Top

Published in:

19-02-2021 | Original Research

Effect of coir fiber and TiC nanoparticles on basalt fiber reinforced epoxy hybrid composites: physico–mechanical characteristics

Authors: Mohammed Nadedm Arshad, H. Mohit, M. R. Sanjay, Suchart Siengchin, Anish Khan, Maha Moteb Alotaibi, Abdullah M. Asiri, Malik Abdul Rub

Published in: Cellulose | Issue 6/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In the present study, the effect of coir fiber and titanium carbide (TiC) nanoparticles on physico-mechanical and thermal characteristics of basalt fiber reinforced bio/ synthetic epoxy hybrid composites were investigated. Two types of composites were prepared using bio epoxy Sr 33 and synthetic epoxy YD-535 LV, the similar fabrication method, the same volume fractions, static stiffness, and comparable densities. The flexural, tensile, impact, porosity, water absorption tests were carried out, and the tensile fracture condition examined. Analytical methods, such as FTIR, SEM, and TGA, have been conducted to study the structures' modification. Results from this investigation signified that the addition of coir fiber and TiC nanoparticles showed a significant enhancement in mechanical and thermal characteristics with the effect of the highest load transfer between the fillers and matrix materials. The newly developed epoxy hybrid composites have higher resistance from a change in temperature than the pure polymer sample, as evident from thermal stability analysis.

previous article A novel design for nanocellulose reinforced urea–formaldehyde resin: a breakthrough in amino resin synthesis and biocomposite manufacturing

next article Pyrolysis characteristics of cellulosic biomass in the presence of alkali and alkaline-earth-metal (AAEM) oxalates

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Abhisek S, Sanjay MR, George R, Siengchin S, Jyotishkumar P, Pruncu CI (2018) Development of new hybrid Phoenix pusilla/carbon/fish bone filler reinforced polymer composites. J Chin Adv Mater Soc 6(4):553–560. https://doi.org/10.1080/22243682.2018.1522599CrossRef

Agunsoye JO, Aigbodion VS (2013) Bagasse filled recycled polyethylene bio-composites: morphological and mechanical properties study. Results Phys 3:187–194. https://doi.org/10.1016/j.rinp.2013.09.003CrossRef

Agunsoye JO, Isaac TS, Samuel SO (2012) Study of mechanical behaviour of coconut shell reinforced polymer matrix composite. J Miner Mater Charact Eng 11(8):774–779. https://doi.org/10.4236/jmmce.2012.118065CrossRef

Arpitha GR, Sanjay MR, Senthamaraikannan P, Barile C, Yogesha B (2017) Hybridization effect of sisal/glass/epoxy/filler based woven fabric reinforced composites. Exp Tech 41:577–584. https://doi.org/10.1007/s40799-017-0203-4CrossRef

Athith D, Sanjay MR, Yashas Gowda TG, Madhu P, Arpitha GR, Yogesha B, Omri MA (2018) Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites. J Ind Text. 48(4):713–737. https://doi.org/10.1177/1528083717740765CrossRef

Awwad E, Mabsout M, Hamad B, Farran MT, Khatib H (2012) Studies on fiber reinforced concrete using industrial hemp fibers. Constr Build Mater 35:710–717. https://doi.org/10.1016/j.conbuildmat.2012.04.119CrossRef

Azwa ZN, Yousif BF (2013) Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation. Polym Degrad Stab 98:2752–2759. https://doi.org/10.1016/j.polymdegradstab.2013.10.008CrossRef

Balaji A, Karthikeyan B, Swaminathan J, Sundar Raj C (2019) Effect of filler content of chemically treated short bagasse fiber-reinforced cardanol polymer composites. J Nat Fibers 16(4):613–627. https://doi.org/10.1080/15440478.2018.1431829CrossRef

Bénard Q, Fois M, Grisel M (2005b) Influence of fibre reinforcement and peel ply surface treatment towards adhesion of composite surfaces. Int J Adhes Adhes 25:404–409. https://doi.org/10.1016/j.ijadhadh.2004.11.006CrossRef

