Top

Journal of Materials Science

Published in:

07-05-2020 | Review

Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review

Authors: Jing Shi, Yachao Wang

Published in: Journal of Materials Science | Issue 23/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Metal matrix composites (MMCs) generally possess superior properties than the monotonic matrix alloys, and thus, they have become excellent candidate materials in various applications. Also, the ability of property tailoring at an affordable cost is of particular importance to industries. Among the many manufacturing techniques for MMCs, laser-assisted additive manufacturing (AM) techniques have emerged and drawn increasing attention in the past decade. In the literature, a wealth of studies have been carried out on the synthesis of MMCs via laser-assisted AM techniques, as well as the property evaluation of the obtained MMCs. In this paper, we review and analyze the relevant literature and summarize the material preparation, optimization of process parameters, resultant improvements, and corresponding strengthening mechanisms for each major category of MMCs. Moreover, the limitations and challenges related to MMC synthesis using the laser-assisted AM techniques are discussed, and the future research directions are suggested to address those issues.

previous article A review on micromechanical methods for evaluation of mechanical behavior of particulate reinforced metal matrix composites

next article Recent advances in synthesis and application of organic near-infrared fluorescence polymers

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Ibrahim IA, Mohamed FA, Lavernia EJ (1991) Particulate reinforced metal matrix composites: a review. J Mater Sci 26:1137–1156. https://doi.org/10.1007/BF00544448 CrossRef

Chawla N, Shen YL (2001) Mechanical behavior of particle reinforced metal matrix composites. Adv Eng Mater 3:357–370. https://doi.org/10.1002/1527-2648(200106)3:6%3c357:AID-ADEM357%3e3.0.CO;2-I CrossRef

Cyriac AJ (2011) Metal matrix composites: history, status, factors and future (Doctoral dissertation, Oklahoma State University)

Qu XH, Zhang L, Wu M, Bin RS (2011) Review of metal matrix composites with high thermal conductivity for thermal management applications. Prog Nat Sci Mater Int 21:189–197. https://doi.org/10.1016/S1002-0071(12)60029-X CrossRef

Campbell I, Diegel O, Kowen J, Wohlers T (2019) Wohlers Report 2019: 3D printing and additive manufacturing state of the industry: annual worldwide progress report, Wohlers Associates

Standard A (2013) F2792-12a: standard terminology for additive manufacturing technologies (ASTM International, West Conshohocken, PA, 2012). P Jain, AM Kuthe, Feasibility study Manuf using rapid Prototyp FDM approach. Procedia Eng 63:4–11

Bhavar V, Kattire P, Patil V et al (2017) A review on powder bed fusion technology of metal additive manufacturing. In: Additive manufacturing handbook, CRC Press, Boca Raton, pp 251–253CrossRef

Sercombe TB, Li X (2016) Selective laser melting of aluminium and aluminium metal matrix composites. Mater Technol 31:77–85. https://doi.org/10.1179/1753555715Y.0000000078 CrossRef

Song B, Dong S, Coddet P et al (2013) Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting. J Alloys Compd 579:415–421. https://doi.org/10.1016/j.jallcom.2013.06.087 CrossRef

10.

Xavior MA (2014) Graphene reinforced metal matrix composite (GRMMC): a review. In: Procedia engineering, Vellore, India, pp 1033–1040

11.

Jiang J, He X, Du J et al (2018) In-situ fabrication of graphene-nickel matrix composites. Mater Lett 220:178–181. https://doi.org/10.1016/j.matlet.2018.03.039 CrossRef

12.

Ghosh SK, Saha P, Kishore S (2010) Influence of size and volume fraction of SiC particulates on properties of ex situ reinforced Al–4.5Cu–3 Mg metal matrix composite prepared by direct metal laser sintering process. Mater Sci Eng, A 527:4694–4701. https://doi.org/10.1016/j.msea.2010.03.108 CrossRef

13.

Simchi A, Godlinski D (2008) Effect of SiC particles on the laser sintering of Al–7Si–0.3 Mg alloy. Scr Mater 59:199–202. https://doi.org/10.1016/j.scriptamat.2008.03.007 CrossRef

14.

