Top

Applied Composite Materials

Published in:

04-10-2017

Design and modeling of a combined embedded enhanced honeycomb with tunable mechanical properties

Authors: Yu Chen, Ming-Hui Fu

Published in: Applied Composite Materials | Issue 5/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Honeycomb structures are increasingly being used in many important fields. A novel combined embedded enhanced honeycomb (CEEH) in developed in this paper based on the two existing embedded enhanced honeycombs, the single rib embedded enhanced honeycomb (SREEH) and the rhombic grid embedded enhanced honeycomb (RGEEH). Analytical model related to the in-plane Young’s modulus and Poisson’s ratio is built and validated by using two different finite element (FE) models (3D beam model and 3D solid model). The in-plane elastic behavior of the honeycomb is also investigated against the geometrical parameters by using the numerically validated analytical solutions. The results show that the new CEEH can achieve a wide range value of Poisson’s ratio and Young’s modulus by tailoring geometric parameters. The results also show that the new CEEH exhibits higher x- directional specific stiffness than SREEH while higher y- directional specific stiffness than RGEEH. Moreover, the new CEEH can weaken even eliminate the difference between the two principal directions which can be hardly achieved by the SREEH and RGEEH. Given these advantages, this new design may be promising in some applications. This work provides a new insight into the designs of embedded enhanced honeycombs.

previous article Damage evaluation of laminated composite material using a new acoustic emission Lamb-based and finite element techniques

next article Parameters Identification of Interface Friction Model for Ceramic Matrix Composites Based on Stress-Strain Response

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Gibson, L.J., Ashby, M.F.: Cellular Solids: Structure and Properties. Cambridge University Press, Cambridge (1999)

Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., Lu, T.J.: Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation. Prog. Mater. Sci. 74, 332–400 (2015)CrossRef

Ingrole, A., Hao, A., Liang, R.: Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement. Mater. Des. 117, 72–83 (2017)CrossRef

Carneiro, V.H., Meireles, J., Puga, H.: Auxetic materials — A review. Mater. Sci. Pol. 31(4), 561–571 (2013)CrossRef

Grima, J.N., Attard, D., Gatt, R., Cassar, R.N.: A novel process for the manufacture of auxetic foams and for their re-convention to conventional form. Adv. Eng. Mater. 11(7), 533–535 (2010)CrossRef

Lakes, R.: Foam Structures with a Negative Poisson's Ratio. Sci. 235(4792), 1038–1040 (1987)CrossRef

Evans, K.E., Nkansah, M.A., Hutchinson, I.J., ROGERS, S.C.: Molecular network design. Nat. 353(6340), 124–124 (1991)CrossRef

Kolken, H.M.A., Zadpoor, A.A.: Auxetic mechanical metamaterials. RSC Adv. 7(9), 5111–5129 (2017)CrossRef

Mousanezhad, D., Babaee, S., Ebrahimi, H., Ghosh, R., Hamouda, A.S., Bertoldi, K., Vaziri, A.: Hierarchical honeycomb auxetic metamaterials. Sci Rep. 5, 18306 (2015)CrossRef

10.

Bertoldi, K., Reis, P.M., Willshaw, S., Mullin, T.: Negative Poisson's ratio behavior induced by an elastic instability. Adv. Mater. 22(3), 361–366 (2010)CrossRef

11.

Ghaedizadeh, A., Shen, J., Ren, X., Xie, Y.: Tuning the Performance of Metallic Auxetic Metamaterials by Using Buckling and Plasticity. Mater. 9(1), 1–27 (2016)CrossRef

12.

Argatov, I.I., Guinovart-Díaz, R., Sabina, F.J.: On local indentation and impact compliance of isotropic auxetic materials from the continuum mechanics viewpoint. Int. J. Eng. Sci. 54(5), 42–57 (2012)CrossRef

13.

Coenen, V.L., Alderson, K.L.: Mechanisms of failure in the static indentation resistance of auxetic carbon fibre laminates. Phys. Status Solidi B. 248(1), 66–72 (2011)CrossRef

14.

