Journal of Materials Engineering and Performance 12/2022

27-05-2022 | Technical Article

Achieving an Optimal Balance of Strength and Elongation in AA 1050 Aluminum Alloy via Equal Channel Angular Pressing, Intermediate Annealing, and Post-Rolling

Peyman Ahmadian, Abbas Akbarzadeh, Parvaneh Asadi, Ashish Kumar Saxena

17-05-2022 | Technical Article

Heat Treatment Behaviour of SLM-Built Titanium Matrix Composite: Microstructure and Tribological Performance

Pankaj Kumar Verma, Sameer Warghane, Unissa Nichul, Hitesh Mehtani, Pawan Kumar, Vijay Hiwarkar

23-05-2022 | Technical Article

Increase in Mechanical Properties and Damping Capacity of a Cast Mn-Cu Damping Alloy Welded Joint by Pulsed Current TIG Welding

Jianxin Cui, Ning Li, Jiazhen Yan, Luo Zhou, Rongyu Lin, Yuntao Qu, Mingliang Luo

07-06-2022 | Technical Article

Hot Workability and Microstructural Evolution of Powder Metallurgy Ti-22Al-24Nb-0.5Mo Alloy during Hot Compression

Zichao Yu, Hua Zhang, Zhengjie Shao, Shangzhou Zhang, Jingjing Ruan, Lifei Wang, Xin Zhou, Lilong Zhu, Lei Xu

25-05-2022 | Technical Article

Through-Thickness Fiber Formation Integrated into Carbon-Fiber-Reinforced Thermoplastic Laminate Welding Method

D. Tatsuno, R. Tanaka, T. Yoneyama

18-05-2022 | Technical Article

Ultrasonic-Assisted Shearing Characteristics of Fe-Based Amorphous Alloy Strips

Qiusheng Yan, Yaxin Gao, Canlin Du, Zhen Yao, Yiqiang Mo

23-05-2022 | Technical Article

Dynamic and Static Precipitation Behaviors and Resultant Mechanical Properties of Al–15Zn–0.5Mg–0.5Sc Alloy

J. J. Xiao, C. Y. Liu, Z. J. Ge, W. Cheng, H. F. Huang

18-05-2022 | Technical Article

Effect of Different Rolling Passes on Microstructure and Mechanical Properties of M390 Powder Metallurgy High-Speed Steel

Hao Xu, Yi Shen, Rui Cao, Wei Li, Yalong Pang, Hongyan Che, Tiejun Wang, Chen Liang, Shaozun Liu, Wei Qin, Yingjie Yan

16-05-2022 | Technical Article

Studies on Microstructure Evolution, Mechanical, and Corrosion Behaviors of Cryorolled 316L Steel

Rahul Singh, Sunkulp Goel, R. Jayaganthan, Abhishek Kumar

22-06-2022 | Technical Article

Effect of Filler Wire on Laser Lap Welding of Al-Si Coated 22MnB5 Hot Stamping Steel

Feng Zhao, Youqiong Qin, Danfeng Zhang, Min Liang

13-05-2022 | Technical Article

Microstructure and Mechanical Properties of 2219 Aluminum Alloy/T2 Copper Explosively Welded Composite Plate

Dengkui Zhang, Zhisheng Wu, Yan Li, Linjie Liu

23-05-2022 | Technical Article

Effect of Hard Cyclic Viscoplastic Deformation on the Microstructure, Mechanical Properties, and Electrical Conductivity of Cu-Cr Alloy

Lembit Kommel, Jacques Huot, Babak Omranpour Shahreza

23-05-2022 | Technical Article

Effect of Electromagnetic Stirring Frequency on Inconel625-High Strength Low Alloy Steel Functionally Graded Material Fabricated by Wire Arc Additive Manufacturing

Jiarong Zhang, Xinjie Di, Chengning Li, Lingzhi Ba, Xing Jiang

23-05-2022 | Technical Article

Optimization of Welding Parameters During Ti-TA2/5A06Al Dissimilar Double-Sided Cold Arc Metal Inert Gas Welding