Manfredi D, Calignano F, Krishnan M et al (2014) Additive manufacturing of Al alloys and aluminium matrix composites (AMCs). Light Met Alloy Appl 11:3–34. https://doi.org/10.5772/57069 CrossRef

15.

Gu D, Chang F, Dai D (2015) Selective laser melting additive manufacturing of novel aluminum based composites with multiple reinforcing phases. J Manuf Sci Eng. https://doi.org/10.1115/1.4028925 CrossRef

16.

Gu D, Wang H, Dai D et al (2015) Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting. Scr Mater 96:25–28. https://doi.org/10.1016/j.scriptamat.2014.10.011 CrossRef

17.

Gu D, Wang H, Dai D et al (2015) Densification behavior, microstructure evolution, and wear property of TiC nanoparticle reinforced AlSi10Mg bulk-form nanocomposites prepared by selective laser melting. J Laser Appl 27:S17003. https://doi.org/10.2351/1.4870877 CrossRef

18.

Dubourg L, Ursescu D, Hlawka F, Cornet A (2005) Laser cladding of MMC coatings on aluminium substrate: influence of composition and microstructure on mechanical properties. Wear 258:1745–1754. https://doi.org/10.1016/j.wear.2004.12.010 CrossRef

19.

Dadbakhsh S, Hao L (2012) Effect of hot isostatic pressing (HIP) on Al composite parts made from laser consolidated Al/Fe₂O₃ powder mixtures. J Mater Process Technol 212:2474–2483. https://doi.org/10.1016/j.jmatprotec.2012.06.016 CrossRef

20.

Dadbakhsh S, Hao L, Jerrard PGE, Zhang DZ (2012) Experimental investigation on selective laser melting behaviour and processing windows of in situ reacted Al/Fe₂O₃ powder mixture. Powder Technol 231:112–121. https://doi.org/10.1016/j.powtec.2012.07.061 CrossRef

21.

Han Q, Setchi R, Lacan F et al (2017) Selective laser melting of advanced Al-Al₂O₃ nanocomposites: simulation, microstructure and mechanical properties. Mater Sci Eng, A 698:162–173. https://doi.org/10.1016/j.msea.2017.05.061 CrossRef

22.

Sercombe TB, Schaffer GB (2004) On the role of tin in the infiltration of aluminium by aluminium for rapid prototyping applications. Scr Mater 51:905–908. https://doi.org/10.1016/j.scriptamat.2004.06.032 CrossRef

23.

Yu P, Schaffer GB (2009) Microstructural evolution during pressureless infiltration of aluminium alloy parts fabricated by selective laser sintering. Acta Mater 57:163–170. https://doi.org/10.1016/j.actamat.2008.08.065 CrossRef

24.

Dai D, Gu D (2016) Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi10Mg composites. Int J Mach Tools Manuf 100:14–24. https://doi.org/10.1016/j.ijmachtools.2015.10.004 CrossRef

25.

Li XP, Ji G, Chen Z et al (2017) Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility. Acta Mater 129:183–193. https://doi.org/10.1016/j.actamat.2017.02.062 CrossRef

26.

Famodimu OH, Stanford M, Oduoza CF, Zhang L (2018) Effect of process parameters on the density and porosity of laser melted AlSi10Mg/SiC metal matrix composite. Front Mech Eng 13:520–527. https://doi.org/10.1007/s11465-018-0521-y CrossRef

27.

Jiang LY, Liu TT, Zhang CD et al (2018) Preparation and mechanical properties of CNTs-AlSi10Mg composite fabricated via selective laser melting. Mater Sci Eng, A 734:171–177. https://doi.org/10.1016/j.msea.2018.07.092 CrossRef

28.

Zhao X, Song B, Fan W et al (2016) Selective laser melting of carbon/AlSi10Mg composites: microstructure, mechanical and electronical properties. J Alloys Compd 665:271–281. https://doi.org/10.1016/j.jallcom.2015.12.126 CrossRef

29.