Evans, K.E., Alderson, A.: Auextic materials: functional materials and structures from lateral thinking! Adv. Mater. 12(9), 617–628 (2000)CrossRef

15.

Mohsenizadeh, S., Alipour, R., Rad, M.S., Nejad, A.F., Ahmad, Z.: Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading. Mater. Des. 88, 258–268 (2015)CrossRef

16.

Hou, S., Liu, T., Zhang, Z., Han, X., Li, Q.: How does negative Poisson’s ratio of foam filler affect crashworthiness? Mater. Des. 82, 247–259 (2015)CrossRef

17.

Choi, J.B., Lakes, R.S.: Fracture toughness of re-entrant foam materials with a negative Poisson's ratio: experiment and analysis. Int. J. Fract. 80(1), 73–83 (1996)CrossRef

18.

Prawoto, Y.: Seeing auxetic materials from the mechanics point of view: a structural review on the negative Poisson’s ratio. Comput. Mater. Sci. 58, 140–153 (2012)CrossRef

19.

Masters, I.G., Evans, K.E.: Models for the elastic deformation of honeycombs. Compos. Struct. 35(4), 403–422 (1996)CrossRef

20.

Grima, J.N., Attard, D., Ellul, B., Gatt, R.: An improved analytical model for the elastic constants of auxetic and conventional hexagonal honeycombs. Cell. Polym. 30(6), 287–310 (2011)CrossRef

21.

Scarpa, F., Panayiotou, P., Tomlinson, G.: Numerical and experimental uniaxial loading on in-plane auxetic honeycombs. J. Strain Anal. Eng. Des. 35(35), 383–388 (2000)CrossRef

22.

Hu, L.L., Deng, H.: Indentation resistance of the re-entrant hexagonal honeycombs with negative poisson’s ratio. Mater. Res. Innov. 19(S1), S1-442–S1-445 (2015)CrossRef

23.

Wan, H., Ohtaki, H., Kotosaka, S., Hu, G.M.: A study of negative Poisson's ratios in auxetic honeycombs based on a large deflection model. Eur. J. Mech. A. Solids. 23(1), 95–106 (2004)CrossRef

24.

Fu, M.H., Xu, O.T., Hu, L.L., Yu, T.X.: Nonlinear shear modulus of re-entrant hexagonal honeycombs under large deformation. Int. J. Solids Struct. 80, 284–296 (2015)CrossRef

25.

Liu, W., Wang, N., Luo, T., Lin, Z.: In-plane dynamic crushing of re-entrant auxetic cellular structure. Mater. Des. 100, 84–91 (2016)CrossRef

26.

Boldrin, L., Hummel, S., Scarpa, F., Di Maio, D., Lira, C., Ruzzene, M., Remillat, C.D.L., Lim, T.C., Rajasekaran, R., Patsias, S.: Dynamic behaviour of auxetic gradient composite hexagonal honeycombs. Compos. Struct. 149, 114–124 (2016)CrossRef

27.

Zied, K., Osman, M., Elmahdy, T.: Enhancement of the in-plane stiffness of the hexagonal re-entrant auxetic honeycomb cores. Phys. Status Solidi B. 252(12), 2685–2692 (2015)CrossRef

28.

Li, D., Ma, J., Dong, L., Lakes, R.S.: Stiff square structure with a negative Poisson’s ratio. Mater. Lett. 188, 149–151 (2017)CrossRef

29.

Lu, Z.X., Li, X., Yang, Z.Y., Xie, F.: Novel structure with negative Poisson’s ratio and enhanced Young’s modulus. Compos. Struct. 138, 243–252 (2016)CrossRef

30.

Fu, M.H., Chen, Y., Hu, L.L.: Bilinear elastic characteristic of enhanced auxetic honeycombs. Compos. Struct. 175, 101–110 (2017)CrossRef

31.

Grima, J.N., Oliveri, L., Attard, D., Ellul, B., Gatt, R., Cicala, G., Recca, G.: Hexagonal Honeycombs with Zero Poisson's Ratios and Enhanced Stiffness. Adv. Eng. Mater. 12(9), 855–862 (2010)CrossRef

32.