Bénard Q, Fois M, Grisel M (2005a) Peel ply surface treatment for composite assemblies: Chemistry and morphology effects. Compos Part A Appl Sci Manuf 36:1562–1568. https://doi.org/10.1016/j.compositesa.2005.02.012CrossRef

Bénard Q, Fois M, Grisel M, Laurens P, Joubert F (2009) Influence of the polymer surface layer on the Adhesion of polymer matrix composites. J Thermoplast Compos Mater 22:51–61. https://doi.org/10.1177/0892705708091606CrossRef

Bharath KN, Sanjay MR, Jawaid M, Harisha BS, Siengchin S (2019) Effect of stacking sequence on properties of coconut leaf sheath/jute/E-glass reinforced phenol formaldehyde hybrid composites. J Indus Text 49(1):3–2CrossRef

Bharath KN, Madhu P, Gowda TY, Sanjay MR, Kushvaha V, Siengchin S (2020) Alkaline effect on characterization of discarded waste of Moringa oleifera fiber as a potential eco-friendly reinforcement for biocomposites. J Polym Environ 28(11):2823–36. https://doi.org/10.1007/s10924-020-01818-4CrossRef

Borrego LP, Costa JDM, Ferreira JAM, Silva H (2014) Fatigue behaviour of glass fibre reinforced epoxy composites enhanced with nanoparticles. Compos B Eng 62(21):65–72. https://doi.org/10.1016/j.compositesb.2014.02.016CrossRef

Burchill PJ, Kootsookos A, Lau M (2001) Benefits of toughening a vinyl ester resin matrix on structural materials. J Mater Sci 36(17):4239–4247. https://doi.org/10.1023/A:1017937509700CrossRef

Chen W, Liu Y, Xu C, Liu Y, Wang Q (2017) Synthesis and properties of an intrinsic flame retardant silicone rubber containing phosphaphenanthrene structure. RSC Adv 7:39786–39795. https://doi.org/10.1039/C7RA06798DCrossRef

Colombo C, Vergani L, Burman M (2012) Static and fatigue characterisation of new basalt fibre reinforced composites. Compos Struct 94:1165–1174. https://doi.org/10.1016/j.compstruct.2011.10.007CrossRef

Dan-asabe B, Yaro AS, Yawas DS, Aku SY, Samotu IA, Abubakar U, Obada DO (2016) Mechanical, spectroscopic and micro-structural characterization of banana particulate reinforced PVC composite as piping material. Tribol Indus 38(2):255–266. https://doaj.org/article/1881a705951d4bb793dc4ff0fd0aadd8

Deak T, Czigany T (2009) Chemical composition and mechanical properties of basalt and glass fibers: a comparison, text. Res J 79:645–651. https://doi.org/10.1177/0040517508095597CrossRef

Desai T, Keblinski P, Kumar SK (2005) Molecular dynamics simulations of polymer transport in nanocomposites. J Chem Phys 122:134910. https://doi.org/10.1063/1.1874852CrossRefPubMed

Dinesh S, Kumaran P, Mohanamurugan S, Vijay R, Lenin Singaravelu D, Vinod A, Sanjay MR, Siengchin S (2020) Influence of wood dust fillers on the mechanical, thermal, water absorption and biodegradation characteristics of jute fiber epoxy composites. J Polym Res 27(9):1–13. https://doi.org/10.1007/s10965-019-1975-2CrossRef

Dorigato A, Pegoretti A (2012) Fatigue resistance of basalt fibers-reinforced laminates. J Compos Mateverr 46:1773–1785. https://doi.org/10.1177/0021998311425620CrossRef

Dorigato A, Pegoretti A (2014) Flexural and impact behaviour of carbon/basalt fibers hybrid laminates. J Compos Mater 48:1121–1130. https://doi.org/10.1177/0021998313482158CrossRef

Dutton S, Kelly D, Baker A (2004) Composite materials for aircraft structures. American Institute of Aeronautics and Astronautics Inc, Reston

