Top

Journal of Materials Engineering and Performance

Published in:

21-03-2018

Ductile Tearing Resistance Indexing of Automotive Grade DP 590 Steel Sheets: EWF Testing Using DENT Specimens

Authors: Subhadra Sahoo, N. Padmapriya, Partha Sarathi De, P. C. Chakraborti, S. K. Ray

Published in: Journal of Materials Engineering and Performance | Issue 4/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The essential work of fracture (EWF) method has been explored for indexing the ductile tearing resistance of DP 590 automotive grade dual-phase steel sheet both in longitudinal (L-T) and transverse (T-L) orientations. The simplest possible test and analysis procedures have been adopted. The EWF method is found to be eminently suitable for routine quality control and product development purposes for such materials. Areas for further research for improving the experimental strategy are highlighted. For the investigated steel sheet, the estimated tearing resistance is found to be distinctly higher for the L-T orientation compared to the T-L orientation; the reason thereof merits further investigation.

previous article Wear Behavior of AZ31/Al2O3 Magnesium Matrix Surface Nanocomposite Fabricated via Friction Stir Processing

next article Assessing Constitutive Models for Prediction of High-Temperature Flow Behavior with a Perspective of Alloy Development

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

B. Cotterell and J.K. Reddel, The Essential Work of Plane Stress Ductile Fracture, Int. J. Fract., 1977, 13(3), p 267–277

Y.W. Mai and B. Cotterell, On the Essential Work of Ductile Fracture in Polymers, Int. J. Fract., 1986, 32, p 102–105CrossRef

Y. Marchal and F. Delanny, Influence of Test Parameters on the Measurement of the Essential Work of Fracture of Zinc Sheets, Int. J. Fract., 1996, 80, p 295–310CrossRef

Y. Marchal, J.-F. Walhin, and F. Delannay, Statistical Procedure for Improving the Precision of the Measurement of the Essential Work of Fracture of Thin Sheets, Int. J. Fract., 1998, 87, p 189–199CrossRef

T. Pardoen, Y. Marchal, and F. Dellanay, Essential Work of Fracture Compared to Fracture Mechanics—Towards a Thickness Independent Plane Stress Toughness, Eng. Fract. Mech., 2002, 69, p 617–631CrossRef

B. Cotterell, T. Pardoen, and A.G. Atkin, Measuring Toughness and the Cohesive Stress–Displacement Relationship by the Essential Work of Fracture Concept, Eng. Fract. Mech., 2005, 72, p 827–848CrossRef

J.G. Williams and M. Rink, The Standardisation of the EWF Test, Eng. Fract. Mech., 2007, 74, p 1009–1017CrossRef

T. Báránya, T. Czigánya, and J. Karger-Kocsis, Application of the Essential Work of Fracture (EWF) Concept for Polymers, Related Blends and Composites: A Review, Prog. Polym. Sci., 2010, 35, p 1257–1287CrossRef

M. Rink, L. Andena, and C. Marano, The Essential Work of Fracture in Relation to J-Integral, Eng. Fract. Mech., 2014, 127, p 181–193CrossRef

10.

F. Tuba, L. Oláh, and P. Nagy, The Role of Ultimate Elongation in the Determination of Valid Ligament Range of Essential Work of Fracture Tests, J. Mater. Sci., 2012, 47, p 2228–2233CrossRef

11.

F. Hachez, A.G. Atkins, R.H. Dodds, and T. Pardoen, Micromechanics-Based Modelling of Ductile Tearing in Thin Plates, ECF15, 2004. www.structuralintegrity.eu/pdf/esis/Documents/…/15/Hachez%20F%20et%20al.pdf.

12.

G. Lacroix, T. Pardoen, and P.J. Jacques, The Fracture Toughness of TRIP Assisted Multiphase Steels, Actamaterialia, 2008, 56, p 3900–3913

13.

D. Gutiérrez, L.I. Pérez, A. Lara, D. Casellas, and J.M. Prado, Evaluation of Essential Work of Fracture in a Dual Phase High Strength Steel Sheet, Revista de Metalurgia, 2013, 49(1), p 45–54. https://doi.org/10.3989/revmetalm.1213 CrossRef

14.