Wang Y, Shi J, Lu S, Xiao W (2018) Investigation of porosity and mechanical properties of graphene nanoplatelets-reinforced AlSi10 Mg by selective laser melting. J Micro Nano-Manuf 6:10902. https://doi.org/10.1115/1.4038454 CrossRef

30.

Slocombe A, Li L (2001) Selective laser sintering of TiC-Al₂O₃ composite with self-propagating high-temperature synthesis. J Mater Process Technol 118:173–178. https://doi.org/10.1016/S0924-0136(01)00905-0 CrossRef

31.

Ghosh SK, Saha P (2011) Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process. Mater Des 32:139–145. https://doi.org/10.1016/j.matdes.2010.06.020 CrossRef

32.

Uhlmann E, Piltz S, Schauer K (2005) Micro milling of sintered tungsten–copper composite materials. J Mater Process Technol 167:402–407. https://doi.org/10.1016/j.jmatprotec.2005.05.022 CrossRef

33.

Pintsuk G, Brünings SE, Döring JE et al (2003) Development of W/Cu-functionally graded materials. Fusion Eng Des 66:237–240. https://doi.org/10.1016/S0920-3796(03)00220-5 CrossRef

34.

Gu D, Shen Y (2006) WC-Co particulate reinforcing Cu matrix composites produced by direct laser sintering. Mater Lett 60:3664–3668. https://doi.org/10.1016/j.matlet.2006.03.103 CrossRef

35.

Gu DD, Shen YF, Dai P, Yang MC (2006) Microstructure and property of sub-micro WC-10%Co particulate reinforced Cu matrix composites prepared by selective laser sintering. Trans Nonferrous Met Soc China 16:357–362. https://doi.org/10.1016/S1003-6326(06)60061-7 CrossRef

36.

Gu D, Shen Y (2009) Microstructures and properties of direct laser sintered tungsten carbide (WC) particle reinforced Cu matrix composites with RE–Si–Fe addition: a comparative study. J Mater Res 24:3397–3406. https://doi.org/10.1557/jmr.2009.0419 CrossRef

37.

Gu D, Shen Y, Zhao L et al (2007) Effect of rare earth oxide addition on microstructures of ultra-fine WC-Co particulate reinforced Cu matrix composites prepared by direct laser sintering. Mater Sci Eng, A 445:316–322. https://doi.org/10.1016/j.msea.2006.09.057 CrossRef

38.

Agarwala MK, Bourell DL, Wu B, Beaman JJ (1993) An evaluation of the mechanical behavior of bronze-Ni composites produced by selective laser sintering. In: Solid freeform fabrication symposium, Austin, Texas, USA

39.

Gu D, Shen Y, Lu Z (2009) Microstructural characteristics and formation mechanism of direct laser-sintered Cu-based alloys reinforced with Ni particles. Mater Des 30:2099–2107. https://doi.org/10.1016/j.matdes.2008.08.036 CrossRef

40.

Dürr H, Pilz R, Eleser NS (1999) Rapid tooling of EDM electrodes by means of selective laser sintering. Comput Ind 39:35–45. https://doi.org/10.1016/S0166-3615(98)00123-7 CrossRef

41.

Lu L, Fuh JYH, Chen ZD et al (2000) In situ formation of TiC composite using selective laser melting. Mater Res Bull 35:1555–1561. https://doi.org/10.1016/S0025-5408(00)00339-1 CrossRef

42.

Leong CC, Lu L, Fuh JYH, Wong YS (2002) In-situ formation of copper matrix composites by laser sintering. Mater Sci Eng, A 338:81–88. https://doi.org/10.1016/S0921-5093(02)00050-3 CrossRef

43.

Hu Z, Chen F, Lin D et al (2017) Laser additive manufacturing bulk graphene–copper nanocomposites. Nanotechnology 28:445705. https://doi.org/10.1088/1361-6528/aa8946 CrossRef

44.