Eskizeybek V, Ulus H, Kaybal HB, Şahin ÖS, Avcı A (2018) Static and dynamic mechanical responses of CaCO3 nanoparticle modified epoxy/carbon fiber nanocomposites. Compos B Eng 140:223–231. https://doi.org/10.1016/j.compositesb.2017.12.013CrossRef

Ganapathy T, Sathiskumar R, Sanjay MR, Senthamaraikannan P, Saravanakumar SS, Jyotishkumar P, Siengchin S (2019) Effect of graphene powder on banyan aerial root fibers reinforced epoxy composites. J Nat Fiber. https://doi.org/10.1080/15440478.2019.1675219CrossRef

Ganesan K, Kailasanathan C, Sanjay MR, Senthamaraikannan P, Saravanakumar SS (2020) A new assessment on mechanical properties of jute fiber mat with egg shell powder/nanoclay-reinforced polyester matrix composites. J Nat Fiber 17(4):482–490. https://doi.org/10.1080/15440478.2018.1500340CrossRef

Gopinath A, Senthil Kumar M, Elayaperumal A (2014) Experimental investigations on mechanical properties of jute fiber reinforced composites with polyester and epoxy resin matrices. Procedia Eng 97:2052–2063. https://doi.org/10.1016/j.proeng.2014.12.448CrossRef

Grassie N, Guy MI, Tennent NH (1986) Degradation of epoxy polymers: part 4ethermal degradation of bisphenol-A diglycidyl ether cured with ethylene diamine. Polym Degrad Stab 14:125–137. https://doi.org/10.1016/0141-3910(86)90011-XCrossRef

Grdadolnik J, Maréchal Y (2002) Urea and urea-water solutions – an infrared study. J Mol Struct 615:177–189. https://doi.org/10.1016/S0022-2860(02)00214-4CrossRef

Husseinsyah S, Mostapha M (2011) The effect of filler content on properties of coconut shell filled polyester composites. Malaysian Polym J 6(1):87–97. https://doi.org/10.4236/jmmce.2012.118065CrossRef

Ishida H, Lee YH (2001) Study of hydrogen bonding and thermal properties of polybenzoxazine and poly-(ε-caprolactone) blends. Polym Sci B Polym Phys 39:736–749. https://doi.org/10.1002/1099-0488(20010401)39:7%3c736::AID-POLB1048%3e3.0.CO;2-RCrossRef

Islam MM, Kabir H, Gafur MA, Bhuiyan MMR, Kabir MA, Qadir MR, Ahmed F (2015) Study on physio-mechanical properties of rice husk ash polyester resin composite. Int Lett Chem Phys Astron. https://doi.org/10.18052/www.scipress.com/ILCPA.53.95CrossRef

Jagadeesh P, Yashas GTG, Madhu P, Sanjay MR, Siengchin S (2020) Effect of natural filler materials on fiber reinforced hybrid polymer composites: An Overview. J Nat Fiber. https://doi.org/10.1080/15440478.2020.1854145CrossRef

Jamshaid H, Mishra R, Basra S, Rajput AW, Hassan T, Petru M, Choteborsky R, Muller M (2020) Lignocellulosic Natural Fiber Reinforced Bisphenol F Epoxy Based Bio-composites: Characterization of Mechanical Electrical Performance. J Nat Fiber. https://doi.org/10.1080/15440478.2020.1843586CrossRef

Jawaid M, Abdul Khalil HPS, Abu Bakar A (2011) Chemical resistance, void content and tensile properties of oil palm/jute fiber reinforced polymer hybrid composites. Mater Des 32:1014–1019. https://doi.org/10.1016/j.matdes.2010.07.033CrossRef

Jenish I, Chinnasamy SGV, Basavarajappa S, Indran S, Divya D, Liu Y, Sanjay MR, Siengchin S (2020) Tribo-Mechanical characterization of carbonized coconut shell micro particle reinforced with Cissus quadrangularis stem fiber/epoxy novel composite for structural application. J Nat Fiber. https://doi.org/10.1080/15440478.2020.1838988CrossRef

Johnsen BB, Kinloch AJ, Mohammed RD, Taylor AC, Sprenger S (2007) Toughening mechanisms of nanoparticle-modified epoxy polymers. Polym 48(2):530–541. https://doi.org/10.1016/j.polymer.2006.11.038CrossRef