Linling Song, Shouzheng Wei, Wenji Rao, Zhiyong Li, Yingqiao Zhang

25-05-2022 | Technical Article

The Effects of Heat Treatment on Tensile and Thermal Expansion Behavior of Laser Powder-Bed Fusion Invar36

Issa Rishmawi, Allan Rogalsky, Mihaela Vlasea, Mehrnaz Salarian, Soheil Bakhshivash

20-05-2022 | Technical Article

Corrosion Behavior of Embedded Perforated Biodegradable Mg/Fe Composite Plate

Lu Chen, Honggang Xia, Peng Chen, Chunyong Liang, Hongshui Wang, Ning Liu

13-06-2022 | Technical Article

A Cost Effective Approach to Explore the Electrical Discharge Machined Surface Characteristics of Nimonic C263 Superalloy

Renu Kiran Shastri, Chinmaya P. Mohanty

24-05-2022 | Technical Article

Hydrothermal Sealing of Plasma Electrolytic Oxidation Coatings Developed on AZ31 Alloy

L. Toro, A. A Zuleta, E. Correa, F. Echeverría

27-06-2022 | Technical Article

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer

Fissha Biruke Teshome, Bei Peng, J. P. Oliveira, Sansan Ao, Wenchao Ke, Fuguo Ge, Zhi Zeng

27-05-2022 | Technical Article

Analyzing the Influence of Simultaneously Austenitization and Multi-Directional Boriding on the Surface and Subsurface of H13 Tool Steel

Fehmi Nair, Hafiz Muhammad Numan Zafar, A. Alper Cerit, M. Baki Karamış

02-06-2022 | Technical Article

Effects of Heat Treatment on Direct Laser Fabricated Stainless Steel 420-Inconel 718 Alloy Multi-material Structures

Beytullah Aydogan, Himanshu Sahasrabudhe

20-06-2022 | Technical Article

Experimental Investigations into the Mechanical and Metallurgical Characteristics of Friction Stir Welded AZ31 Magnesium Alloy

Virendra Pratap Singh, Basil Kuriachen

27-06-2022 | Technical Article

Effect of Annealing Before Aging on Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy

Chao Liu, Liang Liu, Jie Zheng, Zhaoming Yan, Zhimin Zhang, Qiang Wang, Xubin Li, Yong Xue

18-05-2022 | Technical Article

Microstructure and Properties of T6I4 Aged 700-MPa-Grade Aluminum Alloy

Yuntian Luo, Yuan Zhuang, Chen Li, Shuaidi Li, Guoning Bao, Tao Wei, Shaohui Sha, Xiaojing Xu

20-05-2022 | Technical Article

Effect of Aging on Transformation Behavior of Reverted Austenite and Toughness in Co-Free Maraging Stainless Steel

Chao Zhang, Chang Wang, Ao Wang, Chuanbo Zheng, Zhenbao Liu, Jianxiong Liang, Jie Su, Qilu Ge

20-05-2022 | Technical Article

Effect of Subsequent Heat Treatment on Nano-Tribological Behavior of the Co-Cr Medical Alloy Fabricated by Selective Laser Melting

Jichang Xiao, Jinxuan Zhu, Jiaxu Wang, Xiaofei He, Wei Wei

06-06-2022 | Technical Article

Influence of Heat Treatment on Microstructure and Properties of High-Velocity Arc-Sprayed Fe-Based-Al2O3-B4C Coating

Hao Li, Min Kang, Joseph Ndiithi Ndumia, Jinran Lin, Yin Zhang, Jitao Liu

18-05-2022 | Technical Article

Two-Step Sintering Improved Compaction of Electrophoretic-Deposited YSZ Coatings

Resetiana Dwi Desiati, Anawati Anawati, Eni Sugiarti

14-06-2022 | Technical Article

Rheology, Crystallinity, and Mechanical Investigation of Interlayer Adhesion Strength by Thermal Annealing of Polyetherimide (PEI/ULTEM 1010) Parts Produced by 3D Printing