Spierings AB, Leinenbach C, Kenel C, Wegener K (2014) Processing of metal-diamond-composites using selective laser melting. In: Solid freeform fabrication proceedings, Austin, Texas, USA, pp 764–774

45.

Liu JH, Shi YS, Chen KH, Huang SH (2007) Research on manufacturing Cu matrix Fe–Cu–Ni–C alloy composite parts by indirect selective laser sintering. Int J Adv Manuf Technol 33:693–697. https://doi.org/10.1007/s00170-006-0493-7 CrossRef

46.

Dück J, Niebling F, Neeße T, Otto A (2004) Infiltration as post-processing of laser sintered metal parts. Powder Technol 145:62–68. https://doi.org/10.1016/j.powtec.2004.05.006 CrossRef

47.

Khaing MW, Fuh JYH, Lu L (2001) Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts. J Mater Process Technol 113:269–272. https://doi.org/10.1016/S0924-0136(01)00584-2 CrossRef

48.

Zhu HH, Lu L, Fuh JYH (2003) Development and characterisation of direct laser sintering Cu-based metal powder. J Mater Process Technol 140:314–317. https://doi.org/10.1016/S0924-0136(03)00755-6 CrossRef

49.

Song B, Dong S, Liao H, Coddet C (2013) Characterisations of TiC particle reinforced FeAl composite part fabricated by selective laser melting. Mater Res Innov 18:50–56. https://doi.org/10.1179/1433075x13y.0000000127 CrossRef

50.

Emamian A, Alimardani M, Khajepour A (2012) Correlation between temperature distribution and in situ formed microstructure of Fe-TiC deposited on carbon steel using laser cladding. Appl Surf Sci 258:9025–9031. https://doi.org/10.1016/j.apsusc.2012.05.143 CrossRef

51.

Emamian A, Alimardani M, Khajepour A (2015) Effect of cooling rate and laser process parameters on additive manufactured Fe-Ti-C metal matrix composites microstructure and carbide morphology. J Manuf Process 16:511–517. https://doi.org/10.1016/j.jmapro.2014.07.002 CrossRef

52.

Biedunkiewicz A, Biedunkiewicz W, Grzesiak D, Figiel P (2012) Mechanical properties of NC-TiB2/steel and NC-TiC/steel composite synthesized by selective laser melting. In: ECCM 15th European conference on composite material, Venice, Italy, pp 24–28

53.

Gåård A, Krakhmalev P, Bergström J (2006) Microstructural characterization and wear behavior of (Fe, Ni)-TiC MMC prepared by DMLS. J Alloys Compd 421:166–171. https://doi.org/10.1016/j.jallcom.2005.09.084 CrossRef

54.

Amano RS, Marek S, Schultz BF, Rohatgi PK (2014) Laser engineered net shaping process for 316 l/15% nickel coated titanium carbide metal matrix composite. J Manuf Sci Eng 136:051007. https://doi.org/10.1115/1.4027758 CrossRef

55.

Alimardani M, Emamian A, Khajepour A, Corbin SF (2010) The effect of thermal field on the deposition of Fe-TiC on carbon steel using laser cladding. In: ASME 2010 international mechanical engineering congress and exposition, Vancouver, British Columbia, Canada, pp 11–18

56.

Ramesh CS, Srinivas CK, Channabasappa BH (2009) Abrasive wear behaviour of laser sintered iron-SiC composites. Wear 267:1777–1783. https://doi.org/10.1016/j.wear.2008.12.026 CrossRef

57.

Ramesh CS, Srinivas CK (2009) Friction and wear behavior of laser-sintered iron-silicon carbide composites. J Mater Process Technol 209:5429–5436. https://doi.org/10.1016/j.jmatprotec.2009.04.018 CrossRef

58.

Lin D, Ye C, Liao Y et al (2013) Mechanism of fatigue performance enhancement in a laser sintered superhard nanoparticles reinforced nanocomposite followed by laser shock peening. J Appl Phys 113:133509. https://doi.org/10.1063/1.4799154 CrossRef

59.