Jothibasu S, Mohanamurugan S, Vijay R, Lenin Singaravelu D, Vinod A, Sanjay MR (2020) Investigation on the mechanical behavior of areca sheath fibers/jute fibers/glass fabrics reinforced hybrid composite for light weight applications. J Indus Text 49(8):1036–60. https://doi.org/10.1177/1528083718804207CrossRef

Kabir H, Gafur MA, Ahmed F, Begum F, Qadir MR (2014) Investigation of physical and mechanical properties of bamboo fiber and PVC foam sheet composites. Universal J Mater Sci 2(6):119–124. http://www.hrpub.org/journals/article_info.php?aid=2230

Kamaraj M, Dodson EA, Datta S (2019) Effect of graphene on the properties of flax fabric reinforced epoxy composites. Adv Compos Mater. https://doi.org/10.1080/09243046.2019.1709679CrossRef

Kandola BK, Biswas B, Price D, Horrocks AR (2010) Studies on the effect of different levels of toughener and flame retardants on thermal stability of epoxy resin. Polym Degrad Stab 95:144–152. https://doi.org/10.1016/j.polymdegradstab.2009.11.040CrossRef

Kanerva M, Saarela O (2013) The peel ply surface treatment for adhesive bonding of composites: a review. Int J Adhes Adhes 43:60–69. https://doi.org/10.1016/j.ijadhadh.2013.01.014CrossRef

Karakaya N, Papila M, Ozkoc G (2020) Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: ‘An assessment of the interface. Compos Part A Appl Sci Manuf 131:105771. https://doi.org/10.1016/j.compositesa.2020.105771CrossRef

Kessler E, Gadow R, Straub J (2016) Basalt, glass and carbon fibers and their fiber reinforced polymer composites under thermal and mechanical load. AIMS Mater Sci 3:1561–1576. https://doi.org/10.3934/matersci.2016.4.1561/pdfCrossRef

Kuburi L, Dauda M, Obada D, Umaru S, Dodoo-Arhin D, Iliyasu I, Balogun M, Mustapha S (2017) Effects of coir fiber loading on the physio-mechanical and morphological properties of coconut shell powder filled low density polyethylene composites. Procedia Manuf 7:138–144. https://doi.org/10.1016/j.promfg.2016.12.036CrossRef

Lapena MH, Marinucci G (2017) Mechanical characterization of basalt and glass fiber epoxy composite tube. Mater Res 21:226–227. https://doi.org/10.1590/1980-5373-mr-2017-0324CrossRef

Lecompte T, Perrot A, Subrianto A, Le Duigou A, Ausias G (2015) A novel pullout device used to study the influence of pressure during processing of cementbased material reinforced with coir. Constr Build Mater 78:224–233. https://doi.org/10.1016/j.conbuildmat.2014.12.119CrossRef

Liang YL, Pearson RA (2009) Toughening mechanisms in epoxy–silica nanocomposites (ESNs). Polym 50(20):4895–4905. https://doi.org/10.1016/j.polymer.2009.08.014CrossRef

Lin JC, Chang LC, Nien MH, Ho HL (2006) Mechanical behavior of various nanoparticle filled composites at low-velocity impact. Compos Struct 74(1):30–36. https://doi.org/10.1016/j.compstruct.2005.03.006CrossRef

Liu Q, Shaw MT, Parnas RS, McDonnell AM (2006) Investigation of basalt fiber composite aging behavior for applications in transportation. Polym Compos 27:475–483. https://doi.org/10.1002/pc.20215CrossRef

Lopresto V, Leone C, De Iorio I (2011) Mechanical characterisation of basalt fibre reinforced plastic. Compos B Eng 42:717–723. https://doi.org/10.1016/j.compositesb.2011.01.030CrossRef

Ma G, Yan L, Shen W, Zhu D, Huang L, Kasal B (2018) Effects of water, alkali solution and temperature ageing on water absorption, morphology and mechanical properties of natural FRP composites: Plant-based jute vs. mineral-based basalt. Compos Part B Eng 153:398–412CrossRef