Musa Yilmaz, Necip Fazil Yilmaz, Mahmut Furkan Kalkan

19-05-2022 | Technical Article

Different Effects of Body-Centered Cubic and Face-Centered Cubic Chromium Precipitations on Mechanical Properties and Wear Resistance of Cu-Cr-Zr Alloy

Dezhi Liu, Baoxu Huang, Changzheng Wang, Jie Ma, Xingchuan Zhao

10-05-2022 | Technical Article

The Influence of Different Phases on the Microstructure and Wear of Inconel-718 Surface Alloyed with AlCuNiFeCr Hard Particles Using Plasma Transferred Arc

N. Jeyaprakash, G. Prabu, Che-Hua Yang

19-05-2022 | Technical Article

Corrosion Response of Carbon Steel Exposed to Dynamic H2S Aqueous Solution in the Presence of Bicarbonate Ions and Natural Aeration

Shaohua Zhang, Ang Gao, Liming Mou, Yanrui Li, Shuo Yu, Yuezhong Zhang, Xiaoyan Yan, Baosheng Liu

13-05-2022 | Technical Article

Effect of Cr Addition on the Milling Process and Properties of Nanostructured Cu Alloys Prepared by Mechanical Alloying

Litao Han, Jianwei Liu, Huaguo Tang, Zixiang Yan

25-07-2022 | Technical Article

Effect of Drag Finish Post-processing on Surface Integrity and Wear Behavior of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Emrah Güneşsu, Mustafa Safa Yılmaz, Emre Taşcıoğlu, Safian Sharif, Yusuf Kaynak

23-05-2022 | Technical Article

Effect of Black Phosphorus Oxidation on Tribological Properties of Polytetrafluoroethylene-Based Composites

Zheng Wang, Lina Zhu, Guoxin Xie, Xiaoyong Ren

16-05-2022 | Technical Article

Reciprocating Wear of Ti-TiB In Situ Composites Synthesized via Vacuum Arc Melting

Ashwani Ranjan, Rajnesh Tyagi, Vikas Jindal

26-05-2022 | Technical Article

Enhanced Mechanical Properties and Corrosion Resistance by Minor Gd Alloying with a Hot-Extruded Mg Alloy

Huai Yao, Shubo Wang, Yi Xiong, Xinying Shi, Harishchandra Singh, Marko Huttula, Wei Cao

31-05-2022 | Technical Article

Corrosion and Metal Release Investigation of a Porous Biomedical Vitallium Alloy Coated with 58S Sol-Gel Bioactive Glass

Mohammad Reza Haftbaradaran-Esfahani, Mehdi Ahmadian, Masoud Atapour

03-06-2022 | Technical Article

Effect of Electromagnetic Force on the Strength of Electromagnetic Impulse Powder Compaction

Nadimetla Thirupathi, Ramesh Kumar, Sachin D. Kore

11-05-2022 | Technical Article

Dynamic Deformation of Low-Alloyed Transformation-Induced Plasticity-Aided Steel from Low to High Strain Rates

Z. Y. Tang, J. N. Huang, H. Ding, R. D. K. Misra

13-05-2022 | Technical Article

Damage Micromechanisms in Friction Stir-Welded DP600 Steel during Uniaxial Tensile Deformation

Hamid Ashrafi, Morteza Shamanian, Rahmatollah Emadi, Sayyed Erfan Aghili, Ehsan Ghassemali

31-05-2022 | Technical Article

Corrosion Behaviors of S355 Steel under Simulated Tropical Marine Atmosphere Conditions

Qingjun Zhu, Binbin Zhang, Meng Zheng, Xia Zhao, Jingwen Xu

31-05-2022 | Technical Article

Investigation of Microstructural, Mechanical, Wear, and Corrosion Properties of Mg-Sb-La Alloys

Selma Özarslan

14-06-2022 | Technical Article

Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

M. N. V. R. L. Kumar, R. Ramakrishnan

22-07-2022 | Technical Article

Mechanical Responses and Dynamic Recrystallization Mechanism of A356 Alloy during Single and Double Isothermal Compression Processes