Kang N, Ma W, Li F et al (2018) Microstructure and wear properties of selective laser melted WC reinforced 18Ni-300 steel matrix composite. Vacuum 154:69–74. https://doi.org/10.1016/j.vacuum.2018.04.044 CrossRef

60.

Yan X, Huang C, Chen C et al (2018) Additive manufacturing of WC reinforced maraging steel 300 composites by cold spraying and selective laser melting. Surf Coat Technol 371:161–171. https://doi.org/10.1016/j.surfcoat.2018.03.072 CrossRef

61.

AlMangour B, Grzesiak D, Yang J-M (2016) Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting. J Alloys Compd 680:480–493. https://doi.org/10.1016/j.jallcom.2016.04.156 CrossRef

62.

Zheng Z, Wang L, Jia M et al (2017) Microstructure and mechanical properties of stainless steel/calcium silicate composites manufactured by selective laser melting. Mater Sci Eng, C 71:1099–1105. https://doi.org/10.1016/j.msec.2016.11.032 CrossRef

63.

Dewidar MM, Dalgarno KW, Wright CS (2003) Processing conditions and mechanical properties of high-speed steel parts fabricated using direct selective laser sintering. Proc Inst Mech Eng Part B J Eng Manuf 217:1651–1663. https://doi.org/10.1243/095440503772680587 CrossRef

64.

Kumar S, Kruth JP (2007) Effect of bronze infiltration into laser sintered metallic parts. Mater Des 282:400–407. https://doi.org/10.1016/j.matdes.2005.09.016 CrossRef

65.

Yan C, Shi Y, Yang J, Liu J (2009) Preparation and selective laser sintering of nylon-12 coated metal powders and post processing. J Mater Process Technol 209:5785–5792. https://doi.org/10.1016/j.jmatprotec.2009.06.010 CrossRef

66.

Liu J, Shi Y, Lu Z et al (2006) Rapid manufacturing metal parts by laser sintering admixture of epoxy resin/iron powders. Adv Eng Mater 8:988–994. https://doi.org/10.1002/adem.200600060 CrossRef

67.

Simchi A, Pohl H (2004) Direct laser sintering of iron-graphite powder mixture. Mater Sci Eng, A 383:191–200. https://doi.org/10.1016/j.msea.2004.05.070 CrossRef

68.

Lin D, Richard Liu C, Cheng GJ (2014) Single-layer graphene oxide reinforced metal matrix composites by laser sintering: microstructure and mechanical property enhancement. Acta Mater 80:183–193. https://doi.org/10.1016/j.actamat.2014.07.038 CrossRef

69.

Cooper DE, Blundell N, Maggs S, Gibbons GJ (2013) Additive layer manufacture of Inconel 625 metal matrix composites, reinforcement material evaluation. J Mater Process Technol 213:2191–2200. https://doi.org/10.1016/j.jmatprotec.2013.06.021 CrossRef

70.

Hong C, Gu D, Dai D et al (2015) High-temperature oxidation performance and its mechanism of TiC/Inconel 625 composites prepared by laser metal deposition additive manufacturing. J Laser Appl 27:S17005. https://doi.org/10.2351/1.4898647 CrossRef

71.

Bi G, Sun CN, Nai ML, Wei J (2013) Micro-structure and mechanical properties of nano-TiC reinforced Inconel 625 deposited using LAAM. Phys Procedia 41:828–834. https://doi.org/10.1016/j.phpro.2013.03.155 CrossRef

72.

Hong C, Gu D, Dai D et al (2013) Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures. Opt Laser Technol 54:98–109. https://doi.org/10.1016/j.optlastec.2013.05.011 CrossRef

73.

Gu D, Hong C, Jia Q et al (2013) Combined strengthening of multi-phase and graded interface in laser additive manufactured TiC/Inconel 718 composites. J Phys D Appl Phys 47:45309. https://doi.org/10.1088/0022-3727/47/4/045309 CrossRef

74.

Jia Q, Gu D (2014) Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties. J Alloys Compd 585:713–721. https://doi.org/10.1016/j.jallcom.2013.09.171 CrossRef

75.