Madhu P, Sanjay MR, Senthamaraikannan P, Pradeep S, Saravanakumar SS, Yogesha B (2019) A review on synthesis and characterization of commercially available natural fibers: Part-I. J Nat Fiber 16(8):1132–1144. https://doi.org/10.1080/15440478.2018.1453433CrossRef

Madsen B, Thygsen A, Lilholt H (2007) Plant fibre composites – porosity and volumetric interaction. Compos Sci Technol 67(7–8):1584–1600. https://doi.org/10.1016/j.compscitech.2006.07.009CrossRef

Manjula R, Raju N, Chakradhar R, Johns J (2018) Effect of thermal aging and chemical treatment on tensile properties of coir fiber. J Nat Fibers 15(1):112–121. https://doi.org/10.1080/15440478.2017.1321513CrossRef

Matykiewicz D (2020) Hybrid Epoxy Composites with Both Powder and Fiber Filler: A Review of Mechanical and Thermomechanical Properties. Mater 13(8):1802. https://doi.org/10.3390/ma13081802CrossRef

Matykiewicz D, Barczewski M, Knapski D, Skorczewska K (2017) Hybrid effects of basalt fibers and basalt powder on thermomechanical properties of epoxy composites. Compos Part B Eng 125:157–164. https://doi.org/10.1016/j.compositesb.2017.05.060CrossRef

Moeller Herbert W (2008) Influence of epoxy amine ratio on degradation of epoxy silica hybrid materials. In: Progress in polymer degradation and stability research. Nova Science Publisher, New York

Mohit H, Selvan VAM (2018) A comprehensive review on surface modification, structure interface and bonding mechanism of plant cellulose fiber reinforced polymer based composites. Compos Interf 25(5–7):629–667. https://doi.org/10.1080/09276440.2018.1444832CrossRef

Mohit H, Selvan VAM (2019b) Physical and thermomechanical characterization of the novel aluminum silicon carbide-reinforced polymer nanocomposites. Iran Polym J 28:823–837. https://doi.org/10.1007/s13726-019-00746-yCrossRef

Mohit H, Selvan VAM (2019a) Effect of a Novel Chemical Treatment on Nanocellulose Fibers for Enhancement of Mechanical, Electrochemical and Tribological Characteristics of Epoxy Bio-nanocomposites. Fiber Polym 20:1918–1944. https://doi.org/10.1007/s12221-019-1224-7CrossRef

Mohit H, Selvan VAM (2020b) Effect of a novel chemical treatment on the physico-thermal properties of sugarcane nanocellulose fiber reinforced epoxy nanocomposites. Int Polym Proc 35(2):211–220. https://doi.org/10.3139/217.3855CrossRef

Mohit H, Selvan VAM (2020a) Effect of Al-SiC nanoparticles and cellulose fiber dispersion on the thermomechanical and corrosion characteristics of polymer nanocomposites. Polym Compos 41:1878–1899. https://doi.org/10.1002/pc.25505CrossRef

Mohit H, Sanjay MR, Vinod K, Dhakal HN, Siengchin S (2020) A comprehensive review on mechanical, electromagnetic radiation shielding, and thermal conductivity of fibers/inorganic fillers reinforced hybrid polymer composites. Polym Compos 41(10):3940–3965. https://doi.org/10.1002/pc.25703CrossRef

Monaldo E, Nerilli F, Vairo G (2019) Basalt-based fiber-reinforced materials and structural applications in civil engineering. Compos Struct 214:246–263. https://doi.org/10.1016/j.compstruct.2019.02.002CrossRef

Mouritz AP (2012) Introduction to aerospace materials. Woodhead Publishing, CambridgeCrossRef

Munawar SS, Umemura K, Kawai S (2007) Characterization of the morphological, physical, and mechanical properties of seven nonwood plant fiber bundles. J Wood Sci 53(2):108–113. https://doi.org/10.1007/s10086-006-0836-xCrossRef

