Top

Polymer Science, Series D

Published in:

01-03-2022

Characteristics of Glass–Fiber-Reinforced Plastics Based on Binders with Decreased Curing Temperature

Authors: E. D. Kolpachkov, Yu. M. Gurevch, A. O. Kurnosov, P. S. Marakhovskii, A. P. Petrova

Published in: Polymer Science, Series D | Issue 1/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Results are given on the development of infusion with decreased curing temperature. Viscous and thermophysical characteristics are presented for the developed binder that has a curing temperature of 150°C. The physicomechanical characteristics of a hybrid composite material based on the developed binder are also presented.

previous article Rubber and Rubber–Polymer Modifiers of Asphalt–Concrete Mixes Prepared by High-Temperature Shear-Induced Grinding. Part 3. Evaluation of Effectiveness of Modification

next article The Theoretical Basis of Mechanics of Polymer Composites for FDM-Printing Technologies

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. N. Kablov, “Strategical areas of developing materials and their processing technologies for the period up to 2030,” Aviats. Mater. Tekhnol., No. 5, 7–17 (2012).

E. N. Kablov, “Modern materials as a basis for innovative modernization of Russia,” Met. Evrazii, No. 3, 10–15 (2012).

E. N. Kablov, “Formation of domestic space materials science,” Vestn. Ross. Fonda Fund. Issled., No. 3, 97–105 (2017).

P. N. Timoshkov, V. A. Goncharov, M. N. Usacheva, and A. V. Khrul’kov, “Effect of gaps and overlaps when laying prepregs on the mechanical properties of carbon plastics (review),” Tr. Vseross. Inst. Aviats. Mater., No. 12, 71–78 (2018).

Yu. A. Gusev and O. N. Tverdaya, “The effect of calendaring clearance on maintaining the strength characteristics of carbon fiber when impregnating a unidirectional prepreg,” Tr. Vseross. Inst. Aviats. Mater., No. 9, 61–67 (2020).

A. G. Zagora, S. V. Kondrashov, N. V. Antyufeeva, and A. A. Pykhtin, “Research of influence of technological modes of production of epoxy nanocomposites with carbon nanotubes on their heat resistance,” Tr. Vseross. Inst. Aviats. Mater., No. 1, 64–73 (2019).

D. A. Melnikov, M. A. Khaskov, M. A. Guseva, and N. V. Antyufeeva, “To the question of the development of pressing mode for laminated PCMs based on prepreg,” Tr. Vseross. Inst. Aviats. Mater., No. 2, 9 (2018).

V. V. Samoilenko, Candidate’s Dissertation in Engineering (Institute for Problems of Chemical and Energetic Technologies, Siberian Branch, Russian Academy of Sciences, Biysk, 2018).

M. S. Fedoseev, V. E. Antipin, L. F. Derzhavinskaya, M. G. Shcherban, and G. I. Shaidurova, “Preparation of heat-resistant epoxy anhydride compounds featured by long-term viability, of polymers and composites,” Vestn. Tver. Gos. Univ., Ser. Khim., No. 1, 120–133 (2017).

10.

A. M. Ustinova, E. V. Oleinikova, V. A. Lipskaya, N. S. Belobrov, and A. N. Vorob’ev, “Fast curing epoxy binder,” Plast. Massy, No. 3, 34–42 (1983).

11.

A. N. Kudryavtseva, I. V. Terekhov, Ya. M. Gurevich, and K. N. Grigoreva, “Modification of epoxy resin system for composite materials with resorcinol,” Tr. Vseross. Inst. Aviats. Mater., No. 2, 35–42 (2019).

12.

E. A. Veshkin, V. I. Postnov, V. V. Semenychev, and E. V. Krasheninnikova, “Research of microhardness and sclerometric characteristics of the binding UP-2227N, cured by different regimes,” Aviats. Mater. Tekhnol., No. 1, 39–45 (2018).

13.

V. N. Mosiyuk and O. V. Tomchani, “Evaluation of properties of glass-fibre-reinforced plastics based on epoxybismaleimide resin, produced by different non-autoclave molding techniques,” Aviats. Mater. Tekhnol., No. 2, 47–52 (2019).

14.

R. A. Satdinov, S. E. Istyagin, and E. A. Veshkin, “Analysis of the temperature-time parameters mode curing PCM with specified characteristics,” Tr. Vseross. Inst. Aviats. Mater., No. 3, 9 (2017).

15.

E. D. Kolpachkov, A. O. Kurnosov, A. P. Petrova, and A. E. Raskutin, “Gibridnye kompozitsionnye materialy dlya aviatsii na osnove voloknistykh napolnitelei (obzor),” Vopr. Materialoved., No. 1 (2020).

Title: Characteristics of Glass–Fiber-Reinforced Plastics Based on Binders with Decreased Curing Temperature
Authors: E. D. Kolpachkov
Yu. M. Gurevch
A. O. Kurnosov
P. S. Marakhovskii
A. P. Petrova
Publication date: 01-03-2022
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 1/2022
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421222010130

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2022

Comparison of Techniques for Adhesive Properties Measuring of Polymer Films Modified by Plasma

Foreign Conductive Adhesives, Testing Methods, Properties, and Application. Review

Determination of the Influence of the Working Environment on the Development of Underfilm Corrosion of Machine Parts with Dispersed-Filled Polymer Coatings

Rubber and Rubber–Polymer Modifiers of Asphalt–Concrete Mixes Prepared by High-Temperature Shear-Induced Grinding. Part 3. Evaluation of Effectiveness of Modification

Adhesion Mechanics. Estimation of Contact-Layer Parameters

The Theoretical Basis of Mechanics of Polymer Composites for FDM-Printing Technologies

Premium Partners