Top

Journal of Materials Engineering and Performance

Published in:

23-09-2021

Effect of Aluminum Content on the Tribological Properties of AlxCrTiMo Refractory High-Entropy Alloys

Authors: Ruiyang Zhang, Kelimu Tulugan, Aijun Zhang, Junhu Meng, Jiesheng Han

Published in: Journal of Materials Engineering and Performance | Issue 2/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Refractory high-entropy alloys are a new type of alloy exhibiting good properties at high temperatures. In this study, Al_xCrTiMo refractory high-entropy alloys were prepared by spark plasma sintering, and the mechanical and tribological properties of the alloys were investigated. The three-dimensional morphology and SEM image of the worn surface showed variation of wear marks, wherein the wear rate of the alloy decreased with increasing temperature, and the main wear mechanism changed from abrasive to adhesive wear. The results of Raman and x-ray diffraction spectroscopies of the phase structure of the oxidized glazed layer on the wear marks showed that the oxide layer on the surface of the Al_0.25CrTiMo wear mark at 800°C contained oxides of MoO₃ and MoO₂. It can be concluded from these results that reduction of the aluminum content of the alloy will promote the formation of Cr and Mo oxides, which is important in the development of high-temperature wear resistance of Al_xCrTiMo alloys.

previous article Effect of Temperature on the Electrochemical Corrosion Behavior of X80 Steel in Silty Soil Containing Sodium Chloride

next article Reducing Anisotropy in High Yttria Ferritic Oxide Dispersion Strengthened Steels by Powder Forging

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau and S.-Y. Chang, Nanostructured High-Entropy Alloys with Multi-Principal Elements: Novel Alloy Design Concepts and Outcomes, Adv. Eng. Mater., 2004, 6(299), p 303. https://doi.org/10.1002/adem.200300567CrossRef

J.M. Torralba, P. Alvaredo and A. García-Junceda, High-Entropy Alloys Fabricated via Powder Metallurgy. A Critical Review, Powder Metall., 2019, 62, p 84–114. https://doi.org/10.1080/00325899.2019.1584454CrossRef

Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw and Lu. Zhao Ping, Microstructures and Properties of Highentropy Alloys, Prog. Mater. Sci., 2014, 61, p 1–93. https://doi.org/10.1016/j.pmatsci.2013.10.001CrossRef

O.N. Senkov, D.B. Miracle, K.J. Chaput and J.-P. Couzinie, Development and Exploration of Refractory High Entropy Alloys—A Review, J. Mater. Res., 2018, 19, p 3092–3128. https://doi.org/10.1557/jmr.2018.153CrossRef

O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang and P.K. Liaw, Refractory High-Entropy Alloys, Intermetallics, 2010, 18, p 1758–1765. https://doi.org/10.1016/j.intermet.2010.05.014CrossRef

O.N. Senkov, G.B. Wilks, J.M. Scott and D.B. Miracle, Mechanical Properties of Nb₂₅Mo₂₅Ta₂₅W₂₅ and V₂₀Nb₂₀Mo₂₀Ta₂₀W₂₀ Refractory High Entropy Alloys, Intermetallics, 2011, 19, p 698–706. https://doi.org/10.1016/j.intermet.2011.01.004CrossRef

B. Gorr, F. Müller, M. Azim, H.-J. Christ, T. Müller, H. Chen, A. Kauffmann and M. Heilmaier, High-Temperature Oxidation Behavior of Refractory High-Entropy Alloys: Effect of Alloy Composition, Oxid. Met., 2017, 88, p 339–349. https://doi.org/10.1007/s11085-016-9696-yCrossRef

F. Müller, B. Gorr, H.-J. Christ, J. Müller, B. Butz, H. Chen, A. Kauffmann and M. Heilmaier, On the Oxidation Mechanism of Refractory High Entropy Alloys, Corros. Sci., 2019, 159, p 108161. https://doi.org/10.1016/j.corsci.2019.108161CrossRef

B. Gorr, F. Müller, S. Schellert, H.-J. Christ, H. Chen, A. Kauffmann and M. Heilmaier, A New Strategy to Intrinsically Protect Refractory Metal Based Alloys at Ultra High Temperatures, Corros. Sci., 2020, 166, p 108475. https://doi.org/10.1016/j.corsci.2020.108475CrossRef

10.

A. Poulia, E. Georgatis, A. Lekatou and A.E. Karantzalis, Microstructure and Wear Behavior of a Refractory High Entropy Alloy, Int. J. Refract. Met. Hard Mater., 2016, 57, p 50–63. https://doi.org/10.1016/j.ijrmhm.2016.02.006CrossRef

11.

C. Mathiou, A. Poulia, E. Georgatis and A.E. Karantzalis, Microstructural Features and Dry-Sliding Wear Response of MoTaNbZrTi High Entropy Alloy, Mater. Chem. Phys., 2018, 210, p 126–135. https://doi.org/10.1016/j.matchemphys.2017.08.036CrossRef

12.