Pickering KL, Efendy MGA, Le TM (2016) A review of recent developments in natural fibre composites and their mechanical performance. Compos Part A Appl Sci Manuf 83:98–112. https://doi.org/10.1016/j.compositesa.2015.08.038CrossRef

Prolongo SG, Jiménez-Suárez A, Moriche R, Urena A (2018) Influence of thickness and lateral size of graphene nanoplatelets on water uptake in epoxy/graphene nanocomposites. Appl Sci 8:1550. https://doi.org/10.3390/app8091550CrossRef

Puttegowda M, Rangappa SM, Jawaid M, Shivanna P, Basavegowda Y, Saba N. Potential of natural/synthetic hybrid composites for aerospace applications. In Sustainable composites for aerospace applications 2018 (pp 315–351). Woodhead Publishing. https://www.sciencedirect.com/science/article/pii/B9780081021316000219

Puttegowda M, Rangappa S, Khan A, Al-Zahrani SA, Al Otaibi A, Shivanna P, Moure MM, Siengchin S (2020) Preparation and characterization of new hybrid polymer composites from Phoenix pusilla fibers/E-glass/carbon fabrics on potential engineering applications: effect of stacking sequence. Polym Compos. 41(11):4572–4582. https://doi.org/10.1002/pc.25734CrossRef

Quagliarini E, Monni F, Lenci S, Bondioli F (2012) Tensile characterization of basalt fiber rods and ropes: a first contribution. Constr Build Mater 34:372–380. https://doi.org/10.1016/j.conbuildmat.2012.02.080CrossRef

Rafiee MA, Rafiee J, Wang Z, Song H, Yu Z-Z, Koratkar N (2009) Enhanced mechanical properties of nanocomposites at low graphene content. ACS Nano 3:3884–3890. https://doi.org/10.1021/nn9010472CrossRefPubMed

Ramesh M, Deepa C, Kumar LR, Sanjay MR, Siengchin S (2020) Life cycle and environmental impact assessments on processing of plant fibers and its bio-composites: a critical review. J Ind Tex. https://doi.org/10.1177/1528083720924730CrossRef

Ricciardi MR, Papa I, Langella A, Langella T, Lopresto V, Antonucci V (2018) Mechanical properties of glass fibre composites based on nitrile rubber toughened modified epoxy resin. Compos B Eng 139:259–267. https://doi.org/10.1016/j.compositesb.2017.11.056CrossRef

Sanjay MR, Siengchin S (2021) Exploring the applicability of natural fibers for the development of biocomposites. Exp Polym Lett 15(3):193–193. https://doi.org/10.3144/expresspolymlett.2021.17CrossRef

Sanjay MR, Yogesha B (2018) Studies on hybridization effect of jute/kenaf/E-glass woven fabric epoxy composites for potential applications: Effect of laminate stacking sequences. J Indus Text 47(7):1830–1848. https://doi.org/10.1177/1528083717710713CrossRef

Sanjay MR, Madhu P, Jawaid M, Senthamaraikannan P, Senthil S, Pradeep S (2018) Characterization and properties of natural fiber polymer composites: A comprehensive review. J CleanProd 172:566–581 https://www.sciencedirect.com/science/article/abs/pii/S0959652617323946

Sanjay MR, Siengchin S, Jyotishkumar P, Jawaid M, Pruncu CI, Khan A (2019) A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization. Carbohydr Polym 207(1):108–121. https://doi.org/10.1016/j.carbpol.2018.11.083CrossRef

Sanjay MR, Dhakal HN, Siengchin S (2020) Green-composites: Ecofriendly and Sustainability. Appl Sci Eng Prog 13(3):183–184 http://www.ojs.kmutnb.ac.th/index.php/ijst/article/view/3681/2782

Schnell I, Brown SP, Low HY, Ishida H, Spiess HW (1998) An investigation of hydrogen bonding in benzoxazine dimers by fast magic-angle spinning and double-quantum ¹H NMR spectroscopy. J Am Chem Soc 120:11784–11795. https://doi.org/10.1021/ja982766tCrossRef

