Top

Journal of Materials Engineering and Performance

Published in:

31-05-2022 | Technical Article

Corrosion and Metal Release Investigation of a Porous Biomedical Vitallium Alloy Coated with 58S Sol-Gel Bioactive Glass

Authors: Mohammad Reza Haftbaradaran-Esfahani, Mehdi Ahmadian, Masoud Atapour

Published in: Journal of Materials Engineering and Performance | Issue 12/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Corrosion and metal release characteristics of cobalt-based alloys are important factors influential on their biomedical applications. This study fabricated a porous Vitallium (CoCrMo) alloy and then coated with a 58S bioglass coating by applying the sol-gel dipping method with 3, 4 and 5 cycles to examine the corrosion and ion release performance of this alloy. For this purpose, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and immersion tests were conducted in the simulated body fluid (SBF) at 37 °C. Also, the released ion measurements were performed by inductive coupled plasma optical emission spectrometry (ICP-OES). SEM examinations on the porous substrate indicated that this porous scaffold exhibited the porosity of 37% and the content of small porosities was decreased; however, the macrospores on the surface were intact after applying bioglass coatings. Furthermore, increasing the dipping cycles led to enhancing the corrosion potential from − 191 mV (in the uncoated porous sample) to − 98 mV (in the coated porous sample dipped 5 cycles in the bioglass sols). EIS results in SBF demonstrated that the corrosion performance of the coatings was improved by increasing the dipping cycles from 0 to 5. ICP-OES results also proved that the presence of the 58 S bioglass coating on the porous Vitallium decreased the release of cobalt and chromium ions, while it enriched Ca and P, thereby improving the bioactivity of the samples.

previous article Enhanced Mechanical Properties and Corrosion Resistance by Minor Gd Alloying with a Hot-Extruded Mg Alloy

next article Effect of Electromagnetic Force on the Strength of Electromagnetic Impulse Powder Compaction

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. Mahlooji, M. Atapour and S. Labbaf, Electrophoretic Deposition of Bioactive Glass–Chitosan Nanocomposite Coatings on Ti-6Al-4V for Orthopedic Applications, Carbohydr. Polym., 2019, 226, p 115299. https://doi.org/10.1016/j.carbpol.2019.115299CrossRef

M. Alaei, M. Atapour and S. Labbaf, Electrophoretic Deposition of Chitosan-Bioactive Glass Nanocomposite Coatings on AZ91 Mg Alloy for Biomedical Applications, Prog. Org. Coat., 2020, 147, p 105803. https://doi.org/10.1016/j.porgcoat.2020.105803CrossRef

A. Nouri and C. Wen, 1 - Introduction to surface coating and modification for metallic biomaterials, in Surface Coating and Modification for Metallic Biomaterials, (Woodhead Publishing, 2015), pp. 3–60

T. Narushima and K. Ueda, Alfirano, Co-Cr Alloys as Effective Metallic, Biomaterials, 2015 https://doi.org/10.1007/978-3-662-46836-4_7CrossRef

M.R. Haftbaradaran-Esfahani, M. Ahmadian and A.H. Nassajpour-Esfahani, Fabrication and Characterization of Porous Biomedical Vitallium Alloy with 58S Bioglass Coating Prepared By Sol-Gel Method, Appl. Surf. Sci., 2020, 506, p 144959. https://doi.org/10.1016/J.APSUSC.2019.144959CrossRef

R.H. Oskouei, M.R. Barati, H. Farhoudi, M. Taylor and L.B. Solomon, A New Finding on the In-Vivo Crevice Corrosion Damage in a CoCrMo Hip Implant, Mater. Sci. Eng. C., 2017, 79, p 390–398. https://doi.org/10.1016/j.msec.2017.05.086CrossRef

E. Krasicka-Cydzik, Z. Oksiuta and J.R. Dabrowski, Corrosion Testing of Sintered Samples made of the Co-Cr-Mo Alloy for Surgical Applications, J. Mater. Sci. Mater. Med., 2005, 16, p 197–202. https://doi.org/10.1007/s10856-005-6680-5CrossRef

M. Ren, S. Cai, G. Xu, X. Ye, Y. Dou, K. Huang and X. Wang, Influence of Heat Treatment on Crystallization and Corrosion Behavior of Calcium Phosphate Glass Coated AZ31 Magnesium Alloy by Sol–Gel Method, J. Non. Cryst. Solids, 2013, 369, p 69–75. https://doi.org/10.1016/j.jnoncrysol.2013.03.022CrossRef

S.C. Cachinho and R.N. Correia, Titanium Scaffolds for Osteointegration: Mechanical, In Vitro and Corrosion Behaviour, J. Mater. Sci. Mater. Med., 2008, 19, p 451–457. https://doi.org/10.1007/s10856-006-0052-7CrossRef

10.

