Top

Journal of Materials Science

Published in:

01-02-2010

Effect of heat treatment on the mechanical properties of North American jack pine: thermogravimetric study

Authors: Duygu Kocaefe, Sandor Poncsak, Junjun Tang, Mohamed Bouazara

Published in: Journal of Materials Science | Issue 3/2010

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Heat treatment improves dimensional stability of wood, reduces its decay, and darkens its color. However, mechanical properties of wood can deteriorate during the heat treatment. The effect of heat-treatment conditions (maximum treatment temperature, heating rate, exposure time at the maximum heat-treatment temperature, and the gas humidity) on the mechanical properties of North American jack pine (Pinus banksiana) was studied using thermogravimetric analyzer. This type of study permits the identification of the best treatment conditions which will minimize reduction of mechanical properties of jack pine. The results showed that the degree of change in bending strength, hardness, screw withdrawal strength, and dimensional stability of jack pine during heat treatment depends strongly on the treatment conditions used. Therefore, great care should be taken to select the treatment conditions. Thermogravimetric analysis can be used as a first step for selection.

previous article Effect of moisture on the bending properties of thermally modified beech and spruce

next article Cyclic oxidation and wear of tungsten rods in contact with glass in atmospheric air

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Fengel D, Wegener G (1984) Wood chemistry, ultrastructure reactions. DeGruyter, Berlin

Sivonen H, Maunu SL, Sundholm F, Jämsä S, Viitaniemi P (2002) Holzforschung 56:648CrossRef

Hakkou M, Pétrissens M, Zoulalian A, Gérardin P (2005) Polym Degrad Stab 89:1CrossRef

Kamdem DP, Pizzi A, Jermammaud A (2002) Holz als Roh- und Werkstoff 60:1CrossRef

Kosikova B, Hricovini M, Cosentino C (1999) Wood Sci Technol 33:373

Tjeerdsma BF, Boonstra M, Pizzi A, Tekely H, Millitz H (1998) Holz als Roh- und Werkstoff 56:149CrossRef

Homan W, Tjeerdsma B, Beckers E, Joressen A (2000) Structural and other properties of modified wood. Congress WCTE, Whistler, Canada, pp 3.5.1-1–3.5.1.-8

Tjeerdsma B, Militz H (2005) Holz als Roh- und Werkstoff 63:102CrossRef

Avat F (1993) Contribution à l’ètude des traitements thermiques du bois jusqu’à 300°C: transformations chimiques et caractérisations physico-chimiques, PhD Thesis, École des Mines de Saint-Etienne, France

10.

Stamm AJ, Burr HK, Kline AA (1946) Ind Eng Chem 38:630CrossRef

11.

Stamm AJ (1956) Ind Eng Chem 48:413CrossRef

12.

Dirol D, Guyonnet R (1993) The improvement of wood durability by retification process. Document no IRG/WP 98–40015. International Research Group on Wood Protection, Stockholm, Sweden

13.

Pavlo B, Niemz P (2003) Holzforschung 57:539CrossRef

14.

Kocaefe D, Shi JL, Yang DQ, Bouazara M (2008) For Prod J 59:88

15.

Sanderman W, Augustin H (1963) Holz als Roh- und Werkstoff 21:256CrossRef

16.

Fengel D (1966) Holz als Roh- und Werkstoff 24:9CrossRef

17.

Viitaniemi P (1997) Thermowood—modified wood for improved performance. Wood: the ecological material In: 4th Eurowood symposium, Stockholm, Sweeden, September 22–23, Tratek. Swedish institute for wood technology research, pp 67–70

18.

Santos JA (2000) Wood Sci Technol 34:39CrossRef

19.

Chanrion P, Schreiber J (2002) Les différents procédés, Bois traité par haute température, Edition CTBA, Paris

20.

Yildiz S, Çolakoglu G, Yildiz ÜC, Gezer ED, Temiz A (2002) Effects of heat treatment on modulus of elasticity of beech wood, document no. IRG/WP 02–40222. International Research Group on Wood Protection, Stockholm, Sweden

21.

Poncsak S, Kocaefe D, Bouazara M, Pichette A (2006) Wood Sci Technol 40:647CrossRef

22.

Kocaefe D, Chaudry B, Poncsak S, Bouazara M, Pichette A (2007) J Mater Sci 42:854. doi:https://doi.org/10.1007/s10853-006-0054-3 CrossRef

23.

Vernois M (2001) Heat treatment of wood in France—state of art. In: Rapp AO (ed) Proceedings of special seminar review on heat treatment of wood, Antibes, France February 9. BFH the federal research centre for forestry and forest products, Hamburg, pp 39–46

24.

Syrjanen T, Kestopuu O, Jamsa S, Viitaniemi P (2001) Heat treatment of wood in Finland—state of the art. In: Rapp AO (ed) Proceedings of special seminar on heat treatment of wood, antibes, France. BFH the Federal Research Centre for Forestry and Forest Products, Hamburg, pp 11–19

25.

ASTM International (2004) Annual book of ASTM standards. Section 4 (construction), 4.10 (wood). ASTM International, PA

26.

Spiegelberg HL (1966) The effect of hemicelluloses on the mechanical properties of individual pulp fibers. Thesis, The Institute for Paper Chemistry, Lawrence University, Appleton, Wisconsin

27.

Sørensen JS (1997) Comparison of wet oxidation and enzyme treatment. Bachelor project, Plant Fibre Laboratory, Department of Agricultural Sciences, The Royal Veterinary and Agricultural University, Copenhagen

28.

Kocaefe D, Poncsak S, Boluk Y (2008) BioResources 3:517

29.

Borrega M, Kärenlampi PP (2008) J Wood Sci 54:323CrossRef

30.

Ross J (2004) Étude des composés chimiques extraits des lixiviats issus de la thermotransformation du pin gris (Pinus banksiana Lamb). Master Thesis, University of Quebec at Chicoutimi, Chicoutimi, Québec, Canada

31.

Kubojima Y, Wada M, Suzuki Y, Tonosaki M (2001) Wood Sci Technol 35:503CrossRef

32.

Gosselink RJA, Krosse AMA, Van der Putten JC (2004) Ind Crops Prod 19:3–12CrossRef

Title: Effect of heat treatment on the mechanical properties of North American jack pine: thermogravimetric study
Authors: Duygu Kocaefe
Sandor Poncsak
Junjun Tang
Mohamed Bouazara
Publication date: 01-02-2010
Publisher: Springer US
Published in: Journal of Materials Science / Issue 3/2010
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-009-3985-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2010

Electrokinetic properties of Nd:YAG nanopowder and a high concentration slurry with ammonium poly(acrylic acid) as dispersant

Strain localization of fully dense nanocrystalline Ni sheet

Calibration of reaction parameters for the improvement of thermal stability and crystalline quality of multi-walled carbon nanotubes

A facile method for the synthesis of ZnS/polystyrene composite particles and ZnS hollow micro-spheres

Effect of initial microstructures on hot forging of Ca-containing cast Mg alloys

Preparation and characterization of electrospun poly(2,5-dicyclohexylphenylene-1,4-ethynylene) (C24H30) n /poly(ethylene oxide) (PEO) hybrid nanofibers

Premium Partners