Selvaraj V, Raghavarshini TR, Alagar M (2020) Development and characterization of palm flower carbon reinforced DOPO-urea diamine based cardanol benzoxazine-epoxy hybrid composites. Polym Eng Sci. https://doi.org/10.1002/pen.25331CrossRef

Setty VKSN, Goud G, Sanjay MR, Siengchin S (2020b) Raw and chemically treated bio-waste filled (Limonia acidissima shell powder) vinyl ester composites: Physical, mechanical, moisture absorption properties, and microstructure analysis. Vinyl Add Technol. https://doi.org/10.1002/vnl.21787CrossRef

Setty VKSN, Goud G, Chikkegowda SP, Sanjay MR, Siengchin S (2020a) Characterization of chemically treated limonia acidissima (wood apple) shell powder: physicochemical, thermal, and morphological properties. J Nat Fiber. https://doi.org/10.1080/15440478.2020.1853925CrossRef

Sheinbaum M, Sheinbaum L, Weizman O, Dodiuk H, Kenig S (2019) Toughening and enhancing mechanical and thermal properties of adhesives and glass-fiber reinforced epoxy composites by brominated epoxy. Compos B Eng 165:604–612. https://doi.org/10.1016/j.compositesb.2019.02.020CrossRef

Shishevan FA, Akbulut H, Mohtadi-Bonab MA (2017) Low velocity impact behavior of basalt fiber-reinforced polymer composites. J Mater Eng Perform 26:2890–2900. https://doi.org/10.1007/s11665-017-2728-1CrossRef

Starkova O, Chandrasekaran S, Prado LASA, Tolle F, Mulhaupt R, Schulte K (2013) Hydrothermally resistant thermally reduced graphene oxide and multi-wall carbon nanotube-based epoxy nanocomposites. Polym Degrad Stab 98:519–526. https://doi.org/10.1016/j.polymdegradstab.2012.12.005CrossRef

Tran LQN, Fuentes CA, Dupont-Gillain C, van-Vuure AW, Verpoest I, (2011) Wetting analysis and surface characterisation of coir fibres used as reinforcement for composites. Colloid Surf Physicochem Eng Asp 377:251–260. https://doi.org/10.1016/j.colsurfa.2011.01.023CrossRef

Ulus H, Şahin ÖS, Avcı A (2015) Enhancement of flexural and shear properties of carbon fiber/epoxy hybrid nanocomposites by boron nitride nano particles and carbon nano tube modification. Fibers Polym 16(12):2627–2635. https://doi.org/10.1007/s12221-015-5603-4CrossRef

Verma D, Gope P, Shandilya A, Gupta A, Maheshwari M (2013) Coir fibre reinforcement and application in polymer composites: a review. J Mater Environ Sci 4(2):263–276. https://www.jmaterenvironsci.com/Document/vol4/vol4_N2/33-JMES-363-2013-Verma.pdf

Vinay SS, Sanjay MR, Siengchin S, Venkatesh CV (2020) Effect of Al2O3 nanofillers in basalt/epoxy composites: Mechanical and tribological properties. Polym Compos. https://doi.org/10.1002/pc.25927CrossRef

Vinod A, Sanjay MR, Siengchin S, Jyotishkumar P (2020) Renewable and sustainable biobased materials: an assessment on biofibers, biopolymers and biocomposites. J Clean Prod 258:120978. https://doi.org/10.1016/j.jclepro.2020.120978CrossRef

Visakh PM, Yoshihiko A (2015) Thermal degradation of polymer blends, composites and nanocomposites (engineering materials). Springer, New YorkCrossRef

Wang F, Drzal LT, Qin Y, Huang Z (2016) Size effect of graphene nanoplatelets on the morphology and mechanical behavior of glass fiber/epoxy composites. J Mater Sci 51:3337–3348. https://doi.org/10.1007/s10853-015-9649-xCrossRef

Wang B, Fu Q, Li H, Qi L, Liu Y (2021) Mechanisms of simultaneously enhanced mechanical and tribological properties of carbon fabrics/phenolic resin composites reinforced with graphite nanoplatelets. J Alloy Compd 854:157176. https://doi.org/10.1016/j.jallcom.2020.157176CrossRef

