Top

The International Journal of Advanced Manufacturing Technology

Published in:

28-10-2021 | Critical Review

Damage study of fiber-reinforced composites drilled by abrasive waterjet —challenges and opportunities

Authors: Yifei Zhang, Dun Liu, Weijie Zhang, Hongtao Zhu, Chuanzhen Huang

Published in: The International Journal of Advanced Manufacturing Technology | Issue 1-2/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Owing to their excellent properties such as lightweight and high strength, fiber-reinforced composite materials are widely used as ideal materials for key structural components in extreme service environments (e.g., aviation, aerospace, and nuclear power). However, due to their non-uniformity and anisotropy, they have become typical difficult-to-machine materials, which are prone to cause damage during machining, thereby reducing the service life of the entire component. This review primarily summarizes the damage (including delamination, thermal damage, tool wear, and other processing damages) and suppression strategies of scholars in the process of traditional and non-traditional machining of fiber-reinforced composite materials in the past few years. Besides reviewing the research progress, the limitations of the current research were presented. From this review, it can be seen that traditional and non-traditional (e.g., laser machining) machining methods are difficult to avoid damage. Abrasive waterjet (AWJ) machining is a green and environmentally friendly machining technology. Some key issues are expected to be furtherly solved during the AWJ drilling of fiber-reinforced composite materials with low damage.

previous article Recent progress and evolution of coolant usages in conventional machining methods: a comprehensive review

next article Industry 4.0, transition or addition in SMEs? A systematic literature review on digitalization for deviation management

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

GE Aviation(2021). “GE9X Commercial aircraft engine”. https://www.geaviation.com/commercial/engines/ge9x-commercial-aircraft-engine. Accessed 16 September 2021

Rahman M, Ramakrishna S, Prakash JRS, Tan DCG (1999) Machinability study of carbon fiber reinforced composite. J Mater Process Technol 89–90:292–297. https://doi.org/10.1016/S0924-0136(99)00040-0CrossRef

Rajak DK, Pagar DD, Menezes PL, Linul E (2019) Fiber-reinforced polymer composites: manufacturing, properties, and applications. Polymers 11(10):1667. https://doi.org/10.3390/polym11101667CrossRef

Altenbach H, Altenbach J, Kissing W(2004)Classification of composite materials. In: Altenbach H, Altenbach J, Kissing W(ed) Mechanics of composite Structural Elements. Springer, Singapore, 1–14. https://doi.org/10.1007/978-3-662-08589-9_1

Çelik A, Lazoglu I, Kara A, Kara F (2015) Investigation on the performance of SiAlON ceramic drills on aerospace grade CFRP composites. J Mater Process Technol 223:39–47. https://doi.org/10.1016/j.jmatprotec.2015.03.040CrossRef

Abrão AM, Faria PE, Rubio JCC, Reis P, Davim JP (2007) Drilling of fiber reinforced plastics: a review. J Mater Process Technol 186(1–3):1–7. https://doi.org/10.1016/j.jmatprotec.2006.11.146CrossRef

Rajakumar IPT, Hariharan P, Vijayaraghavan L (2012) Drilling of carbon fibre reinforced plastic (CFRP) composites – a review. Int J Mater Prod Tec 43(1–4):43–67. https://doi.org/10.1504/IJMPT.2012.047647CrossRef

Panchagnula KK, Palaniyandi K (2018) Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review. J Mater Res Technol 7(2):180–189. https://doi.org/10.1016/j.jmrt.2017.06.003CrossRef

Geier N, Davim JP, Szalay T (2019) Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review. Compos Part A 125:105552. https://doi.org/10.1016/j.compositesa.2019.105552CrossRef

10.

Malik K, Ahmad F, Gunister E (2021) Drilling performance of natural fiber reinforced polymer composites: a review. J Nat Fibers. https://doi.org/10.1080/15440478.2020.1870624CrossRef

11.