K. Huang, S. Cai, G. Xu, M. Ren, X. Wang, R. Zhang, S. Niu and H. Zhao, Sol–Gel Derived Mesoporous 58S Bioactive Glass Coatings on AZ31 Magnesium Alloy and In Vitro Degradation Behavior, Surf. Coat. Technol., 2014, 240, p 137–144. https://doi.org/10.1016/j.surfcoat.2013.12.026CrossRef

11.

T.F. Zhang, Q.Y. Deng, B. Liu, B.J. Wu, F.J. Jing, Y.X. Leng and N. Huang, Wear and Corrosion Properties of Diamond Like Carbon (DLC) Coating on Stainless Steel, CoCrMo and Ti6Al4V Substrates, Surf. Coat. Technol., 2015, 273, p 12–19. CrossRef

12.

B.X. de Freitas, C.A. Nunes and C. dos Santos, Sintering Behaviour of Co-28%Cr-6%Mo Compacted Blocks for Dental Prosthesis, J. Mater. Res. Technol., 2019, 8, p 2052–2062. https://doi.org/10.1016/j.jmrt.2018.12.020CrossRef

13.

W.C. Rodrigues, L.R. Broilo, L. Schaeffer, G. Knörnschild and F.R.M. Espinoza, Powder Metallurgical Processing of Co–28%Cr–6%Mo for Dental Implants: Physical, Mechanical and Electrochemical Properties, Powder Technol., 2011, 206, p 233–238. https://doi.org/10.1016/j.powtec.2010.09.024CrossRef

14.

G.L. Turdean, A. Craciun, D. Popa and M. Constantiniuc, Study of Electrochemical Corrosion of Biocompatible Co–Cr and Ni–Cr Dental Alloys in Artificial Saliva. Influence of pH of the Solution, Mater. Chem. Phys., 2019, 233, p 390–398. https://doi.org/10.1016/j.matchemphys.2019.05.041CrossRef

15.

Y. Say and B. Aksakal, Enhanced Corrosion Properties of Biological NiTi Alloy by Hydroxyapatite and Bioglass Based Biocomposite Coatings, J. Mater. Res. Technol., 2020, 9, p 1742–1749. https://doi.org/10.1016/j.jmrt.2019.12.005CrossRef

16.

C. García, S. Ceré and A. Durán, Bioactive Coatings Prepared by Sol–Gel on Stainless Steel 316L, J. Non. Cryst. Solids, 2004, 348, p 218–224. https://doi.org/10.1016/j.jnoncrysol.2004.08.172CrossRef

17.

M.M.M. López, J. Fauré, M.I.E. Cabrera and M.E.C. García, Structural Characterization and Electrochemical Behavior of 45S5 Bioglass Coating on Ti6Al4V Alloy for Dental Applications, Mater. Sci. Eng. B., 2016, 206, p 30–38. https://doi.org/10.1016/j.mseb.2015.09.003CrossRef

18.

V. Swaminathan and J.L. Gilbert, Potential and Frequency Effects on Fretting Corrosion of Ti6Al4V and CoCrMo Surfaces, J. Biomed. Mater. Res. Part A., 2013, 101A, p 2602–2612. https://doi.org/10.1002/jbm.a.34564CrossRef

19.

A.C. Lewis, M.R. Kilburn, I. Papageorgiou, G.C. Allen and C.P. Case, Effect of Synovial Fluid, Phosphate-Buffered Saline Solution, and Water on the Dissolution and Corrosion Properties of CoCrMo Alloys as Used in Orthopedic Implants, J. Biomed. Mater. Res. Part A., 2005, 73A, p 456–467. https://doi.org/10.1002/jbm.a.30368CrossRef

20.

ASTM C20-00, in Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water, 2015th ed., (ASTM International, West Conshohocken, PA, 2015). https://doi.org/10.1520/C0020-00R15.

21.

M.T. Dehaghani and M. Ahmadian, Porous Vitalium-Base Nano-Composite for Bone Replacement: Fabrication, Mechanical, and In Vitro Biological Properties, J. Mech. Behav. Biomed. Mater., 2016, 57, p 297–309. https://doi.org/10.1016/j.jmbbm.2016.01.026CrossRef

22.