Zhenglong Liang, Liqun Niu, Hao Li, Qi Zhang, Ke Huang

11-05-2022 | Technical Article

As-Cast High Entropy Shape Memory Alloys of (TiHfX)50(NiCu)50 with Large Recoverable Strain and Good Mechanical Properties

Guangwei Zhao, Da Li, Guoxiong Xu, Dong Fang, Yongsheng Ye, Caihua Huang, Zengmin Shi

20-05-2022 | Technical Article

Influence of Filler Metal on the Microstructure and Mechanical Properties of 316Ti–15-5 PH Stainless Steel Weld Joints

Ravi Ranjan Kumar, Randhir Kumar Singh, C. R. Anoop, Ranjan Das, S. V. S. Narayana Murty, K. Thomas Tharian, A. Alex

24-06-2022 | Technical Article

Microstructure, Mechanical, and Tribological Properties of Cr-Ti-Si-N Coatings

Zhiwei Wu, Ning Wang, Shulong Li

20-06-2022 | Technical Article

Insights on Microstructure and Failure Characteristics of Resistance Spot Welds of Galvannealed Dual Phase Steel

Kaushal Kishore, Pankaj Kumar, Goutam Mukhopadhyay

09-06-2022 | Technical Article

Effect of Rolling Schedule on Microstructure and Properties of Mg-Ca-Mn-Sn Sheet

Qinhong Fan, Yongyong Jia, Zhihui Cai, Lifeng Ma, Wei-tao Jia

22-06-2022 | Technical Article

Revealing the Relationship Between AlN Architectures and the Strengthening Mechanism of the AlN/Al Composites at 350 °C

Xia Ma, Yongfeng Zhao, Kewei Xie, Kai Zhao, Xiangfa Liu

18-05-2022 | Technical Article

Fracture Behavior of GTD-111 Superalloy during In Situ Tensile Scanning Electron Microscopy

Yinwei Wang, Pengchao Zhang, Morteza Taheri, Behzad Babaei

25-05-2022 | Technical Article

Microstructure and Mechanical Properties of Aluminum: Graphene Composites Produced by Powder Metallurgical Method

Rumyana Lazarova, Yana Mourjeva, Vesselin Petkov, Lubomir Anestiev, Marin Marinov, Rossitza Dimitrova, Daniela Shuleva

31-05-2022 | Technical Article

Characterization of Residual Stresses in Conventional Forming and Hydroforming of Tailor Welded Blanks

Amit Kumar, Ravi Kumar Digavalli, Vijay Gautam, Hariharan Krishnaswamy

27-06-2022 | Technical Article

Effects of Various Heat Inputs and Reheating Processes on the Microstructure and Properties of Low-Carbon Bainite Weld Metals Containing 4% Ni

Wanlong Dong, Chunwei Ma, Wei Li, Rui Cao, Chen Liang, Wanchao Zhu, Gaojun Mao, Xili Guo, Yong Jiang, Jianhong Chen

31-05-2022 | Technical Article

Corrosion Behavior of Atmospheric Plasma-Sprayed YAG/8YSZ Double Ceramic-Layered Thermal Barrier Coatings in a Calcium–Magnesium–Alumino-Silicate Melt

Chunling Li, Bo Cheng, Yi Zhang, Guosheng An, Yongjiang Sun, Yu Wang, Wensheng Li

23-06-2022 | Technical Article

Effect of Mo-Related Precipitation Behavior on the Strengthening and Thermal Stability of 4Cr5Mo2V Die Steel

Tao Hu, Riming Wu, Fangjie Li, Na Min, Wei Li

31-05-2022 | Technical Article

Effect of Cooling Rate and Coiling Temperature on Microstructure and Precipitation Behavior of a 700 MPa Weathering Steel

Li-ying Song, Xiu-hua Gao, Qi-he Xue, Jin-bo Li, Hong-yan Wu

19-05-2022 | Technical Article

High-Temperature Deformation Constitutive Model of Zircaloy-4 Based on the Support Vector Regression Algorithm during Hot Rolling

Yuan Cao, Jianguo Cao, Leilei Wang, Chunning Song, Fang Li, Pengfei Zhang

03-06-2022 | Technical Article

A New Dominance Distribution Method to Select Materials with Higher Fatigue Resistance under Property Scatter and Load Uncertainty