Lira, C., Scarpa, F.: Transverse shear stiffness of thickness gradient honeycombs. Compos. Sci. Technol. 70(6), 930–936 (2010)CrossRef

33.

Assidi, M., Ganghoffer, J.F.: Composites with auxetic inclusions showing both an auxetic behavior and enhancement of their mechanical properties. Compos. Struct. 94(8), 2373–2382 (2012)CrossRef

34.

Poźniak, A.A., Wojciechowski, K.W., Grima, J.N., Mizzi, L.: Planar auxeticity from elliptic inclusions. Compos. Part B. 94, 379–388 (2016)CrossRef

35.

Bückmann, T., Stenger, N., Kadic, M., Kaschke, J., Frölich, A., Kennerknecht, T., Eberl, C., Thiel, M., Wegener, M.: Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography. Adv. Mater. 24(20), 2710–2714 (2012)CrossRef

36.

Yang, L., Harrysson, O., West, H., Cormier, D.: Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure. J. Mater. Sci. 48(4), 1413–1422 (2013)CrossRef

37.

Yang, L., Harrysson, O., West, H., Cormier, D.: Mechanical properties of 3D reentrant honeycomb auxetic structures realized via additive manufacturing. Int. J. Solids Struct. 69–70, 475–490 (2015)CrossRef

38.

Wang, K., Chang, Y.H., Chen, Y.W., Zhang, C., Wang, B.: Designable dual-material auxetic metamaterials using three-dimensional printing. Mater. Des. 67, 159–164 (2015)CrossRef

39.

Wang, X.T., Li, X.W., Ma, L.: Interlocking assembled 3D auxetic cellular structures. Mater. Des. 99, 467–476 (2016)CrossRef

40.

Wang, X.T., Wang, B., Li, X.W., Ma, L.: Mechanical properties of 3D re-entrant auxetic cellular structures. Int. J. Mech. Sci. 131–132, 396–407 (2017)CrossRef

41.

Fu, M.H., Chen, Y., Hu, L.L.: A novel auxetic honeycomb with enhanced in-plane stiffness and buckling strength. Compos. Struct. 160, 574–585 (2016)CrossRef

42.

Ştefan, S., Sandu, M., Sandu, A., Dan, M.C.: Finite Element Models Used to Determine the Equivalent In-plane Properties of Honeycombs. Mater. Today Proc. 3(4), 1161–1166 (2016)CrossRef

43.

Sun, C.T., Vaidya, R.S.: Prediction of composite properties from a representative volume element. Compos. Sci. Technol. 56(2), 171–179 (1996)CrossRef

44.

Grenestedt, J.L.: Effective elastic behavior of some models for perfect cellular solids. Int. J. Solids Struct. 36(10), 1471–1501 (1999)CrossRef

Title: Design and modeling of a combined embedded enhanced honeycomb with tunable mechanical properties
Authors: Yu Chen
Ming-Hui Fu
Publication date: 04-10-2017
Publisher: Springer Netherlands
Published in: Applied Composite Materials / Issue 5/2018
Print ISSN: 0929-189X
Electronic ISSN: 1573-4897
DOI: https://doi.org/10.1007/s10443-017-9650-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5/2018

Study on Mechanical Behavior of CVD-SiC Coated C/SiC Composites under Simulated Space Environments

Numerical Identification of Meso Length-Effect and Full-Field Edge-Effect of 3D Braided Composites

Numerical Study on the Tensile Behavior of 3D Four Directional Cylindrical Braided Composite Shafts

Efficient Permeability Measurement and Numerical Simulation of the Resin Flow in Low Permeability Preform Fabricated by Automated Dry Fiber Placement

Transverse Tensile Properties of 3 Dimension-4 Directional Braided Cf/SiC Composite Based on Double-Scale Model

Modeling and Simulation of Voids in Composite Tape Winding Process Based on Domain Superposition Technique

Premium Partners