Kim W, Lim SH, Kang D, Bae S, Yoonon S, Kim SS (2021) Research trends and future perspective in nonconventional machining of fiber-reinforced polymers: a review. Funct Compos Struct 3(2):022001. https://doi.org/10.1088/2631-6331/ac0c28CrossRef

12.

Hale J (2006) Boeing 787 from the ground up. Aero Magazine Boeing 4(24):17–23

13.

Kaneda H, Naitoh M, Imai T et al (2010) Cryogenic optical testing of an 800 mm lightweight C/SiC composite mirror mounted on a C/SiC optical bench. Appl Optics 49(20):3941–3948. https://doi.org/10.1364/AO.49.003941CrossRef

14.

General Atomics(2021). Accident Tolerant Fuel. https://www.ga.com/nuclear-fission/accident-tolerant-fuel. Accessed 16 September 2021

15.

Yang L, Liu H, Cheng H (2017) Processing-temperature dependent micro- and macro-mechanical properties of SiC fiber reinforced SiC matrix composites. Compos Part B 129:152–167. https://doi.org/10.1016/j.compositesb.2017.07.079CrossRef

16.

Ik B, Ekici E (2010) Experimental investigations of damage analysis in drilling of woven glass fiber-reinforced plastic composites. Int J Adv Manuf Technol 49(9–12):861–869. https://doi.org/10.1007/s00170-009-2440-xCrossRef

17.

Haeger A, Grudenik M, Hoffmann MJ, Knoblauch V (2019) Effect of drilling-induced damage on the open hole flexural fatigue of carbon/epoxy composites. Compos Struct 215:238–248. https://doi.org/10.1016/j.compstruct.2019.02.025CrossRef

18.

Gaitonde VN, Karnik SR, Campos RJ, Esteves CA, Abrão AM, Paulo DJ (2007) Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites. J Mater Process Technol 203(1–3):431–438. https://doi.org/10.1016/j.jmatprotec.2007.10.050CrossRef

19.

Faraz A, Biermann D, Weinert K (2009) Cutting edge rounding: an innovative tool wear criterion in drilling CFRP composite laminates. Int J Mach Tool Manu 49(15):1185–1196. https://doi.org/10.1016/j.ijmachtools.2009.08.002CrossRef

20.

Yashiro S, Ono R, Ogi K (2019) Effect of machining conditions on the trimming damage in composite laminates induced by out-of-plane shearing. J Mater Process Technol 271:463–475. https://doi.org/10.1016/j.jmatprotec.2019.04.025CrossRef

21.

Davim JP, Reis P (2003) Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments. Compos Struct 59(4):481–487. https://doi.org/10.1016/S0263-8223(02)00257-XCrossRef

22.

Qiu X, Li P, Li C, Niu Q, Chen A, Ouyang P, Ko TJ (2018) Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP. Compos Struct 203:404–413. https://doi.org/10.1016/j.compstruct.2018.07.007CrossRef

23.

Zhang H, Zhu P, Liu Z, Qi S, Zhu Y (2020) Research on prediction method of mechanical properties of open-hole laminated plain woven CFRP composites considering drilling-induced delamination damage. Mech Adv Mater Struc 1-16. https://doi.org/10.1080/15376494.2020.1745969

24.

Zhang D, Wang H, Burks AR, Cong W (2020) Delamination in rotary ultrasonic machining of CFRP composites: finite element analysis and experimental implementation. Int J Adv Manuf Technol 107:3847–3858. https://doi.org/10.1007/s00170-020-05310-0CrossRef

25.

Li WY, Huang Y, Chen XH, Zhang GJ, Rong YM, Lu Y (2021) Study on laser drilling induced defects of CFRP plates with different scanning modes based on multi-pass strategy. Opt Laser Technol 144:107400. https://doi.org/10.1016/j.optlastec.2021.107400CrossRef

26.