Xu S, He J, Jin S, Tan B (2018) Heteroatom-rich porous organic polymers constructed by benzoxazine linkage with high carbon dioxide adsorption affinity. J Colloid Interface Sci 509:457–462. https://doi.org/10.1016/j.jcis.2017.09.009CrossRefPubMed

Yan L, Chouw N, Jayaraman K (2015) Effect of UV and water spraying on the mechanical properties of flax fabric reinforced polymer composites used for civil engineering applications. Mater Des 71:17–25. https://doi.org/10.1016/j.matdes.2015.01.003CrossRef

Yan L, Chouw N, Huang L, Kasal B (2016) Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced polymer composites and reinforced-cementitious composites. Constr Build Mater 112:168–182. https://doi.org/10.1016/j.conbuildmat.2016.02.182CrossRef

Yao Y, Zhu D, Zhang H, Li G, Mobasher B (2016) Tensile behaviors of basalt, carbon, glass, and aramid fabrics under various strain rates. J Mater Civ Eng 28:04016081. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001587CrossRef

Yashas GTG, Sanjay MR, Jyotishkumar P, Siengchin S (2019) Natural Fibers as Sustainable and Renewable Resource for Development of Eco-friendly Composites: A Comprehensive Review. Front Mater 6:1–14. https://doi.org/10.3389/fmats.2019.00226CrossRef

Yorseng K, Sanjay MR, Tengsuthiwat J, Harikrishnan P, Jyotishkumar P, Siengchin S, Moure MM (2019) Information in United States Patents on works related to ‘Natural Fibers’: 2000–2018. Curr Mater Sci 12(1):4–76. https://doi.org/10.2174/1874464812666190515115020CrossRef

Zaman HU, Beg M (2014) Preparation, structure, and properties of the coir fiber/ polypropylene composites. J Compos Mater 48(26):3293–3301. https://doi.org/10.1177/0021998313508996CrossRef

Zaman I, Kuan H-C, Dai J, Kawashima N, Michelmore A, Sovi A, Dong S, Luong L, Ma J (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale 4:4578–4586. https://doi.org/10.1039/C2NR30837ACrossRefPubMed

Zhang H, Zhang Z, Friedrich K, Eger C (2006) Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content. Acta Mater 54(7):1833–1842. https://doi.org/10.1016/j.actamat.2005.12.009CrossRef

Zhang T, Wang J, Feng T, Wang H, Ramdani N, Derradji M, Xu X, Liu W, Tang T (2015) A novel high performance oxazine derivative: design of tetrafunctional monomer, step-wise ring-opening polymerization, improved thermal property and broadened processing window. RSC Adv 5:33623–33631. https://doi.org/10.1039/C5RA02839FCrossRef

Title: Effect of coir fiber and TiC nanoparticles on basalt fiber reinforced epoxy hybrid composites: physico–mechanical characteristics
Authors: Mohammed Nadedm Arshad
H. Mohit
M. R. Sanjay
Suchart Siengchin
Anish Khan
Maha Moteb Alotaibi
Abdullah M. Asiri
Malik Abdul Rub
Publication date: 19-02-2021
Publisher: Springer Netherlands
Published in: Cellulose / Issue 6/2021
Print ISSN: 0969-0239
Electronic ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-021-03752-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Other articles of this Issue 6/2021

Preparation, characterization and testing of flame retardant cotton cellulose material: flame retardancy, thermal stability and flame-retardant mechanism

A novel ε-polylysine-derived durable phosphorus‐nitrogen‐based flame retardant for cotton fabrics

Fabrication of reduced graphene oxide-cellulose nanofibers based hybrid film with good hydrophilicity and conductivity as electrodes of supercapacitor

Application of novel butane-1,4-dioic acid-functionalized cellulosic biosorbent for aqueous cobalt ion sequestration

Insights into the microstructures and reinforcement mechanism of nano-fibrillated cellulose/MXene based electromagnetic interference shielding film

Facile in situ synthesis of ZIF-67/cellulose hybrid membrane for activating peroxymonosulfate to degrade organic contaminants