Top

Journal of Coatings Technology and Research

Published in:

01-03-2010

Dry abrasion property of TiN-matrix coating deposited by reactive High Velocity Oxygen Fuel (HVOF) spraying

Authors: Zhengping Mao, Jing Ma, Jun Wang, Baode Sun

Published in: Journal of Coatings Technology and Research | Issue 2/2010

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A TiN-matrix coating with a thickness of about 400 μm was prepared by reactive high velocity oxygen fuel (HVOF) spraying on carbon steel in air. The phase composition, microhardness, and antiabrasion properties of the coating were investigated using x-ray diffraction (XRD), an energy dispersive spectrometer (EDS), a scanning electron microscope (SEM), a Vickers microhardness tester, and block-on-ring abrasive equipment. The abrasion mechanism of TiN-matrix coating under dry abrasion conditions was also discussed. The results indicate that the composition of the coating is main phases of TiN and TiN_0.3, minor phases of Ti₂O₃, and TiO₂. The TiN-matrix coating possesses high microhardness and relatively good toughness. Furthermore, the friction coefficient of the coating decreases with the increment of applied load. The interstratified distribution of titanium oxides can act as a solid lubricant during the wear test. The main abrasion mechanism of the TiN-matrix coating is adhesion wear. In addition, the coating with self-lubricating property can improve the antiwear property of the substrate significantly.

previous article The utilization of specific interactions to enhance the mechanical properties of polysiloxane coatings

next article CO2-laser treatment of indium tin oxide nanoparticle coatings on flexible polyethyleneterephthalate substrates

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Wirojanupatump, S, Shipway, PH, “A Direct Comparison of Wet and Dry Abrasion Behaviour of Mild Steel.” Wear, 233–235 655–665 (1999)

Zenghu Han, Jiawan Tian, Jijun Lao, Geyang Li,Jiawei Dai (2004) “Effects of thickness and substrate on the mechanical properties of hard coatings.” JCT RES 1(4):337–341.

Daniel Höche, Hendrik Schikora, Hayo Zutz, Andreas Emmel, Robert Queitsch, Peter Schaaf (2008) “TiN-coating formation by pulsed Nd:YAG laser irradiation of titanium in nitrogen.” JCT RES 5 (4):505–512. doi:10.1007/s11998-008-9093-9 CrossRef

Pei-Qiang Wu, H. Mohrbacher, J. -P. Celis (1996) “The fretting behavior of PVD TiN coatings in aqueous solution.” Wear 201(1–2):130–137.

M. Stoiber, M. Panzenbőck, C. Mitterer, C. Lugmair (2001) Fatigue properties of Ti-based hard coatings deposited onto tool steels. Surf Coat Technol 142–144: 117–124 doi:10.1016/S0257-8972(01)01220-8.CrossRef

P. Motte, M. Proust, J. Torres, Y. Gobil, Y. Morand, J. Palleau, R. Pantel (2000) “TiN-CVD process optimization for integration with Cu-CVD.” Microelectron. Eng. 50(1–4): 369–374. doi:10.1016/S0167-9317(99)00304-4.CrossRef

W.-Y. Li, G. Zhang, H.L. Liao, C. Coddet (2008) “Characterizations of cold sprayed TiN particle reinforced Al2319 composite coating.” J. Mater. Process. Technol. 202:508–513. doi:10.1016/j.jmatprotec.2007.09.045.CrossRef

Hyung-Jun Kim, Chang-Hee Lee, Soon-Young Hwang (2005) “Superhard nano WC–12%Co coating by cold spray deposition.” Mater. Sci. Eng. A 391:(1–2) 243–248. doi:10.1016/j.msea.2004.08.082.

A. Anal, T.K. Bandyopadhyay, K. Das (2006) “Synthesis and characterization of TiB₂-Reinforced iron-Based composites.” J. Mater. Process. Technol. 172(1):70–76. doi:10.1016/j.jmatprotec.2005.09.011.CrossRef

10.

I. Ozdemir, I. Hamanaka, M. Hirose, Y. Tsunekawa,T, M. Okumiya (2005) “In situ formation of Al-Si-Mg based composite coating by different reactive thermal spray processes.” Surf. Coat. Technol. 200(1–4): 1155–1161.doi:10.1016/j.surfcoat.2005.01.117.CrossRef

11.

Akira Kobayashi (2000) “Formation of TiN coatings by gas tunnel type plasma reactive spraying.” Surf. Coat. Technol. 132(2–3): 152–157. doi:10.1016/S0257-8972(00)00725-8.CrossRef

12.

Wenran Feng, Dianran Yan, Jining He, et al. (2005) “Microhardness and toughness of the TiN coating prepared by reactive plasma spraying.” Appl. Surf. Sci. 243(1–4) 204–213. doi:10.1016/j.apsusc.2004.09.064.CrossRefADS

13.

Lisong Xiao, Dianran Yan, Jining He et al., “Nanostructured TiN coating prepared by reactive plasma spraying in atmosphere.” Appl. Surf. Sci. 253 (18) 7535–7539(2007) doi:10.1016/j.apsusc.2007.03.062.CrossRefADS

14.

G.M. Ingo, S. Kaciulis, A. Mezzi, T. Valente, F. Casadei, G. Gusmano, “Characterization of composite titanium nitride coatings prepared by reactive plasma spraying.” Electrochim. Acta 50 4531–4537 (2005) doi:10.1016/j.electacta.2004.10.089.CrossRef

15.

Wenran Feng, Dianran Yan, Jining He, Xiangzhi Li, Yanchun Dong, “Reactive plasma sprayed TiN coating and its tribological properties.” Wear 258 806–811 (2005) doi:10.1016/j.wear.2004.09.057.CrossRef

16.

Mao, Z, Ma, J, Wang, J, Sun, B, “Properties of TiN-Matrix Coating Deposited by Reactive HVOF Spraying.” J. Coat. Technol. Res. doi:10.1007/s11998-008-9105-9

17.

Lei, L, Weiwei, L, Yiping, T, Bin, S, Wenbin, H, “Friction and Wear Properties of Short Carbon Fiber Reinforced Aluminum Matrix Composites.” Wear (2008). doi:10.1016/j.wear.2008.08.009

18.

Taro Sumitomo, Tatsuhiko Aizawa, Shigeo Yamamoto, “In-situ formation of self-lubricating tribo-Films for dry machinability.” Surf. Coat. Technol. 200 1797–1803 (2005) doi:10.1016/j.surfcoat.2005.08.055.CrossRef

19.

J. Liu (1993) “Material Wear Principle and Wear Resistance.” Tsing University Press, Bejing.

Title: Dry abrasion property of TiN-matrix coating deposited by reactive High Velocity Oxygen Fuel (HVOF) spraying
Authors: Zhengping Mao
Jing Ma
Jun Wang
Baode Sun
Publication date: 01-03-2010
Publisher: Springer US
Published in: Journal of Coatings Technology and Research / Issue 2/2010
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI: https://doi.org/10.1007/s11998-009-9180-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2010

UV curable, liquid diacrylate monomers based on (cis,trans)-1,3/1,4-cyclohexanedimethanol

Evaluating water transport through high solid polyurethane coating using the EIS method

The influence of nanoadditives on surface, permeability and mechanical properties of self-organized organic–inorganic nanocomposite coatings

Preparation of titanium dioxide compound pigments based on kaolin substrates

The effect of weathering and thermal treatment on the scratch recovery characteristics of clearcoats

CO2-laser treatment of indium tin oxide nanoparticle coatings on flexible polyethyleneterephthalate substrates

Premium Partners