M. Bahrami, M.H. Fathi and M. Ahmadian, The Effect of Nanobioceramic Reinforcement on Mechanical and Biological Properties of Co-Base Alloy/Hydroxyapatite Nanocomposite, Mater. Sci. Eng. C., 2015, 48, p 572–578. https://doi.org/10.1016/j.msec.2014.12.017CrossRef

23.

M. Taghian Dehaghani, M. Ahmadian and M. Fathi, Effect of Ball Milling on the Physical and Mechanical Properties of the Nanostructured Co–Cr–Mo Powders, Adv. Powder Technol., 2014, 25, p 1793–1799. https://doi.org/10.1016/j.apt.2014.07.009CrossRef

24.

G. Ryan, A. Pandit and D.P. Apatsidis, Fabrication Methods of Porous Metals for use in Orthopaedic Applications, Biomaterials, 2006, 27, p 2651–2670. https://doi.org/10.1016/j.biomaterials.2005.12.002CrossRef

25.

S. Fujino, H. Tokunaga, E. Saiz and A.P. Tomsia, Fabrication and Characterization of Bioactive Glass Coatings on Co-Cr Implant Alloys, Mater. Trans., 2004, 45, p 1147–1151. CrossRef

26.

J. Liu and X. Miao, Sol–gel Derived Bioglass as a Coating Material for Porous Alumina Scaffolds, Ceram. Int., 2004, 30, p 1781–1785. https://doi.org/10.1016/j.ceramint.2003.12.120CrossRef

27.

D.-M. Liu, Q. Yang and T. Troczynski, Sol–gel Hydroxyapatite Coatings on Stainless Steel Substrates, Biomaterials, 2002, 23, p 691–698. CrossRef

28.

J. Gallardo, A. Durán and J.J. de Damborenea, Electrochemical and In Vitro Behaviour of Sol–Gel Coated 316L Stainless Steel, Corros. Sci., 2004, 46, p 795–806. https://doi.org/10.1016/S0010-938X(03)00185-9CrossRef

29.

Y. Liu and B. Chen, In Vivo Corrosion of CoCrMo Alloy and Biological Responses: A Review, Mater. Technol., 2018, 33, p 127–134. https://doi.org/10.1080/10667857.2017.1408929CrossRef

30.

E. Liverani, A. Balbo, C. Monticelli, A. Leardini, C. Belvedere and A. Fortunato, Corrosion Resistance and Mechanical Characterization of Ankle Prostheses Fabricated Via Selective Laser Melting, Procedia CIRP., 2017, 65, p 25–31. CrossRef

31.

S. Karimi and A.M. Alfantazi, Ion Release and Surface Oxide Composition of AISI 316L, Co–28Cr–6Mo, and Ti–6Al–4V Alloys Immersed in Human Serum Albumin Solutions, Mater. Sci. Eng. C., 2014, 40, p 435–444. CrossRef

32.

B. Stojanović, C. Bauer, C. Stotter, T. Klestil, S. Nehrer, F. Franek and M. Rodríguez Ripoll, Tribocorrosion of a CoCrMo Alloy Sliding Against Articular Cartilage and the Impact of Metal Ion Release on Chondrocytes, Acta Biomater., 2019, 94, p 597–609. https://doi.org/10.1016/j.actbio.2019.06.015CrossRef

33.

S. Pourhashem and A. Afshar, Double Layer Bioglass-Silica Coatings on 316L Stainless Steel by Sol–Gel Method, Ceram. Int., 2014, 40, p 993–1000. https://doi.org/10.1016/j.ceramint.2013.06.096CrossRef

34.

D. Mareci, D. Sutiman, A. Cailean and G. Bolat, Comparative Corrosion Study of Ag-Pd and Co-Cr Alloys Used in Dental Applications, Bull. Mater. Sci., 2010, 33, p 491–500. CrossRef

35.

D.C. Romonţi, J. Iskra, M. Bele, I. Demetrescu and I. Milošev, Elaboration and Characterization of Fluorohydroxyapatite and Fluoroapatite Sol−Gel Coatings on CoCrMo Alloy, J. Alloys Compd., 2016, 665, p 355–364. CrossRef

36.

F. Baino, E. Fiume, M. Miola and E. Verné, Bioactive Sol-Gel Glasses: Processing, Properties, and Applications, Int. J. Appl. Ceram. Technol., 2018, 15, p 841–860. https://doi.org/10.1111/ijac.12873CrossRef

37.

J.R. Jones, Review of Bioactive Glass: From Hench to Hybrids, Acta Biomater., 2013, 9, p 4457–4486. https://doi.org/10.1016/j.actbio.2012.08.023CrossRef

38.