Persson E, Eriksson I, Zackrisson L (1997) Effects of hole machining defects on strength and fatigue life of composite laminates. Compos Part A 28(2):141–151. https://doi.org/10.1016/S1359-835X(96)00106-6CrossRef

27.

Tsao CC, Hocheng H (2005) Computerized tomography and C-scan for measuring delamination in the drilling of composite materials using various drills. Int J Mach Tool Manu 45(11):1282–1287. https://doi.org/10.1016/j.ijmachtools.2005.01.009CrossRef

28.

Khashaba UA (2004) Delamination in drilling GFR-thermoset composites. Compos Struct 63(3):313–327. https://doi.org/10.1016/S0263-8223(03)00180-6CrossRef

29.

Joshi S, Rawat K, Balan ASS (2018) A novel approach to predict the delamination factor for dry and cryogenic drilling of CFRP. J Mater Process Technol 262:521–531. https://doi.org/10.1016/j.jmatprotec.2018.07.026CrossRef

30.

Tan CL, Azmi AI, Muhammad N (2016) Delamination and surface roughness analyses in drilling hybrid carbon/glass composite. Mater Manuf Process 31(10):1366–1376. https://doi.org/10.1080/10426914.2015.1103864CrossRef

31.

Marques AT, Durão LM, Magalhães AG, Silva JF, Tavares JMRS (2009) Delamination analysis of carbon fibre reinforced laminates: evaluation of a special step drill. Compos Sci Technol 69(14):2376–2382. https://doi.org/10.1016/j.compscitech.2009.01.025CrossRef

32.

Abdul Nasir AA, Azmi AI, Khalil ANM (2015) Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites. Measurement 75:298–307. https://doi.org/10.1016/j.measurement.2015.07.046CrossRef

33.

Durão LMP, Gonçalves DJS, Tavares JMRS, Albuquerque VHC, Vieira AA, Marques AT (2009) Drilling tool geometry evaluation for reinforced composite laminates. Compos Struct 92(7):1545–1550. https://doi.org/10.1016/j.compstruct.2009.10.035CrossRef

34.

Zou F, Chen J, An Q, Cai X, Chen M (2020) Influences of clearance angle and point angle on drilling performance of 2D Cf/SiC composites using polycrystalline diamond tools. Ceram Int 46(4):4371–4380. https://doi.org/10.1016/j.ceramint.2019.10.161CrossRef

35.

Geng D, Liu Y, Shao Z, Zhang M, Jiang X, Zhang D (2020) Delamination formation and suppression during rotary ultrasonic elliptical machining of CFRP. Compos Part B 183(C):107698. https://doi.org/10.1016/j.compositesb.2019.107698CrossRef

36.

Xia T, Kaynak Y, Arvin C, Jawahir IS (2016) Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material. Int J Adv Manuf Technol 82(1–4):605–616. https://doi.org/10.1007/s00170-015-7284-yCrossRef

37.

Bhatnagar N, Nayak D, Singh I, Chouhan H, Mahajan P (2004) Determination of machining-induced damage characteristics of fiber reinforced plastic composite laminates. Mater Manuf Process 19(6):1009–1023. https://doi.org/10.1081/AMP-200035177CrossRef

38.

Feito N, López-Puente J, Santiuste C, Miguélez MH (2014) Numerical prediction of delamination in CFRP drilling. Compos Struct 108:677–683. https://doi.org/10.1016/j.compstruct.2013.10.014CrossRef

39.

Krishnamoorthy A, Mercy JL, Vineeth KSM, Salugu MK (2015) Delamination analysis of carbon fiber reinforced plastic (CFRP) composite plates by thermo graphic technique. Mater Today: Proc 2(4–5):3132–3139. https://doi.org/10.1016/j.matpr.2015.07.101CrossRef

40.

Zenia S, Ayed LB, Nouari M, Delamézière A (2015) An elastoplastic constitutive damage model to simulate the chip formation process and workpiece subsurface defects when machining CFRP composites. Procedia CIRP 31:100–105. https://doi.org/10.1016/j.procir.2015.03.100CrossRef

41.