Wilson JM, Shin YC (2012) Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC. Surf Coat Technol 207:517–522. https://doi.org/10.1016/j.surfcoat.2012.07.058 CrossRef

76.

Cui C, Guo Z, Wang H, Hu J (2007) In situ TiC particles reinforced grey cast iron composite fabricated by laser cladding of Ni-Ti-C system. J Mater Process Technol 183:380–385. https://doi.org/10.1016/j.jmatprotec.2006.10.031 CrossRef

77.

Zheng B, Topping T, Smugeresky JE et al (2010) The influence of Ni-coated TiC on laser-deposited IN625 metal matrix composites. Metall Mater Trans A Phys Metall Mater Sci 41:568–573. https://doi.org/10.1007/s11661-009-0126-5 CrossRef

78.

Wang Y, Shi J (2020) Effect of post heat treatment on the microstructure and tensile properties of nano TiC particulate reinforced Inconel 718 by selective laser melting. J Manuf Sci Eng. https://doi.org/10.1115/1.4046646 CrossRef

79.

Rong T, Gu D, Shi Q et al (2016) Effects of tailored gradient interface on wear properties of WC/Inconel 718 composites using selective laser melting. Surf Coat Technol 307:418–427. https://doi.org/10.1016/j.surfcoat.2016.09.011 CrossRef

80.

Nguyen QB, Zhu Z, Chua BW et al (2018) Development of WC-Inconel composites using selective laser melting. Arch Civ Mech Eng 18:1410–1420. https://doi.org/10.1016/j.acme.2018.05.001 CrossRef

81.

Zhang B, Bi G, Nai S et al (2016) Microhardness and microstructure evolution of TiB2 reinforced Inconel 625/TiB2 composite produced by selective laser melting. Opt Laser Technol 80:186–195. https://doi.org/10.1016/j.optlastec.2016.01.010 CrossRef

82.

Wang Y, Shi J, Lu S, Wang Y (2017) Selective laser melting of graphene-reinforced Inconel 718 superalloy: evaluation of microstructure and tensile performance. J Manuf Sci Eng. https://doi.org/10.1115/1.4034712 CrossRef

83.

Xiao W, Lu S, Wang Y, Jing SHI (2018) Mechanical and tribological behaviors of graphene/Inconel 718 composites. Trans Nonferrous Met Soc China 28:1958–1969. https://doi.org/10.1016/S1003-6326(18)64841-1 CrossRef

84.

Wang Y, Shi J (2020) Microstructure and tensile performance of graphene-reinforced Inconel 718 alloy via selective laser melting and post-treatments. J Micro Nano-Manuf. https://doi.org/10.1115/1.4045765 CrossRef

85.

Attar H, Ehtemam-Haghighi S, Kent D, Dargusch MS (2018) Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review. Int J Mach Tools Manuf 133:85–102. https://doi.org/10.1016/j.ijmachtools.2018.06.003 CrossRef

86.

Gu D, Wang Z, Shen Y et al (2009) In-situ TiC particle reinforced Ti-Al matrix composites: powder preparation by mechanical alloying and selective laser melting behavior. Appl Surf Sci 255:9230–9240. https://doi.org/10.1016/j.apsusc.2009.07.008 CrossRef

87.

Zhang Y, Sun J, Vilar R (2011) Characterization of (TiB + TiC)/TC4 in situ titanium matrix composites prepared by laser direct deposition. J Mater Process Technol. https://doi.org/10.1016/j.jmatprotec.2010.11.009 CrossRef

88.

Gu D, Hagedorn YC, Meiners W et al (2011) Selective laser melting of in situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance. Surf Coat Technol 205:3285–3292. https://doi.org/10.1016/j.surfcoat.2010.11.051 CrossRef

89.

Zheng B, Smugeresky JE, Zhou Y et al (2008) Microstructure and properties of laser-deposited Ti6Al4 V metal matrix composites using Ni-Coated powder. Metall Mater Trans A Phys Metall Mater Sci 39:1196–1205. https://doi.org/10.1007/s11661-008-9498-1 CrossRef

90.

Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2013) Scanning velocity influence on microstructure, microhardness and wear resistance performance of laser deposited Ti6Al4 V/TiC composite. Mater Des 50:656–666. https://doi.org/10.1016/j.matdes.2013.03.049 CrossRef

91.

Gu D, Hagedorn YC, Meiners W et al (2011) Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by selective laser melting (SLM): densification, growth mechanism and wear behavior. Compos Sci Technol 71:1612–1620. https://doi.org/10.1016/j.compscitech.2011.07.010 CrossRef

92.

Ochonogor OF, Meacock C, Abdulwahab M et al (2012) Effects of Ti and TiC ceramic powder on laser-cladded Ti-6Al-4V in situ intermetallic composite. Appl Surf Sci 263:591–596. https://doi.org/10.1016/j.apsusc.2012.09.114 CrossRef

93.

Gu D, Meng G, Li C et al (2012) Selective laser melting of TiC/Ti bulk nanocomposites: influence of nanoscale reinforcement. Scr Mater 67:185–188. https://doi.org/10.1016/j.scriptamat.2012.04.013 CrossRef

94.

Liu D, Zhang SQ, Li A, Wang HM (2010) Creep rupture behaviors of a laser melting deposited TiC/TA15 in situ titanium matrix composite. Mater Des 31:3127–3133. https://doi.org/10.1016/j.matdes.2009.12.036 CrossRef

95.

Zhang Y, Wei Z, Shi L, Xi M (2008) Characterization of laser powder deposited Ti-TiC composites and functional gradient materials. J Mater Process Technol 206:438–444. https://doi.org/10.1016/j.jmatprotec.2007.12.055 CrossRef

96.

Obielodan J, Stucker B (2013) Characterization of LENS-fabricated Ti6Al4V and Ti6Al4V/TiC dual-material transition joints. Int J Adv Manuf Technol 66:2053–2061. https://doi.org/10.1007/s00170-012-4481-9 CrossRef

97.

Shishkovsky I, Kakovkina N, Sherbakov V (2017) Graded layered titanium composite structures with TiB2 inclusions fabricated by selective laser melting. Compos Struct 169:90–96. https://doi.org/10.1016/j.compstruct.2016.11.013 CrossRef

98.

Attar H, Bönisch M, Calin M et al (2014) Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies. J Mater Res 29:1941–1950. https://doi.org/10.1557/jmr.2014.122 CrossRef

99.

Attar H, Bönisch M, Calin M et al (2014) Selective laser melting of in situ titanium-titanium boride composites: processing, microstructure and mechanical properties. Acta Mater 76:13–22. https://doi.org/10.1016/j.actamat.2014.05.022 CrossRef

100.

Farayibi PK, Murray JW, Huang L et al (2014) Erosion resistance of laser clad Ti-6Al-4V/WC composite for waterjet tooling. J Mater Process Technol 214:710–721. https://doi.org/10.1016/j.jmatprotec.2013.08.014 CrossRef

101.

Sun CN, Baldridge T, Gupta MC (2009) Fabrication of ZrB2-Zr cermet using laser sintering technique. Mater Lett 63:2529–2531. https://doi.org/10.1016/j.matlet.2009.08.059 CrossRef

102.

Ochonogor OF, Meacock C, Pityana SL et al (2012) Microstructure characterization of laser-deposited titanium carbide and zirconium-based titanium metal matrix composites. J S Afr Inst Min Metall 112:905–910

103.

Liu DM, Si TZ, Wang CC, Zhang QA (2007) Phase component, microstructure and hydrogen storage properties of the laser sintered Mg-20 wt% LaNi5 composite. Scr Mater 57:389–392. https://doi.org/10.1016/j.scriptamat.2007.05.011 CrossRef

104.

Si TZ, Zhang QA (2006) Phase structures and electrochemical properties of the laser sintered LaNi5-x wt% Mg2Ni composites. J Alloys Compd 414:317–321. https://doi.org/10.1016/j.jallcom.2005.07.040 CrossRef

105.