W. Steurer, Single-Phase High-Entropy Alloys – A Critical Update, Mater. Charact., 2020, 162, p 110179. https://doi.org/10.1016/j.matchar.2020.110179CrossRef

13.

J. Menghani, A. Vyas, P. Patel, H. Natu and S. More, Wear, Erosion and Corrosion Behavior of Laser Cladded High Entropy Alloy Coatings – A Review, Mater. Today Proc., 2020 https://doi.org/10.1016/j.matpr.2020.08.763CrossRef

14.

D.B. Miracle and O.N. Senkov, A Critical Review of High Entropy Alloys and Related Concepts, Acta Mater., 2017, 122, p 448–511. https://doi.org/10.1016/j.actamat.2016.08.081CrossRef

15.

J. Chen, X. Zhou, W. Wang, B. Liu, Y. Lv, W. Yang, D. Xu and Y. Liu, A Review on Fundamental of High Entropy Alloys with Promising High temperature Properties, J. Alloy. Compd., 2018, 760, p 15–30. https://doi.org/10.1016/j.jallcom.2018.05.067CrossRef

16.

S. Alvi and F. Akhtar, High Temperature Tribology of CuMoTaWV High Entropy Alloy, Wear, 2019, 426, p 412–419. https://doi.org/10.1016/j.wear.2018.12.085CrossRef

17.

Y. Guo, H. Wang and Q. Liu, Microstructure Evolution and Strengthening Mechanism of Laser-Cladding MoFe_xCrTiWAlNb_y Refractory High-Entropy Alloy Coatings, J. Alloy Compd., 2020, 834, 155147. https://doi.org/10.1016/j.jallcom.2020.155147CrossRef

18.

G. Deng, A.K. Tieu, L. Su, P. Wang, L. Wang, X. Lan, S. Cui and H. Zhu, Investigation into Reciprocating Dry Sliding Friction and Wear Properties of bulk CoCrFeNiMo High Entropy Alloys Fabricated by Spark Plasma Sintering and Subsequent Cold Rolling Processes: Role of Mo Element Concentration, Wear, 2020, 460, p 203440. https://doi.org/10.1016/j.wear.2020.203440CrossRef

19.

S. Yadav, K. Biswas and A. Kumar, Spark Plasma Sintering of High Entropy Alloys, Spark Plasma Sinter. Mater., 2019 https://doi.org/10.1007/978-3-030-05327-7_19CrossRef

20.

J. Han, B. Su, J. Lu, J. Meng, A. Zhang and Y. Wu, Preparation of MoNbTaW Refractory High Entropy Alloy Powders by Pressureless Spark Plasma Sintering: Crystal Structure and Phase Evolution, Intermetallics, 2020, 123, 106832. https://doi.org/10.1016/j.intermet.2020.106832CrossRef

21.

C. Zhu, Z. Li, C. Hong, P. Dai and J. Chen, Microstructure and Mechanical Properties of the TiZrNbMoTa Refractory High-Entropy Alloy Produced by Mechanical Alloying and Spark PLASMA sintering, Int. J. Refract Met. Hard Mater., 2020, 93, 105357. https://doi.org/10.1016/j.ijrmhm.2020.105357CrossRef

22.

Z. Guo, A. Zhang, J. Han and J. Meng, Effect of Si Additions on Microstructure and Mechanical Properties of Refractory NbTaWMo High-Entropy Alloys, J. Mater. Sci., 2019, 54, p 5844–5851. https://doi.org/10.1007/s10853-018-03280-zCrossRef

23.

R. Zhang, J. Meng, J. Han, T. Kelimu and R. Zhang, Oxidation Resistance Properties of Refractory High-Entropy Alloys with Varied AlxCrTiMo Content, J. Mater. Sci., 2021, 56, p 3551–3561. https://doi.org/10.1007/s10853-020-05480-yCrossRef

24.

C.-M. Lin, C.-C. Juan, C.-H. Chang, C.-W. Tsai and J.-W. Yeh, Effect of Al Addition on Mechanical Properties and Microstructure of Refractory AlxHfNbTaTiZr Alloys, J. Alloy Compd., 2015, 624, p 100–107. https://doi.org/10.1016/j.jallcom.2014.11.064CrossRef

25.

A.J. Zhang, J.S. Han, J.H. Meng, B. Su and P.D. Li, Rapid Preparation of AlCoCrFeNi High Entropy Alloy by Spark Plasma Sintering from Elemental Powder Mixture, Mater. Lett., 2016, 181, p 82–85. https://doi.org/10.1016/j.matlet.2016.06.014CrossRef

26.

J. Joseph, N. Haghdadi, K. Shamlaye, P. Hodgson, M. Barnett and D. Fabijanic, The Sliding Wear Behaviour of CoCrFeMnNi and AlxCoCrFeNi High Entropy Alloys at Elevated Temperatures, Wear, 2019, 428, p 32–44. https://doi.org/10.1016/j.wear.2019.03.002CrossRef

27.