X. Bai, P. Zhang, Q. Wang, R. Liu, Z. J. Zhang, Q. Q. Duan, E. N. Yang, H. Bo, Z. F. Zhang

24-05-2022 | Technical Article

Neural Network Modeling of NiTiHf Shape Memory Alloy Transformation Temperatures

H. Abedi, K. S. Baghbaderani, A. Alafaghani, M. Nematollahi, F. Kordizadeh, M. M. Attallah, A. Qattawi, M. Elahinia

05-08-2022 | Technical Article

Analytical and Numerical Research on the Effect of Head Shape of Peening Medium on the Dimple Size, Plastic Region Depth and Residual Stress

Renfeng Zhao, Xudong Xiao, Tianyu Gao, Yong Li, Dan Qiao

31-05-2022 | Technical Article

A Hybrid Approximation to Wear Analysis in Electroless Ni-B Coatings: Conformity of Experimental and Finite Element Methods

Erhan Duru, M. Ömer İbiş, Yaşar Kahraman, Hatem Akbulut, Mehmet Uysal, Serdar Aslan

26-05-2022 | Technical Article

Effect of Shot Peening on the Ballistic Performance of Friction Stir Welded Magnesium Alloy (AZ31B) Joints

S. Dharani Kumar, S. Suresh Kumar

29-07-2022 | Technical Article

Fatigue Resistance Improvement on Double-Sided Welded Joints of a Titanium Alloy Treated by Laser Shock Peening

Xiaoan Hu, Jian Zhao, Xuefeng Teng, Xiangfan Nie, Yun Jiang, Yu Zhang

25-05-2022 | Technical Article

Mechanical and Corrosion Study of Gas Tungsten Arc Welding-Based SS-304L Wire Arc Additive Manufacturing Components, and the Effect of Sputtered (TiN) Coating on Their Corrosion Behavior

Umashankar Tripathi, Ankit Kumar, Manas Mohan Mahapatra, Rahul S. Mulik

03-06-2022 | Technical Article

Effect of the Coke/Flake Graphite Ratio on the Microstructure and Properties of Cu-Based Powder Metallurgy Friction Materials

Jianglei Fan, Ningge Wang, Xiao Wang, Yuanfeng Hao, Shen Wu, Yan Wang, Jianxiu Liu

31-05-2022 | Technical Article

Investigation of the Crevice Corrosion Behavior of 316L Stainless Steel in Sulfate-Reducing Bacteria-Inoculated Artificial Seawater Using the Wire Beam Electrode

Zhan Zhang, Cong Wu, Zhaopeng Wang, Jiuyang Xia, Bowei Zhang, Junsheng Wu

31-05-2022 | Technical Article

Structure and Electrochemical Behavior of AlN, AlTiN, and AlTiSiN Physical Vapor Deposition Coatings in 3% NaCl Solution

Anna Kameneva, Vladimir Kichigin, Natalia Bublik

Springer Professional

Table of Contents (73 Articles)

Achieving an Optimal Balance of Strength and Elongation in AA 1050 Aluminum Alloy via Equal Channel Angular Pressing, Intermediate Annealing, and Post-Rolling

Heat Treatment Behaviour of SLM-Built Titanium Matrix Composite: Microstructure and Tribological Performance

Increase in Mechanical Properties and Damping Capacity of a Cast Mn-Cu Damping Alloy Welded Joint by Pulsed Current TIG Welding

Hot Workability and Microstructural Evolution of Powder Metallurgy Ti-22Al-24Nb-0.5Mo Alloy during Hot Compression

Through-Thickness Fiber Formation Integrated into Carbon-Fiber-Reinforced Thermoplastic Laminate Welding Method

Ultrasonic-Assisted Shearing Characteristics of Fe-Based Amorphous Alloy Strips

Dynamic and Static Precipitation Behaviors and Resultant Mechanical Properties of Al–15Zn–0.5Mg–0.5Sc Alloy

Effect of Different Rolling Passes on Microstructure and Mechanical Properties of M390 Powder Metallurgy High-Speed Steel