Tang W, Chen Y, Yang H, Wang H, Yao Q (2018) Numerical investigation of delamination in drilling of carbon fiber reinforced polymer composites. Appl Compos Mater 25(6):1419–1439. https://doi.org/10.1007/s10443-018-9675-3CrossRef

42.

Shahri MN, Najafabadi MA, Akhlaghi M (2020) On the improvement of analytical delamination model for drilling of laminated composites using Galerkin method. Compos Part B 194:108021. https://doi.org/10.1016/j.compositesb.2020.108021CrossRef

43.

Liu S, Yang T, Liu C (2020) An analytical delamination model of drilling aramid fiber–reinforced plastics by brad drill. Int J Adv Manuf Technol 108:3279–3290. https://doi.org/10.1007/s00170-020-05628-9CrossRef

44.

De Morais WA, D’Almeida JRM, Godefroid LB (2003) Effect of the fiber reinforcement on the low energy impact behavior of fabric reinforced resin matrix composite materials. J Braz Soc Mech Sci 25(4):325–328. https://doi.org/10.1590/S1678-58782003000400002CrossRef

45.

Fahr A, Kandeil AY (1992) Ultrasonic C-scan inspection of composite materials. Eng J Qatar Univ 5:201–222

46.

Chadha V, Singari RM (2017) Optimization of cutting parameters on delamination using Taguchi method during drilling of GFRP composites. Proceedings of the International Multi Conference of Engineers and Computer Scientists, Vol II, IMECS 2017, March 15 - 17, 2017, Hong Kong

47.

Sorrentino L, Turchetta S, Colella L, Bellini C (2016) Analysis of thermal damage in FRP drilling. Procedia Eng 167:206–215. https://doi.org/10.1016/j.proeng.2016.11.689CrossRef

48.

Zhang H, Huang T, Liu Z, Zhang X, Lu J, Xiao R (2018) High fluence nanosecond laser machining of SiC p/AA2024 composite with high pressure assistant gas. J Manuf Process 31:560–567. https://doi.org/10.1016/j.jmapro.2017.12.020CrossRef

49.

Wang C, Zhang L, Liu Y, Cheng G, Zhang Q, Hua K (2013) Ultra-short pulse laser deep drilling of C/SiC composites in air. Appl Phys A-Mater 111(4):1213–1219. https://doi.org/10.1007/s00339-012-7377-5CrossRef

50.

Zhai Z, Wang W, Mei X, Li M, Cui J, Wang F, Pan A (2018) Effect of the surface microstructure ablated by femtosecond laser on the bonding strength of EBCs for SiC/SiC composites. Opt Commun 424:137–144. https://doi.org/10.1016/j.optcom.2018.04.055CrossRef

51.

Pan CT, Hocheng H (1998) The anisotropic heat-affected zone in the laser grooving of fiber-reinforced composite material. J Mater Process Technol 62(1):54–60. https://doi.org/10.1016/0924-0136(95)02192-2CrossRef

52.

Pan CT, Hocheng H (1998) Prediction of laser-induced thermal damage of fiber mat and fiber MatUD reinforced polymers. J Mater Eng Perform 7(6):751–756. https://doi.org/10.1361/105994998770347314CrossRef

53.

Hocheng H, Pan CT (2007) The effects of cryogenic surroundings on thermal-induced damage in laser grooving of fiber-reinforced plastic. Mach Sci Technol 3(1):77–90. https://doi.org/10.1080/10940349908945684CrossRef

54.

Muramatsu M, Harada Y, Suzuki T, Niino H (2015) Infrared stress measurements of thermal damage to laser-processed carbon fiber reinforced plastics. Compos Part A 68:242–250. https://doi.org/10.1016/j.compositesa.2014.08.033CrossRef

55.

