J., Song, G., Zhu, S., Sun, C., & Jiang, Z. (2020). Vibration singularity analysis for milling tool condition monitoring. International Journal of Mechanical Sciences, 166, 105254.CrossRef

Yang, Z., & Yu, Z. (2012). Grinding wheel wear monitoring based on wavelet analysis and support vector machine. International Journal of Advanced Manufacturing Technology, 62, 107–121.CrossRef

Yen, C.-L., Lu, M.-C., & Chen, J.-L. (2013). Applying the self-organization feature map (SOM) algorithm to AE-based tool wear monitoring in micro-cutting. Mechanical Systems and Signal Processing, 34, 353–366.CrossRef

Yeo, S. H., Khoo, L. P., & Neo, S. S. (2000). Tool condition monitoring using reflectance of chip surface and neural network. Journal of Intelligent Manufacturing, 11, 507–514.CrossRef

Yurtkuran, H., Korkmaz, M. E., & Günay, M. (2016). Modelling and optimization of the surface roughness in high speed hard turning with coated and uncoated CBN insert. Gazi University Journal of Science, 29(4), 987–995.

Zafar, T., Kamal, K., Sheikh, Z., Mathavan, S., Ali, U., & Hashmi, H. (2017). A neural network based approach for background noise reduction in airborne acoustic emission of a machining process. Journal of Mechanical Science and Technology, 31, 3171–3182.CrossRef

Zhang, B., & Shin, Y. C. (2018). A multimodal intelligent monitoring system for turning processes. Journal of Manufacturing Processes, 35, 547–558.CrossRef

Zhang, C., Yao, X., Zhang, J., & Jin, H. (2016). Tool condition monitoring and remaining useful life prognostic based on a wireless sensor in dry milling operations. Sensors, 16, 795.CrossRef

Zhang, K., Yuan, H., & Nie, P. (2015). A method for tool condition monitoring based on sensor fusion. Journal of Intelligent Manufacturing, 26, 1011–1026.CrossRef

Zheng, P., Wang, H., Sang, Z., Zhong, R. Y., Liu, Y., Liu, C., et al. (2018). Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives. Frontiers of Mechanical Engineering, 13, 137–50. https://doi.org/10.1007/s11465-018-0499-5CrossRef

Zhu, K., San Wong, Y., & Hong, G. S. (2009). Wavelet analysis of sensor signals for tool condition monitoring: A review and some new results. International Journal of Machine Tools and Manufacture, 49, 537–553.CrossRef

Zuperl, U., Cus, F., & Reibenschuh, M. (2012). Modeling and adaptive force control of milling by using artificial techniques. Journal of Intelligent Manufacturing, 23, 1805–1815.CrossRef

Title: Artificial intelligence systems for tool condition monitoring in machining: analysis and critical review
Authors: Danil Yu Pimenov
Andres Bustillo
Szymon Wojciechowski
Vishal S. Sharma
Munish K. Gupta
Mustafa Kuntoğlu
Publication date: 12-03-2022
Publisher: Springer US
Published in: Journal of Intelligent Manufacturing / Issue 5/2023
Print ISSN: 0956-5515
Electronic ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-022-01923-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5/2023

Image-based characterization of laser scribing quality using transfer learning

A fuzzy multi-criteria approach based on Clarke and Wright savings algorithm for vehicle routing problem in humanitarian aid distribution

An edge-based algorithm for tool wear monitoring in repetitive milling processes

Pipeline for ontology-based modeling and automated deployment of digital twins for planning and control of manufacturing systems

A dynamic mode decomposition based deep learning technique for prognostics

Autonomous self-healing mechanism for a CNC milling machine based on pattern recognition

Premium Partners