Top

Published in:

20-01-2023 | Full Research Article

Effect of post-heat treatment on microstructure and tribological performance of AISI 410L coatings processed by laser-directed energy deposition (L-DED)

Authors: Vitor H. Meura, Jeferson T. Pacheco, Marcelo T. Veiga, Alexsandro Rabelo, Leandro J. da Silva, Júlio C. Milan, César E. da Costa

Published in: Progress in Additive Manufacturing | Issue 6/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The present work aimed to assess the effect of post-heat treatment on microstructure and tribological performance of AISI 410 clads processed by laser-directed energy deposition (L-DED) to simulate the repair of ball valve plugs used in the oil and gas industry. The coatings were deposited by L-DED process on AISI 410 substrates using an AISI 410L gas-atomized metallic powder. Coatings in the as-built and heat-treated conditions were characterized in terms of microstructure, hardness, and microabrasive wear performance. For comparison purposes, a ball valve plug of AISI 410 was also characterized. For the L-DED processing conditions used, defect-free AISI 410L coatings were obtained. The post-heat treatment had a significant effect on the microstructure and hardness of the coatings. Despite this, the coatings performance was statistically equal to the ball valve. Therefore, from the point of view of the wear performance, the results indicate that a ball valve of AISI 410 can be satisfactorily repaired by L-DED process without post-heat treatments.

previous article Accuracy evaluation of thin wall features fabricated by fused deposition modeling using reinforced composite materials

next article Effect of varying unit cell size on energy absorption behaviour of additive manufactured TPMS PETG lattice structure

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Moses D, Haider G, Henshaw J (2019) An investigation of the failure of a 1/4” ball valve. Eng Fail Anal 100:393–405. https://doi.org/10.1016/j.engfailanal.2019.02.047CrossRef

Sotoodeh K (2021) A practical guide to piping and valves for the oil and gas industry. Gulf Professional Publishing

Mnif R, Ben JMC, Elleuch R (2013) Tribological failure analysis of ball valve seals. Int J Microstruct Mater Prop 8:385–396. https://doi.org/10.1504/IJMMP.2013.057074CrossRef

Stewart M (2016) Surface production operations - facility piping and pipeline systems, 1st edn. Elsevier Science

Bae J, Chung K-H (2016) Wear characteristics of metal ball and seat for metal-seated ball valve. J Korean Soc Tribol Lubr Eng 32:32–37. https://doi.org/10.9725/kstle.2016.32.1.32CrossRef

Peng D, Dong S, Wang Z et al (2021) Characterization of the solid particle erosion of the sealing surface materials of a ball valve. Metals (Basel) 11:1–19. https://doi.org/10.3390/met11020263CrossRef

Kadoi K, Murakami A, Shinozaki K et al (2016) Crack repair welding by CMT brazing using low melting point filler wire for long-term used steam turbine cases of Cr-Mo-V cast steels. Mater Sci Eng A 666:11–18. https://doi.org/10.1016/j.msea.2016.04.035CrossRef

Odhiambo JG, Li WG, Zhao YT, Li CL (2019) Porosity and its significance in plasma-sprayed coatings. Coatings 9:1–19. https://doi.org/10.3390/coatings9070460CrossRef

Zhu Y, Yang Y, Mu X et al (2019) Study on wear and RCF performance of repaired damage railway wheels: Assessing laser cladding to repair local defects on wheels. Wear 430–431:126–136. https://doi.org/10.1016/j.wear.2019.04.028CrossRef

10.

Molina C, Araujo A, Bell K et al (2021) Fatigue life of laser additive manufacturing repaired steel component. Eng Fract Mech 241:107417. https://doi.org/10.1016/j.engfracmech.2020.107417CrossRef

11.

Deev A, Kuznetsov P, Zhukov A, Bobyr V (2017) The Structure and properties of the samples produced by selective laser melting of 410L steel-based metal powder. Phys Proced 89:31–38. https://doi.org/10.1016/j.phpro.2017.08.013CrossRef

12.

Pacheco JT, da Silva LJ, Barbetta LD et al (2020) Laser cladding of stellite-6 on AISI 316 L austenitic stainless steel: empirical-statistical modeling and parameter optimization. Lasers Manuf Mater Process. https://doi.org/10.1007/s40516-020-00132-0CrossRef

13.

Rutherford KL, Hutchings IM (1996) A micro-abrasive wear test, with particular application to coated systems. Surf Coat Technol 79:231–239. https://doi.org/10.1016/0257-8972(95)02461-1CrossRef

14.

Ardila MAN, Costa HL, De MJDB (2020) Influence of the ball material on friction and wear in microabrasion tests. Wear. https://doi.org/10.1016/j.wear.2020.203266CrossRef

15.

Lai Q, Abrahams R, Yan W et al (2018) Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels. Mater Sci Eng A 712:548–563. https://doi.org/10.1016/j.msea.2017.12.003CrossRef

16.

Mabruri E, Prifiharni S, Anwar MS et al (2018) Mechanical properties optimization of the modified 410 martensitic stainless steel by heat treatment process. Mater Today Proc 5:14918–14922. https://doi.org/10.1016/j.matpr.2018.04.030CrossRef

17.

Zhu H, Ouyang M, Hu J et al (2021) Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding. Ceram Int 47:12505–12513. https://doi.org/10.1016/j.ceramint.2021.01.108CrossRef

18.

Köse C, Topal C (2019) Effect of post weld heat treatment and heat input on the microstructure and mechanical properties of plasma arc welded AISI 410S ferritic stainless steel. Mater Res Express 6:13. https://doi.org/10.1088/2053-1591/ab09b6CrossRef

19.

Zhang D, Niu W, Cao X, Liu Z (2015) Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy. Mater Sci Eng A 644:32–40. https://doi.org/10.1016/j.msea.2015.06.021CrossRef

20.

Vashishtha N, Sapate SG, Bagde P, Rathod AB (2018) Effect of heat treatment on friction and abrasive wear behaviour of WC-12Co and Cr3C2-25NiCr coatings. Tribol Int 118:381–399. https://doi.org/10.1016/j.triboint.2017.10.017CrossRef

Title: Effect of post-heat treatment on microstructure and tribological performance of AISI 410L coatings processed by laser-directed energy deposition (L-DED)
Authors: Vitor H. Meura
Jeferson T. Pacheco
Marcelo T. Veiga
Alexsandro Rabelo
Leandro J. da Silva
Júlio C. Milan
César E. da Costa
Publication date: 20-01-2023
Publisher: Springer International Publishing
Published in: Progress in Additive Manufacturing / Issue 6/2023
Print ISSN: 2363-9512
Electronic ISSN: 2363-9520
DOI: https://doi.org/10.1007/s40964-023-00404-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2023

Breakthrough to the pragmatic evolution of direct ink writing: progression, challenges, and future

The opportunities of additive manufacturing in the creative industries: a bibliometric analysis

Incorporation of silver nanoparticles into polyamide powder for application in 3D printing

Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic

Review of additive manufacturing with 2D MXene: techniques, applications, and future perspectives

Correction: Investigating the effect of process parameters for fused filament fabrication

Premium Partners