Studies on Microstructure Evolution, Mechanical, and Corrosion Behaviors of Cryorolled 316L Steel

Effect of Filler Wire on Laser Lap Welding of Al-Si Coated 22MnB5 Hot Stamping Steel

Microstructure and Mechanical Properties of 2219 Aluminum Alloy/T2 Copper Explosively Welded Composite Plate

Effect of Hard Cyclic Viscoplastic Deformation on the Microstructure, Mechanical Properties, and Electrical Conductivity of Cu-Cr Alloy

Effect of Electromagnetic Stirring Frequency on Inconel625-High Strength Low Alloy Steel Functionally Graded Material Fabricated by Wire Arc Additive Manufacturing

Optimization of Welding Parameters During Ti-TA2/5A06Al Dissimilar Double-Sided Cold Arc Metal Inert Gas Welding

The Effects of Heat Treatment on Tensile and Thermal Expansion Behavior of Laser Powder-Bed Fusion Invar36

Corrosion Behavior of Embedded Perforated Biodegradable Mg/Fe Composite Plate

A Cost Effective Approach to Explore the Electrical Discharge Machined Surface Characteristics of Nimonic C263 Superalloy

Hydrothermal Sealing of Plasma Electrolytic Oxidation Coatings Developed on AZ31 Alloy

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer

Analyzing the Influence of Simultaneously Austenitization and Multi-Directional Boriding on the Surface and Subsurface of H13 Tool Steel

Effects of Heat Treatment on Direct Laser Fabricated Stainless Steel 420-Inconel 718 Alloy Multi-material Structures

Experimental Investigations into the Mechanical and Metallurgical Characteristics of Friction Stir Welded AZ31 Magnesium Alloy

Effect of Annealing Before Aging on Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy

Microstructure and Properties of T6I4 Aged 700-MPa-Grade Aluminum Alloy

Effect of Aging on Transformation Behavior of Reverted Austenite and Toughness in Co-Free Maraging Stainless Steel

Effect of Subsequent Heat Treatment on Nano-Tribological Behavior of the Co-Cr Medical Alloy Fabricated by Selective Laser Melting

Influence of Heat Treatment on Microstructure and Properties of High-Velocity Arc-Sprayed Fe-Based-Al2O3-B4C Coating

Two-Step Sintering Improved Compaction of Electrophoretic-Deposited YSZ Coatings

Rheology, Crystallinity, and Mechanical Investigation of Interlayer Adhesion Strength by Thermal Annealing of Polyetherimide (PEI/ULTEM 1010) Parts Produced by 3D Printing

Different Effects of Body-Centered Cubic and Face-Centered Cubic Chromium Precipitations on Mechanical Properties and Wear Resistance of Cu-Cr-Zr Alloy

The Influence of Different Phases on the Microstructure and Wear of Inconel-718 Surface Alloyed with AlCuNiFeCr Hard Particles Using Plasma Transferred Arc

Corrosion Response of Carbon Steel Exposed to Dynamic H2S Aqueous Solution in the Presence of Bicarbonate Ions and Natural Aeration

Effect of Cr Addition on the Milling Process and Properties of Nanostructured Cu Alloys Prepared by Mechanical Alloying

Effect of Drag Finish Post-processing on Surface Integrity and Wear Behavior of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Effect of Black Phosphorus Oxidation on Tribological Properties of Polytetrafluoroethylene-Based Composites

Reciprocating Wear of Ti-TiB In Situ Composites Synthesized via Vacuum Arc Melting

Enhanced Mechanical Properties and Corrosion Resistance by Minor Gd Alloying with a Hot-Extruded Mg Alloy

Corrosion and Metal Release Investigation of a Porous Biomedical Vitallium Alloy Coated with 58S Sol-Gel Bioactive Glass

Effect of Electromagnetic Force on the Strength of Electromagnetic Impulse Powder Compaction

Dynamic Deformation of Low-Alloyed Transformation-Induced Plasticity-Aided Steel from Low to High Strain Rates