Niino H, Harada Y, Fujisaki A (2017) Thermal damage of carbon fiber reinforced plastic by IR fiber laser irradiation. J Laser Micro/Nanoeng 12(3):235–238. https://doi.org/10.2961/jlmn.2017.03.0011CrossRef

56.

Díaz-Álvarez J, Olmedo A, Santiuste C, Miguélez M (2014) Theoretical estimation of thermal effects in drilling of woven carbon fiber composite. Materials 7(6):4442–4454. https://doi.org/10.3390/ma7064442CrossRef

57.

Li N, Li Y, Zhou J, He Z, Hao X (2015) Drilling delamination and thermal damage of carbon nanotube/carbon fiber reinforced epoxy composites processed by microwave curing. Int J Mach Tool Manu 97:11–17. https://doi.org/10.1016/j.ijmachtools.2015.06.005CrossRef

58.

Liu Y, Wang J, Li W, Wang C, Zhang Q, Yang X, Cheng L (2016) Effect of energy density and feeding speed on micro-holes drilling in SiC/SiC composites by picosecond laser. Int J Adv Manuf Technol 84(9–12):1917–1925. https://doi.org/10.1007/s00170-015-7844-1CrossRef

59.

Azmi AI (2015) Monitoring of tool wear using measured machining forces and neuro-fuzzy modelling approaches during machining of GFRP composites. Adv Eng Softw 82:53–64. https://doi.org/10.1016/j.advengsoft.2014.12.010CrossRef

60.

Wang X, Kwon PY, Sturtevant C, Kim DD-W, Lantrip J (2013) Tool wear of coated drills in drilling CFRP. J Manuf Process 15(1):127–135. https://doi.org/10.1016/j.jmapro.2012.09.019CrossRef

61.

Kuo C, Wang C, Ko S (2018) Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites. Wear 398–399:1–12. https://doi.org/10.1016/j.wear.2017.11.015CrossRef

62.

Xu J, Zhou L, Chen M, Ren F (2019) Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks. Mater Manuf Process 34(7):715–725. https://doi.org/10.1080/10426914.2019.1594275CrossRef

63.

Fernández-Pérez J, Cantero JL, Díaz-Álvarez J, Miguélez MH (2017) Influence of cutting parameters on tool wear and hole quality in composite aerospace components drilling. Compos Struct 178:157–161. https://doi.org/10.1016/j.compstruct.2017.06.043CrossRef

64.

Wang X, Shen X, Zeng C, Sun F (2018) Combined influences of tool shape and as-deposited diamond film on cutting performance of drills for CFRP machining. Surf Coat Technol 347:390–397. https://doi.org/10.1016/j.surfcoat.2018.05.024CrossRef

65.

Karpat Y, Değer B, Bahtiyar O (2012) Drilling thick fabric woven CFRP laminates with double point angle drills. J Mater Process Technol 212(10):2117–2127. https://doi.org/10.1016/j.jmatprotec.2012.05.017CrossRef

66.

Gaugel S, Sripathy P, Haeger A, Meinhard D, Bernthaler T, Lissek F, Kaufeld M, Knoblauch V, Schneider G (2016) A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers (CFRP). Compos Struct 155:173–183. https://doi.org/10.1016/j.compstruct.2016.08.004CrossRef

67.

Fernández-Pérez J, Cantero JL, Díaz-Álvarez J, Miguélez MH (2019) Tool wear and induced damage in CFRP drilling with step and double point angle drill bits. Procedia Manuf 41:610–617. https://doi.org/10.1016/j.promfg.2019.09.049CrossRef

68.

Ali YM, Wang J (2010) Impact abrasive machining. In:Jackson MJ, Davim JP (ed) Machining with abrasives. Springer, Boston, 385–419 https://doi.org/10.1007/978-1-4419-7302-3_9

69.

Ares PFM, Mata FG, Ponce MB, Gómez JS (2019) Defect analysis and detection of cutting regions in CFRP machining using AWJM. Materials 12(24). https://doi.org/10.3390/ma12244055

70.