M. Torrentallé Dot, High Strength Steel Fracture: Fracture Initiation Analysis by the Essential Work of Fracture Concept, Bachelor Thesis, UniversitatPolytèchnica de Catalunya, Manresa, Jan 2015

15.

G. Martin, M. Veron, Y. Brechet, B. Chehab, R. Fourmentin, J.-D. Mithieux, S.K. Yerra, L. Delannay, and T. Pardoen, Characterization of the Hot Cracking Resistance Using the Essential Work of Fracture (EWF)—Application to Duplex Stainless Steels, REM R. Esc. Minas, OuroPreto, 2013, 66(2), p 145–151. www.scielo.br/pdf/rem/v66n2/v66n2a02.pdf

16.

ASTM E2472, Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions, ASTM International, West Conshohocken, PA, 2012

17.

C.D. Wilson and Prabhu Mani, Plastic J-Integral Calculations Using the Load Separation Method for the Double Edge Notch Tension Specimen, Eng. Fract. Mech., 2008, 75, p 5177–5186CrossRef

18.

F. Tuba, L. Oláh, and P. Nagy, On the Valid Ligament Range of Specimens for the Essential Work of Fracture Method: The Inconsequence of Stress Criteria, Eng. Fract. Mech., 2013, 99, p 349–355CrossRef

19.

H. Tao, P.D. Zavattieri, L.G. Hector, Jr., and W. Tong, Mode I, Fracture at Spot Welds in Dual-Phase Steel: An Application of Reverse Digital Image Correlation, Exp. Mech., 2010, 50, p 1199–1212CrossRef

20.

M. Faccoli, G. Cornacchia, M. Gelfi, A. Panvini, and R. Roberti, Notch Ductility of Steels for Automotive Components, Eng. Fract. Mech., 2014, 127, p 181–193CrossRef

21.

C.F. Shih, Relationship Between the J-Integral and the Crack Opening Displacement for Stationary and Extending Cracks, J. Mech. Phys. Solids, 1981, 29, p 305–326CrossRef

22.

T.L. Anderson, Fracture Mechanics: Fundamentals and Applications, CRC Press LLC, Boca Raton, 1995

23.

H. Li, M.W. Fu, J. Lua, and H. Yang, Ductile Fracture: Experiments and Computations, Int. J. Plast., 2011, 27, p 147–180CrossRef

24.

C.E. Turner, A Re-assessment of Ductile Tearing Resistance (Part I and II), Fracture Behaviour and Design of Materials and Structures, Proc. ECF 8, D. Firrao, Ed., Vol. II, 1990, p 933–949, 951–968

25.

P. Anuschewski, W. Brocks, D. Hellmann, Characterisation of Ductile Tearing Resistance by the Energy Dissipation Rate: Effects of Material, Specimen Shape and Size, GKSS Report 2002/xx

Title: Ductile Tearing Resistance Indexing of Automotive Grade DP 590 Steel Sheets: EWF Testing Using DENT Specimens
Authors: Subhadra Sahoo
N. Padmapriya
Partha Sarathi De
P. C. Chakraborti
S. K. Ray
Publication date: 21-03-2018
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 4/2018
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3293-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2018

The Precipitation Behavior and Hot Deformation Characteristics of Electron Beam Smelted Inconel 740 Superalloy

Tribological Performance of Duplex-Annealed Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy at Elevated Temperatures Under Dry Sliding Condition

Investigation of Mild Steel Thin-Wall Tubes in Unfilled and Foam-Filled Triangle, Square, and Hexagonal Cross Sections Under Compression Load

Effect of Width of Kerf on Machining Accuracy and Subsurface Layer After WEDM

Investigation on Tribological Properties of the Pre-oxidized Ti2AlN/TiAl Composite

A Comparative Study of Fracture Toughness at Cryogenic Temperature of Austenitic Stainless Steel Welds

Premium Partners