Damage Micromechanisms in Friction Stir-Welded DP600 Steel during Uniaxial Tensile Deformation

Corrosion Behaviors of S355 Steel under Simulated Tropical Marine Atmosphere Conditions

Investigation of Microstructural, Mechanical, Wear, and Corrosion Properties of Mg-Sb-La Alloys

Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

Mechanical Responses and Dynamic Recrystallization Mechanism of A356 Alloy during Single and Double Isothermal Compression Processes

As-Cast High Entropy Shape Memory Alloys of (TiHfX)50(NiCu)50 with Large Recoverable Strain and Good Mechanical Properties

Influence of Filler Metal on the Microstructure and Mechanical Properties of 316Ti–15-5 PH Stainless Steel Weld Joints

Microstructure, Mechanical, and Tribological Properties of Cr-Ti-Si-N Coatings

Insights on Microstructure and Failure Characteristics of Resistance Spot Welds of Galvannealed Dual Phase Steel

Effect of Rolling Schedule on Microstructure and Properties of Mg-Ca-Mn-Sn Sheet

Revealing the Relationship Between AlN Architectures and the Strengthening Mechanism of the AlN/Al Composites at 350 °C

Fracture Behavior of GTD-111 Superalloy during In Situ Tensile Scanning Electron Microscopy

Microstructure and Mechanical Properties of Aluminum: Graphene Composites Produced by Powder Metallurgical Method

Characterization of Residual Stresses in Conventional Forming and Hydroforming of Tailor Welded Blanks

Effects of Various Heat Inputs and Reheating Processes on the Microstructure and Properties of Low-Carbon Bainite Weld Metals Containing 4% Ni

Corrosion Behavior of Atmospheric Plasma-Sprayed YAG/8YSZ Double Ceramic-Layered Thermal Barrier Coatings in a Calcium–Magnesium–Alumino-Silicate Melt

Effect of Mo-Related Precipitation Behavior on the Strengthening and Thermal Stability of 4Cr5Mo2V Die Steel

Effect of Cooling Rate and Coiling Temperature on Microstructure and Precipitation Behavior of a 700 MPa Weathering Steel

High-Temperature Deformation Constitutive Model of Zircaloy-4 Based on the Support Vector Regression Algorithm during Hot Rolling

A New Dominance Distribution Method to Select Materials with Higher Fatigue Resistance under Property Scatter and Load Uncertainty

Neural Network Modeling of NiTiHf Shape Memory Alloy Transformation Temperatures

Analytical and Numerical Research on the Effect of Head Shape of Peening Medium on the Dimple Size, Plastic Region Depth and Residual Stress

A Hybrid Approximation to Wear Analysis in Electroless Ni-B Coatings: Conformity of Experimental and Finite Element Methods

Effect of Shot Peening on the Ballistic Performance of Friction Stir Welded Magnesium Alloy (AZ31B) Joints

Fatigue Resistance Improvement on Double-Sided Welded Joints of a Titanium Alloy Treated by Laser Shock Peening

Mechanical and Corrosion Study of Gas Tungsten Arc Welding-Based SS-304L Wire Arc Additive Manufacturing Components, and the Effect of Sputtered (TiN) Coating on Their Corrosion Behavior

Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel

Oxidation Behavior of SiCf/SiC Minicomposites with Multilayered (BN/SiC)n Interfacial Coatings under Humid Environment

Effect of Grain Size on the Mechanical Properties and Formability of AA8021 Aluminum Foil

Cavitation Erosion Behavior of Nb Strengthened Duplex Stainless Steel Surfacing Layer

Effect of the Coke/Flake Graphite Ratio on the Microstructure and Properties of Cu-Based Powder Metallurgy Friction Materials

Investigation of the Crevice Corrosion Behavior of 316L Stainless Steel in Sulfate-Reducing Bacteria-Inoculated Artificial Seawater Using the Wire Beam Electrode

Structure and Electrochemical Behavior of AlN, AlTiN, and AlTiSiN Physical Vapor Deposition Coatings in 3% NaCl Solution

Current Publications

Issue 2/2023

Issue 1/2023

Issue 12/2022

Issue 11/2022