Hashish M, Whalen J (1993) Precision drilling of ceramic-coated components with abrasive-waterjets. J Eng Gas Turb Power 115(1):148–154. https://doi.org/10.1115/1.2906669CrossRef

71.

Montesano J, Bougherara H, Fawaz Z (2017) Influence of drilling and abrasive water jet induced damage on the performance of carbon fabric/epoxy plates with holes. Compos Struct 163:257–266. https://doi.org/10.1016/j.compstruct.2016.12.007CrossRef

72.

Dhakal HN, Ismail SO, Ojo SO et al (2018) Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses. Int J Adv Manuf Technol 99(9–12):2833–2847. https://doi.org/10.1007/s00170-018-2670-xCrossRef

73.

Ramulu M, Jenkins MG, Guo Z (2001) Abrasive water jet machining mechanisms in continuous-fiber ceramic composites. J Compos Tech Res 23(2):82–91. https://doi.org/10.1520/CTR10916JCrossRef

74.

Ramulu M, Colligan K(2005) Edge finishing and delamination effects induced during abrasive waterjet machining on the compression strength of a graphite/epoxy composite. Proceedings of International Mechanical Engineering Congress and Exposition, IMECE 2005, November 5–11, 2005, Orlando, Florida USA

75.

Mayuet PF, Girot F, Lamíkiz A, Fernández-Vidal SR, Salguero J, Marcos M (2015) SOM/SEM based characterization of internal delaminations of CFRP samples machined by AWJM. Procedia Eng 132:693–700. https://doi.org/10.1016/j.proeng.2015.12.549CrossRef

76.

Alberdi A, Artaza T, Suárez A, Suárez A, Girot F (2016) An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations. Int J Adv Manuf Technol 86(1–4):691–704. https://doi.org/10.1007/s00170-015-8192-xCrossRef

77.

Li MJ, Huang MJ, Yang XJ, Li S, Wei K (2018) Experimental study on hole quality and its impact on tensile behavior following pure and abrasive waterjet cutting of plain woven CFRP laminates. Int J Adv Manuf Technol 99:2481–2490. https://doi.org/10.1007/s00170-018-2589-2CrossRef

78.

Schwartzentruber J, Spelt JK, Papini M (2018) Modelling of delamination due to hydraulic shock when piercing anisotropic carbon-fiber laminates using an abrasive waterjet. Int J Mach Tool Man 132:81–95. https://doi.org/10.1016/j.ijmachtools.2018.05.001CrossRef

79.

Schwartzentruber J, Papini M, Spelt JK (2018) Characterizing and modelling delamination of carbon-fiber epoxy laminates during abrasive waterjet cutting. Compos Part A 112:299–314. https://doi.org/10.1016/j.compositesa.2018.06.014CrossRef

80.

Nyaboro JN, Ahmed MA, El-Hofy H, El-Hofy M (2020) Fluid-structure interaction modeling of the abrasive waterjet drilling of carbon fiber reinforced polymers. J Manuf Process 58:551–562. https://doi.org/10.1016/j.jmapro.2020.08.035CrossRef

81.

Thongkaew K, Wang J, Li W (2019) An investigation of the hole machining processes on woven carbon-fiber reinforced polymers (CFRPs) using abrasive waterjets. Mach Sci Technol 23(1):19–38. https://doi.org/10.1080/10910344.2018.1449217CrossRef

82.

Deepak D, Ashwin PK (2019) Study on abrasive water jet drilling for graphite filled glass/epoxy laminates. J Mech Eng Sci 13(2):5126–5136. https://doi.org/10.15282/jmes.13.2.2019.24.0421CrossRef

83.

Li M, Huang M, Chen Y, Kai W, Yang X (2019) Experimental study on hole characteristics and surface integrity following abrasive waterjet drilling of Ti6Al4V/CFRP hybrid stacks. Int J Adv Manuf Technol 104(9–12):4779–4789. https://doi.org/10.1007/s00170-019-04334-5CrossRef

84.

