Top

Polymer Science, Series D

Published in:

01-07-2021

Comparison of the Behavior of Adhesive Joints Performed by Phenolic-Rubber and Epoxy-Film Adhesives at Simultaneous Exposure of Loads and Climatic Factors

Authors: A. P. Petrova, N. F. Lukina, A. Yu. Isaev

Published in: Polymer Science, Series D | Issue 3/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The behavior of adhesive joints of D16AT An. Ox. chrom. aluminum alloy, made with the use of epoxy and phenolic-rubber adhesives, while exposed to constant tensile load and climatic factors in humid subtropics, both in open air and under a canopy, which made it possible to develop recommendations for the protection of adhesive compounds from exposure climatic factors.

previous article A Mathematical Model of Thermal Irradiation Processing of Polymer Coatings during Restoration of Automobile Body Parts

next article Thermophysical Characteristics of Multicomponent Pastes for Application of Hardening Coatings

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

D. A. Kardashov and A. P. Petrova, Polymer Adhesives. Creation and Application (Khimiya, Moscow, 1983) [in Russian].

A. P. Petrova and A. A. Donskoi, Adhesive Materials. Sealants (NPO “Professional,” St. Petersburg, 2008) [in Russian].

A. P. Petrova and G. V. Malysheva, Adhesives, Adhesive Binders, and Adhesive Prepregs: Handbook, Ed. by E. N. Kablov (VIAM, Moscow, 2017) [in Russian].

VIAM Today. 2012–2017 (VIAM, Moscow, 2017) [in Russian].

A. P. Petrova, N. F. Lukina, L. A. Dement’eva, and L. I. Anikhovskaya, “Film structural adhesives,” Polym. Sci., Ser. D 8, 138–143 (2015). https://doi.org/10.1134/S1995421215020148CrossRef

E. N. Kablov, L. V. Chursova, N. F. Lukina, K. E. Kutsevich, E. V. Rubtsova, and A. P. Petrova, “A study of epoxide–polysulfone polymer systems for high-strength adhesives of aviation purpose,” Polym. Sci., Ser. D 10, 225–229 (2017). https://doi.org/10.1134/S1995421217030066CrossRef

Aviation Materials: Handbook in 13 Volumes, Vol. 10: Adhesives, Sealants, Rubbers, and Hydraulic Fluids, Part 1: Adhesives and Adhesive Prepregs, Ed. by E. N. Kablov (VIAM, Moscow, 2019) [in Russian].

L. A. Dement’eva, K. E. Kutsevich, N. F. Lukina, and A. P. Petrova, “Properties of an epoxy structural film adhesive modified by polysulfones,” Polym. Sci., Ser. D 10, 143–149 (2017). https://doi.org/10.1134/S1995421217020058CrossRef

T. Yu. Tyumeneva, N. S. Zhadova, and N. F. Lukina, “Advances of VIAM in the field of rubber-technical adhesives and self-adhesive materials,” Tr. VIAM, No. 7, 04 (2014). http://www.viam-works.ru. Accessed March 19, 2020.

10.

N. F. Lukina, Dement’eva L.A., A. P. Petrova, and L. I. Anikhovskaya, “Adhesives in the design of helicopter blades,” Tr. VIAM 2016, No. 7 (43), 7–11. http://www.viam-works.ru. Accessed March 10, 2020. doi 18577/2307-6046-2016-0-7-7-11

11.

Aviation Materials: Handbook in 13 Volumes, Vol. 13: Climatic and Microbiological Resistance of Non-Metallic Materials, Ed. by E. N. Kablov (VIAM, Moscow, 2019) [in Russian].

12.

E. N. Kablov, “Innovations of the All-Russian Institute of Aviation Materials (VIAM) as part of implementing the Strategic Directions of Development of Materials and Technologies of Their Processing for the Period up to 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015). https://doi.org/10.18577/2071-9140-2015-0-1-3-33

13.

E. N. Kablov, “Strategic directions of development of materials and technologies of their processing for the period up to 2030,” Aviats. Mater. Tekhnol., Suppl., 7–17 (2012).

14.

E. N. Kablov, “New generation materials,” Zashch. Bezop., No. 4, 28–29 (2014).

Title: Comparison of the Behavior of Adhesive Joints Performed by Phenolic-Rubber and Epoxy-Film Adhesives at Simultaneous Exposure of Loads and Climatic Factors
Authors: A. P. Petrova
N. F. Lukina
A. Yu. Isaev
Publication date: 01-07-2021
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 3/2021
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421221030254

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2021

Adhesives for High-Temperature Tensometry

Synthesis of Cardanol-Containing Resols for Producing Phenolic Films: Protective Coatings for Wood Composites

Prediction of the Biological Activity of N-Vinyl Compounds and Polymers Based on Them

Estimating Loading Capacity in Fit-Pressed Adhesive Joints

Graded Recycled Polymers Modified by Thermoelastoplasts: Composite Materials to Be Used for Injection Molding

Some Adhesion and Physicomechanical Properties of Blends of Polyethylene with Polar Copolymers

Premium Partners