K. Dohda, C. Boher, F. Rezai-Aria and N. Mahayotsanun, Tribology in Metal Forming at Elevated Temperatures, Friction, 2015, 3, p 1–27. https://doi.org/10.1007/s40544-015-0077-3CrossRef

28.

F.A. Essa, Q.X. Zhang, X.J. Huang, M.K.A. Ali, A. Elagouz and M.A.A. Abdelkareem, Effects of ZnO and MoS₂ Solid Lubricants on Mechanical and Tribological Properties of M50-Steel-Based Composites at High Temperatures: Experimental and Simulation Study, Tribol. Lett., 2017, 65, p 97. https://doi.org/10.1007/s11249-017-0880-2CrossRef

29.

C. Huang, B. Zou, P. Guo, Y. Liu, C. Huang and J. Wang, Sliding Behavior and Wear Mechanism of Iron and Cobalt-Based High-Temperature Alloys Against WC and SiC Balls, Int. J. Refract. Met. Hard Mater., 2016, 59, p 40–55. https://doi.org/10.1016/j.ijrmhm.2016.05.007CrossRef

30.

A. Zhang, J. Han, B. Su, P. Li and J. Meng, Microstructure, Mechanical Properties and Tribological Performance of CoCrFeNi High Entropy Alloy Matrix Self-Lubricating Composite, Mater. Des., 2017, 114, p 253–263. https://doi.org/10.1016/j.matdes.2016.11.072CrossRef

31.

M. Pole, M. Sadeghilaridjani, J. Shittu, A. Ayyagari and S. Mukherjee, High Temperature Wear Behavior of Refractory High Entropy Alloys Based on 4-5-6 Elemental Palette, J. Alloy Compd., 2020, 843, 156004. https://doi.org/10.1016/j.jallcom.2020.156004CrossRef

32.

F. Müller, B. Bronislava Gorr, H.-J. Christ, J. Müller, B. Butz, H. Chen, A. Kauffmann and M. Heilmaier, On the Oxidation Mechanism of Refractory High Entropy Alloys, Corros. Sci., 2019, 159, 108161. https://doi.org/10.1016/j.corsci.2019.108161CrossRef

33.

N. Becker and R. Dronskowski, A First-Principles Study on New High-Pressure Metastable Polymorphs of MoO₂, J. Solid State Chem., 2016, 237, p 404–410. https://doi.org/10.1016/j.jssc.2016.03.002CrossRef

34.

X. Yang, S. Dong, J. Zeng, X. Zhou, J. Jiang, L. Deng and X. Cao, Sliding Wear Characteristics of Plasma-Sprayed Cr₂O₃ Coatings with Incorporation of Metals and Ceramics, Ceram. Int., 2019, 45, p 20243–20250. https://doi.org/10.1016/j.ceramint.2019.06.297CrossRef

35.

Z. Guo, A. Zhang, J. Han and J. Meng, Microstructure, Mechanical and Tribological Properties of CoCrFeNiMn High Entropy Alloy Matrix Composites with Addition of Cr₃C₂, Tribol. Int., 2020, 151, 106436. https://doi.org/10.1016/j.triboint.2020.106436CrossRef

36.

E.A. Gulbransen, K.F. Andrew and F.A. Brassart, Oxidation of Molybdenum 550°C to 1700°C, J. Electrochem. Soc., 1963, 110, p 952–959. https://doi.org/10.1016/0042-207X(64)91551-9CrossRef

37.

X.F. Lu and H.M. Wang, Microstructural Characterization and Dry Sliding Wear Resistance of MoO₂-Strengthened γ/NiMo Alloys with Different Primary Phases, Mater. Charact., 2009, 60, p 834–842. https://doi.org/10.1016/j.matchar.2009.01.016CrossRef

38.

H.-S. Ahn, I.-W. Lyo and D.-S. Lim, Influence of Molybdenum Composition in Chromium Oxide-Based Coatings on their Tribological Behavior, Surf. Coat. Technol., 2000, 133, p 351–361. https://doi.org/10.1016/S0257-8972(00)00892-6CrossRef

Title: Effect of Aluminum Content on the Tribological Properties of AlxCrTiMo Refractory High-Entropy Alloys
Authors: Ruiyang Zhang
Kelimu Tulugan
Aijun Zhang
Junhu Meng
Jiesheng Han
Publication date: 23-09-2021
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2022
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06243-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2022

Fabrication and Characterization of Nickel Microtubes through Electroforming: Deposition Optimization Using Evolutionary Algorithms

Constitutive Modeling of Flow Behavior and Processing Maps of a Low-Carbon Steel

A Non-invasive Technique to Estimate the Onset of Creep Strength Deterioration

Study on the Austemperability of Thin-wall Ductile Cast Iron Produced by High-Pressure Die-casting

Elastoplastic Characterization of Zn-Cu-Ti Alloy Sheets: Experiments, Modeling, and Simulation

Effect of Susceptors on Joining of AA6061-T6 to AZ31B by Microwave Hybrid Heating

Premium Partners