Band gap engineering in PbSe thin films from near-infrared to visible region by photochemical deposition method

Lead selenide (PbSe) thin films have been synthesized by the established photochemical deposition technique using lead nitrate and lead acetate as sources for the metal ions and sodium seleno sulphate as the selenium source along with triethanolamine, ammonia and hydrazine hydrate as complexing agents. A comprehensive study of the effect of substrate materials on physical properties of as deposited PbSe thin films is reported in this work. Two substrates were used in this investigation, namely soda lime glass slides and gold coin corning glass slides. The solution is irradiated with UV light and the photochemical reactions in the aqueous solution resulted in highly adherent metallic thin films. X-ray diffraction (XRD), scanning electron microscopy, optical and electrical measurement techniques were used for film characterization. The XRD analysis confirmed that all films were cubic, regardless of the cationic precursors and substrates used. The scanning electron microscope micrographs showed variations in morphology. The optical studies revealed that the films have good absorption in the visible region. The remarkable success of our effort was that we have been able to modify optical band gap of PbSe thin films over a wide spectral range by a cost effective route. The band gaps estimated from the transmission spectra were in the range 1.32–1.40 eV for films deposited on soda lime glass substrates and 1.46–1.55 eV for corning glass substrates. The room temperature conductivity of the PbSe films were in the range of 3.71 × 10⁻⁷–513 × 10⁻⁷ (Ω cm)⁻¹. The as deposited PbSe thin films with low transmittance in the visible region coupled with an appreciable reflectance in infrared region were found to satisfy the basic requirements for solar control coatings for window glazing applications in warm climates. Through this work we established that irrespective of metal salts, soda lime glass substrate was superior to corning glass substrate.