I.R. Oliveira, A.M. Barbosa, K.W. Santos, M.C. Lança, M.M.R.A. Lima, T. Vieira, J.C. Silva and J.P. Borges, Properties of Strontium-Containing BG 58S Produced by Alkali-Mediated Sol-Gel Process, Ceram. Int., 2022 https://doi.org/10.1016/j.ceramint.2022.01.002CrossRef

39.

M. Maximov, O.-C. Maximov, L. Craciun, D. Ficai, A. Ficai and E. Andronescu, Bioactive Glass—An Extensive Study of the Preparation and Coating Methods, Coatings, 2021, 11, p 1386. https://doi.org/10.3390/coatings11111386CrossRef

40.

S. Wu, X. Liu, T. Hu, J. Jiang, P.K. Chu, K.W.K. Yeung, C.Y. Chung, C.L. Chu, Z. Xu, W.W. Lu, K.M.C. Cheung and K.D.K. Luk, Electrochemical Stability of Orthopedic Porous NiTi Shape Memory Alloys Treated by Different Surface Modification Techniques, J. Electrochem. Soc., 2009, 156, p C187. https://doi.org/10.1149/1.3110945CrossRef

41.

S. Barison, S. Cattarin, S. Daolio, M. Musiani and A. Tuissi, Characterisation of Surface Oxidation of Nickel–Titanium Alloy by Ion-Beam and Electrochemical Techniques, Electrochim. Acta., 2004, 50, p 11–18. CrossRef

42.

A.W.E. Hodgson, Y. Mueller, D. Forster and S. Virtanen, Electrochemical Characterisation of Passive Films on Ti Alloys Under Simulated Biological Conditions, Electrochim. Acta., 2002, 47, p 1913–1923. CrossRef

43.

S. Karimi, T. Nickchi and A. Alfantazi, Effects of Bovine Serum Albumin on the Corrosion Behaviour of AISI 316L, Co–28Cr–6Mo, and Ti–6Al–4V Alloys in Phosphate Buffered Saline Solutions, Corros. Sci., 2011, 53, p 3262–3272. CrossRef

44.

M.İ Coşkun, İH. Karahan and T.D. Golden, Computer Assisted Corrosion Analysis of Hydroxyapatite Coated CoCrMo Biomedical Alloys, Surf. Coatings Technol., 2015, 275, p e1–e9. https://doi.org/10.1016/j.surfcoat.2015.05.037CrossRef

45.

U. Türkan, O. Öztürk and A.E. Eroğlu, Metal Ion Release From TiN Coated CoCrMo Orthopedic Implant Material, Surf. Coat. Technol., 2006, 200, p 5020–5027. CrossRef

46.

Y. Okazaki and E. Gotoh, Comparison of Metal Release from Various Metallic Biomaterials In Vitro, Biomaterials, 2005, 26, p 11–21. https://doi.org/10.1016/j.biomaterials.2004.02.005CrossRef

47.

X. Wang and C. Wen, Corrosion Protection of Mesoporous Bioactive Glass Coating on Biodegradable Magnesium, Appl. Surf. Sci., 2014, 303, p 196–204. CrossRef

48.

G. Herranz, C. Berges, J.A. Naranjo, C. García and I. Garrido, Mechanical Performance, Corrosion and Tribological Evaluation of a Co–Cr–Mo Alloy Processed by MIM for Biomedical Applications, J. Mech. Behav. Biomed. Mater., 2020, 105, p 103706. https://doi.org/10.1016/J.JMBBM.2020.103706CrossRef

Title: Corrosion and Metal Release Investigation of a Porous Biomedical Vitallium Alloy Coated with 58S Sol-Gel Bioactive Glass
Authors: Mohammad Reza Haftbaradaran-Esfahani
Mehdi Ahmadian
Masoud Atapour
Publication date: 31-05-2022
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 12/2022
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07017-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2022

Through-Thickness Fiber Formation Integrated into Carbon-Fiber-Reinforced Thermoplastic Laminate Welding Method

Effect of Electromagnetic Stirring Frequency on Inconel625-High Strength Low Alloy Steel Functionally Graded Material Fabricated by Wire Arc Additive Manufacturing

Insights on Microstructure and Failure Characteristics of Resistance Spot Welds of Galvannealed Dual Phase Steel

Heat Treatment Behaviour of SLM-Built Titanium Matrix Composite: Microstructure and Tribological Performance

Effect of Cooling Rate and Coiling Temperature on Microstructure and Precipitation Behavior of a 700 MPa Weathering Steel

Two-Step Sintering Improved Compaction of Electrophoretic-Deposited YSZ Coatings

Premium Partners