Kim G, Denos BR, Sterkenburg R (2020) Influence of different piercing methods of abrasive waterjet on delamination of fiber reinforced composite laminate. Compos Struct 240:112065. https://doi.org/10.1016/j.compstruct.2020.112065CrossRef

85.

Altin Karataş M, Motorcu AR, Gökkaya H (2021) Study on delamination factor and surface roughness in abrasive water jet drilling of carbon fiber-reinforced polymer composites with different fiber orientation angles. J Braz Soc Mech Sci 43(1):22. https://doi.org/10.1007/s40430-020-02741-4CrossRef

86.

Hoekstra B, Kolasangiani K, Oguamanam DCD, Bougherara H (2021) Mechanical characterization and damage analysis of carbon/flax hybrid laminates with holes machined by abrasive water jet. J Nat Fibers. https://doi.org/10.1080/15440478.2021.1941491CrossRef

87.

Liu D, Huang C, Wang J, Zhu H, Yao P, Liu Z (2014) Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box-Behnken design. Ceram Int 40(6):7899–7908. https://doi.org/10.1016/j.ceramint.2013.12.137CrossRef

88.

Liu D, Huang C, Wang J, Zhu H, Yao P, Liu Z (2013) Study on the effect of standoff distance on processing performance of alumina ceramics in two modes of abrasive waterjet turning patterns. Adv Mater Res 797:21–26. https://doi.org/10.4028/www.scientific.net/AMR.797.21CrossRef

89.

Liu D, Zhu H, Huang C, Wang J, Yao P (2016) Prediction model of depth of penetration for alumina ceramics turned by abrasive waterjet—finite element method and experimental study. Int J Adv Manuf Technol 87(9):2673–2682. https://doi.org/10.1007/s00170-016-8600-xCrossRef

90.

Liu D, Huang C, Zhu H, Wang J, Yao P (2016) Investigation on material response to ultrahigh velocity impact on ceramics by micro particle. Tribol Lett 64(3):1–13. https://doi.org/10.1007/s11249-016-0779-3CrossRef

91.

Liu D, Huang C, Wang J, Zhu H (2021) Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach. Ceram Int 47(11):15165–15172. https://doi.org/10.1016/j.ceramint.2021.02.076CrossRef

92.

Liu D, Nguyen T, Wang J, Huang C (2020) Mechanisms of enhancing the machining performance in micro abrasive waterjet drilling of hard and brittle materials by vibration assistance. Int J Mach Tool Manu 151:103528. https://doi.org/10.1016/j.ijmachtools.2020.103528CrossRef

93.

Shanmugam DK, Nguyen T, Wang J (2008) A study of delamination on graphite/epoxy composites in abrasive waterjet machining. Compos Part A 39(6):923–929. https://doi.org/10.1016/j.compositesa.2008.04.001CrossRef

Title: Damage study of fiber-reinforced composites drilled by abrasive waterjet —challenges and opportunities
Authors: Yifei Zhang
Dun Liu
Weijie Zhang
Hongtao Zhu
Chuanzhen Huang
Publication date: 28-10-2021
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 1-2/2022
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-08246-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1-2/2022

Effect of Co and Fe contents on the microstructure and corrosion behaviour of heat-treated Ni-Fe-Co superalloys in 3.5 wt% NaCl aqueous solution

Modeling and optimization of welding fixtures for a high-speed train aluminum alloy sidewall based on the response surface method

Effect of welding heat input on pores in laser-arc hybrid welding of high nitrogen steel

Modeling of critical cutting speed of white layer formation in the hard-cutting process

Manufacturing of Ti6Al4V alloy part reinforced by silicon carbide fibers by laser powder bed fusion with following hot isostatic pressing

Comparative LCA of automotive gear hobbing processes with flood lubrication and MQL

Premium Partners