Li C, Liu ZY, Fang XY, Guo YB (2018) Residual stress in metal additive manufacturing. Procedia CIRP 71:348–353. https://doi.org/10.1016/j.procir.2018.05.039 CrossRef

106.

Megahed M, Mindt H-W, N’Dri N et al (2016) Metal additive-manufacturing process and residual stress modeling. Integr Mater Manuf Innov 5:61–93. https://doi.org/10.1186/s40192-016-0047-2 CrossRef

107.

Denlinger ER, Heigel JC, Michaleris P, Palmer TA (2015) Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys. J Mater Process Technol 215:123–131. https://doi.org/10.1016/j.jmatprotec.2014.07.030 CrossRef

108.

Han Q, Setchi R, Karihaloo B (2016) Challenges and Opportunities in the additive layer manufacturing of Al-Al₂O₃ nanocomposites. Impact J Innov Impact 8:389

109.

Tapia G, Elwany AH, Sang H (2016) Prediction of porosity in metal-based additive manufacturing using spatial Gaussian process models. Addit Manuf 12:282–290. https://doi.org/10.1016/j.addma.2016.05.009 CrossRef

110.

Tammas-Williams S, Withers PJ, Todd I, Prangnell PB (2016) The effectiveness of hot isostatic pressing for closing porosity in titanium parts manufactured by selective electron beam melting. Metall Mater Trans A Phys Metall Mater Sci 47:1939–1946. https://doi.org/10.1007/s11661-016-3429-3 CrossRef

111.

Simchi A (2006) Direct laser sintering of metal powders: mechanism, kinetics and microstructural features. Mater Sci Eng, A 428:148–158. https://doi.org/10.1016/j.msea.2006.04.117 CrossRef

112.

Kobryn PA, Moore EH, Semiatin SL (2000) Effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V. Scr Mater 4:299–305. https://doi.org/10.1016/S1359-6462(00)00408-5 CrossRef

113.

Rahimian M, Ehsani N, Parvin N, Baharvandi H, Reza H (2009) The effect of particle size, sintering temperature and sintering time on the properties of Al-Al2O3 composites, made by powder metallurgy. J Mater Process Technol 209:5387–5393. https://doi.org/10.1016/j.jmatprotec.2009.04.007 CrossRef

114.

Flom Y, Arsenault RJ (1989) Effect of particle size on fracture toughness of SiC/Al composite material. Acta Metall 37:2413–2423. https://doi.org/10.1016/0001-6160(89)90039-4 CrossRef

115.

Uddin SM, Mahmud T, Wolf C et al (2010) Effect of size and shape of metal particles to improve hardness and electrical properties of carbon nanotube reinforced copper and copper alloy composites. Compos Sci Technol 70:2253–2257. https://doi.org/10.1016/j.compscitech.2010.07.012 CrossRef

116.

Wang Y, Shi J (2019) Engulfment and distribution of second-phase nanoparticle during dendrite solidification of an Al–Si binary alloy: a simulation study. Appl Phys A 125:449. https://doi.org/10.1007/s00339-019-2738-y CrossRef

Title: Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review
Authors: Jing Shi
Yachao Wang
Publication date: 07-05-2020
Publisher: Springer US
Published in: Journal of Materials Science / Issue 23/2020
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-020-04730-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 23/2020

Enhancing the stability and water resistance of CsPbBr3 perovskite nanocrystals by using tetrafluoride and zinc oxide as protective capsules

Dual-emission fluorescent probe templated by spherical polyelectrolyte brush for ratiometric detection of copper ions

Fabrication of all-solid-state textile supercapacitors based on industrial-grade multi-walled carbon nanotubes for enhanced energy storage

A step forward from high-entropy ceramics to compositionally complex ceramics: a new perspective

Energy band gap tuning in Te-doped WS2/WSe2 heterostructures

Solution-processable cyclometalated gold(III) complexes for high-brightness phosphorescent white organic light-emitting devices

Premium Partners